diff options
| author | Heiko Schocher <hs@denx.de> | 2017-01-18 07:05:49 (GMT) |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2017-01-20 14:15:19 (GMT) |
| commit | 17fa032671f7981628fe16b30399638842a4b1bb (patch) | |
| tree | 473870132e1d52495cf5e149aa914f69b7e59709 /drivers/serial | |
| parent | 0675f992dbf4a785a05a1baf149c2bce6aa5fe90 (diff) | |
| download | u-boot-17fa032671f7981628fe16b30399638842a4b1bb.tar.xz | |
serial, ns16550: bugfix: ns16550 fifo not enabled
commit: 65f83802b7a5b "serial: 16550: Add getfcr accessor"
breaks u-boot commandline working with long commands
sending to the board.
Since the above patch, you have to setup the fcr register.
For board/archs which enable OF_PLATDATA, the new field
fcr in struct ns16550_platdata is not filled with a
default value ...
This leads in not setting up the uarts fifo, which ends
in problems, when you send long commands to u-boots
commandline.
Detected this issue with automated tbot tests on am335x
based shc board.
The error does not popup, if you type commands. You need
to copy&paste a long command to u-boots commandshell
(or send a long command with tbot)
Possible boards/plattforms with problems:
./arch/arm/cpu/arm926ejs/lpc32xx/devices.c
./arch/arm/mach-tegra/board.c
./board/overo/overo.c
./board/quipos/cairo/cairo.c
./board/logicpd/omap3som/omap3logic.c
./board/logicpd/zoom1/zoom1.c
./board/timll/devkit8000/devkit8000.c
./board/lg/sniper/sniper.c
./board/ti/beagle/beagle.c
./drivers/serial/serial_rockchip.c
Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Tested-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Diffstat (limited to 'drivers/serial')
| -rw-r--r-- | drivers/serial/ns16550.c | 9 | ||||
| -rw-r--r-- | drivers/serial/serial_rockchip.c | 1 |
2 files changed, 4 insertions, 6 deletions
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c index 9b423a5..2df4a1f 100644 --- a/drivers/serial/ns16550.c +++ b/drivers/serial/ns16550.c @@ -20,9 +20,6 @@ DECLARE_GLOBAL_DATA_PTR; #define UART_LCRVAL UART_LCR_8N1 /* 8 data, 1 stop, no parity */ #define UART_MCRVAL (UART_MCR_DTR | \ UART_MCR_RTS) /* RTS/DTR */ -#define UART_FCRVAL (UART_FCR_FIFO_EN | \ - UART_FCR_RXSR | \ - UART_FCR_TXSR) /* Clear & enable FIFOs */ #ifndef CONFIG_DM_SERIAL #ifdef CONFIG_SYS_NS16550_PORT_MAPPED @@ -138,7 +135,7 @@ static u32 ns16550_getfcr(NS16550_t port) #else static u32 ns16550_getfcr(NS16550_t port) { - return UART_FCRVAL; + return UART_FCR_DEFVAL; } #endif @@ -275,7 +272,7 @@ static inline void _debug_uart_init(void) CONFIG_BAUDRATE); serial_dout(&com_port->ier, CONFIG_SYS_NS16550_IER); serial_dout(&com_port->mcr, UART_MCRVAL); - serial_dout(&com_port->fcr, UART_FCRVAL); + serial_dout(&com_port->fcr, UART_FCR_DEFVAL); serial_dout(&com_port->lcr, UART_LCR_BKSE | UART_LCRVAL); serial_dout(&com_port->dll, baud_divisor & 0xff); @@ -440,7 +437,7 @@ int ns16550_serial_ofdata_to_platdata(struct udevice *dev) return -EINVAL; } - plat->fcr = UART_FCRVAL; + plat->fcr = UART_FCR_DEFVAL; if (port_type == PORT_JZ4780) plat->fcr |= UART_FCR_UME; diff --git a/drivers/serial/serial_rockchip.c b/drivers/serial/serial_rockchip.c index 6bac95a..c06afc5 100644 --- a/drivers/serial/serial_rockchip.c +++ b/drivers/serial/serial_rockchip.c @@ -27,6 +27,7 @@ static int rockchip_serial_probe(struct udevice *dev) plat->plat.base = plat->dtplat.reg[0]; plat->plat.reg_shift = plat->dtplat.reg_shift; plat->plat.clock = plat->dtplat.clock_frequency; + plat->plat.fcr = UART_FCR_DEFVAL; dev->platdata = &plat->plat; return ns16550_serial_probe(dev); |