bootstage: Support SPL

At present bootstage only supports U-Boot proper. But SPL can also consume
boot time so it is useful to have the record start there.

Add bootstage support to SPL. Also support stashing the timing information
when SPL finishes so that it can be picked up and reported by U-Boot
proper. This provides a full boot time record, excluding only the time
taken by the boot ROM.

Signed-off-by: Simon Glass <sjg@chromium.org>

4 files changed, 45 insertions, 2 deletions

diff --git a/common/Kconfig b/common/Kconfig
index a3094d9..c49199b 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -18,6 +18,15 @@ config BOOTSTAGE
 	  Calls to show_boot_progress() will also result in log entries but
 	  these will not have names.
 
+config SPL_BOOTSTAGE
+	bool "Boot timing and reported in SPL"
+	depends on BOOTSTAGE
+	help
+	  Enable recording of boot time in SPL. To make this visible to U-Boot
+	  proper, enable BOOTSTAGE_STASH as well. This will stash the timing
+	  information when SPL finishes and load it when U-Boot proper starts
+	  up.
+
 config BOOTSTAGE_REPORT
 	bool "Display a detailed boot timing report before booting the OS"
 	depends on BOOTSTAGE
diff --git a/common/Makefile b/common/Makefile
index c7c8ea4..539cf98 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -65,7 +65,6 @@ obj-$(CONFIG_USB_STORAGE) += usb_storage.o
 endif
 
 # others
-obj-$(CONFIG_BOOTSTAGE) += bootstage.o
 obj-$(CONFIG_CONSOLE_MUX) += iomux.o
 obj-$(CONFIG_MTD_NOR_FLASH) += flash.o
 obj-$(CONFIG_CMD_KGDB) += kgdb.o kgdb_stubs.o
@@ -89,6 +88,8 @@ obj-$(CONFIG_CMDLINE) += cli_readline.o cli_simple.o
 
 endif # !CONFIG_SPL_BUILD
 
+obj-$(CONFIG_$(SPL_)BOOTSTAGE) += bootstage.o
+
 ifdef CONFIG_SPL_BUILD
 obj-$(CONFIG_SPL_DFU_SUPPORT) += dfu.o
 obj-$(CONFIG_SPL_DFU_SUPPORT) += cli_hush.o
diff --git a/common/board_f.c b/common/board_f.c
index a8fc28c..46e5284 100644
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -707,11 +707,26 @@ static int jump_to_copy(void)
 /* Record the board_init_f() bootstage (after arch_cpu_init()) */
 static int initf_bootstage(void)
 {
+#if defined(CONFIG_SPL_BOOTSTAGE) && defined(CONFIG_BOOTSTAGE_STASH)
+	bool from_spl = true;
+#else
+	bool from_spl = false;
+#endif
 	int ret;
 
-	ret = bootstage_init(true);
+	ret = bootstage_init(!from_spl);
 	if (ret)
 		return ret;
+	if (from_spl) {
+		const void *stash = map_sysmem(CONFIG_BOOTSTAGE_STASH_ADDR,
+					       CONFIG_BOOTSTAGE_STASH_SIZE);
+
+		ret = bootstage_unstash(stash, CONFIG_BOOTSTAGE_STASH_SIZE);
+		if (ret && ret != -ENOENT) {
+			debug("Failed to unstash bootstage: err=%d\n", ret);
+			return ret;
+		}
+	}
 
 	bootstage_mark_name(BOOTSTAGE_ID_START_UBOOT_F, "board_init_f");
 
diff --git a/common/spl/spl.c b/common/spl/spl.c
index 0a49766..f493a3a 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -232,6 +232,13 @@ static int spl_common_init(bool setup_malloc)
 		gd->malloc_ptr = 0;
 	}
 #endif
+	ret = bootstage_init(true);
+	if (ret) {
+		debug("%s: Failed to set up bootstage: ret=%d\n", __func__,
+		      ret);
+		return ret;
+	}
+	bootstage_mark_name(BOOTSTAGE_ID_START_SPL, "spl");
 	if (CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)) {
 		ret = fdtdec_setup();
 		if (ret) {
@@ -240,8 +247,10 @@ static int spl_common_init(bool setup_malloc)
 		}
 	}
 	if (IS_ENABLED(CONFIG_SPL_DM)) {
+		bootstage_start(BOOTSTATE_ID_ACCUM_DM_SPL, "dm_spl");
 		/* With CONFIG_SPL_OF_PLATDATA, bring in all devices */
 		ret = dm_init_and_scan(!CONFIG_IS_ENABLED(OF_PLATDATA));
+		bootstage_accum(BOOTSTATE_ID_ACCUM_DM_SPL);
 		if (ret) {
 			debug("dm_init_and_scan() returned error %d\n", ret);
 			return ret;
@@ -421,6 +430,15 @@ void board_init_r(gd_t *dummy1, ulong dummy2)
 	}
 
 	debug("loaded - jumping to U-Boot...\n");
+#ifdef CONFIG_BOOTSTAGE_STASH
+	int ret;
+
+	bootstage_mark_name(BOOTSTAGE_ID_END_SPL, "end_spl");
+	ret = bootstage_stash((void *)CONFIG_BOOTSTAGE_STASH_ADDR,
+			      CONFIG_BOOTSTAGE_STASH_SIZE);
+	if (ret)
+		debug("Failed to stash bootstage: err=%d\n", ret);
+#endif
 	spl_board_prepare_for_boot();
 	jump_to_image_no_args(&spl_image);
 }