diff options
author | Masahiro Yamada <yamada.masahiro@socionext.com> | 2017-04-14 01:55:00 (GMT) |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2017-04-18 14:29:14 (GMT) |
commit | 90d6500c0f90dd6e9aa770a5d8faf88bb34440ea (patch) | |
tree | f407985ab392e84d073e7558c03b45cf3ffc6bbc /drivers/mtd/nand | |
parent | 4326b454744b47777f6575d62e84622d941da5ea (diff) | |
download | u-boot-90d6500c0f90dd6e9aa770a5d8faf88bb34440ea.tar.xz |
drivers: remove Blackfin specific drivers
These drivers have no user since commit ea3310e8aafa ("Blackfin:
Remove").
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Diffstat (limited to 'drivers/mtd/nand')
-rw-r--r-- | drivers/mtd/nand/Makefile | 1 | ||||
-rw-r--r-- | drivers/mtd/nand/bfin_nand.c | 394 |
2 files changed, 0 insertions, 395 deletions
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index fd4bb66..82358f6 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -42,7 +42,6 @@ obj-$(CONFIG_NAND_ECC_BCH) += nand_bch.o obj-$(CONFIG_NAND_ATMEL) += atmel_nand.o obj-$(CONFIG_NAND_ARASAN) += arasan_nfc.o -obj-$(CONFIG_DRIVER_NAND_BFIN) += bfin_nand.o obj-$(CONFIG_NAND_DAVINCI) += davinci_nand.o obj-$(CONFIG_NAND_DENALI) += denali.o obj-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_nand.o diff --git a/drivers/mtd/nand/bfin_nand.c b/drivers/mtd/nand/bfin_nand.c deleted file mode 100644 index 7c11868..0000000 --- a/drivers/mtd/nand/bfin_nand.c +++ /dev/null @@ -1,394 +0,0 @@ -/* - * Driver for Blackfin on-chip NAND controller. - * - * Enter bugs at http://blackfin.uclinux.org/ - * - * Copyright (c) 2007-2008 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -/* TODO: - * - move bit defines into mach-common/bits/nand.h - * - try and replace all IRQSTAT usage with STAT polling - * - have software ecc mode use same algo as hw ecc ? - */ - -#include <common.h> -#include <console.h> -#include <asm/io.h> - -#ifdef DEBUG -# define pr_stamp() printf("%s:%s:%i: here i am\n", __FILE__, __func__, __LINE__) -#else -# define pr_stamp() -#endif - -#include <nand.h> - -#include <asm/blackfin.h> -#include <asm/portmux.h> - -/* Bit masks for NFC_CTL */ - -#define WR_DLY 0xf /* Write Strobe Delay */ -#define RD_DLY 0xf0 /* Read Strobe Delay */ -#define NWIDTH 0x100 /* NAND Data Width */ -#define PG_SIZE 0x200 /* Page Size */ - -/* Bit masks for NFC_STAT */ - -#define NBUSY 0x1 /* Not Busy */ -#define WB_FULL 0x2 /* Write Buffer Full */ -#define PG_WR_STAT 0x4 /* Page Write Pending */ -#define PG_RD_STAT 0x8 /* Page Read Pending */ -#define WB_EMPTY 0x10 /* Write Buffer Empty */ - -/* Bit masks for NFC_IRQSTAT */ - -#define NBUSYIRQ 0x1 /* Not Busy IRQ */ -#define WB_OVF 0x2 /* Write Buffer Overflow */ -#define WB_EDGE 0x4 /* Write Buffer Edge Detect */ -#define RD_RDY 0x8 /* Read Data Ready */ -#define WR_DONE 0x10 /* Page Write Done */ - -#define NAND_IS_512() (CONFIG_BFIN_NFC_CTL_VAL & 0x200) - -/* - * hardware specific access to control-lines - */ -static void bfin_nfc_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) -{ - pr_stamp(); - - if (cmd == NAND_CMD_NONE) - return; - - while (bfin_read_NFC_STAT() & WB_FULL) - continue; - - if (ctrl & NAND_CLE) - bfin_write_NFC_CMD(cmd); - else - bfin_write_NFC_ADDR(cmd); - SSYNC(); -} - -static int bfin_nfc_devready(struct mtd_info *mtd) -{ - pr_stamp(); - return (bfin_read_NFC_STAT() & NBUSY) ? 1 : 0; -} - -/* - * PIO mode for buffer writing and reading - */ -static void bfin_nfc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) -{ - pr_stamp(); - - int i; - - /* - * Data reads are requested by first writing to NFC_DATA_RD - * and then reading back from NFC_READ. - */ - for (i = 0; i < len; ++i) { - while (bfin_read_NFC_STAT() & WB_FULL) - if (ctrlc()) - return; - - /* Contents do not matter */ - bfin_write_NFC_DATA_RD(0x0000); - SSYNC(); - - while (!(bfin_read_NFC_IRQSTAT() & RD_RDY)) - if (ctrlc()) - return; - - buf[i] = bfin_read_NFC_READ(); - - bfin_write_NFC_IRQSTAT(RD_RDY); - } -} - -static uint8_t bfin_nfc_read_byte(struct mtd_info *mtd) -{ - pr_stamp(); - - uint8_t val; - bfin_nfc_read_buf(mtd, &val, 1); - return val; -} - -static void bfin_nfc_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) -{ - pr_stamp(); - - int i; - - for (i = 0; i < len; ++i) { - while (bfin_read_NFC_STAT() & WB_FULL) - if (ctrlc()) - return; - - bfin_write_NFC_DATA_WR(buf[i]); - } - - /* Wait for the buffer to drain before we return */ - while (!(bfin_read_NFC_STAT() & WB_EMPTY)) - if (ctrlc()) - return; -} - -/* - * ECC functions - * These allow the bfin to use the controller's ECC - * generator block to ECC the data as it passes through - */ - -/* - * ECC error correction function - */ -static int bfin_nfc_correct_data_256(struct mtd_info *mtd, u_char *dat, - u_char *read_ecc, u_char *calc_ecc) -{ - u32 syndrome[5]; - u32 calced, stored; - unsigned short failing_bit, failing_byte; - u_char data; - - pr_stamp(); - - calced = calc_ecc[0] | (calc_ecc[1] << 8) | (calc_ecc[2] << 16); - stored = read_ecc[0] | (read_ecc[1] << 8) | (read_ecc[2] << 16); - - syndrome[0] = (calced ^ stored); - - /* - * syndrome 0: all zero - * No error in data - * No action - */ - if (!syndrome[0] || !calced || !stored) - return 0; - - /* - * sysdrome 0: only one bit is one - * ECC data was incorrect - * No action - */ - if (hweight32(syndrome[0]) == 1) - return 1; - - syndrome[1] = (calced & 0x7FF) ^ (stored & 0x7FF); - syndrome[2] = (calced & 0x7FF) ^ ((calced >> 11) & 0x7FF); - syndrome[3] = (stored & 0x7FF) ^ ((stored >> 11) & 0x7FF); - syndrome[4] = syndrome[2] ^ syndrome[3]; - - /* - * sysdrome 0: exactly 11 bits are one, each parity - * and parity' pair is 1 & 0 or 0 & 1. - * 1-bit correctable error - * Correct the error - */ - if (hweight32(syndrome[0]) == 11 && syndrome[4] == 0x7FF) { - failing_bit = syndrome[1] & 0x7; - failing_byte = syndrome[1] >> 0x3; - data = *(dat + failing_byte); - data = data ^ (0x1 << failing_bit); - *(dat + failing_byte) = data; - - return 0; - } - - /* - * sysdrome 0: random data - * More than 1-bit error, non-correctable error - * Discard data, mark bad block - */ - - return 1; -} - -static int bfin_nfc_correct_data(struct mtd_info *mtd, u_char *dat, - u_char *read_ecc, u_char *calc_ecc) -{ - int ret; - - pr_stamp(); - - ret = bfin_nfc_correct_data_256(mtd, dat, read_ecc, calc_ecc); - - /* If page size is 512, correct second 256 bytes */ - if (NAND_IS_512()) { - dat += 256; - read_ecc += 8; - calc_ecc += 8; - ret |= bfin_nfc_correct_data_256(mtd, dat, read_ecc, calc_ecc); - } - - return ret; -} - -static void reset_ecc(void) -{ - bfin_write_NFC_RST(0x1); - while (bfin_read_NFC_RST() & 1) - continue; -} - -static void bfin_nfc_enable_hwecc(struct mtd_info *mtd, int mode) -{ - reset_ecc(); -} - -static int bfin_nfc_calculate_ecc(struct mtd_info *mtd, - const u_char *dat, u_char *ecc_code) -{ - u16 ecc0, ecc1; - u32 code[2]; - u8 *p; - - pr_stamp(); - - /* first 4 bytes ECC code for 256 page size */ - ecc0 = bfin_read_NFC_ECC0(); - ecc1 = bfin_read_NFC_ECC1(); - - code[0] = (ecc0 & 0x7FF) | ((ecc1 & 0x7FF) << 11); - - /* first 3 bytes in ecc_code for 256 page size */ - p = (u8 *) code; - memcpy(ecc_code, p, 3); - - /* second 4 bytes ECC code for 512 page size */ - if (NAND_IS_512()) { - ecc0 = bfin_read_NFC_ECC2(); - ecc1 = bfin_read_NFC_ECC3(); - code[1] = (ecc0 & 0x7FF) | ((ecc1 & 0x7FF) << 11); - - /* second 3 bytes in ecc_code for second 256 - * bytes of 512 page size - */ - p = (u8 *) (code + 1); - memcpy((ecc_code + 3), p, 3); - } - - reset_ecc(); - - return 0; -} - -#ifdef CONFIG_BFIN_NFC_BOOTROM_ECC -# define BOOTROM_ECC 1 -#else -# define BOOTROM_ECC 0 -#endif - -static uint8_t bbt_pattern[] = { 0xff }; - -static struct nand_bbt_descr bootrom_bbt = { - .options = 0, - .offs = 63, - .len = 1, - .pattern = bbt_pattern, -}; - -static struct nand_ecclayout bootrom_ecclayout = { - .eccbytes = 24, - .eccpos = { - 0x8 * 0, 0x8 * 0 + 1, 0x8 * 0 + 2, - 0x8 * 1, 0x8 * 1 + 1, 0x8 * 1 + 2, - 0x8 * 2, 0x8 * 2 + 1, 0x8 * 2 + 2, - 0x8 * 3, 0x8 * 3 + 1, 0x8 * 3 + 2, - 0x8 * 4, 0x8 * 4 + 1, 0x8 * 4 + 2, - 0x8 * 5, 0x8 * 5 + 1, 0x8 * 5 + 2, - 0x8 * 6, 0x8 * 6 + 1, 0x8 * 6 + 2, - 0x8 * 7, 0x8 * 7 + 1, 0x8 * 7 + 2 - }, - .oobfree = { - { 0x8 * 0 + 3, 5 }, - { 0x8 * 1 + 3, 5 }, - { 0x8 * 2 + 3, 5 }, - { 0x8 * 3 + 3, 5 }, - { 0x8 * 4 + 3, 5 }, - { 0x8 * 5 + 3, 5 }, - { 0x8 * 6 + 3, 5 }, - { 0x8 * 7 + 3, 5 }, - } -}; - -/* - * Board-specific NAND initialization. The following members of the - * argument are board-specific (per include/linux/mtd/nand.h): - * - IO_ADDR_R?: address to read the 8 I/O lines of the flash device - * - IO_ADDR_W?: address to write the 8 I/O lines of the flash device - * - cmd_ctrl: hardwarespecific function for accesing control-lines - * - dev_ready: hardwarespecific function for accesing device ready/busy line - * - enable_hwecc?: function to enable (reset) hardware ecc generator. Must - * only be provided if a hardware ECC is available - * - ecc.mode: mode of ecc, see defines - * - chip_delay: chip dependent delay for transfering data from array to - * read regs (tR) - * - options: various chip options. They can partly be set to inform - * nand_scan about special functionality. See the defines for further - * explanation - * Members with a "?" were not set in the merged testing-NAND branch, - * so they are not set here either. - */ -int board_nand_init(struct nand_chip *chip) -{ - const unsigned short pins[] = { - P_NAND_CE, P_NAND_RB, P_NAND_D0, P_NAND_D1, P_NAND_D2, - P_NAND_D3, P_NAND_D4, P_NAND_D5, P_NAND_D6, P_NAND_D7, - P_NAND_WE, P_NAND_RE, P_NAND_CLE, P_NAND_ALE, 0, - }; - - pr_stamp(); - - /* set width/ecc/timings/etc... */ - bfin_write_NFC_CTL(CONFIG_BFIN_NFC_CTL_VAL); - - /* clear interrupt status */ - bfin_write_NFC_IRQMASK(0x0); - bfin_write_NFC_IRQSTAT(0xffff); - - /* enable GPIO function enable register */ - peripheral_request_list(pins, "bfin_nand"); - - chip->cmd_ctrl = bfin_nfc_cmd_ctrl; - chip->read_buf = bfin_nfc_read_buf; - chip->write_buf = bfin_nfc_write_buf; - chip->read_byte = bfin_nfc_read_byte; - -#ifdef CONFIG_BFIN_NFC_NO_HW_ECC -# define ECC_HW 0 -#else -# define ECC_HW 1 -#endif - if (ECC_HW) { - if (BOOTROM_ECC) { - chip->badblock_pattern = &bootrom_bbt; - chip->ecc.layout = &bootrom_ecclayout; - } - if (!NAND_IS_512()) { - chip->ecc.bytes = 3; - chip->ecc.size = 256; - chip->ecc.strength = 1; - } else { - chip->ecc.bytes = 6; - chip->ecc.size = 512; - chip->ecc.strength = 2; - } - chip->ecc.mode = NAND_ECC_HW; - chip->ecc.calculate = bfin_nfc_calculate_ecc; - chip->ecc.correct = bfin_nfc_correct_data; - chip->ecc.hwctl = bfin_nfc_enable_hwecc; - } else - chip->ecc.mode = NAND_ECC_SOFT; - chip->dev_ready = bfin_nfc_devready; - chip->chip_delay = 0; - - return 0; -} |