diff options
author | Konstantin Porotchkin <kostap@marvell.com> | 2017-03-28 15:16:54 (GMT) |
---|---|---|
committer | Stefan Roese <sr@denx.de> | 2017-05-09 11:38:18 (GMT) |
commit | 1d45329ada8e9732600982f404fd06e7170f4843 (patch) | |
tree | fd132024ae7c0af6ff311c27b51bf24193cb91e0 /drivers/mtd/nand | |
parent | ae07a70ac2e23357a99b5ccc3282ca60ca353572 (diff) | |
download | u-boot-1d45329ada8e9732600982f404fd06e7170f4843.tar.xz |
fix: nand: pxa3xx: Remove hardcode values from the driver
Obtain NAND controller setup parameters from the device
tree instead of using hardcoded values.
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Cc: Scott Wood <oss@buserror.net>
Cc: Stefan Roese <sr@denx.de>
Cc: Igal Liberman <igall@marvell.com>
Cc: Nadav Haklai <nadavh@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'drivers/mtd/nand')
-rw-r--r-- | drivers/mtd/nand/pxa3xx_nand.c | 62 |
1 files changed, 54 insertions, 8 deletions
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index dfe8966..0042a7b 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -9,6 +9,7 @@ #include <common.h> #include <malloc.h> +#include <fdtdec.h> #include <nand.h> #include <linux/errno.h> #include <asm/io.h> @@ -19,6 +20,8 @@ #include "pxa3xx_nand.h" +DECLARE_GLOBAL_DATA_PTR; + #define TIMEOUT_DRAIN_FIFO 5 /* in ms */ #define CHIP_DELAY_TIMEOUT 200 #define NAND_STOP_DELAY 40 @@ -1510,8 +1513,6 @@ static int alloc_nand_resource(struct pxa3xx_nand_info *info) chip->cmdfunc = nand_cmdfunc; } - info->mmio_base = (void __iomem *)MVEBU_NAND_BASE; - /* Allocate a buffer to allow flash detection */ info->buf_size = INIT_BUFFER_SIZE; info->data_buff = kmalloc(info->buf_size, GFP_KERNEL); @@ -1533,17 +1534,62 @@ fail_disable_clk: static int pxa3xx_nand_probe_dt(struct pxa3xx_nand_info *info) { struct pxa3xx_nand_platform_data *pdata; + const void *blob = gd->fdt_blob; + int node = -1; pdata = kzalloc(sizeof(*pdata), GFP_KERNEL); if (!pdata) return -ENOMEM; - pdata->enable_arbiter = 1; - pdata->num_cs = 1; + /* Get address decoding nodes from the FDT blob */ + do { + node = fdt_node_offset_by_compatible(blob, node, + "marvell,mvebu-pxa3xx-nand"); + if (node < 0) + break; + + /* Bypass disabeld nodes */ + if (!fdtdec_get_is_enabled(blob, node)) + continue; - info->pdata = pdata; + /* Get the first enabled NAND controler base address */ + info->mmio_base = + (void __iomem *)fdtdec_get_addr_size_auto_noparent( + blob, node, "reg", 0, NULL, true); - return 0; + pdata->num_cs = fdtdec_get_int(blob, node, "num-cs", 1); + if (pdata->num_cs != 1) { + error("pxa3xx driver supports single CS only\n"); + break; + } + + if (fdtdec_get_bool(blob, node, "nand-enable-arbiter")) + pdata->enable_arbiter = 1; + + if (fdtdec_get_bool(blob, node, "nand-keep-config")) + pdata->keep_config = 1; + + /* + * ECC parameters. + * If these are not set, they will be selected according + * to the detected flash type. + */ + /* ECC strength */ + pdata->ecc_strength = fdtdec_get_int(blob, node, + "nand-ecc-strength", 0); + + /* ECC step size */ + pdata->ecc_step_size = fdtdec_get_int(blob, node, + "nand-ecc-step-size", 0); + + info->pdata = pdata; + + /* Currently support only a single NAND controller */ + return 0; + + } while (node >= 0); + + return -EINVAL; } static int pxa3xx_nand_probe(struct pxa3xx_nand_info *info) @@ -1603,8 +1649,8 @@ void board_nand_init(void) int ret; info = kzalloc(sizeof(*info) + - sizeof(*host) * CONFIG_SYS_MAX_NAND_DEVICE, - GFP_KERNEL); + sizeof(*host) * CONFIG_SYS_MAX_NAND_DEVICE, + GFP_KERNEL); if (!info) return; |