Separate omap24xx specific code from arm1136

Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136 to cpu/arm1136/omap24xx.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>

1 files changed, 0 insertions, 167 deletions

diff --git a/cpu/arm1136/interrupts.c b/cpu/arm1136/interrupts.c
deleted file mode 100644
index 491c902..0000000
--- a/cpu/arm1136/interrupts.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- * Alex Zuepke <azu@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/bits.h>
-
-#if !defined(CONFIG_INTEGRATOR) && ! defined(CONFIG_ARCH_CINTEGRATOR)
-# include <asm/arch/omap2420.h>
-#endif
-
-#define TIMER_LOAD_VAL 0
-
-/* macro to read the 32 bit timer */
-#define READ_TIMER (*(volatile ulong *)(CFG_TIMERBASE+TCRR))
-
-#if defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_CINTEGRATOR)
-/* Use the IntegratorCP function from board/integratorcp.c */
-#else
-
-static ulong timestamp;
-static ulong lastinc;
-
-/* nothing really to do with interrupts, just starts up a counter. */
-int interrupt_init (void)
-{
-	int32_t val;
-
-	/* Start the counter ticking up */
-	*((int32_t *) (CFG_TIMERBASE + TLDR)) = TIMER_LOAD_VAL;	/* reload value on overflow*/
-	val = (CFG_PVT << 2) | BIT5 | BIT1 | BIT0;		/* mask to enable timer*/
-	*((int32_t *) (CFG_TIMERBASE + TCLR)) = val;	/* start timer */
-
-	reset_timer_masked(); /* init the timestamp and lastinc value */
-
-	return(0);
-}
-/*
- * timer without interrupts
- */
-void reset_timer (void)
-{
-	reset_timer_masked ();
-}
-
-ulong get_timer (ulong base)
-{
-	return get_timer_masked () - base;
-}
-
-void set_timer (ulong t)
-{
-	timestamp = t;
-}
-
-/* delay x useconds AND perserve advance timstamp value */
-void udelay (unsigned long usec)
-{
-	ulong tmo, tmp;
-
-	if (usec >= 1000) {			/* if "big" number, spread normalization to seconds */
-		tmo = usec / 1000;		/* start to normalize for usec to ticks per sec */
-		tmo *= CFG_HZ;			/* find number of "ticks" to wait to achieve target */
-		tmo /= 1000;			/* finish normalize. */
-	} else {					/* else small number, don't kill it prior to HZ multiply */
-		tmo = usec * CFG_HZ;
-		tmo /= (1000*1000);
-	}
-
-	tmp = get_timer (0);		/* get current timestamp */
-	if ( (tmo + tmp + 1) < tmp )/* if setting this forward will roll time stamp */
-		reset_timer_masked ();	/* reset "advancing" timestamp to 0, set lastinc value */
-	else
-		tmo	+= tmp;				/* else, set advancing stamp wake up time */
-	while (get_timer_masked () < tmo)/* loop till event */
-		/*NOP*/;
-}
-
-void reset_timer_masked (void)
-{
-	/* reset time */
-	lastinc = READ_TIMER;		/* capture current incrementer value time */
-	timestamp = 0;				/* start "advancing" time stamp from 0 */
-}
-
-ulong get_timer_masked (void)
-{
-	ulong now = READ_TIMER;		/* current tick value */
-
-	if (now >= lastinc)			/* normal mode (non roll) */
-		timestamp += (now - lastinc); /* move stamp fordward with absoulte diff ticks */
-	else						/* we have rollover of incrementer */
-		timestamp += (0xFFFFFFFF - lastinc) + now;
-	lastinc = now;
-	return timestamp;
-}
-
-/* waits specified delay value and resets timestamp */
-void udelay_masked (unsigned long usec)
-{
-	ulong tmo;
-	ulong endtime;
-	signed long diff;
-
-	if (usec >= 1000) {			/* if "big" number, spread normalization to seconds */
-		tmo = usec / 1000;		/* start to normalize for usec to ticks per sec */
-		tmo *= CFG_HZ;			/* find number of "ticks" to wait to achieve target */
-		tmo /= 1000;			/* finish normalize. */
-	} else {					/* else small number, don't kill it prior to HZ multiply */
-		tmo = usec * CFG_HZ;
-		tmo /= (1000*1000);
-	}
-	endtime = get_timer_masked () + tmo;
-
-	do {
-		ulong now = get_timer_masked ();
-		diff = endtime - now;
-	} while (diff >= 0);
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
-	return get_timer(0);
-}
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-ulong get_tbclk (void)
-{
-	ulong tbclk;
-	tbclk = CFG_HZ;
-	return tbclk;
-}
-#endif /* !Integrator/CP */