diff options
author | Ramneek Mehresh <ramneek.mehresh@freescale.com> | 2015-05-29 09:17:15 (GMT) |
---|---|---|
committer | Marek Vasut <marex@denx.de> | 2015-07-22 06:55:44 (GMT) |
commit | dc9cdf859e11de775e75cc233b09d6b6d257a818 (patch) | |
tree | 6aa764dabf751fac8e3e57fc911e0a4821a52751 /drivers/usb/host | |
parent | b217c89e8565ade3aaa9f74c33c93236bf151187 (diff) | |
download | u-boot-dc9cdf859e11de775e75cc233b09d6b6d257a818.tar.xz |
usb: dwc3: Add DWC3 controller driver support
Add support for DWC3 XHCI controller driver
Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
Diffstat (limited to 'drivers/usb/host')
-rw-r--r-- | drivers/usb/host/Makefile | 1 | ||||
-rw-r--r-- | drivers/usb/host/xhci-dwc3.c | 91 |
2 files changed, 92 insertions, 0 deletions
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 4d35d3e..310d979 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -51,6 +51,7 @@ obj-$(CONFIG_USB_EHCI_ZYNQ) += ehci-zynq.o # xhci obj-$(CONFIG_USB_XHCI) += xhci.o xhci-mem.o xhci-ring.o +obj-$(CONFIG_USB_XHCI_DWC3) += xhci-dwc3.o obj-$(CONFIG_USB_XHCI_KEYSTONE) += xhci-keystone.o obj-$(CONFIG_USB_XHCI_EXYNOS) += xhci-exynos5.o obj-$(CONFIG_USB_XHCI_OMAP) += xhci-omap.o diff --git a/drivers/usb/host/xhci-dwc3.c b/drivers/usb/host/xhci-dwc3.c new file mode 100644 index 0000000..67147cb --- /dev/null +++ b/drivers/usb/host/xhci-dwc3.c @@ -0,0 +1,91 @@ +/* + * Copyright 2015 Freescale Semiconductor, Inc. + * + * DWC3 controller driver + * + * Author: Ramneek Mehresh<ramneek.mehresh@freescale.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <linux/usb/dwc3.h> + +void dwc3_set_mode(struct dwc3 *dwc3_reg, u32 mode) +{ + clrsetbits_le32(&dwc3_reg->g_ctl, + DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG), + DWC3_GCTL_PRTCAPDIR(mode)); +} + +void dwc3_phy_reset(struct dwc3 *dwc3_reg) +{ + /* Assert USB3 PHY reset */ + setbits_le32(&dwc3_reg->g_usb3pipectl[0], DWC3_GUSB3PIPECTL_PHYSOFTRST); + + /* Assert USB2 PHY reset */ + setbits_le32(&dwc3_reg->g_usb2phycfg, DWC3_GUSB2PHYCFG_PHYSOFTRST); + + mdelay(100); + + /* Clear USB3 PHY reset */ + clrbits_le32(&dwc3_reg->g_usb3pipectl[0], DWC3_GUSB3PIPECTL_PHYSOFTRST); + + /* Clear USB2 PHY reset */ + clrbits_le32(&dwc3_reg->g_usb2phycfg, DWC3_GUSB2PHYCFG_PHYSOFTRST); +} + +void dwc3_core_soft_reset(struct dwc3 *dwc3_reg) +{ + /* Before Resetting PHY, put Core in Reset */ + setbits_le32(&dwc3_reg->g_ctl, DWC3_GCTL_CORESOFTRESET); + + /* reset USB3 phy - if required */ + dwc3_phy_reset(dwc3_reg); + + /* After PHYs are stable we can take Core out of reset state */ + clrbits_le32(&dwc3_reg->g_ctl, DWC3_GCTL_CORESOFTRESET); +} + +int dwc3_core_init(struct dwc3 *dwc3_reg) +{ + u32 reg; + u32 revision; + unsigned int dwc3_hwparams1; + + revision = readl(&dwc3_reg->g_snpsid); + /* This should read as U3 followed by revision number */ + if ((revision & DWC3_GSNPSID_MASK) != 0x55330000) { + puts("this is not a DesignWare USB3 DRD Core\n"); + return -1; + } + + dwc3_core_soft_reset(dwc3_reg); + + dwc3_hwparams1 = readl(&dwc3_reg->g_hwparams1); + + reg = readl(&dwc3_reg->g_ctl); + reg &= ~DWC3_GCTL_SCALEDOWN_MASK; + reg &= ~DWC3_GCTL_DISSCRAMBLE; + switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc3_hwparams1)) { + case DWC3_GHWPARAMS1_EN_PWROPT_CLK: + reg &= ~DWC3_GCTL_DSBLCLKGTNG; + break; + default: + debug("No power optimization available\n"); + } + + /* + * WORKAROUND: DWC3 revisions <1.90a have a bug + * where the device can fail to connect at SuperSpeed + * and falls back to high-speed mode which causes + * the device to enter a Connect/Disconnect loop + */ + if ((revision & DWC3_REVISION_MASK) < 0x190a) + reg |= DWC3_GCTL_U2RSTECN; + + writel(reg, &dwc3_reg->g_ctl); + + return 0; +} |