diff options
author | Kevin Smith <kevin.smith@elecsyscorp.com> | 2015-10-23 17:53:19 (GMT) |
---|---|---|
committer | Luka Perkov <luka.perkov@sartura.hr> | 2015-11-17 22:41:41 (GMT) |
commit | 544acb07ecebc096c9449e675481ba280311fb0b (patch) | |
tree | 3e322a650976aa6972e69d84cf65e9b7e0664ae4 /drivers/ddr/marvell | |
parent | 3d4825446e4258192e1f2302d691a8c0c82a0975 (diff) | |
download | u-boot-544acb07ecebc096c9449e675481ba280311fb0b.tar.xz |
arm: mvebu: a38x: Remove unsupported topologies
A lot of extra configuration information was left over in the
Marvell serdes and DDR3 initialization code for boards that
U-boot does not support. Remove this extra config information,
and the concept of fixing up board topologies with information
loaded from an EEPROM. If this needs to be done, it should be
handled in the board file, not in core code.
Signed-off-by: Kevin Smith <kevin.smith@elecsyscorp.com>
Acked-by: Stefan Roese <sr@denx.de>
Cc: Dirk Eibach <eibach@gdsys.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Diffstat (limited to 'drivers/ddr/marvell')
-rw-r--r-- | drivers/ddr/marvell/a38x/ddr3_a38x.h | 5 | ||||
-rw-r--r-- | drivers/ddr/marvell/a38x/ddr3_init.c | 72 |
2 files changed, 0 insertions, 77 deletions
diff --git a/drivers/ddr/marvell/a38x/ddr3_a38x.h b/drivers/ddr/marvell/a38x/ddr3_a38x.h index 49621bc..1ed5174 100644 --- a/drivers/ddr/marvell/a38x/ddr3_a38x.h +++ b/drivers/ddr/marvell/a38x/ddr3_a38x.h @@ -12,11 +12,6 @@ #include "ddr3_hws_hw_training_def.h" -/* Allow topolgy update from board TWSI device*/ -#if !defined(CONFIG_CUSTOMER_BOARD_SUPPORT) -#define MV_DDR_TOPOLOGY_UPDATE_FROM_TWSI -#endif - #define ECC_SUPPORT /* right now, we're not supporting this in mainline */ diff --git a/drivers/ddr/marvell/a38x/ddr3_init.c b/drivers/ddr/marvell/a38x/ddr3_init.c index d6ed8e0..556f877 100644 --- a/drivers/ddr/marvell/a38x/ddr3_init.c +++ b/drivers/ddr/marvell/a38x/ddr3_init.c @@ -96,7 +96,6 @@ u8 generic_init_controller = 1; static u32 ddr3_get_static_ddr_mode(void); #endif static int ddr3_hws_tune_training_params(u8 dev_num); -static int ddr3_update_topology_map(struct hws_topology_map *topology_map); /* device revision */ #define DEV_VERSION_ID_REG 0x1823c @@ -383,14 +382,6 @@ int ddr3_init(void) } #endif - /* Load topology for New Training IP */ - status = ddr3_load_topology_map(); - if (MV_OK != status) { - printf("%s Training Sequence topology load - FAILED\n", - ddr_type); - return status; - } - /* Tune training algo paramteres */ status = ddr3_hws_tune_training_params(0); if (MV_OK != status) @@ -539,27 +530,6 @@ u32 ddr3_get_cs_num_from_reg(void) return cs_count; } -/* - * Name: ddr3_load_topology_map - * Desc: - * Args: - * Notes: - * Returns: - */ -int ddr3_load_topology_map(void) -{ - struct hws_topology_map *tm = ddr3_get_topology_map(); - -#if defined(MV_DDR_TOPOLOGY_UPDATE_FROM_TWSI) - /* Update topology data */ - if (MV_OK != ddr3_update_topology_map(tm)) { - DEBUG_INIT_FULL_S("Failed update of DDR3 Topology map\n"); - } -#endif - - return MV_OK; -} - void get_target_freq(u32 freq_mode, u32 *ddr_freq, u32 *hclk_ps) { u32 tmp, hclk = 200; @@ -781,48 +751,6 @@ int ddr3_calc_mem_cs_size(u32 cs, u32 *cs_size) return MV_OK; } -#if defined(MV_DDR_TOPOLOGY_UPDATE_FROM_TWSI) -/* - * Name: ddr3_update_topology_map - * Desc: - * Args: - * Notes: Update topology map by Sat_r values - * Returns: - */ -static int ddr3_update_topology_map(struct hws_topology_map *tm) -{ - struct topology_update_info topology_update_info; - - topology_update_info.update_width = 0; - topology_update_info.update_ecc = 0; - topology_update_info.update_ecc_pup3_mode = 0; - sys_env_get_topology_update_info(&topology_update_info); - if (topology_update_info.update_width) { - tm->bus_act_mask &= - ~(TOPOLOGY_UPDATE_WIDTH_32BIT_MASK); - if (topology_update_info.width == TOPOLOGY_UPDATE_WIDTH_16BIT) - tm->bus_act_mask = - TOPOLOGY_UPDATE_WIDTH_16BIT_MASK; - else - tm->bus_act_mask = - TOPOLOGY_UPDATE_WIDTH_32BIT_MASK; - } - - if (topology_update_info.update_ecc) { - if (topology_update_info.ecc == TOPOLOGY_UPDATE_ECC_OFF) { - tm->bus_act_mask &= - ~(1 << topology_update_info.ecc_pup_mode_offset); - } else { - tm->bus_act_mask |= - topology_update_info. - ecc << topology_update_info.ecc_pup_mode_offset; - } - } - - return MV_OK; -} -#endif - /* * Name: ddr3_hws_tune_training_params * Desc: |