Merge branch 'master' of git://git.denx.de/u-boot-rockchip

2 files changed, 68 insertions, 1 deletions

diff --git a/doc/README.rockchip b/doc/README.rockchip
index dbeb8be..12fec38 100644
--- a/doc/README.rockchip
+++ b/doc/README.rockchip
@@ -130,7 +130,7 @@ load a second-level bootloader(ie. U-BOOT) as soon as it returns to bootrom.
 Therefore RK3288 has another loading sequence like RK3036. The option of
 U-Boot is controlled with this setting in U-Boot:
 
-	#define CONFIG_ROCKCHIP_SPL_BACK_TO_BROM
+	#define CONFIG_SPL_ROCKCHIP_BACK_TO_BROM
 
 You can create the image via the following operations:
 
diff --git a/doc/device-tree-bindings/clock/rockchip,rk3368-dmc.txt b/doc/device-tree-bindings/clock/rockchip,rk3368-dmc.txt
new file mode 100644
index 0000000..8e7357d
--- /dev/null
+++ b/doc/device-tree-bindings/clock/rockchip,rk3368-dmc.txt
@@ -0,0 +1,67 @@
+RK3368 dynamic memory controller driver
+=======================================
+
+The RK3368 DMC (dynamic memory controller) driver supports setup/initialisation
+during TPL using configuration data from the DTS (i.e. OF_PLATDATA), based on
+the following key configuration data:
+  (a) a target-frequency (i.e. operating point) for the memory operation
+  (b) a speed-bin (as defined in JESD-79) for the DDR3 used in hardware
+  (c) a memory-schedule (i.e. mapping from physical addresses to the address
+      pins of the memory bus)
+
+Required properties
+-------------------
+
+- compatible: "rockchip,rk3368-dmc"
+- reg
+    protocol controller (PCTL) address and PHY controller (DDRPHY) address
+- rockchip,ddr-speed-bin
+    the DDR3 device's speed-bin (as specified according to JESD-79)
+        DDR3_800D (5-5-5)
+        DDR3_800E (6-6-6)
+        DDR3_1066E (6-6-6)
+        DDR3_1066F (7-7-7)
+        DDR3_1066G (8-8-8)
+        DDR3_1333F (7-7-7)
+        DDR3_1333G (8-8-8)
+        DDR3_1333H (9-9-9)
+        DDR3_1333J (10-10-10)
+        DDR3_1600G (8-8-8)
+        DDR3_1600H (9-9-9)
+        DDR3_1600J (10-10-10)
+        DDR3_1600K (11-11-11)
+        DDR3_1866J (10-10-10)
+        DDR3_1866K (11-11-11)
+        DDR3_1866L (12-12-12)
+        DDR3_1866M (13-13-13)
+        DDR3_2133K (11-11-11)
+        DDR3_2133L (12-12-12)
+        DDR3_2133M (13-13-13)
+        DDR3_2133N (14-14-14)
+- rockchip,ddr-frequency:
+    target DDR clock frequency in Hz (not all frequencies may be supported,
+    as there's some cooperation from the clock-driver required)
+- rockchip,memory-schedule:
+    controls the decoding of physical addresses to DRAM addressing (i.e. how
+    the physical address maps onto the address pins/chip-select of the device)
+	DMC_MSCH_CBDR: column -> bank -> device -> row
+	DMC_MSCH_CBRD: column -> band -> row -> device
+	DMC_MSCH_CRBD: column -> row -> band -> device
+
+Example (for DDR3-1600K and 800MHz)
+-----------------------------------
+
+	#include <dt-bindings/memory/rk3368-dmc.h>
+
+	dmc: dmc@ff610000 {
+	        u-boot,dm-pre-reloc;
+		compatible = "rockchip,rk3368-dmc";
+		reg = <0 0xff610000 0 0x400
+		       0 0xff620000 0 0x400>;
+	};
+
+	&dmc {
+		rockchip,ddr-speed-bin = <DDR3_1600K>;
+		rockchip,ddr-frequency = <800000000>;
+		rockchip,memory-schedule = <DMC_MSCH_CBRD>;
+	};