diff options
author | wdenk <wdenk> | 2003-05-31 18:35:21 (GMT) |
---|---|---|
committer | wdenk <wdenk> | 2003-05-31 18:35:21 (GMT) |
commit | 7a8e9bed17d7924a9c5c4699b1f6a3a0359524ed (patch) | |
tree | 5c273df9c5efa7b1b6a4ca88904e48039ef591e8 /cpu/i386/serial.c | |
parent | 3b57fe0a70b903f4db66c558bb9828bc58acf06b (diff) | |
download | u-boot-7a8e9bed17d7924a9c5c4699b1f6a3a0359524ed.tar.xz |
* Patch by Marc Singer, 29 May 2003:
Fixed rarp boot method for IA32 and other little-endian CPUs.
* Patch by Marc Singer, 28 May 2003:
Added port I/O commands.
* Patch by Matthew McClintock, 28 May 2003
- cpu/mpc824x/start.S: fix relocation code when booting from RAM
- minor patches for utx8245
* Patch by Daniel Engström, 28 May 2003:
x86 update
* Patch by Dave Ellis, 9 May 2003 + 27 May 2003:
add nand flash support to SXNI855T configuration
fix/extend nand flash support:
- fix 'nand erase' command so does not erase bad blocks
- fix 'nand write' command so does not write to bad blocks
- fix nand_probe() so handles no flash detected properly
- add doc/README.nand
- add .jffs2 and .oob options to nand read/write
- add 'nand bad' command to list bad blocks
- add 'clean' option to 'nand erase' to write JFFS2 clean markers
- make NAND read/write faster
* Patch by Rune Torgersen, 23 May 2003:
Update for MPC8266ADS board
Diffstat (limited to 'cpu/i386/serial.c')
-rw-r--r-- | cpu/i386/serial.c | 153 |
1 files changed, 102 insertions, 51 deletions
diff --git a/cpu/i386/serial.c b/cpu/i386/serial.c index c0d2e8a..22c3c2a 100644 --- a/cpu/i386/serial.c +++ b/cpu/i386/serial.c @@ -24,6 +24,7 @@ * MA 02111-1307 USA */ /*------------------------------------------------------------------------------+ */ + /* * This source code has been made available to you by IBM on an AS-IS * basis. Anyone receiving this source is licensed under IBM @@ -89,13 +90,15 @@ typedef struct { char *rx_buffer; ulong rx_put; ulong rx_get; + int cts; } serial_buffer_t; -volatile static serial_buffer_t buf_info; +volatile serial_buffer_t buf_info; +static int serial_buffer_active=0; #endif -static int serial_div (int baudrate ) +static int serial_div(int baudrate) { switch (baudrate) { @@ -112,7 +115,8 @@ static int serial_div (int baudrate ) case 115200: return 1; } - hang (); + + return 12; } @@ -121,7 +125,7 @@ static int serial_div (int baudrate ) * as serial console interface. */ -int serial_init (void) +int serial_init(void) { DECLARE_GLOBAL_DATA_PTR; @@ -134,24 +138,24 @@ int serial_init (void) outb(bdiv, UART0_BASE + UART_DLL); /* set baudrate divisor */ outb(bdiv >> 8, UART0_BASE + UART_DLM);/* set baudrate divisor */ outb(0x03, UART0_BASE + UART_LCR); /* clear DLAB; set 8 bits, no parity */ - outb(0x00, UART0_BASE + UART_FCR); /* disable FIFO */ - outb(0x00, UART0_BASE + UART_MCR); /* no modem control DTR RTS */ + outb(0x01, UART0_BASE + UART_FCR); /* enable FIFO */ + outb(0x0b, UART0_BASE + UART_MCR); /* Set DTR and RTS active */ val = inb(UART0_BASE + UART_LSR); /* clear line status */ val = inb(UART0_BASE + UART_RBR); /* read receive buffer */ outb(0x00, UART0_BASE + UART_SCR); /* set scratchpad */ outb(0x00, UART0_BASE + UART_IER); /* set interrupt enable reg */ - return (0); + return 0; } -void serial_setbrg (void) +void serial_setbrg(void) { DECLARE_GLOBAL_DATA_PTR; unsigned short bdiv; - bdiv = serial_div (gd->baudrate); + bdiv = serial_div(gd->baudrate); outb(0x80, UART0_BASE + UART_LCR); /* set DLAB bit */ outb(bdiv&0xff, UART0_BASE + UART_DLL); /* set baudrate divisor */ @@ -160,7 +164,7 @@ void serial_setbrg (void) } -void serial_putc (const char c) +void serial_putc(const char c) { int i; @@ -169,31 +173,38 @@ void serial_putc (const char c) /* check THRE bit, wait for transmiter available */ for (i = 1; i < 3500; i++) { - if ((inb (UART0_BASE + UART_LSR) & 0x20) == 0x20) + if ((inb (UART0_BASE + UART_LSR) & 0x20) == 0x20) { break; - udelay (100); + } + udelay(100); } outb(c, UART0_BASE + UART_THR); /* put character out */ } -void serial_puts (const char *s) +void serial_puts(const char *s) { while (*s) { - serial_putc (*s++); + serial_putc(*s++); } } -int serial_getc () +int serial_getc(void) { unsigned char status = 0; +#if CONFIG_SERIAL_SOFTWARE_FIFO + if (serial_buffer_active) { + return serial_buffered_getc(); + } +#endif + while (1) { #if defined(CONFIG_HW_WATCHDOG) - WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */ + WATCHDOG_RESET(); /* Reset HW Watchdog, if needed */ #endif /* CONFIG_HW_WATCHDOG */ - status = inb (UART0_BASE + UART_LSR); + status = inb(UART0_BASE + UART_LSR); if ((status & asyncLSRDataReady1) != 0x0) { break; } @@ -211,11 +222,17 @@ int serial_getc () } -int serial_tstc () +int serial_tstc(void) { unsigned char status; - status = inb (UART0_BASE + UART_LSR); +#if CONFIG_SERIAL_SOFTWARE_FIFO + if (serial_buffer_active) { + return serial_buffered_tstc(); + } +#endif + + status = inb(UART0_BASE + UART_LSR); if ((status & asyncLSRDataReady1) != 0x0) { return (1); } @@ -234,36 +251,50 @@ int serial_tstc () #if CONFIG_SERIAL_SOFTWARE_FIFO -void serial_isr (void *arg) +void serial_isr(void *arg) { int space; int c; - const int rx_get = buf_info.rx_get; int rx_put = buf_info.rx_put; - if (rx_get <= rx_put) { - space = CONFIG_SERIAL_SOFTWARE_FIFO - (rx_put - rx_get); + if (buf_info.rx_get <= rx_put) { + space = CONFIG_SERIAL_SOFTWARE_FIFO - (rx_put - buf_info.rx_get); } else { - space = rx_get - rx_put; + space = buf_info.rx_get - rx_put; } - while (serial_tstc ()) { - c = serial_getc (); + + while (inb(UART0_BASE + UART_LSR) & 1) { + c = inb(UART0_BASE); if (space) { buf_info.rx_buffer[rx_put++] = c; space--; + + if (rx_put == buf_info.rx_get) { + buf_info.rx_get++; + if (rx_put == CONFIG_SERIAL_SOFTWARE_FIFO) { + buf_info.rx_get = 0; + } + } + + if (rx_put == CONFIG_SERIAL_SOFTWARE_FIFO) { + rx_put = 0; + if (0 == buf_info.rx_get) { + buf_info.rx_get = 1; + } + + } + } - if (rx_put == CONFIG_SERIAL_SOFTWARE_FIFO) - rx_put = 0; if (space < CONFIG_SERIAL_SOFTWARE_FIFO / 4) { /* Stop flow by setting RTS inactive */ - outb(inb (UART0_BASE + UART_MCR) & (0xFF ^ 0x02), + outb(inb(UART0_BASE + UART_MCR) & (0xFF ^ 0x02), UART0_BASE + UART_MCR); } } buf_info.rx_put = rx_put; } -void serial_buffered_init (void) +void serial_buffered_init(void) { serial_puts ("Switching to interrupt driven serial input mode.\n"); buf_info.rx_buffer = malloc (CONFIG_SERIAL_SOFTWARE_FIFO); @@ -272,8 +303,10 @@ void serial_buffered_init (void) if (inb (UART0_BASE + UART_MSR) & 0x10) { serial_puts ("Check CTS signal present on serial port: OK.\n"); + buf_info.cts = 1; } else { serial_puts ("WARNING: CTS signal not present on serial port.\n"); + buf_info.cts = 0; } irq_install_handler ( VECNUM_U0 /*UART0 *//*int vec */ , @@ -283,32 +316,49 @@ void serial_buffered_init (void) /* Enable "RX Data Available" Interrupt on UART */ /* outb(inb(UART0_BASE + UART_IER) |0x01, UART0_BASE + UART_IER); */ outb(0x01, UART0_BASE + UART_IER); - /* Set DTR active */ - outb(inb (UART0_BASE + UART_MCR) | 0x01, UART0_BASE + UART_MCR); - /* Start flow by setting RTS active */ - outb(inb (UART0_BASE + UART_MCR) | 0x02, UART0_BASE + UART_MCR); - /* Setup UART FIFO: RX trigger level: 4 byte, Enable FIFO */ - outb((1 << 6) | 1, UART0_BASE + UART_FCR); + + /* Set DTR and RTS active, enable interrupts */ + outb(inb (UART0_BASE + UART_MCR) | 0x0b, UART0_BASE + UART_MCR); + + /* Setup UART FIFO: RX trigger level: 1 byte, Enable FIFO */ + outb( /*(1 << 6) |*/ 1, UART0_BASE + UART_FCR); + + serial_buffer_active = 1; } void serial_buffered_putc (const char c) { + int i; /* Wait for CTS */ #if defined(CONFIG_HW_WATCHDOG) while (!(inb (UART0_BASE + UART_MSR) & 0x10)) WATCHDOG_RESET (); #else - while (!(inb (UART0_BASE + UART_MSR) & 0x10)); + if (buf_info.cts) { + for (i=0;i<1000;i++) { + if ((inb (UART0_BASE + UART_MSR) & 0x10)) { + break; + } + } + if (i!=1000) { + buf_info.cts = 0; + } + } else { + if ((inb (UART0_BASE + UART_MSR) & 0x10)) { + buf_info.cts = 1; + } + } + #endif serial_putc (c); } -void serial_buffered_puts (const char *s) +void serial_buffered_puts(const char *s) { serial_puts (s); } -int serial_buffered_getc (void) +int serial_buffered_getc(void) { int space; int c; @@ -322,8 +372,9 @@ int serial_buffered_getc (void) while (rx_get == buf_info.rx_put); #endif c = buf_info.rx_buffer[rx_get++]; - if (rx_get == CONFIG_SERIAL_SOFTWARE_FIFO) + if (rx_get == CONFIG_SERIAL_SOFTWARE_FIFO) { rx_get = 0; + } buf_info.rx_get = rx_get; rx_put = buf_info.rx_put; @@ -340,7 +391,7 @@ int serial_buffered_getc (void) return c; } -int serial_buffered_tstc (void) +int serial_buffered_tstc(void) { return (buf_info.rx_get != buf_info.rx_put) ? 1 : 0; } @@ -358,7 +409,7 @@ int serial_buffered_tstc (void) configure port 1 for serial I/O with rate = CONFIG_KGDB_BAUDRATE */ #if (CONFIG_KGDB_SER_INDEX & 2) -void kgdb_serial_init (void) +void kgdb_serial_init(void) { DECLARE_GLOBAL_DATA_PTR; @@ -381,7 +432,7 @@ void kgdb_serial_init (void) } -void putDebugChar (const char c) +void putDebugChar(const char c) { if (c == '\n') serial_putc ('\r'); @@ -393,7 +444,7 @@ void putDebugChar (const char c) } -void putDebugStr (const char *s) +void putDebugStr(const char *s) { while (*s) { serial_putc(*s++); @@ -401,7 +452,7 @@ void putDebugStr (const char *s) } -int getDebugChar (void) +int getDebugChar(void) { unsigned char status = 0; @@ -424,34 +475,34 @@ int getDebugChar (void) } -void kgdb_interruptible (int yes) +void kgdb_interruptible(int yes) { return; } #else /* ! (CONFIG_KGDB_SER_INDEX & 2) */ -void kgdb_serial_init (void) +void kgdb_serial_init(void) { serial_printf ("[on serial] "); } -void putDebugChar (int c) +void putDebugChar(int c) { serial_putc (c); } -void putDebugStr (const char *str) +void putDebugStr(const char *str) { serial_puts (str); } -int getDebugChar (void) +int getDebugChar(void) { return serial_getc (); } -void kgdb_interruptible (int yes) +void kgdb_interruptible(int yes) { return; } |