diff options
author | Wolfgang Denk <wd@denx.de> | 2011-10-04 20:20:25 (GMT) |
---|---|---|
committer | Wolfgang Denk <wd@denx.de> | 2011-10-04 20:20:25 (GMT) |
commit | 4f7549d2dc00023c5f33d1adc7fee0a77575fcb2 (patch) | |
tree | f87d6f02fe74f832d18ab8c11feb0978da53014a /drivers/mtd/nand | |
parent | 1fed668b3fb9c35932f58af00ff5539239fa4e1d (diff) | |
parent | 169de9059f24f50c4c7ac794ded060b2c133a29c (diff) | |
download | u-boot-4f7549d2dc00023c5f33d1adc7fee0a77575fcb2.tar.xz |
Merge branch 'master' of git://git.denx.de/u-boot-nand-flash
* 'master' of git://git.denx.de/u-boot-nand-flash:
PPC: Fix socrates NAND problem
PPC: Fix fsl_upm.c by renaming nand handling functions
NAND: Make page, erase, oob size available via cmd_nand
mtd: eLBC NAND: remove elbc_fcm_ctrl->oob_poi
NAND: Add -y option to nand scrub command
NAND: Add nand read.raw and write.raw commands
NAND: Really ignore bad blocks when scrubbing
spl, nand: add 4bit HW ecc oob first nand_read_page function
mxc_nand: fix a problem writing more than 32MB
mxc_nand: fixed some typos (cosmetic)
nand: increase chip_delay in mv kirkwood nand driver
Diffstat (limited to 'drivers/mtd/nand')
-rw-r--r-- | drivers/mtd/nand/fsl_elbc_nand.c | 32 | ||||
-rw-r--r-- | drivers/mtd/nand/fsl_upm.c | 16 | ||||
-rw-r--r-- | drivers/mtd/nand/kirkwood_nand.c | 2 | ||||
-rw-r--r-- | drivers/mtd/nand/mxc_nand.c | 32 | ||||
-rw-r--r-- | drivers/mtd/nand/nand_base.c | 2 | ||||
-rw-r--r-- | drivers/mtd/nand/nand_util.c | 29 |
6 files changed, 41 insertions, 72 deletions
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index acdb431..4d1e527 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -85,7 +85,6 @@ struct fsl_elbc_ctrl { unsigned int mdr; /* UPM/FCM Data Register value */ unsigned int use_mdr; /* Non zero if the MDR is to be set */ unsigned int oob; /* Non zero if operating on OOB data */ - uint8_t *oob_poi; /* Place to write ECC after read back */ }; /* These map to the positions used by the FCM hardware ECC generator */ @@ -436,7 +435,6 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command, /* PAGEPROG reuses all of the setup from SEQIN and adds the length */ case NAND_CMD_PAGEPROG: { - int full_page; vdbg("fsl_elbc_cmdfunc: NAND_CMD_PAGEPROG " "writing %d bytes.\n", ctrl->index); @@ -445,34 +443,13 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command, * write so the HW generates the ECC. */ if (ctrl->oob || ctrl->column != 0 || - ctrl->index != mtd->writesize + mtd->oobsize) { + ctrl->index != mtd->writesize + mtd->oobsize) out_be32(&lbc->fbcr, ctrl->index); - full_page = 0; - } else { + else out_be32(&lbc->fbcr, 0); - full_page = 1; - } fsl_elbc_run_command(mtd); - /* Read back the page in order to fill in the ECC for the - * caller. Is this really needed? - */ - if (full_page && ctrl->oob_poi) { - out_be32(&lbc->fbcr, 3); - set_addr(mtd, 6, page_addr, 1); - - ctrl->read_bytes = mtd->writesize + 9; - - fsl_elbc_do_read(chip, 1); - fsl_elbc_run_command(mtd); - - memcpy_fromio(ctrl->oob_poi + 6, - &ctrl->addr[ctrl->index], 3); - ctrl->index += 3; - } - - ctrl->oob_poi = NULL; return; } @@ -680,13 +657,8 @@ static void fsl_elbc_write_page(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf) { - struct fsl_elbc_mtd *priv = chip->priv; - struct fsl_elbc_ctrl *ctrl = priv->ctrl; - fsl_elbc_write_buf(mtd, buf, mtd->writesize); fsl_elbc_write_buf(mtd, chip->oob_poi, mtd->oobsize); - - ctrl->oob_poi = chip->oob_poi; } static struct fsl_elbc_ctrl *elbc_ctrl; diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c index c33e278..31c174b 100644 --- a/drivers/mtd/nand/fsl_upm.c +++ b/drivers/mtd/nand/fsl_upm.c @@ -124,14 +124,14 @@ static void fun_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) fun_wait(fun); } -static u8 nand_read_byte(struct mtd_info *mtd) +static u8 upm_nand_read_byte(struct mtd_info *mtd) { struct nand_chip *chip = mtd->priv; return in_8(chip->IO_ADDR_R); } -static void nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len) +static void upm_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len) { int i; struct nand_chip *chip = mtd->priv; @@ -147,7 +147,7 @@ static void nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len) fun_wait(fun); } -static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) +static void upm_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) { int i; struct nand_chip *chip = mtd->priv; @@ -156,7 +156,7 @@ static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) buf[i] = in_8(chip->IO_ADDR_R); } -static int nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len) +static int upm_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len) { int i; struct nand_chip *chip = mtd->priv; @@ -191,10 +191,10 @@ int fsl_upm_nand_init(struct nand_chip *chip, struct fsl_upm_nand *fun) #if CONFIG_SYS_NAND_MAX_CHIPS > 1 chip->select_chip = fun_select_chip; #endif - chip->read_byte = nand_read_byte; - chip->read_buf = nand_read_buf; - chip->write_buf = nand_write_buf; - chip->verify_buf = nand_verify_buf; + chip->read_byte = upm_nand_read_byte; + chip->read_buf = upm_nand_read_buf; + chip->write_buf = upm_nand_write_buf; + chip->verify_buf = upm_nand_verify_buf; if (fun->dev_ready) chip->dev_ready = nand_dev_ready; diff --git a/drivers/mtd/nand/kirkwood_nand.c b/drivers/mtd/nand/kirkwood_nand.c index 376378e..bdab5aa 100644 --- a/drivers/mtd/nand/kirkwood_nand.c +++ b/drivers/mtd/nand/kirkwood_nand.c @@ -76,7 +76,7 @@ int board_nand_init(struct nand_chip *nand) nand->options = NAND_COPYBACK | NAND_CACHEPRG | NAND_NO_PADDING; nand->ecc.mode = NAND_ECC_SOFT; nand->cmd_ctrl = kw_nand_hwcontrol; - nand->chip_delay = 30; + nand->chip_delay = 40; nand->select_chip = kw_nand_select_chip; return 0; } diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index 2a8dd7e..35e89a0 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -350,7 +350,7 @@ static void send_addr(struct mxc_nand_host *host, uint16_t addr) } /* - * This function requests the NANDFC to initate the transfer + * This function requests the NANDFC to initiate the transfer * of data currently in the NANDFC RAM buffer to the NAND device. */ static void send_prog_page(struct mxc_nand_host *host, uint8_t buf_id, @@ -394,7 +394,7 @@ static void send_prog_page(struct mxc_nand_host *host, uint8_t buf_id, } /* - * Requests NANDFC to initated the transfer of data from the + * Requests NANDFC to initiate the transfer of data from the * NAND device into in the NANDFC ram buffer. */ static void send_read_page(struct mxc_nand_host *host, uint8_t buf_id, @@ -637,7 +637,7 @@ static int mxc_nand_read_page_syndrome(struct mtd_info *mtd, MTDDEBUG(MTD_DEBUG_LEVEL1, "Reading page %u to buf %p oob %p\n", host->page_addr, buf, oob); - /* first read out the data area and the available portion of OOB */ + /* first read the data area and the available portion of OOB */ for (n = 0; eccsteps; n++, eccsteps--, p += eccsize) { int stat; @@ -1179,7 +1179,7 @@ void mxc_nand_command(struct mtd_info *mtd, unsigned command, /* * before sending SEQIN command for partial write, * we need read one page out. FSL NFC does not support - * partial write. It alway send out 512+ecc+512+ecc ... + * partial write. It always sends out 512+ecc+512+ecc * for large page nand flash. But for small page nand * flash, it does support SPARE ONLY operation. */ @@ -1209,7 +1209,7 @@ void mxc_nand_command(struct mtd_info *mtd, unsigned command, send_prog_page(host, 0, host->spare_only); if (host->pagesize_2k && !is_mxc_nfc_11()) { - /* data in 4 areas datas */ + /* data in 4 areas */ send_prog_page(host, 1, host->spare_only); send_prog_page(host, 2, host->spare_only); send_prog_page(host, 3, host->spare_only); @@ -1225,10 +1225,9 @@ void mxc_nand_command(struct mtd_info *mtd, unsigned command, if (column != -1) { /* * MXC NANDFC can only perform full page+spare or - * spare-only read/write. When the upper layers - * layers perform a read/write buf operation, - * we will used the saved column adress to index into - * the full page. + * spare-only read/write. When the upper layers perform + * a read/write buffer operation, we will use the saved + * column address to index into the full page. */ send_addr(host, 0); if (host->pagesize_2k) @@ -1372,12 +1371,23 @@ int board_nand_init(struct nand_chip *this) /* Blocks to be unlocked */ writew(0x0, &host->regs->nfc_unlockstart_blkaddr); - writew(0x4000, &host->regs->nfc_unlockend_blkaddr); + /* Originally (Freescale LTIB 2.6.21) 0x4000 was written to the + * unlockend_blkaddr, but the magic 0x4000 does not always work + * when writing more than some 32 megabytes (on 2k page nands) + * However 0xFFFF doesn't seem to have this kind + * of limitation (tried it back and forth several times). + * The linux kernel driver sets this to 0xFFFF for the v2 controller + * only, but probably this was not tested there for v1. + * The very same limitation seems to apply to this kernel driver. + * This might be NAND chip specific and the i.MX31 datasheet is + * extremely vague about the semantics of this register. + */ + writew(0xFFFF, &host->regs->nfc_unlockend_blkaddr); /* Unlock Block Command for given address range */ writew(0x4, &host->regs->nfc_wrprot); - /* NAND bus width determines access funtions used by upper layer */ + /* NAND bus width determines access functions used by upper layer */ if (is_16bit_nand()) this->options |= NAND_BUSWIDTH_16; diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index e7dfcb1..6aac6a2 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -2224,7 +2224,7 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, /* * heck if we have a bad block, we do not erase bad blocks ! */ - if (nand_block_checkbad(mtd, ((loff_t) page) << + if (!instr->scrub && nand_block_checkbad(mtd, ((loff_t) page) << chip->page_shift, 0, allowbbt)) { printk(KERN_WARNING "nand_erase: attempt to erase a " "bad block at page 0x%08x\n", page); diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c index 81bf366..60c778e 100644 --- a/drivers/mtd/nand/nand_util.c +++ b/drivers/mtd/nand/nand_util.c @@ -57,12 +57,6 @@ typedef struct mtd_info mtd_info_t; #define cpu_to_je16(x) (x) #define cpu_to_je32(x) (x) -/*****************************************************************************/ -static int nand_block_bad_scrub(struct mtd_info *mtd, loff_t ofs, int getchip) -{ - return 0; -} - /** * nand_erase_opts: - erase NAND flash with support for various options * (jffs2 formating) @@ -82,7 +76,6 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts) int bbtest = 1; int result; int percent_complete = -1; - int (*nand_block_bad_old)(struct mtd_info *, loff_t, int) = NULL; const char *mtd_device = meminfo->name; struct mtd_oob_ops oob_opts; struct nand_chip *chip = meminfo->priv; @@ -110,17 +103,15 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts) * and disable bad block table while erasing. */ if (opts->scrub) { - struct nand_chip *priv_nand = meminfo->priv; - - nand_block_bad_old = priv_nand->block_bad; - priv_nand->block_bad = nand_block_bad_scrub; - /* we don't need the bad block table anymore... + erase.scrub = opts->scrub; + /* + * We don't need the bad block table anymore... * after scrub, there are no bad blocks left! */ - if (priv_nand->bbt) { - kfree(priv_nand->bbt); + if (chip->bbt) { + kfree(chip->bbt); } - priv_nand->bbt = NULL; + chip->bbt = NULL; } for (erased_length = 0; @@ -204,12 +195,8 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts) if (!opts->quiet) printf("\n"); - if (nand_block_bad_old) { - struct nand_chip *priv_nand = meminfo->priv; - - priv_nand->block_bad = nand_block_bad_old; - priv_nand->scan_bbt(meminfo); - } + if (opts->scrub) + chip->scan_bbt(meminfo); return 0; } |