diff options
author | Ramneek Mehresh <ramneek.mehresh@freescale.com> | 2015-05-29 09:17:17 (GMT) |
---|---|---|
committer | Marek Vasut <marex@denx.de> | 2015-07-22 06:55:44 (GMT) |
commit | 2770448c8cd440a29619e9daa99484a0e5a6fad7 (patch) | |
tree | 252486d0d56077acd3d012c0407053b58ec7a583 /drivers/usb/host | |
parent | 552d60cc222f649b762b3adb9b5f1d681ccd062a (diff) | |
download | u-boot-2770448c8cd440a29619e9daa99484a0e5a6fad7.tar.xz |
usb: xhci: omap: Remove common dwc3 drv functions calls
Remove all redundant dwc3 driver function calls that
are defined by dwc3 driver
Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
Diffstat (limited to 'drivers/usb/host')
-rw-r--r-- | drivers/usb/host/xhci-omap.c | 60 |
1 files changed, 0 insertions, 60 deletions
diff --git a/drivers/usb/host/xhci-omap.c b/drivers/usb/host/xhci-omap.c index 912b2bd..3a55208 100644 --- a/drivers/usb/host/xhci-omap.c +++ b/drivers/usb/host/xhci-omap.c @@ -34,66 +34,6 @@ inline int __board_usb_init(int index, enum usb_init_type init) int board_usb_init(int index, enum usb_init_type init) __attribute__((weak, alias("__board_usb_init"))); -static void dwc3_set_mode(struct dwc3 *dwc3_reg, u32 mode) -{ - clrsetbits_le32(&dwc3_reg->g_ctl, - DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG), - DWC3_GCTL_PRTCAPDIR(mode)); -} - -static void dwc3_core_soft_reset(struct dwc3 *dwc3_reg) -{ - /* Before Resetting PHY, put Core in Reset */ - setbits_le32(&dwc3_reg->g_ctl, DWC3_GCTL_CORESOFTRESET); - - omap_reset_usb_phy(dwc3_reg); - - /* After PHYs are stable we can take Core out of reset state */ - clrbits_le32(&dwc3_reg->g_ctl, DWC3_GCTL_CORESOFTRESET); -} - -static int dwc3_core_init(struct dwc3 *dwc3_reg) -{ - u32 reg; - u32 revision; - unsigned int dwc3_hwparams1; - - revision = readl(&dwc3_reg->g_snpsid); - /* This should read as U3 followed by revision number */ - if ((revision & DWC3_GSNPSID_MASK) != 0x55330000) { - puts("this is not a DesignWare USB3 DRD Core\n"); - return -1; - } - - dwc3_core_soft_reset(dwc3_reg); - - dwc3_hwparams1 = readl(&dwc3_reg->g_hwparams1); - - reg = readl(&dwc3_reg->g_ctl); - reg &= ~DWC3_GCTL_SCALEDOWN_MASK; - reg &= ~DWC3_GCTL_DISSCRAMBLE; - switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc3_hwparams1)) { - case DWC3_GHWPARAMS1_EN_PWROPT_CLK: - reg &= ~DWC3_GCTL_DSBLCLKGTNG; - break; - default: - debug("No power optimization available\n"); - } - - /* - * WORKAROUND: DWC3 revisions <1.90a have a bug - * where the device can fail to connect at SuperSpeed - * and falls back to high-speed mode which causes - * the device to enter a Connect/Disconnect loop - */ - if ((revision & DWC3_REVISION_MASK) < 0x190a) - reg |= DWC3_GCTL_U2RSTECN; - - writel(reg, &dwc3_reg->g_ctl); - - return 0; -} - static int omap_xhci_core_init(struct omap_xhci *omap) { int ret = 0; |