diff options
author | Stefano Babic <sbabic@denx.de> | 2015-02-13 10:17:01 (GMT) |
---|---|---|
committer | Stefano Babic <sbabic@denx.de> | 2015-02-13 10:17:01 (GMT) |
commit | e72d344386bf80738fab7a6bd37cb321f443093a (patch) | |
tree | d3e02055e6aa903ab80ef87c78d2f38e93981dcf /doc/README.t1040-l2switch | |
parent | 258c98f8d36ef35d7cb7604847ba73e64d702c2a (diff) | |
parent | bd2a4888b123713adec271d6c8040ca9f609aa2f (diff) | |
download | u-boot-e72d344386bf80738fab7a6bd37cb321f443093a.tar.xz |
Merge branch 'master' of git://git.denx.de/u-boot
Diffstat (limited to 'doc/README.t1040-l2switch')
-rw-r--r-- | doc/README.t1040-l2switch | 48 |
1 files changed, 48 insertions, 0 deletions
diff --git a/doc/README.t1040-l2switch b/doc/README.t1040-l2switch new file mode 100644 index 0000000..14dbf31 --- /dev/null +++ b/doc/README.t1040-l2switch @@ -0,0 +1,48 @@ +This file contains information for VSC9953, a Vitesse L2 Switch IP +which is integrated in the T1040/T1020 Freescale SoCs. + +About Device: +============= +VSC9953 is an 8-port Gigabit Ethernet switch supports the following features: + - 8192 MAC addresses + - Static Address provisioning + - Dynamic learning of MAC addresses and aging + - 4096 VLANs + - Independent and shared VLAN learning (IVL, SVL) + - Policing with storm control and MC/BC protection + - IPv4 and IPv6 multicast + - Jumbo frames (9.6 KB) + - Access Control List + - VLAN editing, translation and remarking + - RMON counters per port + +Switch interfaces: + - 8 Gigabit switch ports (ports 0 to 7) are external and are connected to external PHYs + - 2 switch ports (ports 8 and 9) of 2.5 G are connected (fixed links) + to FMan ports (FM1@DTSEC1 and FM1@DTSEC2) + +Commands Overview: +============= +Commands supported + - enable/disable a port + - check a port's link speed, duplexity and status. + +Commands syntax + ethsw port <port_nr> enable|disable - enable/disable an l2 switch port + ethsw port <port_nr> show - show an l2 switch port's configuration + + port_nr=0..9; use "all" for all ports + +=> ethsw port all show + Port Status Link Speed Duplex + 0 enabled down 10 half + 1 enabled down 10 half + 2 enabled down 10 half + 3 enabled up 1000 full + 4 disabled down - half + 5 disabled down - half + 6 disabled down - half + 7 disabled down - half + 8 enabled up 2500 full + 9 enabled up 2500 full +=> |