diff options
author | Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | 2008-10-16 13:01:15 (GMT) |
---|---|---|
committer | Wolfgang Denk <wd@denx.de> | 2008-10-18 19:54:03 (GMT) |
commit | 6d0f6bcf337c5261c08fabe12982178c2c489d76 (patch) | |
tree | ae13958ffa9c6b58c2ea97aac07a4ad2f04a350f /cpu/mpc8220 | |
parent | 71edc271816ec82cf0550dd6980be2da3cc2ad9e (diff) | |
download | u-boot-6d0f6bcf337c5261c08fabe12982178c2c489d76.tar.xz |
rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Diffstat (limited to 'cpu/mpc8220')
-rw-r--r-- | cpu/mpc8220/cpu.c | 2 | ||||
-rw-r--r-- | cpu/mpc8220/cpu_init.c | 64 | ||||
-rw-r--r-- | cpu/mpc8220/dramSetup.c | 14 | ||||
-rw-r--r-- | cpu/mpc8220/interrupts.c | 2 | ||||
-rw-r--r-- | cpu/mpc8220/pci.c | 4 | ||||
-rw-r--r-- | cpu/mpc8220/speed.c | 14 | ||||
-rw-r--r-- | cpu/mpc8220/start.S | 34 |
7 files changed, 67 insertions, 67 deletions
diff --git a/cpu/mpc8220/cpu.c b/cpu/mpc8220/cpu.c index be274cd..5b3fdd3 100644 --- a/cpu/mpc8220/cpu.c +++ b/cpu/mpc8220/cpu.c @@ -42,7 +42,7 @@ int checkcpu (void) printf (CPU_ID_STR); - printf (" (JTAG ID %08lx)", *(vu_long *) (CFG_MBAR + 0x50)); + printf (" (JTAG ID %08lx)", *(vu_long *) (CONFIG_SYS_MBAR + 0x50)); printf (" at %s MHz\n", strmhz (buf, clock)); diff --git a/cpu/mpc8220/cpu_init.c b/cpu/mpc8220/cpu_init.c index 0daac5b..8f52c7d 100644 --- a/cpu/mpc8220/cpu_init.c +++ b/cpu/mpc8220/cpu_init.c @@ -39,7 +39,7 @@ void cpu_init_f (void) volatile xlbarb8220_t *xlbarb = (volatile xlbarb8220_t *) MMAP_XLBARB; /* Pointer is writable since we allocated a register for it */ - gd = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET); + gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); /* Clear initial global data */ memset ((void *) gd, 0, sizeof (gd_t)); @@ -49,54 +49,54 @@ void cpu_init_f (void) portcfg->pcfg1 = 0; portcfg->pcfg2 = 0; portcfg->pcfg3 = 0; - portcfg->pcfg2 = CFG_GP1_PORT2_CONFIG; - portcfg->pcfg3 = CFG_PCI_PORT3_CONFIG | CFG_GP2_PORT3_CONFIG; + portcfg->pcfg2 = CONFIG_SYS_GP1_PORT2_CONFIG; + portcfg->pcfg3 = CONFIG_SYS_PCI_PORT3_CONFIG | CONFIG_SYS_GP2_PORT3_CONFIG; /* * Flexbus Controller: configure chip selects and enable them */ -#if defined (CFG_CS0_BASE) - flexbus->csar0 = CFG_CS0_BASE; +#if defined (CONFIG_SYS_CS0_BASE) + flexbus->csar0 = CONFIG_SYS_CS0_BASE; /* Sorcery-C can hang-up after CTRL reg initialization */ -#if defined (CFG_CS0_CTRL) - flexbus->cscr0 = CFG_CS0_CTRL; +#if defined (CONFIG_SYS_CS0_CTRL) + flexbus->cscr0 = CONFIG_SYS_CS0_CTRL; #endif - flexbus->csmr0 = ((CFG_CS0_MASK - 1) & 0xffff0000) | 1; + flexbus->csmr0 = ((CONFIG_SYS_CS0_MASK - 1) & 0xffff0000) | 1; __asm__ volatile ("sync"); #endif -#if defined (CFG_CS1_BASE) - flexbus->csar1 = CFG_CS1_BASE; - flexbus->cscr1 = CFG_CS1_CTRL; - flexbus->csmr1 = ((CFG_CS1_MASK - 1) & 0xffff0000) | 1; +#if defined (CONFIG_SYS_CS1_BASE) + flexbus->csar1 = CONFIG_SYS_CS1_BASE; + flexbus->cscr1 = CONFIG_SYS_CS1_CTRL; + flexbus->csmr1 = ((CONFIG_SYS_CS1_MASK - 1) & 0xffff0000) | 1; __asm__ volatile ("sync"); #endif -#if defined (CFG_CS2_BASE) - flexbus->csar2 = CFG_CS2_BASE; - flexbus->cscr2 = CFG_CS2_CTRL; - flexbus->csmr2 = ((CFG_CS2_MASK - 1) & 0xffff0000) | 1; - portcfg->pcfg3 |= CFG_CS2_PORT3_CONFIG; +#if defined (CONFIG_SYS_CS2_BASE) + flexbus->csar2 = CONFIG_SYS_CS2_BASE; + flexbus->cscr2 = CONFIG_SYS_CS2_CTRL; + flexbus->csmr2 = ((CONFIG_SYS_CS2_MASK - 1) & 0xffff0000) | 1; + portcfg->pcfg3 |= CONFIG_SYS_CS2_PORT3_CONFIG; __asm__ volatile ("sync"); #endif -#if defined (CFG_CS3_BASE) - flexbus->csar3 = CFG_CS3_BASE; - flexbus->cscr3 = CFG_CS3_CTRL; - flexbus->csmr3 = ((CFG_CS3_MASK - 1) & 0xffff0000) | 1; - portcfg->pcfg3 |= CFG_CS3_PORT3_CONFIG; +#if defined (CONFIG_SYS_CS3_BASE) + flexbus->csar3 = CONFIG_SYS_CS3_BASE; + flexbus->cscr3 = CONFIG_SYS_CS3_CTRL; + flexbus->csmr3 = ((CONFIG_SYS_CS3_MASK - 1) & 0xffff0000) | 1; + portcfg->pcfg3 |= CONFIG_SYS_CS3_PORT3_CONFIG; __asm__ volatile ("sync"); #endif -#if defined (CFG_CS4_BASE) - flexbus->csar4 = CFG_CS4_BASE; - flexbus->cscr4 = CFG_CS4_CTRL; - flexbus->csmr4 = ((CFG_CS4_MASK - 1) & 0xffff0000) | 1; - portcfg->pcfg3 |= CFG_CS4_PORT3_CONFIG; +#if defined (CONFIG_SYS_CS4_BASE) + flexbus->csar4 = CONFIG_SYS_CS4_BASE; + flexbus->cscr4 = CONFIG_SYS_CS4_CTRL; + flexbus->csmr4 = ((CONFIG_SYS_CS4_MASK - 1) & 0xffff0000) | 1; + portcfg->pcfg3 |= CONFIG_SYS_CS4_PORT3_CONFIG; __asm__ volatile ("sync"); #endif -#if defined (CFG_CS5_BASE) - flexbus->csar5 = CFG_CS5_BASE; - flexbus->cscr5 = CFG_CS5_CTRL; - flexbus->csmr5 = ((CFG_CS5_MASK - 1) & 0xffff0000) | 1; - portcfg->pcfg3 |= CFG_CS5_PORT3_CONFIG; +#if defined (CONFIG_SYS_CS5_BASE) + flexbus->csar5 = CONFIG_SYS_CS5_BASE; + flexbus->cscr5 = CONFIG_SYS_CS5_CTRL; + flexbus->csmr5 = ((CONFIG_SYS_CS5_MASK - 1) & 0xffff0000) | 1; + portcfg->pcfg3 |= CONFIG_SYS_CS5_PORT3_CONFIG; __asm__ volatile ("sync"); #endif diff --git a/cpu/mpc8220/dramSetup.c b/cpu/mpc8220/dramSetup.c index 08e3172..52cf133 100644 --- a/cpu/mpc8220/dramSetup.c +++ b/cpu/mpc8220/dramSetup.c @@ -34,9 +34,9 @@ characteristics to initialize the dram on MPC8220 DECLARE_GLOBAL_DATA_PTR; -#define SPD_SIZE CFG_SDRAM_SPD_SIZE -#define DRAM_SPD (CFG_SDRAM_SPD_I2C_ADDR)<<1 /* on Board SPD eeprom */ -#define TOTAL_BANK CFG_SDRAM_TOTAL_BANKS +#define SPD_SIZE CONFIG_SYS_SDRAM_SPD_SIZE +#define DRAM_SPD (CONFIG_SYS_SDRAM_SPD_I2C_ADDR)<<1 /* on Board SPD eeprom */ +#define TOTAL_BANK CONFIG_SYS_SDRAM_TOTAL_BANKS int spd_status (volatile i2c8220_t * pi2c, u8 sta_bit, u8 truefalse) { @@ -103,7 +103,7 @@ int readSpdData (u8 * spdData) /* Enable Port Configuration for SDA and SDL signals */ pcfg = (volatile pcfg8220_t *) (MMAP_PCFG); __asm__ ("sync"); - pcfg->pcfg3 &= ~CFG_I2C_PORT3_CONFIG; + pcfg->pcfg3 &= ~CONFIG_SYS_I2C_PORT3_CONFIG; __asm__ ("sync"); /* Points the structure to I2c mbar memory offset */ @@ -144,7 +144,7 @@ int readSpdData (u8 * spdData) break; } - pi2cReg->adr = CFG_I2C_SLAVE<<1; + pi2cReg->adr = CONFIG_SYS_I2C_SLAVE<<1; pi2cReg->cr = I2C_CTL_EN; /* Set Enable */ @@ -541,7 +541,7 @@ u32 dramSetup (void) } /* Set up the Drive Strength register */ - sysconf->sdramds = CFG_SDRAM_DRIVE_STRENGTH; + sysconf->sdramds = CONFIG_SYS_SDRAM_DRIVE_STRENGTH; /* ********************** Cfg 1 ************************* */ @@ -679,7 +679,7 @@ u32 dramSetup (void) /* Set up mode value for CAS latency */ -#if (CFG_SDRAM_CAS_LATENCY==5) /* CL=2.5 */ +#if (CONFIG_SYS_SDRAM_CAS_LATENCY==5) /* CL=2.5 */ mode_value = (MODE_MODE | MODE_BURSTLEN (MODE_BURSTLEN_8) | MODE_BT_SEQUENTIAL | MODE_CL (MODE_CL_2p5) | MODE_CMD); #else diff --git a/cpu/mpc8220/interrupts.c b/cpu/mpc8220/interrupts.c index 036378c..78e9917 100644 --- a/cpu/mpc8220/interrupts.c +++ b/cpu/mpc8220/interrupts.c @@ -34,7 +34,7 @@ int interrupt_init_cpu (ulong * decrementer_count) { - *decrementer_count = get_tbclk () / CFG_HZ; + *decrementer_count = get_tbclk () / CONFIG_SYS_HZ; return (0); } diff --git a/cpu/mpc8220/pci.c b/cpu/mpc8220/pci.c index 4ef214e..a78a828 100644 --- a/cpu/mpc8220/pci.c +++ b/cpu/mpc8220/pci.c @@ -33,8 +33,8 @@ #if defined(CONFIG_PCI) /* System RAM mapped over PCI */ -#define CONFIG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE -#define CONFIG_PCI_SYS_MEM_PHYS CFG_SDRAM_BASE +#define CONFIG_PCI_SYS_MEM_BUS CONFIG_SYS_SDRAM_BASE +#define CONFIG_PCI_SYS_MEM_PHYS CONFIG_SYS_SDRAM_BASE #define CONFIG_PCI_SYS_MEM_SIZE (1024 * 1024 * 1024) #define cfg_read(val, addr, type, op) *val = op((type)(addr)); diff --git a/cpu/mpc8220/speed.c b/cpu/mpc8220/speed.c index 200a762..c01ca0c 100644 --- a/cpu/mpc8220/speed.c +++ b/cpu/mpc8220/speed.c @@ -67,25 +67,25 @@ int get_clocks (void) u32 hid1; int i, size, pci2bus; -#if !defined(CFG_MPC8220_CLKIN) -#error clock measuring not implemented yet - define CFG_MPC8220_CLKIN +#if !defined(CONFIG_SYS_MPC8220_CLKIN) +#error clock measuring not implemented yet - define CONFIG_SYS_MPC8220_CLKIN #endif - gd->inp_clk = CFG_MPC8220_CLKIN; + gd->inp_clk = CONFIG_SYS_MPC8220_CLKIN; /* Read XLB to PCI(INP) clock multiplier */ pci2bus = (*((volatile u32 *)PCI_REG_PCIGSCR) & PCI_REG_PCIGSCR_PCI2XLB_CLK_MASK)>>PCI_REG_PCIGSCR_PCI2XLB_CLK_BIT; /* XLB bus clock */ - gd->bus_clk = CFG_MPC8220_CLKIN * pci2bus; + gd->bus_clk = CONFIG_SYS_MPC8220_CLKIN * pci2bus; /* PCI clock is same as input clock */ - gd->pci_clk = CFG_MPC8220_CLKIN; + gd->pci_clk = CONFIG_SYS_MPC8220_CLKIN; /* FlexBus is temporary set as the same as input clock */ /* will do dynamic in the future */ - gd->flb_clk = CFG_MPC8220_CLKIN; + gd->flb_clk = CONFIG_SYS_MPC8220_CLKIN; /* CPU Clock - Read HID1 */ asm volatile ("mfspr %0, 1009":"=r" (hid1):); @@ -97,7 +97,7 @@ int get_clocks (void) for (i = 0; i < size; i++) if (hid1 == bus2core[i].hid1) { gd->cpu_clk = (bus2core[i].multi * gd->bus_clk) >> 1; - gd->vco_clk = CFG_MPC8220_SYSPLL_VCO_MULTIPLIER * (gd->pci_clk * bus2core[i].vco_div)/2; + gd->vco_clk = CONFIG_SYS_MPC8220_SYSPLL_VCO_MULTIPLIER * (gd->pci_clk * bus2core[i].vco_div)/2; break; } diff --git a/cpu/mpc8220/start.S b/cpu/mpc8220/start.S index b5145ca..373be2c 100644 --- a/cpu/mpc8220/start.S +++ b/cpu/mpc8220/start.S @@ -105,16 +105,16 @@ boot_warm: /* replace default MBAR base address from 0x80000000 to 0xf0000000 */ -#if defined(CFG_DEFAULT_MBAR) && !defined(CFG_RAMBOOT) - lis r3, CFG_MBAR@h - ori r3, r3, CFG_MBAR@l +#if defined(CONFIG_SYS_DEFAULT_MBAR) && !defined(CONFIG_SYS_RAMBOOT) + lis r3, CONFIG_SYS_MBAR@h + ori r3, r3, CONFIG_SYS_MBAR@l /* MBAR is mirrored into the MBAR SPR */ mtspr MBAR,r3 mtspr SPRN_SPRG7W,r3 - lis r4, CFG_DEFAULT_MBAR@h + lis r4, CONFIG_SYS_DEFAULT_MBAR@h stw r3, 0(r4) -#endif /* CFG_DEFAULT_MBAR */ +#endif /* CONFIG_SYS_DEFAULT_MBAR */ /* Initialise the MPC8220 processor core */ /*--------------------------------------------------------------*/ @@ -125,9 +125,9 @@ boot_warm: /*--------------------------------------------------------------*/ /* set up stack in on-chip SRAM */ - lis r3, CFG_INIT_RAM_ADDR@h - ori r3, r3, CFG_INIT_RAM_ADDR@l - ori r1, r3, CFG_INIT_SP_OFFSET + lis r3, CONFIG_SYS_INIT_RAM_ADDR@h + ori r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l + ori r1, r3, CONFIG_SYS_INIT_SP_OFFSET li r0, 0 /* Make room for stack frame header and */ stwu r0, -4(r1) /* clear final stack frame so that */ @@ -361,13 +361,13 @@ init_8220_core: /* HID0 also contains cache control */ /*--------------------------------------------------------------*/ - lis r3, CFG_HID0_INIT@h - ori r3, r3, CFG_HID0_INIT@l + lis r3, CONFIG_SYS_HID0_INIT@h + ori r3, r3, CONFIG_SYS_HID0_INIT@l SYNC mtspr HID0, r3 - lis r3, CFG_HID0_FINAL@h - ori r3, r3, CFG_HID0_FINAL@l + lis r3, CONFIG_SYS_HID0_FINAL@h + ori r3, r3, CONFIG_SYS_HID0_FINAL@l SYNC mtspr HID0, r3 @@ -458,7 +458,7 @@ init_8220_core: .globl icache_enable icache_enable: lis r4, 0 - ori r4, r4, CFG_HID0_INIT /* set ICE & ICFI bit */ + ori r4, r4, CONFIG_SYS_HID0_INIT /* set ICE & ICFI bit */ rlwinm r3, r4, 0, 21, 19 /* clear the ICFI bit */ /* @@ -547,16 +547,16 @@ relocate_code: mr r10, r5 /* Save copy of Destination Address */ mr r3, r5 /* Destination Address */ - lis r4, CFG_MONITOR_BASE@h /* Source Address */ - ori r4, r4, CFG_MONITOR_BASE@l + lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */ + ori r4, r4, CONFIG_SYS_MONITOR_BASE@l lwz r5, GOT(__init_end) sub r5, r5, r4 - li r6, CFG_CACHELINE_SIZE /* Cache Line Size */ + li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */ /* * Fix GOT pointer: * - * New GOT-PTR = (old GOT-PTR - CFG_MONITOR_BASE) + Destination Address + * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address * * Offset: */ |