diff options
author | Stefan Roese <sr@denx.de> | 2009-09-28 15:33:45 (GMT) |
---|---|---|
committer | Stefan Roese <sr@denx.de> | 2009-10-02 11:53:37 (GMT) |
commit | fb95169e39f2d03270bed552d27bbb02627a443e (patch) | |
tree | c94e691e322097c7cdc43943cd3bb05b3e7c760e /cpu/ppc4xx | |
parent | d24bd2517a2b847f773453eab0ee5b1c8ebc74ba (diff) | |
download | u-boot-fb95169e39f2d03270bed552d27bbb02627a443e.tar.xz |
ppc4xx: Merge PPC4xx DDR and DDR2 ECC handling
This patch merges the ECC handling (ECC parity byte writing) into one
file (ecc.c) for all PPC4xx SDRAM controllers except for PPC440EPx/GRx.
This exception is because only those PPC's use the completely different
Denali SDRAM controller core.
Previously we had two routines to generate/write the ECC parity bytes.
With this patch we now only have one core function left.
Tested on Kilauea (no ECC) and Katmai (with and without ECC).
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Felix Radensky <felix@embedded-sol.com>
Cc: Grant Erickson <gerickson@nuovations.com>
Cc: Pieter Voorthuijsen <pv@prodrive.nl>
Diffstat (limited to 'cpu/ppc4xx')
-rw-r--r-- | cpu/ppc4xx/44x_spd_ddr2.c | 194 | ||||
-rw-r--r-- | cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c | 6 | ||||
-rw-r--r-- | cpu/ppc4xx/ecc.c | 167 | ||||
-rw-r--r-- | cpu/ppc4xx/ecc.h | 52 |
4 files changed, 169 insertions, 250 deletions
diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c index 736e3cb..3975306 100644 --- a/cpu/ppc4xx/44x_spd_ddr2.c +++ b/cpu/ppc4xx/44x_spd_ddr2.c @@ -9,7 +9,7 @@ * Copyright (c) 2008 Nuovation System Designs, LLC * Grant Erickson <gerickson@nuovations.com> - * (C) Copyright 2007-2008 + * (C) Copyright 2007-2009 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * COPYRIGHT AMCC CORPORATION 2004 @@ -48,6 +48,8 @@ #include <asm/mmu.h> #include <asm/cache.h> +#include "ecc.h" + #if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR2) #define PPC4xx_IBM_DDR2_DUMP_REGISTER(mnemonic) \ @@ -93,24 +95,11 @@ void dcbz_area(u32 start_address, u32 num_bytes); #define MULDIV64(m1, m2, d) (u32)(((u64)(m1) * (u64)(m2)) / (u64)(d)) -static unsigned long is_ecc_enabled(void); - -/*-----------------------------------------------------------------------------+ - * wait_ddr_idle - *-----------------------------------------------------------------------------*/ -static void wait_ddr_idle(void) -{ - u32 val; - - do { - mfsdram(SDRAM_MCSTAT, val); - } while ((val & SDRAM_MCSTAT_IDLE_MASK) == SDRAM_MCSTAT_IDLE_NOT); -} - +#if !defined(CONFIG_NAND_SPL) /*-----------------------------------------------------------------------------+ * sdram_memsize *-----------------------------------------------------------------------------*/ -static phys_size_t sdram_memsize(void) +phys_size_t sdram_memsize(void) { phys_size_t mem_size; unsigned long mcopt2; @@ -184,6 +173,18 @@ static phys_size_t sdram_memsize(void) } /*-----------------------------------------------------------------------------+ + * is_ecc_enabled + *-----------------------------------------------------------------------------*/ +static unsigned long is_ecc_enabled(void) +{ + unsigned long val; + + mfsdram(SDRAM_MCOPT1, val); + + return SDRAM_MCOPT1_MCHK_CHK_DECODE(val); +} + +/*-----------------------------------------------------------------------------+ * board_add_ram_info *-----------------------------------------------------------------------------*/ void board_add_ram_info(int use_default) @@ -198,12 +199,11 @@ void board_add_ram_info(int use_default) get_sys_info(&board_cfg); -#if defined(CONFIG_440) +#if defined(CONFIG_405EX) + val = board_cfg.freqPLB; +#else mfsdr(SDR0_DDR0, val); val = MULDIV64((board_cfg.freqPLB), SDR0_DDR0_DDRM_DECODE(val), 1); -#else - mfsdr(SDR0_SDSTP0, val); - val = MULDIV64((board_cfg.freqPLB), SDR0_SDSTP0_PLB2xDV0_DECODE(val), 1); #endif printf(" enabled, %d MHz", (val * 2) / 1000000); @@ -211,112 +211,7 @@ void board_add_ram_info(int use_default) val = (val & SDRAM_MMODE_DCL_MASK) >> 4; printf(", CL%d)", val); } - -#ifdef CONFIG_DDR_ECC -/*-----------------------------------------------------------------------------+ - * program_ecc_addr. - *-----------------------------------------------------------------------------*/ -static void program_ecc_addr(unsigned long start_address, - unsigned long num_bytes, - unsigned long tlb_word2_i_value) -{ - unsigned long current_address; - unsigned long end_address; - unsigned long address_increment; - unsigned long mcopt1; - char str[] = "ECC generation -"; - char slash[] = "\\|/-\\|/-"; - int loop = 0; - int loopi = 0; - - current_address = start_address; - mfsdram(SDRAM_MCOPT1, mcopt1); - if ((mcopt1 & SDRAM_MCOPT1_MCHK_MASK) != SDRAM_MCOPT1_MCHK_NON) { - mtsdram(SDRAM_MCOPT1, - (mcopt1 & ~SDRAM_MCOPT1_MCHK_MASK) | SDRAM_MCOPT1_MCHK_GEN); - sync(); - eieio(); - wait_ddr_idle(); - - puts(str); - -#ifdef CONFIG_440 - if (tlb_word2_i_value == TLB_WORD2_I_ENABLE) { -#endif - /* ECC bit set method for non-cached memory */ - if ((mcopt1 & SDRAM_MCOPT1_DMWD_MASK) == SDRAM_MCOPT1_DMWD_32) - address_increment = 4; - else - address_increment = 8; - end_address = current_address + num_bytes; - - while (current_address < end_address) { - *((unsigned long *)current_address) = 0x00000000; - current_address += address_increment; - - if ((loop++ % (2 << 20)) == 0) { - putc('\b'); - putc(slash[loopi++ % 8]); - } - } -#ifdef CONFIG_440 - } else { - /* ECC bit set method for cached memory */ - dcbz_area(start_address, num_bytes); - /* Write modified dcache lines back to memory */ - clean_dcache_range(start_address, start_address + num_bytes); - } -#endif /* CONFIG_440 */ - - blank_string(strlen(str)); - - sync(); - eieio(); - wait_ddr_idle(); - - /* clear ECC error repoting registers */ - mtsdram(SDRAM_ECCCR, 0xffffffff); - mtdcr(0x4c, 0xffffffff); - - mtsdram(SDRAM_MCOPT1, - (mcopt1 & ~SDRAM_MCOPT1_MCHK_MASK) | SDRAM_MCOPT1_MCHK_CHK_REP); - sync(); - eieio(); - wait_ddr_idle(); - } -} - -/*-----------------------------------------------------------------------------+ - * do_program_ecc. - *-----------------------------------------------------------------------------*/ -static void do_program_ecc(unsigned long tlb_word2_i_value) -{ - unsigned long mcopt1; - unsigned long mcopt2; - unsigned long mcstat; - phys_size_t memsize = sdram_memsize(); - - if (memsize > CONFIG_MAX_MEM_MAPPED) { - printf("\nWarning: Can't enable ECC on systems with more than 2GB of SDRAM!\n"); - return; - } - - mfsdram(SDRAM_MCOPT1, mcopt1); - mfsdram(SDRAM_MCOPT2, mcopt2); - - if ((mcopt1 & SDRAM_MCOPT1_MCHK_MASK) != SDRAM_MCOPT1_MCHK_NON) { - /* DDR controller must be enabled and not in self-refresh. */ - mfsdram(SDRAM_MCSTAT, mcstat); - if (((mcopt2 & SDRAM_MCOPT2_DCEN_MASK) == SDRAM_MCOPT2_DCEN_ENABLE) - && ((mcopt2 & SDRAM_MCOPT2_SREN_MASK) == SDRAM_MCOPT2_SREN_EXIT) - && ((mcstat & (SDRAM_MCSTAT_MIC_MASK | SDRAM_MCSTAT_SRMS_MASK)) - == (SDRAM_MCSTAT_MIC_COMP | SDRAM_MCSTAT_SRMS_NOT_SF))) { - - program_ecc_addr(0, memsize, tlb_word2_i_value); - } - } -} -#endif /* CONFIG_DDR_ECC */ +#endif /* !CONFIG_NAND_SPL */ #if defined(CONFIG_SPD_EEPROM) @@ -439,7 +334,6 @@ typedef enum ddr_cas_id { /*-----------------------------------------------------------------------------+ * Prototypes *-----------------------------------------------------------------------------*/ -static phys_size_t sdram_memsize(void); static void get_spd_info(unsigned long *dimm_populated, unsigned char *iic0_dimm_addr, unsigned long num_dimm_banks); @@ -2405,25 +2299,6 @@ static void program_memory_queue(unsigned long *dimm_populated, #endif } -/*-----------------------------------------------------------------------------+ - * is_ecc_enabled. - *-----------------------------------------------------------------------------*/ -static unsigned long is_ecc_enabled(void) -{ - unsigned long dimm_num; - unsigned long ecc; - unsigned long val; - - ecc = 0; - /* loop through all the DIMM slots on the board */ - for (dimm_num = 0; dimm_num < MAXDIMMS; dimm_num++) { - mfsdram(SDRAM_MCOPT1, val); - ecc = max(ecc, SDRAM_MCOPT1_MCHK_CHK_DECODE(val)); - } - - return ecc; -} - #ifdef CONFIG_DDR_ECC /*-----------------------------------------------------------------------------+ * program_ecc. @@ -2989,21 +2864,6 @@ static void test(void) #else /* CONFIG_SPD_EEPROM */ -/*-----------------------------------------------------------------------------+ - * is_ecc_enabled - *-----------------------------------------------------------------------------*/ -static unsigned long is_ecc_enabled(void) -{ - unsigned long ecc; - unsigned long val; - - ecc = 0; - mfsdram(SDRAM_MCOPT1, val); - ecc = max(ecc, SDRAM_MCOPT1_MCHK_CHK_DECODE(val)); - - return ecc; -} - /*----------------------------------------------------------------------------- * Function: initdram * Description: Configures the PPC4xx IBM DDR1/DDR2 SDRAM memory controller. @@ -3225,18 +3085,6 @@ void mtdcr_any(u32 dcr, u32 val) } } #endif /* defined(CONFIG_440) */ - -void blank_string(int size) -{ - int i; - - for (i = 0; i < size; i++) - putc('\b'); - for (i = 0; i < size; i++) - putc(' '); - for (i = 0; i < size; i++) - putc('\b'); -} #endif /* !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) */ inline void ppc4xx_ibm_ddr2_register_dump(void) diff --git a/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c b/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c index 91bf582..0283c91 100644 --- a/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c +++ b/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c @@ -42,6 +42,8 @@ #include <asm/io.h> #include <asm/processor.h> +#include "ecc.h" + #if defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION) /* @@ -177,7 +179,7 @@ static u32 *get_membase(int bxcr_num) static inline void ecc_clear_status_reg(void) { - mtsdram(SDRAM_ECCCR, 0xffffffff); + mtsdram(SDRAM_ECCES, 0xffffffff); #if defined(SDRAM_R0BAS) mtdcr(SDRAM_ERRSTATLL, 0xffffffff); #endif @@ -210,7 +212,7 @@ static int ecc_check_status_reg(void) * ecc error, then don't count * this as a passing value */ - mfsdram(SDRAM_ECCCR, ecc_status); + mfsdram(SDRAM_ECCES, ecc_status); if (ecc_status != 0x00000000) { /* clear on error */ ecc_clear_status_reg(); diff --git a/cpu/ppc4xx/ecc.c b/cpu/ppc4xx/ecc.c index 3f989e7..f105605 100644 --- a/cpu/ppc4xx/ecc.c +++ b/cpu/ppc4xx/ecc.c @@ -2,7 +2,7 @@ * Copyright (c) 2008 Nuovation System Designs, LLC * Grant Erickson <gerickson@nuovations.com> * - * (C) Copyright 2005-2007 + * (C) Copyright 2005-2009 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * (C) Copyright 2002 @@ -42,81 +42,144 @@ #include <ppc_defs.h> #include <asm/processor.h> #include <asm/io.h> +#include <asm/mmu.h> +#include <asm/cache.h> #include "ecc.h" #if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR) || \ defined(CONFIG_SDRAM_PPC4xx_IBM_DDR2) #if defined(CONFIG_DDR_ECC) || defined(CONFIG_SDRAM_ECC) + +#if defined(CONFIG_405EX) /* - * void ecc_init() - * - * Description: - * This routine initializes a range of DRAM ECC memory with known - * data and enables ECC checking. - * - * TO DO: - * - Improve performance by utilizing cache. - * - Further generalize to make usable by other 4xx variants (e.g. - * 440EPx, et al). - * - * Input(s): - * start - A pointer to the start of memory covered by ECC requiring - * initialization. - * size - The size, in bytes, of the memory covered by ECC requiring - * initialization. - * - * Output(s): - * start - A pointer to the start of memory covered by ECC with - * CONFIG_SYS_ECC_PATTERN written to all locations and ECC data - * primed. - * - * Returns: - * N/A + * Currently only 405EX uses 16bit data bus width as an alternative + * option to 32bit data width (SDRAM0_MCOPT1_WDTH) */ -void ecc_init(unsigned long * const start, unsigned long size) +#define SDRAM_DATA_ALT_WIDTH 2 +#else +#define SDRAM_DATA_ALT_WIDTH 8 +#endif + +static void wait_ddr_idle(void) { - const unsigned long pattern = CONFIG_SYS_ECC_PATTERN; - unsigned long * const end = (unsigned long * const)((long)start + size); - unsigned long * current = start; + u32 val; + + do { + mfsdram(SDRAM_MCSTAT, val); + } while ((val & SDRAM_MCSTAT_IDLE_MASK) == SDRAM_MCSTAT_IDLE_NOT); +} + +static void program_ecc_addr(unsigned long start_address, + unsigned long num_bytes, + unsigned long tlb_word2_i_value) +{ + unsigned long current_address; + unsigned long end_address; + unsigned long address_increment; unsigned long mcopt1; - long increment; + char str[] = "ECC generation -"; + char slash[] = "\\|/-\\|/-"; + int loop = 0; + int loopi = 0; - if (start >= end) - return; + current_address = start_address; + mfsdram(SDRAM_MCOPT1, mcopt1); + if ((mcopt1 & SDRAM_MCOPT1_MCHK_MASK) != SDRAM_MCOPT1_MCHK_NON) { + mtsdram(SDRAM_MCOPT1, + (mcopt1 & ~SDRAM_MCOPT1_MCHK_MASK) | SDRAM_MCOPT1_MCHK_GEN); + sync(); + eieio(); + wait_ddr_idle(); + + puts(str); - mfsdram(SDRAM_ECC_CFG, mcopt1); +#ifdef CONFIG_440 + if (tlb_word2_i_value == TLB_WORD2_I_ENABLE) { +#endif + /* ECC bit set method for non-cached memory */ + if ((mcopt1 & SDRAM_MCOPT1_DMWD_MASK) == SDRAM_MCOPT1_DMWD_32) + address_increment = 4; + else + address_increment = SDRAM_DATA_ALT_WIDTH; + end_address = current_address + num_bytes; - /* Enable ECC generation without checking or reporting */ + while (current_address < end_address) { + *((unsigned long *)current_address) = 0; + current_address += address_increment; - mtsdram(SDRAM_ECC_CFG, ((mcopt1 & ~SDRAM_ECC_CFG_MCHK_MASK) | - SDRAM_ECC_CFG_MCHK_GEN)); + if ((loop++ % (2 << 20)) == 0) { + putc('\b'); + putc(slash[loopi++ % 8]); + } + } +#ifdef CONFIG_440 + } else { + /* ECC bit set method for cached memory */ + dcbz_area(start_address, num_bytes); + /* Write modified dcache lines back to memory */ + clean_dcache_range(start_address, start_address + num_bytes); + } +#endif /* CONFIG_440 */ - increment = sizeof(u32); + blank_string(strlen(str)); -#if defined(CONFIG_440) + sync(); + eieio(); + wait_ddr_idle(); + + /* clear ECC error repoting registers */ + mtsdram(SDRAM_ECCES, 0xffffffff); + mtdcr(0x4c, 0xffffffff); + + mtsdram(SDRAM_MCOPT1, + (mcopt1 & ~SDRAM_MCOPT1_MCHK_MASK) | SDRAM_MCOPT1_MCHK_CHK_REP); + sync(); + eieio(); + wait_ddr_idle(); + } +} + +#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR) +void ecc_init(unsigned long * const start, unsigned long size) +{ /* - * Look at the geometry of SDRAM (data width) to determine whether we - * can skip words when writing. + * Init ECC with cache disabled (on PPC's with IBM DDR + * controller (non DDR2), not tested with cache enabled yet */ + program_ecc_addr((u32)start, size, TLB_WORD2_I_ENABLE); +} +#endif - if ((mcopt1 & SDRAM_ECC_CFG_DMWD_MASK) != SDRAM_ECC_CFG_DMWD_32) - increment = sizeof(u64); -#endif /* defined(CONFIG_440) */ +#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR2) +void do_program_ecc(unsigned long tlb_word2_i_value) +{ + unsigned long mcopt1; + unsigned long mcopt2; + unsigned long mcstat; + phys_size_t memsize = sdram_memsize(); - while (current < end) { - *current = pattern; - current = (unsigned long *)((long)current + increment); + if (memsize > CONFIG_MAX_MEM_MAPPED) { + printf("\nWarning: Can't enable ECC on systems with more than 2GB of SDRAM!\n"); + return; } - /* Wait until the writes are finished. */ + mfsdram(SDRAM_MCOPT1, mcopt1); + mfsdram(SDRAM_MCOPT2, mcopt2); - sync(); + if ((mcopt1 & SDRAM_MCOPT1_MCHK_MASK) != SDRAM_MCOPT1_MCHK_NON) { + /* DDR controller must be enabled and not in self-refresh. */ + mfsdram(SDRAM_MCSTAT, mcstat); + if (((mcopt2 & SDRAM_MCOPT2_DCEN_MASK) == SDRAM_MCOPT2_DCEN_ENABLE) + && ((mcopt2 & SDRAM_MCOPT2_SREN_MASK) == SDRAM_MCOPT2_SREN_EXIT) + && ((mcstat & (SDRAM_MCSTAT_MIC_MASK | SDRAM_MCSTAT_SRMS_MASK)) + == (SDRAM_MCSTAT_MIC_COMP | SDRAM_MCSTAT_SRMS_NOT_SF))) { - /* Enable ECC generation with checking and no reporting */ - - mtsdram(SDRAM_ECC_CFG, ((mcopt1 & ~SDRAM_ECC_CFG_MCHK_MASK) | - SDRAM_ECC_CFG_MCHK_CHK)); + program_ecc_addr(0, memsize, tlb_word2_i_value); + } + } } +#endif + #endif /* defined(CONFIG_DDR_ECC) || defined(CONFIG_SDRAM_ECC) */ #endif /* defined(CONFIG_SDRAM_PPC4xx_IBM_DDR)... */ diff --git a/cpu/ppc4xx/ecc.h b/cpu/ppc4xx/ecc.h index 67c3bff..b258891 100644 --- a/cpu/ppc4xx/ecc.h +++ b/cpu/ppc4xx/ecc.h @@ -2,7 +2,7 @@ * Copyright (c) 2008 Nuovation System Designs, LLC * Grant Erickson <gerickson@nuovations.com> * - * Copyright (c) 2007 DENX Software Engineering, GmbH + * Copyright (c) 2007-2009 DENX Software Engineering, GmbH * Stefan Roese <sr@denx.de> * * See file CREDITS for list of people who contributed to this @@ -25,18 +25,13 @@ * * Description: * This file implements ECC initialization for PowerPC processors - * using the SDRAM DDR2 controller, including the 405EX(r), - * 440SP(E), 460EX and 460GT. + * using the IBM SDRAM DDR1 & DDR2 controller. * */ #ifndef _ECC_H_ #define _ECC_H_ -#if !defined(CONFIG_SYS_ECC_PATTERN) -#define CONFIG_SYS_ECC_PATTERN 0x00000000 -#endif /* !defined(CONFIG_SYS_ECC_PATTERN) */ - /* * Since the IBM DDR controller used on 440GP/GX/EP/GR is not register * compatible to the IBM DDR/2 controller used on 405EX/440SP/SPe/460EX/GT @@ -46,24 +41,35 @@ /* For 440GP/GX/EP/GR */ #if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR) -#define SDRAM_ECC_CFG SDRAM_CFG0 -#define SDRAM_ECC_CFG_MCHK_MASK SDRAM_CFG0_MCHK_MASK -#define SDRAM_ECC_CFG_MCHK_GEN SDRAM_CFG0_MCHK_GEN -#define SDRAM_ECC_CFG_MCHK_CHK SDRAM_CFG0_MCHK_CHK -#define SDRAM_ECC_CFG_DMWD_MASK SDRAM_CFG0_DMWD_MASK -#define SDRAM_ECC_CFG_DMWD_32 SDRAM_CFG0_DMWD_32 -#endif +#define SDRAM_MCOPT1 SDRAM_CFG0 +#define SDRAM_MCOPT1_MCHK_MASK SDRAM_CFG0_MCHK_MASK +#define SDRAM_MCOPT1_MCHK_NON SDRAM_CFG0_MCHK_NON +#define SDRAM_MCOPT1_MCHK_GEN SDRAM_CFG0_MCHK_GEN +#define SDRAM_MCOPT1_MCHK_CHK SDRAM_CFG0_MCHK_CHK +#define SDRAM_MCOPT1_MCHK_CHK_REP SDRAM_CFG0_MCHK_CHK +#define SDRAM_MCOPT1_DMWD_MASK SDRAM_CFG0_DMWD_MASK +#define SDRAM_MCOPT1_DMWD_32 SDRAM_CFG0_DMWD_32 + +#define SDRAM_MCSTAT SDRAM0_MCSTS +#define SDRAM_MCSTAT_IDLE_MASK SDRAM_MCSTS_CIS +#define SDRAM_MCSTAT_IDLE_NOT SDRAM_MCSTS_IDLE_NOT -/* For 405EX/440SP/SPe/460EX/GT */ -#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR2) -#define SDRAM_ECC_CFG SDRAM_MCOPT1 -#define SDRAM_ECC_CFG_MCHK_MASK SDRAM_MCOPT1_MCHK_MASK -#define SDRAM_ECC_CFG_MCHK_GEN SDRAM_MCOPT1_MCHK_GEN -#define SDRAM_ECC_CFG_MCHK_CHK SDRAM_MCOPT1_MCHK_CHK -#define SDRAM_ECC_CFG_DMWD_MASK SDRAM_MCOPT1_DMWD_MASK -#define SDRAM_ECC_CFG_DMWD_32 SDRAM_MCOPT1_DMWD_32 +#define SDRAM_ECCES SDRAM0_ECCESR #endif -extern void ecc_init(unsigned long * const start, unsigned long size); +void ecc_init(unsigned long * const start, unsigned long size); +void do_program_ecc(unsigned long tlb_word2_i_value); + +static void inline blank_string(int size) +{ + int i; + + for (i = 0; i < size; i++) + putc('\b'); + for (i = 0; i < size; i++) + putc(' '); + for (i = 0; i < size; i++) + putc('\b'); +} #endif /* _ECC_H_ */ |