diff options
author | Haiying Wang <Haiying.Wang@freescale.com> | 2008-09-24 16:42:12 (GMT) |
---|---|---|
committer | Wolfgang Denk <wd@denx.de> | 2008-10-18 19:54:00 (GMT) |
commit | 41410eee472b0f42e03a77f961bbc55ef58f3c01 (patch) | |
tree | 696428e03aefc4030f0623d278f2d21b59f36f16 /drivers/qe/uec_phy.c | |
parent | 69710092172409cfcc43b84cd71287f428a4e319 (diff) | |
download | u-boot-41410eee472b0f42e03a77f961bbc55ef58f3c01.tar.xz |
Change UEC PHY interface to RGMII on MPC8568MDS
Change UEC phy interface from GMII to RGMII on MPC8568MDS board
Because on MPC8568MDS, GMII interface is only recommended for 1000Mbps speed,
but RGMII interface can work at 10/100/1000Mbps, and RGMII interface works more stable.
Now both UEC1 and UEC2 can work properly under u-boot.
It is also in consistent with the kernel setting for 8568 UEC phy interface.
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Diffstat (limited to 'drivers/qe/uec_phy.c')
-rw-r--r-- | drivers/qe/uec_phy.c | 24 |
1 files changed, 24 insertions, 0 deletions
diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c index 186922e..2243d3b 100644 --- a/drivers/qe/uec_phy.c +++ b/drivers/qe/uec_phy.c @@ -376,6 +376,29 @@ static int bcm_init(struct uec_mii_info *mii_info) return 0; } +static int marvell_init(struct uec_mii_info *mii_info) +{ + struct eth_device *edev = mii_info->dev; + uec_private_t *uec = edev->priv; + + if (uec->uec_info->enet_interface == ENET_1000_RGMII_ID) { + int temp; + + temp = phy_read(mii_info, MII_M1111_PHY_EXT_CR); + temp |= (MII_M1111_RX_DELAY | MII_M1111_TX_DELAY); + phy_write(mii_info, MII_M1111_PHY_EXT_CR, temp); + + temp = phy_read(mii_info, MII_M1111_PHY_EXT_SR); + temp &= ~MII_M1111_HWCFG_MODE_MASK; + temp |= MII_M1111_HWCFG_MODE_RGMII; + phy_write(mii_info, MII_M1111_PHY_EXT_SR, temp); + + phy_write(mii_info, PHY_BMCR, PHY_BMCR_RESET); + } + + return 0; +} + static int marvell_read_status (struct uec_mii_info *mii_info) { u16 status; @@ -538,6 +561,7 @@ static struct phy_info phy_info_marvell = { .phy_id_mask = 0xffffff00, .name = "Marvell 88E11x1", .features = MII_GBIT_FEATURES, + .init = &marvell_init, .config_aneg = &marvell_config_aneg, .read_status = &marvell_read_status, .ack_interrupt = &marvell_ack_interrupt, |