diff options
author | Lucas Stach <dev@lynxeye.de> | 2012-09-25 22:14:35 (GMT) |
---|---|---|
committer | Tom Rini <trini@ti.com> | 2012-10-15 18:54:00 (GMT) |
commit | 676ae068d9af8c4848dc8f3a66d65e2bff066239 (patch) | |
tree | 1749db469181d5b5e3ec52bddf0bc669c773fb7e /drivers/usb/host/ehci-mpc512x.c | |
parent | c7e3b2b58636704d504ac270031d87b716d8b273 (diff) | |
download | u-boot-676ae068d9af8c4848dc8f3a66d65e2bff066239.tar.xz |
usb: ehci: rework to take advantage of new lowlevel interface
Kill off ehci-core.h
It was used to specify some static controller data. To support more than
one controller being active at any time we have to carry the controller
data ourselfes. Change the ehci interface accordingly.
NOTE: OMAP implemented the ehci stuff a bit backwards and should be fixed
to do the same thing as other platforms. But the change for now is at least
compile clean.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Diffstat (limited to 'drivers/usb/host/ehci-mpc512x.c')
-rw-r--r-- | drivers/usb/host/ehci-mpc512x.c | 25 |
1 files changed, 9 insertions, 16 deletions
diff --git a/drivers/usb/host/ehci-mpc512x.c b/drivers/usb/host/ehci-mpc512x.c index d360108..e98f79f 100644 --- a/drivers/usb/host/ehci-mpc512x.c +++ b/drivers/usb/host/ehci-mpc512x.c @@ -33,7 +33,6 @@ #include <usb/ehci-fsl.h> #include "ehci.h" -#include "ehci-core.h" static void fsl_setup_phy(volatile struct ehci_hcor *); static void fsl_platform_set_host_mode(volatile struct usb_ehci *ehci); @@ -46,21 +45,21 @@ static void usb_platform_dr_init(volatile struct usb_ehci *ehci); * This code is derived from EHCI FSL USB Linux driver for MPC5121 * */ -int ehci_hcd_init(void) +int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor) { volatile struct usb_ehci *ehci; /* Hook the memory mapped registers for EHCI-Controller */ ehci = (struct usb_ehci *)CONFIG_SYS_FSL_USB_ADDR; - hccr = (struct ehci_hccr *)((uint32_t)&(ehci->caplength)); - hcor = (struct ehci_hcor *)((uint32_t) hccr + - HC_LENGTH(ehci_readl(&hccr->cr_capbase))); + *hccr = (struct ehci_hccr *)((uint32_t)&(ehci->caplength)); + *hcor = (struct ehci_hcor *)((uint32_t) *hccr + + HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase))); /* configure interface for UTMI_WIDE */ usb_platform_dr_init(ehci); /* Init Phy USB0 to UTMI+ */ - fsl_setup_phy(hcor); + fsl_setup_phy(*hcor); /* Set to host mode */ fsl_platform_set_host_mode(ehci); @@ -89,20 +88,14 @@ int ehci_hcd_init(void) * Destroy the appropriate control structures corresponding * the the EHCI host controller. */ -int ehci_hcd_stop(void) +int ehci_hcd_stop(int index) { volatile struct usb_ehci *ehci; int exit_status = 0; - if (hcor) { - /* Unhook struct */ - hccr = NULL; - hcor = NULL; - - /* Reset the USB controller */ - ehci = (struct usb_ehci *)CONFIG_SYS_FSL_USB_ADDR; - exit_status = reset_usb_controller(ehci); - } + /* Reset the USB controller */ + ehci = (struct usb_ehci *)CONFIG_SYS_FSL_USB_ADDR; + exit_status = reset_usb_controller(ehci); return exit_status; } |