diff options
author | Tom Rini <trini@konsulko.com> | 2015-10-15 12:43:38 (GMT) |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2015-10-15 12:43:38 (GMT) |
commit | cb4c833b74e40b2e9bce8702f1d5e11fa823292d (patch) | |
tree | 4b8b784653104e1910d73b0e649c07b495e7e2b4 /drivers/mtd/nand | |
parent | c57a9a6350f60f5f9ae18d0c55efcd79b2204be3 (diff) | |
parent | cf04ad3219260c3c39ec3dbfe2427e3463e8dbd5 (diff) | |
download | u-boot-cb4c833b74e40b2e9bce8702f1d5e11fa823292d.tar.xz |
Merge branch 'master' of git://www.denx.de/git/u-boot-imx
Diffstat (limited to 'drivers/mtd/nand')
-rw-r--r-- | drivers/mtd/nand/vf610_nfc.c | 247 |
1 files changed, 138 insertions, 109 deletions
diff --git a/drivers/mtd/nand/vf610_nfc.c b/drivers/mtd/nand/vf610_nfc.c index 5c11ac9..06266f3 100644 --- a/drivers/mtd/nand/vf610_nfc.c +++ b/drivers/mtd/nand/vf610_nfc.c @@ -1,5 +1,5 @@ /* - * Copyright 2009-2014 Freescale Semiconductor, Inc. and others + * Copyright 2009-2015 Freescale Semiconductor, Inc. and others * * Description: MPC5125, VF610, MCF54418 and Kinetis K70 Nand driver. * Ported to U-Boot by Stefan Agner @@ -19,9 +19,10 @@ * * Limitations: * - Untested on MPC5125 and M54418. - * - DMA not used. + * - DMA and pipelining not used. * - 2K pages or less. - * - Only 2K page w. 64+OOB and hardware ECC. + * - HW ECC: Only 2K page with 64+ OOB. + * - HW ECC: Only 24 and 32-bit error correction implemented. */ #include <common.h> @@ -53,6 +54,7 @@ #define PAGE_2K 0x0800 #define OOB_64 0x0040 +#define OOB_MAX 0x0100 /* * NFC_CMD2[CODE] values. See section: @@ -127,32 +129,33 @@ #define NFC_TIMEOUT (1000) -/* ECC status placed at end of buffers. */ -#define ECC_SRAM_ADDR ((PAGE_2K+256-8) >> 3) -#define ECC_STATUS_MASK 0x80 -#define ECC_ERR_COUNT 0x3F - /* - * ECC status is stored at NFC_CFG[ECCADD] +4 for little-endian - * and +7 for big-endian SOC. + * ECC status - seems to consume 8 bytes (double word). The documented + * status byte is located in the lowest byte of the second word (which is + * the 4th or 7th byte depending on endianness). + * Calculate an offset to store the ECC status at the end of the buffer. */ -#ifdef CONFIG_VF610 -#define ECC_OFFSET 4 -#else -#define ECC_OFFSET 7 -#endif +#define ECC_SRAM_ADDR (PAGE_2K + OOB_MAX - 8) + +#define ECC_STATUS 0x4 +#define ECC_STATUS_MASK 0x80 +#define ECC_STATUS_ERR_COUNT 0x3F + +enum vf610_nfc_alt_buf { + ALT_BUF_DATA = 0, + ALT_BUF_ID = 1, + ALT_BUF_STAT = 2, + ALT_BUF_ONFI = 3, +}; struct vf610_nfc { - struct mtd_info *mtd; - struct nand_chip chip; - void __iomem *regs; - uint column; + struct mtd_info *mtd; + struct nand_chip chip; + void __iomem *regs; + uint buf_offset; + int write_sz; /* Status and ID are in alternate locations. */ - int alt_buf; -#define ALT_BUF_ID 1 -#define ALT_BUF_STAT 2 -#define ALT_BUF_ONFI 3 - struct clk *clk; + enum vf610_nfc_alt_buf alt_buf; }; #define mtd_to_nfc(_mtd) \ @@ -170,8 +173,8 @@ static struct nand_ecclayout vf610_nfc_ecc = { 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63}, .oobfree = { - {.offset = 8, - .length = 11} } + {.offset = 2, + .length = 17} } }; #elif defined(CONFIG_SYS_NAND_VF610_NFC_60_ECC_BYTES) #define ECC_HW_MODE ECC_60_BYTE @@ -226,8 +229,12 @@ static inline void vf610_nfc_set_field(struct mtd_info *mtd, u32 reg, static inline void vf610_nfc_memcpy(void *dst, const void *src, size_t n) { /* - * Use this accessor for the interal SRAM buffers. On ARM we can - * treat the SRAM buffer as if its memory, hence use memcpy + * Use this accessor for the internal SRAM buffers. On the ARM + * Freescale Vybrid SoC it's known that the driver can treat + * the SRAM buffer as if it's memory. Other platform might need + * to treat the buffers differently. + * + * For the time being, use memcpy */ memcpy(dst, src, n); } @@ -242,7 +249,7 @@ static inline void vf610_nfc_clear_status(void __iomem *regbase) } /* Wait for complete operation */ -static inline void vf610_nfc_done(struct mtd_info *mtd) +static void vf610_nfc_done(struct mtd_info *mtd) { struct vf610_nfc *nfc = mtd_to_nfc(mtd); uint start; @@ -260,7 +267,7 @@ static inline void vf610_nfc_done(struct mtd_info *mtd) while (!(vf610_nfc_read(mtd, NFC_IRQ_STATUS) & IDLE_IRQ_BIT)) { if (get_timer(start) > NFC_TIMEOUT) { - printf("Timeout while waiting for !BUSY.\n"); + printf("Timeout while waiting for IDLE.\n"); return; } } @@ -273,11 +280,13 @@ static u8 vf610_nfc_get_id(struct mtd_info *mtd, int col) if (col < 4) { flash_id = vf610_nfc_read(mtd, NFC_FLASH_STATUS1); - return (flash_id >> (3-col)*8) & 0xff; + flash_id >>= (3 - col) * 8; } else { flash_id = vf610_nfc_read(mtd, NFC_FLASH_STATUS2); - return flash_id >> 24; + flash_id >>= 24; } + + return flash_id & 0xff; } static u8 vf610_nfc_get_status(struct mtd_info *mtd) @@ -345,26 +354,28 @@ static void vf610_nfc_command(struct mtd_info *mtd, unsigned command, int column, int page) { struct vf610_nfc *nfc = mtd_to_nfc(mtd); - int page_sz = nfc->chip.options & NAND_BUSWIDTH_16 ? 1 : 0; + int trfr_sz = nfc->chip.options & NAND_BUSWIDTH_16 ? 1 : 0; - nfc->column = max(column, 0); - nfc->alt_buf = 0; + nfc->buf_offset = max(column, 0); + nfc->alt_buf = ALT_BUF_DATA; switch (command) { case NAND_CMD_SEQIN: /* Use valid column/page from preread... */ vf610_nfc_addr_cycle(mtd, column, page); + nfc->buf_offset = 0; + /* * SEQIN => data => PAGEPROG sequence is done by the controller * hence we do not need to issue the command here... */ return; case NAND_CMD_PAGEPROG: - page_sz += mtd->writesize + mtd->oobsize; - vf610_nfc_transfer_size(nfc->regs, page_sz); + trfr_sz += nfc->write_sz; + vf610_nfc_ecc_mode(mtd, ECC_HW_MODE); + vf610_nfc_transfer_size(nfc->regs, trfr_sz); vf610_nfc_send_commands(nfc->regs, NAND_CMD_SEQIN, command, PROGRAM_PAGE_CMD_CODE); - vf610_nfc_ecc_mode(mtd, ECC_HW_MODE); break; case NAND_CMD_RESET: @@ -373,9 +384,9 @@ static void vf610_nfc_command(struct mtd_info *mtd, unsigned command, break; case NAND_CMD_READOOB: - page_sz += mtd->oobsize; + trfr_sz += mtd->oobsize; column = mtd->writesize; - vf610_nfc_transfer_size(nfc->regs, page_sz); + vf610_nfc_transfer_size(nfc->regs, trfr_sz); vf610_nfc_send_commands(nfc->regs, NAND_CMD_READ0, NAND_CMD_READSTART, READ_PAGE_CMD_CODE); vf610_nfc_addr_cycle(mtd, column, page); @@ -383,18 +394,18 @@ static void vf610_nfc_command(struct mtd_info *mtd, unsigned command, break; case NAND_CMD_READ0: - page_sz += mtd->writesize + mtd->oobsize; - column = 0; - vf610_nfc_transfer_size(nfc->regs, page_sz); + trfr_sz += mtd->writesize + mtd->oobsize; + vf610_nfc_transfer_size(nfc->regs, trfr_sz); + vf610_nfc_ecc_mode(mtd, ECC_HW_MODE); vf610_nfc_send_commands(nfc->regs, NAND_CMD_READ0, NAND_CMD_READSTART, READ_PAGE_CMD_CODE); vf610_nfc_addr_cycle(mtd, column, page); - vf610_nfc_ecc_mode(mtd, ECC_HW_MODE); break; case NAND_CMD_PARAM: nfc->alt_buf = ALT_BUF_ONFI; - vf610_nfc_transfer_size(nfc->regs, 768); + trfr_sz = 3 * sizeof(struct nand_onfi_params); + vf610_nfc_transfer_size(nfc->regs, trfr_sz); vf610_nfc_send_command(nfc->regs, NAND_CMD_PARAM, READ_ONFI_PARAM_CMD_CODE); vf610_nfc_set_field(mtd, NFC_ROW_ADDR, ROW_ADDR_MASK, @@ -411,7 +422,7 @@ static void vf610_nfc_command(struct mtd_info *mtd, unsigned command, case NAND_CMD_READID: nfc->alt_buf = ALT_BUF_ID; - nfc->column = 0; + nfc->buf_offset = 0; vf610_nfc_transfer_size(nfc->regs, 0); vf610_nfc_send_command(nfc->regs, command, READ_ID_CMD_CODE); vf610_nfc_set_field(mtd, NFC_ROW_ADDR, ROW_ADDR_MASK, @@ -421,21 +432,22 @@ static void vf610_nfc_command(struct mtd_info *mtd, unsigned command, case NAND_CMD_STATUS: nfc->alt_buf = ALT_BUF_STAT; vf610_nfc_transfer_size(nfc->regs, 0); - vf610_nfc_send_command(nfc->regs, command, - STATUS_READ_CMD_CODE); + vf610_nfc_send_command(nfc->regs, command, STATUS_READ_CMD_CODE); break; default: return; } vf610_nfc_done(mtd); + + nfc->write_sz = 0; } /* Read data from NFC buffers */ static void vf610_nfc_read_buf(struct mtd_info *mtd, u_char *buf, int len) { struct vf610_nfc *nfc = mtd_to_nfc(mtd); - uint c = nfc->column; + uint c = nfc->buf_offset; /* Alternate buffers are only supported through read_byte */ if (nfc->alt_buf) @@ -443,28 +455,30 @@ static void vf610_nfc_read_buf(struct mtd_info *mtd, u_char *buf, int len) vf610_nfc_memcpy(buf, nfc->regs + NFC_MAIN_AREA(0) + c, len); - nfc->column += len; + nfc->buf_offset += len; } /* Write data to NFC buffers */ -static void vf610_nfc_write_buf(struct mtd_info *mtd, const u_char *buf, +static void vf610_nfc_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) { struct vf610_nfc *nfc = mtd_to_nfc(mtd); - uint c = nfc->column; + uint c = nfc->buf_offset; uint l; - l = min((uint)len, mtd->writesize + mtd->oobsize - c); - nfc->column += l; + l = min_t(uint, len, mtd->writesize + mtd->oobsize - c); vf610_nfc_memcpy(nfc->regs + NFC_MAIN_AREA(0) + c, buf, l); + + nfc->write_sz += l; + nfc->buf_offset += l; } /* Read byte from NFC buffers */ -static u8 vf610_nfc_read_byte(struct mtd_info *mtd) +static uint8_t vf610_nfc_read_byte(struct mtd_info *mtd) { struct vf610_nfc *nfc = mtd_to_nfc(mtd); u8 tmp; - uint c = nfc->column; + uint c = nfc->buf_offset; switch (nfc->alt_buf) { case ALT_BUF_ID: @@ -473,18 +487,17 @@ static u8 vf610_nfc_read_byte(struct mtd_info *mtd) case ALT_BUF_STAT: tmp = vf610_nfc_get_status(mtd); break; - case ALT_BUF_ONFI: #ifdef __LITTLE_ENDIAN + case ALT_BUF_ONFI: /* Reverse byte since the controller uses big endianness */ - c = nfc->column ^ 0x3; - tmp = *((u8 *)(nfc->regs + NFC_MAIN_AREA(0) + c)); - break; + c = nfc->buf_offset ^ 0x3; + /* fall-through */ #endif default: tmp = *((u8 *)(nfc->regs + NFC_MAIN_AREA(0) + c)); break; } - nfc->column++; + nfc->buf_offset++; return tmp; } @@ -492,6 +505,7 @@ static u8 vf610_nfc_read_byte(struct mtd_info *mtd) static u16 vf610_nfc_read_word(struct mtd_info *mtd) { u16 tmp; + vf610_nfc_read_buf(mtd, (u_char *)&tmp, sizeof(tmp)); return tmp; } @@ -511,12 +525,11 @@ static void vf610_nfc_select_chip(struct mtd_info *mtd, int chip) #ifdef CONFIG_VF610 u32 tmp = vf610_nfc_read(mtd, NFC_ROW_ADDR); tmp &= ~(ROW_ADDR_CHIP_SEL_RB_MASK | ROW_ADDR_CHIP_SEL_MASK); - tmp |= 1 << ROW_ADDR_CHIP_SEL_RB_SHIFT; - if (chip == 0) - tmp |= 1 << ROW_ADDR_CHIP_SEL_SHIFT; - else if (chip == 1) - tmp |= 2 << ROW_ADDR_CHIP_SEL_SHIFT; + if (chip >= 0) { + tmp |= 1 << ROW_ADDR_CHIP_SEL_RB_SHIFT; + tmp |= (1 << chip) << ROW_ADDR_CHIP_SEL_SHIFT; + } vf610_nfc_write(mtd, NFC_ROW_ADDR, tmp); #endif @@ -537,52 +550,61 @@ static inline int count_written_bits(uint8_t *buff, int size, int max_bits) return written_bits; } -static inline int vf610_nfc_correct_data(struct mtd_info *mtd, u_char *dat) +static inline int vf610_nfc_correct_data(struct mtd_info *mtd, uint8_t *dat, + uint8_t *oob, int page) { struct vf610_nfc *nfc = mtd_to_nfc(mtd); + u32 ecc_status_off = NFC_MAIN_AREA(0) + ECC_SRAM_ADDR + ECC_STATUS; u8 ecc_status; u8 ecc_count; - int flip; + int flips; + int flips_threshold = nfc->chip.ecc.strength / 2; + + ecc_status = vf610_nfc_read(mtd, ecc_status_off) & 0xff; + ecc_count = ecc_status & ECC_STATUS_ERR_COUNT; - ecc_status = __raw_readb(nfc->regs + ECC_SRAM_ADDR * 8 + ECC_OFFSET); - ecc_count = ecc_status & ECC_ERR_COUNT; if (!(ecc_status & ECC_STATUS_MASK)) return ecc_count; - /* If 'ecc_count' zero or less then buffer is all 0xff or erased. */ - flip = count_written_bits(dat, nfc->chip.ecc.size, ecc_count); + /* Read OOB without ECC unit enabled */ + vf610_nfc_command(mtd, NAND_CMD_READOOB, 0, page); + vf610_nfc_read_buf(mtd, oob, mtd->oobsize); - /* ECC failed. */ - if (flip > ecc_count && flip > (nfc->chip.ecc.strength / 2)) - return -1; + /* + * On an erased page, bit count (including OOB) should be zero or + * at least less then half of the ECC strength. + */ + flips = count_written_bits(dat, nfc->chip.ecc.size, flips_threshold); + flips += count_written_bits(oob, mtd->oobsize, flips_threshold); + + if (unlikely(flips > flips_threshold)) + return -EINVAL; /* Erased page. */ memset(dat, 0xff, nfc->chip.ecc.size); - return 0; + memset(oob, 0xff, mtd->oobsize); + return flips; } - static int vf610_nfc_read_page(struct mtd_info *mtd, struct nand_chip *chip, uint8_t *buf, int oob_required, int page) { int eccsize = chip->ecc.size; int stat; - uint8_t *p = buf; - - - vf610_nfc_read_buf(mtd, p, eccsize); + vf610_nfc_read_buf(mtd, buf, eccsize); if (oob_required) vf610_nfc_read_buf(mtd, chip->oob_poi, mtd->oobsize); - stat = vf610_nfc_correct_data(mtd, p); + stat = vf610_nfc_correct_data(mtd, buf, chip->oob_poi, page); - if (stat < 0) + if (stat < 0) { mtd->ecc_stats.failed++; - else + return 0; + } else { mtd->ecc_stats.corrected += stat; - - return 0; + return stat; + } } /* @@ -591,10 +613,15 @@ static int vf610_nfc_read_page(struct mtd_info *mtd, struct nand_chip *chip, static int vf610_nfc_write_page(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf, int oob_required) { + struct vf610_nfc *nfc = mtd_to_nfc(mtd); + vf610_nfc_write_buf(mtd, buf, mtd->writesize); if (oob_required) vf610_nfc_write_buf(mtd, chip->oob_poi, mtd->oobsize); + /* Always write whole page including OOB due to HW ECC */ + nfc->write_sz = mtd->writesize + mtd->oobsize; + return 0; } @@ -635,12 +662,6 @@ static int vf610_nfc_nand_init(int devnum, void __iomem *addr) if (cfg.width == 16) chip->options |= NAND_BUSWIDTH_16; - /* Use 8-bit mode during initialization */ - vf610_nfc_clear(mtd, NFC_FLASH_CONFIG, CONFIG_16BIT); - - /* Disable subpage writes as we do not provide ecc->hwctl */ - chip->options |= NAND_NO_SUBPAGE_WRITE; - chip->dev_ready = vf610_nfc_dev_ready; chip->cmdfunc = vf610_nfc_command; chip->read_byte = vf610_nfc_read_byte; @@ -649,30 +670,22 @@ static int vf610_nfc_nand_init(int devnum, void __iomem *addr) chip->write_buf = vf610_nfc_write_buf; chip->select_chip = vf610_nfc_select_chip; - /* Bad block options. */ - if (cfg.flash_bbt) - chip->bbt_options = NAND_BBT_USE_FLASH | NAND_BBT_NO_OOB | - NAND_BBT_CREATE; + chip->options |= NAND_NO_SUBPAGE_WRITE; + + chip->ecc.size = PAGE_2K; /* Set configuration register. */ + vf610_nfc_clear(mtd, NFC_FLASH_CONFIG, CONFIG_16BIT); vf610_nfc_clear(mtd, NFC_FLASH_CONFIG, CONFIG_ADDR_AUTO_INCR_BIT); vf610_nfc_clear(mtd, NFC_FLASH_CONFIG, CONFIG_BUFNO_AUTO_INCR_BIT); vf610_nfc_clear(mtd, NFC_FLASH_CONFIG, CONFIG_BOOT_MODE_BIT); vf610_nfc_clear(mtd, NFC_FLASH_CONFIG, CONFIG_DMA_REQ_BIT); vf610_nfc_set(mtd, NFC_FLASH_CONFIG, CONFIG_FAST_FLASH_BIT); - /* Enable Idle IRQ */ - vf610_nfc_set(mtd, NFC_IRQ_STATUS, IDLE_EN_BIT); - - /* PAGE_CNT = 1 */ + /* Disable virtual pages, only one elementary transfer unit */ vf610_nfc_set_field(mtd, NFC_FLASH_CONFIG, CONFIG_PAGE_CNT_MASK, CONFIG_PAGE_CNT_SHIFT, 1); - /* Set ECC_STATUS offset */ - vf610_nfc_set_field(mtd, NFC_FLASH_CONFIG, - CONFIG_ECC_SRAM_ADDR_MASK, - CONFIG_ECC_SRAM_ADDR_SHIFT, ECC_SRAM_ADDR); - /* first scan to find the device and get the page size */ if (nand_scan_ident(mtd, CONFIG_SYS_MAX_NAND_DEVICE, NULL)) { err = -ENXIO; @@ -682,11 +695,14 @@ static int vf610_nfc_nand_init(int devnum, void __iomem *addr) if (cfg.width == 16) vf610_nfc_set(mtd, NFC_FLASH_CONFIG, CONFIG_16BIT); - chip->ecc.mode = NAND_ECC_SOFT; /* default */ + /* Bad block options. */ + if (cfg.flash_bbt) + chip->bbt_options = NAND_BBT_USE_FLASH | NAND_BBT_NO_OOB | + NAND_BBT_CREATE; /* Single buffer only, max 256 OOB minus ECC status */ - if (mtd->writesize + mtd->oobsize > PAGE_2K + 256 - 8) { - dev_err(nfc->dev, "Unsupported flash size\n"); + if (mtd->writesize + mtd->oobsize > PAGE_2K + OOB_MAX - 8) { + dev_err(nfc->dev, "Unsupported flash page size\n"); err = -ENXIO; goto error; } @@ -698,6 +714,13 @@ static int vf610_nfc_nand_init(int devnum, void __iomem *addr) goto error; } + if (chip->ecc.size != mtd->writesize) { + dev_err(nfc->dev, "ecc size: %d\n", chip->ecc.size); + dev_err(nfc->dev, "Step size needs to be page size\n"); + err = -ENXIO; + goto error; + } + /* Current HW ECC layouts only use 64 bytes of OOB */ if (mtd->oobsize > 64) mtd->oobsize = 64; @@ -718,7 +741,13 @@ static int vf610_nfc_nand_init(int devnum, void __iomem *addr) chip->ecc.bytes = 60; #endif - /* Enable ECC_STATUS */ + /* Set ECC_STATUS offset */ + vf610_nfc_set_field(mtd, NFC_FLASH_CONFIG, + CONFIG_ECC_SRAM_ADDR_MASK, + CONFIG_ECC_SRAM_ADDR_SHIFT, + ECC_SRAM_ADDR >> 3); + + /* Enable ECC status in SRAM */ vf610_nfc_set(mtd, NFC_FLASH_CONFIG, CONFIG_ECC_SRAM_REQ_BIT); } |