diff options
author | wdenk <wdenk> | 2003-12-07 18:32:37 (GMT) |
---|---|---|
committer | wdenk <wdenk> | 2003-12-07 18:32:37 (GMT) |
commit | a2663ea4fc9d18cb8000c97ed92c3c668eda8e04 (patch) | |
tree | 9eb328b497d6f482e5571635fa00b1d0cae5b185 /cpu/mips | |
parent | ef5a9672c778e22ecb522db625b5df78ea40ed23 (diff) | |
download | u-boot-a2663ea4fc9d18cb8000c97ed92c3c668eda8e04.tar.xz |
* Patches by David Müller, 14 Nov 2003:
- board/mpl/common/common_util.c
* implement support for BZIP2 compressed images
* various cleanups (printf -> puts, ...)
- board/mpl/common/flash.c
* report correct errors to upper layers
* check the erase fail and VPP low bits in status reg
- board/mpl/vcma9/cmd_vcma9.c
- board/mpl/vcma9/flash.c
* various cleanups (printf -> puts, ...)
- common/cmd_usb.c
* fix typo in comment
- cpu/arm920t/usb_ohci.c
* support for S3C2410 is missing in #if line
- drivers/cs8900.c
* reinit some registers in case of error (cable missing, ...)
- fs/fat/fat.c
* support for USB/MMC devices is missing in #if line
- include/configs/MIP405.h
- include/configs/PIP405.h
* enable BZIP2 support
* enlarge malloc space to 1MiB because of BZIP2 support
- include/configs/VCMA9.h
* enable BZIP2 support
* enlarge malloc space to 1MiB because of BZIP2 support
* enable USB support
- lib_arm/armlinux.c
* change calling convention of ARM Linux kernel as
described on http://www.arm.linux.org.uk/developer/booting.php
* Patch by Thomas Lange, 14 Nov 2003:
Split dbau1x00 into dbau1000, dbau1100 and dbau1500 configs to
support all these AMD boards.
* Patch by Thomas Lange, 14 Nov 2003:
Workaround for mips au1x00 physical memory accesses (the au1x00
uses a 36 bit bus internally and cannot access physical memory
directly. Use the uncached SDRAM address instead of the physical
one.)
Diffstat (limited to 'cpu/mips')
-rw-r--r-- | cpu/mips/au1x00_eth.c | 15 |
1 files changed, 14 insertions, 1 deletions
diff --git a/cpu/mips/au1x00_eth.c b/cpu/mips/au1x00_eth.c index c23712b..ae51b75 100644 --- a/cpu/mips/au1x00_eth.c +++ b/cpu/mips/au1x00_eth.c @@ -31,12 +31,24 @@ /* We all use switches, right? ;-) */ #endif +/* I assume ethernet behaves like au1000 */ + #ifdef CONFIG_AU1000 /* Base address differ between cpu:s */ #define ETH0_BASE AU1000_ETH0_BASE #define MAC0_ENABLE AU1000_MAC0_ENABLE #else -#error "Au1100 and Au1500 not supported" +#ifdef CONFIG_AU1100 +#define ETH0_BASE AU1100_ETH0_BASE +#define MAC0_ENABLE AU1100_MAC0_ENABLE +#else +#ifdef CONFIG_AU1500 +#define ETH0_BASE AU1500_ETH0_BASE +#define MAC0_ENABLE AU1500_MAC0_ENABLE +#else +#error "No valid cpu set" +#endif +#endif #endif #include <common.h> @@ -175,6 +187,7 @@ static int au1x00_init(struct eth_device* dev, bd_t * bd){ } /* Put mac addr in little endian */ + /* FIXME Check this for little endian mode */ #define ea eth_get_dev()->enetaddr *mac_addr_high = (ea[5] << 8) | (ea[4] ) ; *mac_addr_low = (ea[3] << 24) | (ea[2] << 16) | |