powerpc, 5xxx, 512x: remove support for mpc5xxx and mpc512x

There was for long time no activity in the mpx5xxx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in mpc5xxx,
so remove it.

Signed-off-by: Heiko Schocher <hs@denx.de>

4 files changed, 0 insertions, 156 deletions

diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index a73b255..ab5a99f 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -26,11 +26,7 @@ obj-$(CONFIG_USB_OHCI_GENERIC) += ohci-generic.o
 obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
 obj-$(CONFIG_USB_EHCI_ARMADA100) += ehci-armada100.o utmi-armada100.o
 obj-$(CONFIG_USB_EHCI_ATMEL) += ehci-atmel.o
-ifdef CONFIG_MPC512X
-obj-$(CONFIG_USB_EHCI_FSL) += ehci-mpc512x.o
-else
 obj-$(CONFIG_USB_EHCI_FSL) += ehci-fsl.o
-endif
 obj-$(CONFIG_USB_EHCI_FARADAY) += ehci-faraday.o
 obj-$(CONFIG_USB_EHCI_GENERIC) += ehci-generic.o
 obj-$(CONFIG_USB_EHCI_EXYNOS) += ehci-exynos.o
diff --git a/drivers/usb/host/ehci-mpc512x.c b/drivers/usb/host/ehci-mpc512x.c
deleted file mode 100644
index bb4f461..0000000
--- a/drivers/usb/host/ehci-mpc512x.c
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- * (C) Copyright 2010, Damien Dusha, <d.dusha@gmail.com>
- *
- * (C) Copyright 2009, Value Team S.p.A.
- * Francesco Rendine, <francesco.rendine@valueteam.com>
- *
- * (C) Copyright 2009 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2008, Excito Elektronik i Sk=E5ne AB
- *
- * Author: Tor Krill tor@excito.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <pci.h>
-#include <usb.h>
-#include <asm/io.h>
-#include <usb/ehci-ci.h>
-
-#include "ehci.h"
-
-static void fsl_setup_phy(volatile struct ehci_hcor *);
-static void fsl_platform_set_host_mode(volatile struct usb_ehci *ehci);
-static int reset_usb_controller(volatile struct usb_ehci *ehci);
-static void usb_platform_dr_init(volatile struct usb_ehci *ehci);
-
-/*
- * Initialize SOC FSL EHCI Controller
- *
- * This code is derived from EHCI FSL USB Linux driver for MPC5121
- *
- */
-int ehci_hcd_init(int index, enum usb_init_type init,
-		struct ehci_hccr **hccr, struct ehci_hcor **hcor)
-{
-	volatile struct usb_ehci *ehci;
-
-	/* Hook the memory mapped registers for EHCI-Controller */
-	ehci = (struct usb_ehci *)CONFIG_SYS_FSL_USB1_ADDR;
-	*hccr = (struct ehci_hccr *)((uint32_t)&(ehci->caplength));
-	*hcor = (struct ehci_hcor *)((uint32_t) *hccr +
-				HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
-
-	/* configure interface for UTMI_WIDE */
-	usb_platform_dr_init(ehci);
-
-	/* Init Phy USB0 to UTMI+ */
-	fsl_setup_phy(*hcor);
-
-	/* Set to host mode */
-	fsl_platform_set_host_mode(ehci);
-
-	/*
-	 * Setting the burst size seems to be required to prevent the
-	 * USB from hanging when communicating with certain USB Mass
-	 * storage devices. This was determined by analysing the
-	 * EHCI registers under Linux vs U-Boot and burstsize was the
-	 * major non-interrupt related difference between the two
-	 * implementations.
-	 *
-	 * Some USB sticks behave better than others. In particular,
-	 * the following USB stick is especially problematic:
-	 * 0930:6545 Toshiba Corp
-	 *
-	 * The burstsize is set here to match the Linux implementation.
-	 */
-	out_be32(&ehci->burstsize, FSL_EHCI_TXPBURST(8) |
-				   FSL_EHCI_RXPBURST(8));
-
-	return 0;
-}
-
-/*
- * Destroy the appropriate control structures corresponding
- * the the EHCI host controller.
- */
-int ehci_hcd_stop(int index)
-{
-	volatile struct usb_ehci *ehci;
-	int exit_status = 0;
-
-	/* Reset the USB controller */
-	ehci = (struct usb_ehci *)CONFIG_SYS_FSL_USB1_ADDR;
-	exit_status = reset_usb_controller(ehci);
-
-	return exit_status;
-}
-
-static int reset_usb_controller(volatile struct usb_ehci *ehci)
-{
-	unsigned int i;
-
-	/* Command a reset of the USB Controller */
-	out_be32(&(ehci->usbcmd), CMD_RESET);
-
-	/* Wait for the reset process to finish */
-	for (i = 65535 ; i > 0 ; i--) {
-		/*
-		 * The host will set this bit to zero once the
-		 * reset process is complete
-		 */
-		if ((in_be32(&(ehci->usbcmd)) & CMD_RESET) == 0)
-			return 0;
-	}
-
-	/* Hub did not reset in time */
-	return -1;
-}
-
-static void fsl_setup_phy(volatile struct ehci_hcor *hcor)
-{
-	uint32_t portsc;
-
-	portsc  = ehci_readl(&hcor->or_portsc[0]);
-	portsc &= ~(PORT_PTS_MSK | PORT_PTS_PTW);
-
-	/* Enable the phy mode to UTMI Wide */
-	portsc |= PORT_PTS_PTW;
-	portsc |= PORT_PTS_UTMI;
-
-	ehci_writel(&hcor->or_portsc[0], portsc);
-}
-
-static void fsl_platform_set_host_mode(volatile struct usb_ehci *ehci)
-{
-	uint32_t temp;
-
-	temp  = in_le32(&ehci->usbmode);
-	temp |= CM_HOST | ES_BE;
-	out_le32(&ehci->usbmode, temp);
-}
-
-static void usb_platform_dr_init(volatile struct usb_ehci *ehci)
-{
-	/* Configure interface for UTMI_WIDE */
-	out_be32(&ehci->isiphyctrl, PHYCTRL_PHYE | PHYCTRL_PXE);
-	out_be32(&ehci->usbgenctrl, GC_PPP | GC_PFP );
-}
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index b5e0304..272df07 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -53,7 +53,6 @@
 #if defined(CONFIG_CPU_ARM920T) || \
     defined(CONFIG_440EP) || \
     defined(CONFIG_PCI_OHCI) || \
-    defined(CONFIG_MPC5200) || \
     defined(CONFIG_SYS_OHCI_USE_NPS)
 # define OHCI_USE_NPS		/* force NoPowerSwitching mode */
 #endif
@@ -1088,10 +1087,6 @@ static void check_status(td_t *td_list)
 				*phwHeadP &= m32_swap(0xfffffff2);
 			flush_dcache_ed(td_list->ed);
 		}
-#ifdef CONFIG_MPC5200
-		td_list->hwNextTD = 0;
-		flush_dcache_td(td_list);
-#endif
 	}
 }
 
diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h
index db0924c..2350831 100644
--- a/drivers/usb/host/ohci.h
+++ b/drivers/usb/host/ohci.h
@@ -115,9 +115,7 @@ struct td {
 	__u32 hwNextTD;		/* Next TD Pointer */
 	__u32 hwBE;		/* Memory Buffer End Pointer */
 
-/* #ifndef CONFIG_MPC5200 /\* this seems wrong *\/ */
 	__u16 hwPSW[MAXPSW];
-/* #endif */
 	__u8 unused;
 	__u8 index;
 	struct ed *ed;
@@ -141,13 +139,8 @@ typedef struct td td_t;
 #define NUM_INTS 32	/* part of the OHCI standard */
 struct ohci_hcca {
 	__u32	int_table[NUM_INTS];	/* Interrupt ED table */
-#if defined(CONFIG_MPC5200)
-	__u16	pad1;			/* set to 0 on each frame_no change */
-	__u16	frame_no;		/* current frame number */
-#else
 	__u16	frame_no;		/* current frame number */
 	__u16	pad1;			/* set to 0 on each frame_no change */
-#endif
 	__u32	done_head;		/* info returned for an interrupt */
 	u8		reserved_for_hc[116];
 } __attribute__((aligned(256)));