diff options
author | Haavard Skinnemoen <hskinnemoen@atmel.com> | 2006-11-19 17:06:53 (GMT) |
---|---|---|
committer | Haavard Skinnemoen <hskinnemoen@atmel.com> | 2007-04-14 13:20:27 (GMT) |
commit | df548d3c3e2bbc40258713167859ffc2ce99a900 (patch) | |
tree | 63759a73724848ba192874aa552861e03faf1058 /cpu/at32ap/hsdramc.c | |
parent | 03d1e1365796cd15d1726e8a51fd8b5be50b2fe9 (diff) | |
download | u-boot-df548d3c3e2bbc40258713167859ffc2ce99a900.tar.xz |
AVR32: Resource management rewrite
Rewrite the resource management code (i.e. I/O memory, clock gating,
gpio) so it doesn't depend on any global state. This is necessary
because this code is heavily used before relocation to RAM, so we
can't write to any global variables.
As an added bonus, this makes u-boot's memory footprint a bit smaller,
although some functionality has been left out; all clocks are enabled
all the time, and there's no checking for gpio line conflicts.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Diffstat (limited to 'cpu/at32ap/hsdramc.c')
-rw-r--r-- | cpu/at32ap/hsdramc.c | 43 |
1 files changed, 14 insertions, 29 deletions
diff --git a/cpu/at32ap/hsdramc.c b/cpu/at32ap/hsdramc.c index f36da35..a936e03 100644 --- a/cpu/at32ap/hsdramc.c +++ b/cpu/at32ap/hsdramc.c @@ -25,17 +25,11 @@ #include <asm/io.h> #include <asm/sdram.h> -#include <asm/arch/platform.h> +#include <asm/arch/clk.h> +#include <asm/arch/memory-map.h> #include "hsdramc1.h" -struct hsdramc { - const struct device *hebi; - void *regs; -}; - -static struct hsdramc hsdramc; - unsigned long sdram_init(const struct sdram_info *info) { unsigned long *sdram = (unsigned long *)uncached(info->phys_addr); @@ -44,16 +38,6 @@ unsigned long sdram_init(const struct sdram_info *info) unsigned long bus_hz; unsigned int i; - hsdramc.hebi = get_device(DEVICE_HEBI); - if (!hsdramc.hebi) - return 0; - - /* FIXME: Both of these lines are complete hacks */ - hsdramc.regs = hsdramc.hebi->regs + 0x400; - bus_hz = pm_get_clock_freq(hsdramc.hebi->resource[0].u.clock.id); - - cpu_enable_sdram(); - tmp = (HSDRAMC1_BF(NC, info->col_bits - 8) | HSDRAMC1_BF(NR, info->row_bits - 11) | HSDRAMC1_BF(NB, info->bank_bits - 1) @@ -74,7 +58,7 @@ unsigned long sdram_init(const struct sdram_info *info) + info->bank_bits + 2); #endif - hsdramc1_writel(&hsdramc, CR, tmp); + hsdramc1_writel(CR, tmp); /* * Initialization sequence for SDRAM, from the data sheet: @@ -87,15 +71,15 @@ unsigned long sdram_init(const struct sdram_info *info) /* * 2. A Precharge All command is issued to the SDRAM */ - hsdramc1_writel(&hsdramc, MR, HSDRAMC1_MODE_BANKS_PRECHARGE); - hsdramc1_readl(&hsdramc, MR); + hsdramc1_writel(MR, HSDRAMC1_MODE_BANKS_PRECHARGE); + hsdramc1_readl(MR); writel(0, sdram); /* * 3. Eight auto-refresh (CBR) cycles are provided */ - hsdramc1_writel(&hsdramc, MR, HSDRAMC1_MODE_AUTO_REFRESH); - hsdramc1_readl(&hsdramc, MR); + hsdramc1_writel(MR, HSDRAMC1_MODE_AUTO_REFRESH); + hsdramc1_readl(MR); for (i = 0; i < 8; i++) writel(0, sdram); @@ -106,8 +90,8 @@ unsigned long sdram_init(const struct sdram_info *info) * * CAS from info struct, burst length 1, serial burst type */ - hsdramc1_writel(&hsdramc, MR, HSDRAMC1_MODE_LOAD_MODE); - hsdramc1_readl(&hsdramc, MR); + hsdramc1_writel(MR, HSDRAMC1_MODE_LOAD_MODE); + hsdramc1_readl(MR); writel(0, sdram + (info->cas << 4)); /* @@ -117,9 +101,9 @@ unsigned long sdram_init(const struct sdram_info *info) * From the timing diagram, it looks like tMRD is 3 * cycles...try a dummy read from the peripheral bus. */ - hsdramc1_readl(&hsdramc, MR); - hsdramc1_writel(&hsdramc, MR, HSDRAMC1_MODE_NORMAL); - hsdramc1_readl(&hsdramc, MR); + hsdramc1_readl(MR); + hsdramc1_writel(MR, HSDRAMC1_MODE_NORMAL); + hsdramc1_readl(MR); writel(0, sdram); /* @@ -128,7 +112,8 @@ unsigned long sdram_init(const struct sdram_info *info) * * 15.6 us is a typical value for a burst of length one */ - hsdramc1_writel(&hsdramc, TR, (156 * (bus_hz / 1000)) / 10000); + bus_hz = get_sdram_clk_rate(); + hsdramc1_writel(TR, (156 * (bus_hz / 1000)) / 10000); printf("SDRAM: %u MB at address 0x%08lx\n", sdram_size >> 20, info->phys_addr); |