diff options
author | Sylvain Lemieux <slemieux@tycoint.com> | 2015-08-13 19:40:20 (GMT) |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2015-08-18 17:45:56 (GMT) |
commit | 5f63bf3ec8ccbef09dfb9fc76063fc0ba20fa712 (patch) | |
tree | dc0dce1ca38e8ca90fc10236a81017b009bb7f86 /drivers | |
parent | 327f0d23c8a3c5cdc6076cf8fb1b0deb86221260 (diff) | |
download | u-boot-5f63bf3ec8ccbef09dfb9fc76063fc0ba20fa712.tar.xz |
nand: lpc32xx: add hardware ECC support
Incorporate NAND SLC hardware ECC support from legacy LPCLinux NXP BSP.
The code taken from the legacy patch is:
- lpc32xx SLC NAND driver (hardware ECC support)
- lpc3250 header file missing SLC NAND registers definition
The legacy driver was updated and clean-up as part of the integration with the existing NAND SLC driver.
Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
Tested-by: Vladimir Zapolskiy <vz@mleia.com>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/mtd/nand/lpc32xx_nand_slc.c | 413 |
1 files changed, 409 insertions, 4 deletions
diff --git a/drivers/mtd/nand/lpc32xx_nand_slc.c b/drivers/mtd/nand/lpc32xx_nand_slc.c index 719a74d..dbb95d9 100644 --- a/drivers/mtd/nand/lpc32xx_nand_slc.c +++ b/drivers/mtd/nand/lpc32xx_nand_slc.c @@ -3,15 +3,29 @@ * * (C) Copyright 2015 Vladimir Zapolskiy <vz@mleia.com> * + * Hardware ECC support original source code + * Copyright (C) 2008 by NXP Semiconductors + * Author: Kevin Wells + * + * Copyright (c) 2015 Tyco Fire Protection Products. + * * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> #include <nand.h> +#include <linux/mtd/nand_ecc.h> #include <asm/errno.h> #include <asm/io.h> +#include <asm/arch/config.h> #include <asm/arch/clk.h> #include <asm/arch/sys_proto.h> +#include <asm/arch/dma.h> +#include <asm/arch/cpu.h> + +#if defined(CONFIG_DMA_LPC32XX) && defined(CONFIG_SPL_BUILD) +#warning "DMA support in SPL image is not tested" +#endif struct lpc32xx_nand_slc_regs { u32 data; @@ -33,11 +47,18 @@ struct lpc32xx_nand_slc_regs { /* CFG register */ #define CFG_CE_LOW (1 << 5) +#define CFG_DMA_ECC (1 << 4) /* Enable DMA ECC bit */ +#define CFG_ECC_EN (1 << 3) /* ECC enable bit */ +#define CFG_DMA_BURST (1 << 2) /* DMA burst bit */ +#define CFG_DMA_DIR (1 << 1) /* DMA write(0)/read(1) bit */ /* CTRL register */ #define CTRL_SW_RESET (1 << 2) +#define CTRL_ECC_CLEAR (1 << 1) /* Reset ECC bit */ +#define CTRL_DMA_START (1 << 0) /* Start DMA channel bit */ /* STAT register */ +#define STAT_DMA_FIFO (1 << 2) /* DMA FIFO has data bit */ #define STAT_NAND_READY (1 << 0) /* INT_STAT register */ @@ -54,6 +75,30 @@ struct lpc32xx_nand_slc_regs { #define TAC_R_HOLD(n) (max_t(uint32_t, (n), 0xF) << 4) #define TAC_R_SETUP(n) (max_t(uint32_t, (n), 0xF) << 0) +#if defined(CONFIG_DMA_LPC32XX) +#define ECCSTEPS (CONFIG_SYS_NAND_PAGE_SIZE / CONFIG_SYS_NAND_ECCSIZE) + +/* + * DMA Descriptors + * For Large Block: 17 descriptors = ((16 Data and ECC Read) + 1 Spare Area) + * For Small Block: 5 descriptors = ((4 Data and ECC Read) + 1 Spare Area) + */ +static struct lpc32xx_dmac_ll dmalist[ECCSTEPS * 2 + 1]; +static u32 ecc_buffer[8]; /* MAX ECC size */ +static unsigned int dmachan = (unsigned int)-1; /* Invalid channel */ + +/* + * Helper macro for the DMA client (i.e. NAND SLC): + * - to write the next DMA linked list item address + * (see arch/include/asm/arch-lpc32xx/dma.h). + * - to assign the DMA data register to DMA source or destination address. + * - to assign the ECC register to DMA source or destination address. + */ +#define lpc32xx_dmac_next_lli(x) ((u32)x) +#define lpc32xx_dmac_set_dma_data() ((u32)&lpc32xx_nand_slc_regs->dma_data) +#define lpc32xx_dmac_set_ecc() ((u32)&lpc32xx_nand_slc_regs->ecc) +#endif + static struct lpc32xx_nand_slc_regs __iomem *lpc32xx_nand_slc_regs = (struct lpc32xx_nand_slc_regs __iomem *)SLC_NAND_BASE; @@ -108,28 +153,353 @@ static int lpc32xx_nand_dev_ready(struct mtd_info *mtd) return readl(&lpc32xx_nand_slc_regs->stat) & STAT_NAND_READY; } +#if defined(CONFIG_DMA_LPC32XX) +/* + * Prepares DMA descriptors for NAND RD/WR operations + * If the size is < 256 Bytes then it is assumed to be + * an OOB transfer + */ +static void lpc32xx_nand_dma_configure(struct nand_chip *chip, + const u8 *buffer, int size, + int read) +{ + u32 i, dmasrc, ctrl, ecc_ctrl, oob_ctrl, dmadst; + struct lpc32xx_dmac_ll *dmalist_cur; + struct lpc32xx_dmac_ll *dmalist_cur_ecc; + + /* + * CTRL descriptor entry for reading ECC + * Copy Multiple times to sync DMA with Flash Controller + */ + ecc_ctrl = 0x5 | + DMAC_CHAN_SRC_BURST_1 | + DMAC_CHAN_DEST_BURST_1 | + DMAC_CHAN_SRC_WIDTH_32 | + DMAC_CHAN_DEST_WIDTH_32 | + DMAC_CHAN_DEST_AHB1; + + /* CTRL descriptor entry for reading/writing Data */ + ctrl = (CONFIG_SYS_NAND_ECCSIZE / 4) | + DMAC_CHAN_SRC_BURST_4 | + DMAC_CHAN_DEST_BURST_4 | + DMAC_CHAN_SRC_WIDTH_32 | + DMAC_CHAN_DEST_WIDTH_32 | + DMAC_CHAN_DEST_AHB1; + + /* CTRL descriptor entry for reading/writing Spare Area */ + oob_ctrl = (CONFIG_SYS_NAND_OOBSIZE / 4) | + DMAC_CHAN_SRC_BURST_4 | + DMAC_CHAN_DEST_BURST_4 | + DMAC_CHAN_SRC_WIDTH_32 | + DMAC_CHAN_DEST_WIDTH_32 | + DMAC_CHAN_DEST_AHB1; + + if (read) { + dmasrc = lpc32xx_dmac_set_dma_data(); + dmadst = (u32)buffer; + ctrl |= DMAC_CHAN_DEST_AUTOINC; + } else { + dmadst = lpc32xx_dmac_set_dma_data(); + dmasrc = (u32)buffer; + ctrl |= DMAC_CHAN_SRC_AUTOINC; + } + + /* + * Write Operation Sequence for Small Block NAND + * ---------------------------------------------------------- + * 1. X'fer 256 bytes of data from Memory to Flash. + * 2. Copy generated ECC data from Register to Spare Area + * 3. X'fer next 256 bytes of data from Memory to Flash. + * 4. Copy generated ECC data from Register to Spare Area. + * 5. X'fer 16 byets of Spare area from Memory to Flash. + * Read Operation Sequence for Small Block NAND + * ---------------------------------------------------------- + * 1. X'fer 256 bytes of data from Flash to Memory. + * 2. Copy generated ECC data from Register to ECC calc Buffer. + * 3. X'fer next 256 bytes of data from Flash to Memory. + * 4. Copy generated ECC data from Register to ECC calc Buffer. + * 5. X'fer 16 bytes of Spare area from Flash to Memory. + * Write Operation Sequence for Large Block NAND + * ---------------------------------------------------------- + * 1. Steps(1-4) of Write Operations repeate for four times + * which generates 16 DMA descriptors to X'fer 2048 bytes of + * data & 32 bytes of ECC data. + * 2. X'fer 64 bytes of Spare area from Memory to Flash. + * Read Operation Sequence for Large Block NAND + * ---------------------------------------------------------- + * 1. Steps(1-4) of Read Operations repeate for four times + * which generates 16 DMA descriptors to X'fer 2048 bytes of + * data & 32 bytes of ECC data. + * 2. X'fer 64 bytes of Spare area from Flash to Memory. + */ + + for (i = 0; i < size/CONFIG_SYS_NAND_ECCSIZE; i++) { + dmalist_cur = &dmalist[i * 2]; + dmalist_cur_ecc = &dmalist[(i * 2) + 1]; + + dmalist_cur->dma_src = (read ? (dmasrc) : (dmasrc + (i*256))); + dmalist_cur->dma_dest = (read ? (dmadst + (i*256)) : dmadst); + dmalist_cur->next_lli = lpc32xx_dmac_next_lli(dmalist_cur_ecc); + dmalist_cur->next_ctrl = ctrl; + + dmalist_cur_ecc->dma_src = lpc32xx_dmac_set_ecc(); + dmalist_cur_ecc->dma_dest = (u32)&ecc_buffer[i]; + dmalist_cur_ecc->next_lli = + lpc32xx_dmac_next_lli(&dmalist[(i * 2) + 2]); + dmalist_cur_ecc->next_ctrl = ecc_ctrl; + } + + if (i) { /* Data only transfer */ + dmalist_cur_ecc = &dmalist[(i * 2) - 1]; + dmalist_cur_ecc->next_lli = 0; + dmalist_cur_ecc->next_ctrl |= DMAC_CHAN_INT_TC_EN; + return; + } + + /* OOB only transfer */ + if (read) { + dmasrc = lpc32xx_dmac_set_dma_data(); + dmadst = (u32)buffer; + oob_ctrl |= DMAC_CHAN_DEST_AUTOINC; + } else { + dmadst = lpc32xx_dmac_set_dma_data(); + dmasrc = (u32)buffer; + oob_ctrl |= DMAC_CHAN_SRC_AUTOINC; + } + + /* Read/ Write Spare Area Data To/From Flash */ + dmalist_cur = &dmalist[i * 2]; + dmalist_cur->dma_src = dmasrc; + dmalist_cur->dma_dest = dmadst; + dmalist_cur->next_lli = 0; + dmalist_cur->next_ctrl = (oob_ctrl | DMAC_CHAN_INT_TC_EN); +} + +static void lpc32xx_nand_xfer(struct mtd_info *mtd, const u8 *buf, + int len, int read) +{ + struct nand_chip *chip = mtd->priv; + u32 config; + int ret; + + /* DMA Channel Configuration */ + config = (read ? DMAC_CHAN_FLOW_D_P2M : DMAC_CHAN_FLOW_D_M2P) | + (read ? DMAC_DEST_PERIP(0) : DMAC_DEST_PERIP(DMA_PERID_NAND1)) | + (read ? DMAC_SRC_PERIP(DMA_PERID_NAND1) : DMAC_SRC_PERIP(0)) | + DMAC_CHAN_ENABLE; + + /* Prepare DMA descriptors */ + lpc32xx_nand_dma_configure(chip, buf, len, read); + + /* Setup SLC controller and start transfer */ + if (read) + setbits_le32(&lpc32xx_nand_slc_regs->cfg, CFG_DMA_DIR); + else /* NAND_ECC_WRITE */ + clrbits_le32(&lpc32xx_nand_slc_regs->cfg, CFG_DMA_DIR); + setbits_le32(&lpc32xx_nand_slc_regs->cfg, CFG_DMA_BURST); + + /* Write length for new transfers */ + if (!((readl(&lpc32xx_nand_slc_regs->stat) & STAT_DMA_FIFO) | + readl(&lpc32xx_nand_slc_regs->tc))) { + int tmp = (len != mtd->oobsize) ? mtd->oobsize : 0; + writel(len + tmp, &lpc32xx_nand_slc_regs->tc); + } + + setbits_le32(&lpc32xx_nand_slc_regs->ctrl, CTRL_DMA_START); + + /* Start DMA transfers */ + ret = lpc32xx_dma_start_xfer(dmachan, dmalist, config); + if (unlikely(ret < 0)) + BUG(); + + + /* Wait for NAND to be ready */ + while (!lpc32xx_nand_dev_ready(mtd)) + ; + + /* Wait till DMA transfer is DONE */ + if (lpc32xx_dma_wait_status(dmachan)) + pr_err("NAND DMA transfer error!\r\n"); + + /* Stop DMA & HW ECC */ + clrbits_le32(&lpc32xx_nand_slc_regs->ctrl, CTRL_DMA_START); + clrbits_le32(&lpc32xx_nand_slc_regs->cfg, + CFG_DMA_DIR | CFG_DMA_BURST | CFG_ECC_EN | CFG_DMA_ECC); +} + +static u32 slc_ecc_copy_to_buffer(u8 *spare, const u32 *ecc, int count) +{ + int i; + for (i = 0; i < (count * CONFIG_SYS_NAND_ECCBYTES); + i += CONFIG_SYS_NAND_ECCBYTES) { + u32 ce = ecc[i / CONFIG_SYS_NAND_ECCBYTES]; + ce = ~(ce << 2) & 0xFFFFFF; + spare[i+2] = (u8)(ce & 0xFF); ce >>= 8; + spare[i+1] = (u8)(ce & 0xFF); ce >>= 8; + spare[i] = (u8)(ce & 0xFF); + } + return 0; +} + +static int lpc32xx_ecc_calculate(struct mtd_info *mtd, const uint8_t *dat, + uint8_t *ecc_code) +{ + return slc_ecc_copy_to_buffer(ecc_code, ecc_buffer, ECCSTEPS); +} + +/* + * Enables and prepares SLC NAND controller + * for doing data transfers with H/W ECC enabled. + */ +static void lpc32xx_hwecc_enable(struct mtd_info *mtd, int mode) +{ + /* Clear ECC */ + writel(CTRL_ECC_CLEAR, &lpc32xx_nand_slc_regs->ctrl); + + /* Setup SLC controller for H/W ECC operations */ + setbits_le32(&lpc32xx_nand_slc_regs->cfg, CFG_ECC_EN | CFG_DMA_ECC); +} + +/* + * lpc32xx_correct_data - [NAND Interface] Detect and correct bit error(s) + * mtd: MTD block structure + * dat: raw data read from the chip + * read_ecc: ECC from the chip + * calc_ecc: the ECC calculated from raw data + * + * Detect and correct a 1 bit error for 256 byte block + */ +int lpc32xx_correct_data(struct mtd_info *mtd, u_char *dat, + u_char *read_ecc, u_char *calc_ecc) +{ + unsigned int i; + int ret1, ret2 = 0; + u_char *r = read_ecc; + u_char *c = calc_ecc; + u16 data_offset = 0; + + for (i = 0 ; i < ECCSTEPS ; i++) { + r += CONFIG_SYS_NAND_ECCBYTES; + c += CONFIG_SYS_NAND_ECCBYTES; + data_offset += CONFIG_SYS_NAND_ECCSIZE; + + ret1 = nand_correct_data(mtd, dat + data_offset, r, c); + if (ret1 < 0) + return -EBADMSG; + else + ret2 += ret1; + } + + return ret2; +} +#endif + +#if defined(CONFIG_DMA_LPC32XX) +static void lpc32xx_dma_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) +{ + lpc32xx_nand_xfer(mtd, buf, len, 1); +} +#else static void lpc32xx_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) { while (len-- > 0) *buf++ = readl(&lpc32xx_nand_slc_regs->data); } +#endif static uint8_t lpc32xx_read_byte(struct mtd_info *mtd) { return readl(&lpc32xx_nand_slc_regs->data); } +#if defined(CONFIG_DMA_LPC32XX) +static void lpc32xx_dma_write_buf(struct mtd_info *mtd, const uint8_t *buf, + int len) +{ + lpc32xx_nand_xfer(mtd, buf, len, 0); +} +#else static void lpc32xx_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) { while (len-- > 0) writel(*buf++, &lpc32xx_nand_slc_regs->data); } +#endif static void lpc32xx_write_byte(struct mtd_info *mtd, uint8_t byte) { writel(byte, &lpc32xx_nand_slc_regs->data); } +#if defined(CONFIG_DMA_LPC32XX) +/* Reuse the logic from "nand_read_page_hwecc()" */ +static int lpc32xx_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *buf, int oob_required, int page) +{ + int i; + int stat; + uint8_t *p = buf; + uint8_t *ecc_calc = chip->buffers->ecccalc; + uint8_t *ecc_code = chip->buffers->ecccode; + uint32_t *eccpos = chip->ecc.layout->eccpos; + unsigned int max_bitflips = 0; + + /* + * As per the "LPC32x0 and LPC32x0/01 User manual" table 173 notes + * and section 9.7, the NAND SLC & DMA allowed single DMA transaction + * of a page size using DMA controller scatter/gather mode through + * linked list; the ECC read is done without any software intervention. + */ + + lpc32xx_hwecc_enable(mtd, NAND_ECC_READ); + lpc32xx_dma_read_buf(mtd, p, chip->ecc.size * chip->ecc.steps); + lpc32xx_ecc_calculate(mtd, p, &ecc_calc[0]); + lpc32xx_dma_read_buf(mtd, chip->oob_poi, mtd->oobsize); + + for (i = 0; i < chip->ecc.total; i++) + ecc_code[i] = chip->oob_poi[eccpos[i]]; + + stat = chip->ecc.correct(mtd, p, &ecc_code[0], &ecc_calc[0]); + if (stat < 0) + mtd->ecc_stats.failed++; + else { + mtd->ecc_stats.corrected += stat; + max_bitflips = max_t(unsigned int, max_bitflips, stat); + } + + return max_bitflips; +} + +/* Reuse the logic from "nand_write_page_hwecc()" */ +static int lpc32xx_write_page_hwecc(struct mtd_info *mtd, + struct nand_chip *chip, + const uint8_t *buf, int oob_required) +{ + int i; + uint8_t *ecc_calc = chip->buffers->ecccalc; + const uint8_t *p = buf; + uint32_t *eccpos = chip->ecc.layout->eccpos; + + /* + * As per the "LPC32x0 and LPC32x0/01 User manual" table 173 notes + * and section 9.7, the NAND SLC & DMA allowed single DMA transaction + * of a page size using DMA controller scatter/gather mode through + * linked list; the ECC read is done without any software intervention. + */ + + lpc32xx_hwecc_enable(mtd, NAND_ECC_WRITE); + lpc32xx_dma_write_buf(mtd, p, chip->ecc.size * chip->ecc.steps); + lpc32xx_ecc_calculate(mtd, p, &ecc_calc[0]); + + for (i = 0; i < chip->ecc.total; i++) + chip->oob_poi[eccpos[i]] = ecc_calc[i]; + + lpc32xx_dma_write_buf(mtd, chip->oob_poi, mtd->oobsize); + + return 0; +} +#endif + /* * LPC32xx has only one SLC NAND controller, don't utilize * CONFIG_SYS_NAND_SELF_INIT to be able to reuse this function @@ -137,10 +507,46 @@ static void lpc32xx_write_byte(struct mtd_info *mtd, uint8_t byte) */ int board_nand_init(struct nand_chip *lpc32xx_chip) { +#if defined(CONFIG_DMA_LPC32XX) + int ret; + + /* Acquire a channel for our use */ + ret = lpc32xx_dma_get_channel(); + if (unlikely(ret < 0)) { + pr_info("Unable to get free DMA channel for NAND transfers\n"); + return -1; + } + dmachan = (unsigned int)ret; +#endif + lpc32xx_chip->cmd_ctrl = lpc32xx_nand_cmd_ctrl; lpc32xx_chip->dev_ready = lpc32xx_nand_dev_ready; /* + * The implementation of these functions is quite common, but + * they MUST be defined, because access to data register + * is strictly 32-bit aligned. + */ + lpc32xx_chip->read_byte = lpc32xx_read_byte; + lpc32xx_chip->write_byte = lpc32xx_write_byte; + +#if defined(CONFIG_DMA_LPC32XX) + /* Hardware ECC calculation is supported when DMA driver is selected */ + lpc32xx_chip->ecc.mode = NAND_ECC_HW; + + lpc32xx_chip->read_buf = lpc32xx_dma_read_buf; + lpc32xx_chip->write_buf = lpc32xx_dma_write_buf; + + lpc32xx_chip->ecc.calculate = lpc32xx_ecc_calculate; + lpc32xx_chip->ecc.correct = lpc32xx_correct_data; + lpc32xx_chip->ecc.hwctl = lpc32xx_hwecc_enable; + lpc32xx_chip->chip_delay = 2000; + + lpc32xx_chip->ecc.read_page = lpc32xx_read_page_hwecc; + lpc32xx_chip->ecc.write_page = lpc32xx_write_page_hwecc; + lpc32xx_chip->options |= NAND_NO_SUBPAGE_WRITE; +#else + /* * Hardware ECC calculation is not supported by the driver, * because it requires DMA support, see LPC32x0 User Manual, * note after SLC_ECC register description (UM10326, p.198) @@ -153,16 +559,15 @@ int board_nand_init(struct nand_chip *lpc32xx_chip) * is strictly 32-bit aligned. */ lpc32xx_chip->read_buf = lpc32xx_read_buf; - lpc32xx_chip->read_byte = lpc32xx_read_byte; lpc32xx_chip->write_buf = lpc32xx_write_buf; - lpc32xx_chip->write_byte = lpc32xx_write_byte; +#endif /* * Use default ECC layout, but these values are predefined * for both small and large page NAND flash devices. */ - lpc32xx_chip->ecc.size = 256; - lpc32xx_chip->ecc.bytes = 3; + lpc32xx_chip->ecc.size = CONFIG_SYS_NAND_ECCSIZE; + lpc32xx_chip->ecc.bytes = CONFIG_SYS_NAND_ECCBYTES; lpc32xx_chip->ecc.strength = 1; #if defined(CONFIG_SYS_NAND_USE_FLASH_BBT) |