diff options
author | Niklaus Giger <niklaus.giger@member.fsf.org> | 2009-10-04 18:04:20 (GMT) |
---|---|---|
committer | Stefan Roese <sr@denx.de> | 2009-10-07 07:15:20 (GMT) |
commit | ddc922ff2c20ae0b7f9ce2df1ac28143e2f325bd (patch) | |
tree | 5c390395480e4cfd575ef751edd34034eaffa142 /drivers | |
parent | f80e61dcfe53fa3a5936659883415c9bd1b5a3d9 (diff) | |
download | u-boot-ddc922ff2c20ae0b7f9ce2df1ac28143e2f325bd.tar.xz |
ppc_4xx: Apply new HW register names
Modify all existing *.c files to use the new register names
as seen in the AMCC manuals.
Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
Signed-off-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/net/4xx_enet.c | 100 |
1 files changed, 50 insertions, 50 deletions
diff --git a/drivers/net/4xx_enet.c b/drivers/net/4xx_enet.c index f2c9be0..2fac641 100644 --- a/drivers/net/4xx_enet.c +++ b/drivers/net/4xx_enet.c @@ -44,7 +44,7 @@ * RX descriptor address up to the next cache line boundary. * 16-Jan-00 Added support for booting with IP of 0x0 MKW * 15-Mar-00 Updated enetInit() to enable broadcast addresses in the - * EMAC_RXM register. JWB + * EMAC0_RXM register. JWB * 12-Mar-01 anne-sophie.harnois@nextream.fr * - Variables are compatible with those already defined in * include/net.h @@ -58,7 +58,7 @@ * 08-May-01 stefan.roese@esd-electronics.com * - MAL error handling added (eth_init called again) * 13-Nov-01 stefan.roese@esd-electronics.com - * - Set IST bit in EMAC_M1 reg upon 100MBit or full duplex + * - Set IST bit in EMAC0_MR1 reg upon 100MBit or full duplex * 04-Jan-02 stefan.roese@esd-electronics.com * - Wait for PHY auto negotiation to complete added * 06-Feb-02 stefan.roese@esd-electronics.com @@ -359,7 +359,7 @@ static void ppc_4xx_eth_halt (struct eth_device *dev) EMAC_4XX_HW_PST hw_p = dev->priv; u32 val = 10000; - out_be32((void *)EMAC_IER + hw_p->hw_addr, 0x00000000); /* disable emac interrupts */ + out_be32((void *)EMAC0_IER + hw_p->hw_addr, 0x00000000); /* disable emac interrupts */ /* 1st reset MAL channel */ /* Note: writing a 0 to a channel has no effect */ @@ -382,7 +382,7 @@ static void ppc_4xx_eth_halt (struct eth_device *dev) emac_loopback_enable(hw_p); /* EMAC RESET */ - out_be32((void *)EMAC_M0 + hw_p->hw_addr, EMAC_M0_SRST); + out_be32((void *)EMAC0_MR0 + hw_p->hw_addr, EMAC_MR0_SRST); /* remove clocks for EMAC internal loopback */ emac_loopback_disable(hw_p); @@ -485,7 +485,7 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis) /* Ensure we setup mdio for this devnum and ONLY this devnum */ zmiifer |= (ZMII_FER_MDI) << ZMII_FER_V(devnum); - out_be32((void *)ZMII_FER, zmiifer); + out_be32((void *)ZMII0_FER, zmiifer); out_be32((void *)RGMII_FER, rmiifer); return ((int)pfc1); @@ -504,21 +504,21 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis) switch (pfc1) { case SDR0_PFC1_SELECT_CONFIG_2: /* 1 x GMII port */ - out_be32((void *)ZMII_FER, 0x00); + out_be32((void *)ZMII0_FER, 0x00); out_be32((void *)RGMII_FER, 0x00000037); bis->bi_phymode[0] = BI_PHYMODE_GMII; bis->bi_phymode[1] = BI_PHYMODE_NONE; break; case SDR0_PFC1_SELECT_CONFIG_4: /* 2 x RGMII ports */ - out_be32((void *)ZMII_FER, 0x00); + out_be32((void *)ZMII0_FER, 0x00); out_be32((void *)RGMII_FER, 0x00000055); bis->bi_phymode[0] = BI_PHYMODE_RGMII; bis->bi_phymode[1] = BI_PHYMODE_RGMII; break; case SDR0_PFC1_SELECT_CONFIG_6: /* 2 x SMII ports */ - out_be32((void *)ZMII_FER, + out_be32((void *)ZMII0_FER, ((ZMII_FER_SMII) << ZMII_FER_V(0)) | ((ZMII_FER_SMII) << ZMII_FER_V(1))); out_be32((void *)RGMII_FER, 0x00000000); @@ -527,7 +527,7 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis) break; case SDR0_PFC1_SELECT_CONFIG_1_2: /* only 1 x MII supported */ - out_be32((void *)ZMII_FER, (ZMII_FER_MII) << ZMII_FER_V(0)); + out_be32((void *)ZMII0_FER, (ZMII_FER_MII) << ZMII_FER_V(0)); out_be32((void *)RGMII_FER, 0x00000000); bis->bi_phymode[0] = BI_PHYMODE_MII; bis->bi_phymode[1] = BI_PHYMODE_NONE; @@ -537,9 +537,9 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis) } /* Ensure we setup mdio for this devnum and ONLY this devnum */ - zmiifer = in_be32((void *)ZMII_FER); + zmiifer = in_be32((void *)ZMII0_FER); zmiifer |= (ZMII_FER_MDI) << ZMII_FER_V(devnum); - out_be32((void *)ZMII_FER, zmiifer); + out_be32((void *)ZMII0_FER, zmiifer); return ((int)0x0); } @@ -953,18 +953,18 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) /* NOTE: Therefore, disable all other EMACS, since we handle */ /* NOTE: only one emac at a time */ reg = 0; - out_be32((void *)ZMII_FER, 0); + out_be32((void *)ZMII0_FER, 0); udelay (100); #if defined(CONFIG_440GP) || defined(CONFIG_440EP) || defined(CONFIG_440GR) - out_be32((void *)ZMII_FER, (ZMII_FER_RMII | ZMII_FER_MDI) << ZMII_FER_V (devnum)); + out_be32((void *)ZMII0_FER, (ZMII_FER_RMII | ZMII_FER_MDI) << ZMII_FER_V (devnum)); #elif defined(CONFIG_440GX) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ defined(CONFIG_460EX) || defined(CONFIG_460GT) ethgroup = ppc_4xx_eth_setup_bridge(devnum, bis); #endif - out_be32((void *)ZMII_SSR, ZMII_SSR_SP << ZMII_SSR_V(devnum)); + out_be32((void *)ZMII0_SSR, ZMII0_SSR_SP << ZMII0_SSR_V(devnum)); #endif /* defined(CONFIG_440) && !defined(CONFIG_440SP) */ #if defined(CONFIG_405EX) ethgroup = ppc_4xx_eth_setup_bridge(devnum, bis); @@ -976,13 +976,13 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) emac_loopback_enable(hw_p); /* EMAC RESET */ - out_be32((void *)EMAC_M0 + hw_p->hw_addr, EMAC_M0_SRST); + out_be32((void *)EMAC0_MR0 + hw_p->hw_addr, EMAC_MR0_SRST); /* remove clocks for EMAC internal loopback */ emac_loopback_disable(hw_p); failsafe = 1000; - while ((in_be32((void *)EMAC_M0 + hw_p->hw_addr) & (EMAC_M0_SRST)) && failsafe) { + while ((in_be32((void *)EMAC0_MR0 + hw_p->hw_addr) & (EMAC_MR0_SRST)) && failsafe) { udelay (1000); failsafe--; } @@ -1000,15 +1000,15 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) opbfreq = sysinfo.freqOPB / 1000000; if (opbfreq <= 50); else if (opbfreq <= 66) - mode_reg |= EMAC_M1_OBCI_66; + mode_reg |= EMAC_MR1_OBCI_66; else if (opbfreq <= 83) - mode_reg |= EMAC_M1_OBCI_83; + mode_reg |= EMAC_MR1_OBCI_83; else if (opbfreq <= 100) - mode_reg |= EMAC_M1_OBCI_100; + mode_reg |= EMAC_MR1_OBCI_100; else - mode_reg |= EMAC_M1_OBCI_GT100; + mode_reg |= EMAC_MR1_OBCI_GT100; - out_be32((void *)EMAC_M1 + hw_p->hw_addr, mode_reg); + out_be32((void *)EMAC0_MR1 + hw_p->hw_addr, mode_reg); #endif /* defined(CONFIG_440GX) || defined(CONFIG_440SP) */ #if defined(CONFIG_GPCS_PHY_ADDR) || defined(CONFIG_GPCS_PHY1_ADDR) || \ @@ -1041,9 +1041,9 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) #endif } - mode_reg = in_be32((void *)EMAC_M1 + hw_p->hw_addr); - mode_reg |= EMAC_M1_MF_1000GPCS | EMAC_M1_IPPA_SET(reg); - out_be32((void *)EMAC_M1 + hw_p->hw_addr, mode_reg); + mode_reg = in_be32((void *)EMAC0_MR1 + hw_p->hw_addr); + mode_reg |= EMAC_MR1_MF_1000GPCS | EMAC_MR1_IPPA_SET(reg); + out_be32((void *)EMAC0_MR1 + hw_p->hw_addr, mode_reg); /* Configure GPCS interface to recommended setting for SGMII */ miiphy_reset(dev->name, reg); @@ -1250,11 +1250,11 @@ get_speed: #endif /* Set ZMII/RGMII speed according to the phy link speed */ - reg = in_be32((void *)ZMII_SSR); + reg = in_be32((void *)ZMII0_SSR); if ( (speed == 100) || (speed == 1000) ) - out_be32((void *)ZMII_SSR, reg | (ZMII_SSR_SP << ZMII_SSR_V (devnum))); + out_be32((void *)ZMII0_SSR, reg | (ZMII0_SSR_SP << ZMII0_SSR_V (devnum))); else - out_be32((void *)ZMII_SSR, reg & (~(ZMII_SSR_SP << ZMII_SSR_V (devnum)))); + out_be32((void *)ZMII0_SSR, reg & (~(ZMII0_SSR_SP << ZMII0_SSR_V (devnum)))); if ((devnum == 2) || (devnum == 3)) { if (speed == 1000) @@ -1381,7 +1381,7 @@ get_speed: reg = reg << 8; reg |= dev->enetaddr[1]; - out_be32((void *)EMAC_IAH + hw_p->hw_addr, reg); + out_be32((void *)EMAC0_IAH + hw_p->hw_addr, reg); reg = 0x00000000; reg |= dev->enetaddr[2]; /* set low address */ @@ -1392,7 +1392,7 @@ get_speed: reg = reg << 8; reg |= dev->enetaddr[5]; - out_be32((void *)EMAC_IAL + hw_p->hw_addr, reg); + out_be32((void *)EMAC0_IAL + hw_p->hw_addr, reg); switch (devnum) { case 1: @@ -1480,9 +1480,9 @@ get_speed: mtdcr (MAL0_RXCASR, (MAL_TXRX_CASR >> hw_p->devnum)); /* set transmit enable & receive enable */ - out_be32((void *)EMAC_M0 + hw_p->hw_addr, EMAC_M0_TXE | EMAC_M0_RXE); + out_be32((void *)EMAC0_MR0 + hw_p->hw_addr, EMAC_MR0_TXE | EMAC_MR0_RXE); - mode_reg = in_be32((void *)EMAC_M1 + hw_p->hw_addr); + mode_reg = in_be32((void *)EMAC0_MR1 + hw_p->hw_addr); /* set rx-/tx-fifo size */ mode_reg = (mode_reg & ~EMAC_MR1_FIFO_MASK) | EMAC_MR1_FIFO_SIZE; @@ -1497,47 +1497,47 @@ get_speed: pfc1 |= SDR0_PFC1_EM_1000; mtsdr (SDR0_PFC1, pfc1); #endif - mode_reg = mode_reg | EMAC_M1_MF_1000MBPS | EMAC_M1_IST; + mode_reg = mode_reg | EMAC_MR1_MF_1000MBPS | EMAC_MR1_IST; } else if (speed == _100BASET) - mode_reg = mode_reg | EMAC_M1_MF_100MBPS | EMAC_M1_IST; + mode_reg = mode_reg | EMAC_MR1_MF_100MBPS | EMAC_MR1_IST; else mode_reg = mode_reg & ~0x00C00000; /* 10 MBPS */ if (duplex == FULL) - mode_reg = mode_reg | 0x80000000 | EMAC_M1_IST; + mode_reg = mode_reg | 0x80000000 | EMAC_MR1_IST; - out_be32((void *)EMAC_M1 + hw_p->hw_addr, mode_reg); + out_be32((void *)EMAC0_MR1 + hw_p->hw_addr, mode_reg); /* Enable broadcast and indvidual address */ /* TBS: enabling runts as some misbehaved nics will send runts */ - out_be32((void *)EMAC_RXM + hw_p->hw_addr, EMAC_RMR_BAE | EMAC_RMR_IAE); + out_be32((void *)EMAC0_RXM + hw_p->hw_addr, EMAC_RMR_BAE | EMAC_RMR_IAE); /* we probably need to set the tx mode1 reg? maybe at tx time */ /* set transmit request threshold register */ - out_be32((void *)EMAC_TRTR + hw_p->hw_addr, 0x18000000); /* 256 byte threshold */ + out_be32((void *)EMAC0_TRTR + hw_p->hw_addr, 0x18000000); /* 256 byte threshold */ /* set receive low/high water mark register */ #if defined(CONFIG_440) /* 440s has a 64 byte burst length */ - out_be32((void *)EMAC_RX_HI_LO_WMARK + hw_p->hw_addr, 0x80009000); + out_be32((void *)EMAC0_RX_HI_LO_WMARK + hw_p->hw_addr, 0x80009000); #else /* 405s have a 16 byte burst length */ - out_be32((void *)EMAC_RX_HI_LO_WMARK + hw_p->hw_addr, 0x0f002000); + out_be32((void *)EMAC0_RX_HI_LO_WMARK + hw_p->hw_addr, 0x0f002000); #endif /* defined(CONFIG_440) */ - out_be32((void *)EMAC_TXM1 + hw_p->hw_addr, 0xf8640000); + out_be32((void *)EMAC0_TMR1 + hw_p->hw_addr, 0xf8640000); /* Set fifo limit entry in tx mode 0 */ - out_be32((void *)EMAC_TXM0 + hw_p->hw_addr, 0x00000003); + out_be32((void *)EMAC0_TMR0 + hw_p->hw_addr, 0x00000003); /* Frame gap set */ - out_be32((void *)EMAC_I_FRAME_GAP_REG + hw_p->hw_addr, 0x00000008); + out_be32((void *)EMAC0_I_FRAME_GAP_REG + hw_p->hw_addr, 0x00000008); /* Set EMAC IER */ hw_p->emac_ier = EMAC_ISR_PTLE | EMAC_ISR_BFCS | EMAC_ISR_ORE | EMAC_ISR_IRE; if (speed == _100BASET) hw_p->emac_ier = hw_p->emac_ier | EMAC_ISR_SYE; - out_be32((void *)EMAC_ISR + hw_p->hw_addr, 0xffffffff); /* clear pending interrupts */ - out_be32((void *)EMAC_IER + hw_p->hw_addr, hw_p->emac_ier); + out_be32((void *)EMAC0_ISR + hw_p->hw_addr, 0xffffffff); /* clear pending interrupts */ + out_be32((void *)EMAC0_IER + hw_p->hw_addr, hw_p->emac_ier); if (hw_p->first_init == 0) { /* @@ -1596,8 +1596,8 @@ static int ppc_4xx_eth_send (struct eth_device *dev, volatile void *ptr, sync(); - out_be32((void *)EMAC_TXM0 + hw_p->hw_addr, - in_be32((void *)EMAC_TXM0 + hw_p->hw_addr) | EMAC_TXM0_GNP0); + out_be32((void *)EMAC0_TMR0 + hw_p->hw_addr, + in_be32((void *)EMAC0_TMR0 + hw_p->hw_addr) | EMAC_TMR0_GNP0); #ifdef INFO_4XX_ENET hw_p->stats.pkts_tx++; #endif @@ -1607,9 +1607,9 @@ static int ppc_4xx_eth_send (struct eth_device *dev, volatile void *ptr, *-----------------------------------------------------------------------*/ time_start = get_timer (0); while (1) { - temp_txm0 = in_be32((void *)EMAC_TXM0 + hw_p->hw_addr); + temp_txm0 = in_be32((void *)EMAC0_TMR0 + hw_p->hw_addr); /* loop until either TINT turns on or 3 seconds elapse */ - if ((temp_txm0 & EMAC_TXM0_GNP0) != 0) { + if ((temp_txm0 & EMAC_TMR0_GNP0) != 0) { /* transmit is done, so now check for errors * If there is an error, an interrupt should * happen when we return @@ -1678,7 +1678,7 @@ int enetInt (struct eth_device *dev) /* look for EMAC errors */ if ((uic_emac & UIC_ETHx) || (uic_emac_b & UIC_ETHxB)) { - emac_isr = in_be32((void *)EMAC_ISR + hw_p->hw_addr); + emac_isr = in_be32((void *)EMAC0_ISR + hw_p->hw_addr); emac_err(dev, emac_isr); /* clear EMAC error interrupt status bits */ @@ -1761,7 +1761,7 @@ static void emac_err (struct eth_device *dev, unsigned long isr) EMAC_4XX_HW_PST hw_p = dev->priv; printf ("EMAC%d error occured.... ISR = %lx\n", hw_p->devnum, isr); - out_be32((void *)EMAC_ISR + hw_p->hw_addr, isr); + out_be32((void *)EMAC0_ISR + hw_p->hw_addr, isr); } /*-----------------------------------------------------------------------------+ |