diff options
author | roy zang <tie-fei.zang@freescale.com> | 2006-12-01 03:47:36 (GMT) |
---|---|---|
committer | Zang Tiefei <roy@bus.ap.freescale.net> | 2006-12-01 03:47:36 (GMT) |
commit | ee311214e0d216f904feea269599d0934bf71f23 (patch) | |
tree | 8f942227d016d8cc52a12f4b66a02e4b1e7ed19b /drivers | |
parent | 6bd87c0aeea441c49d59fd542b84a9be88d08b17 (diff) | |
download | u-boot-ee311214e0d216f904feea269599d0934bf71f23.tar.xz |
Clean up the code according to codestyle:
(1) remove some C++ comments.
(2) remove trailing white space.
(3) remove trailing empty line.
(4) Indentation by table.
(5) remove {} in one line condition.
(6) add space before '(' in function call.
Remove some weird printf () output.
Add necessary comments.
Modified Makefile to support building in a separate directory.
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/tsi108_eth.c | 835 | ||||
-rw-r--r-- | drivers/tsi108_i2c.c | 60 | ||||
-rw-r--r-- | drivers/tsi108_pci.c | 34 |
3 files changed, 460 insertions, 469 deletions
diff --git a/drivers/tsi108_eth.c b/drivers/tsi108_eth.c index d95a047..47341be 100644 --- a/drivers/tsi108_eth.c +++ b/drivers/tsi108_eth.c @@ -46,7 +46,9 @@ #endif #if TSI108_ETH_DEBUG > 0 -#define debug_lev(lev, fmt, args...) if (lev <= TSI108_ETH_DEBUG) printf("%s %d: " fmt, __FUNCTION__, __LINE__, ##args) +#define debug_lev(lev, fmt, args...) \ +if (lev <= TSI108_ETH_DEBUG) \ +printf ("%s %d: " fmt, __FUNCTION__, __LINE__, ##args) #else #define debug_lev(lev, fmt, args...) do{}while(0) #endif @@ -54,322 +56,322 @@ #define RX_PRINT_ERRORS #define TX_PRINT_ERRORS -#define ETH_BASE (CFG_TSI108_CSR_BASE + 0x6000) +#define ETH_BASE (CFG_TSI108_CSR_BASE + 0x6000) -#define ETH_PORT_OFFSET 0x400 +#define ETH_PORT_OFFSET 0x400 #define __REG32(base, offset) (*((volatile u32 *)((char *)(base) + (offset)))) -#define reg_MAC_CONFIG_1(base) __REG32(base, 0x00000000) -#define MAC_CONFIG_1_TX_ENABLE (0x00000001) -#define MAC_CONFIG_1_SYNC_TX_ENABLE (0x00000002) -#define MAC_CONFIG_1_RX_ENABLE (0x00000004) -#define MAC_CONFIG_1_SYNC_RX_ENABLE (0x00000008) -#define MAC_CONFIG_1_TX_FLOW_CONTROL (0x00000010) -#define MAC_CONFIG_1_RX_FLOW_CONTROL (0x00000020) -#define MAC_CONFIG_1_LOOP_BACK (0x00000100) -#define MAC_CONFIG_1_RESET_TX_FUNCTION (0x00010000) -#define MAC_CONFIG_1_RESET_RX_FUNCTION (0x00020000) -#define MAC_CONFIG_1_RESET_TX_MAC (0x00040000) -#define MAC_CONFIG_1_RESET_RX_MAC (0x00080000) -#define MAC_CONFIG_1_SIM_RESET (0x40000000) -#define MAC_CONFIG_1_SOFT_RESET (0x80000000) - -#define reg_MAC_CONFIG_2(base) __REG32(base, 0x00000004) -#define MAC_CONFIG_2_FULL_DUPLEX (0x00000001) -#define MAC_CONFIG_2_CRC_ENABLE (0x00000002) -#define MAC_CONFIG_2_PAD_CRC (0x00000004) -#define MAC_CONFIG_2_LENGTH_CHECK (0x00000010) -#define MAC_CONFIG_2_HUGE_FRAME (0x00000020) -#define MAC_CONFIG_2_INTERFACE_MODE(val) (((val) & 0x3) << 8) -#define MAC_CONFIG_2_PREAMBLE_LENGTH(val) (((val) & 0xf) << 12) -#define INTERFACE_MODE_NIBBLE 1 /* 10/100 Mb/s MII) */ -#define INTERFACE_MODE_BYTE 2 /* 1000 Mb/s GMII/TBI */ - -#define reg_MAXIMUM_FRAME_LENGTH(base) __REG32(base, 0x00000010) - -#define reg_MII_MGMT_CONFIG(base) __REG32(base, 0x00000020) -#define MII_MGMT_CONFIG_MGMT_CLOCK_SELECT(val) ((val) & 0x7) -#define MII_MGMT_CONFIG_NO_PREAMBLE (0x00000010) -#define MII_MGMT_CONFIG_SCAN_INCREMENT (0x00000020) -#define MII_MGMT_CONFIG_RESET_MGMT (0x80000000) - -#define reg_MII_MGMT_COMMAND(base) __REG32(base, 0x00000024) -#define MII_MGMT_COMMAND_READ_CYCLE (0x00000001) -#define MII_MGMT_COMMAND_SCAN_CYCLE (0x00000002) - -#define reg_MII_MGMT_ADDRESS(base) __REG32(base, 0x00000028) -#define reg_MII_MGMT_CONTROL(base) __REG32(base, 0x0000002c) -#define reg_MII_MGMT_STATUS(base) __REG32(base, 0x00000030) - -#define reg_MII_MGMT_INDICATORS(base) __REG32(base, 0x00000034) -#define MII_MGMT_INDICATORS_BUSY (0x00000001) -#define MII_MGMT_INDICATORS_SCAN (0x00000002) -#define MII_MGMT_INDICATORS_NOT_VALID (0x00000004) - -#define reg_INTERFACE_STATUS(base) __REG32(base, 0x0000003c) -#define INTERFACE_STATUS_LINK_FAIL (0x00000008) -#define INTERFACE_STATUS_EXCESS_DEFER (0x00000200) - -#define reg_STATION_ADDRESS_1(base) __REG32(base, 0x00000040) -#define reg_STATION_ADDRESS_2(base) __REG32(base, 0x00000044) - -#define reg_PORT_CONTROL(base) __REG32(base, 0x00000200) -#define PORT_CONTROL_PRI (0x00000001) -#define PORT_CONTROL_BPT (0x00010000) -#define PORT_CONTROL_SPD (0x00040000) -#define PORT_CONTROL_RBC (0x00080000) -#define PORT_CONTROL_PRB (0x00200000) -#define PORT_CONTROL_DIS (0x00400000) -#define PORT_CONTROL_TBI (0x00800000) -#define PORT_CONTROL_STE (0x10000000) -#define PORT_CONTROL_ZOR (0x20000000) -#define PORT_CONTROL_CLR (0x40000000) -#define PORT_CONTROL_SRT (0x80000000) - -#define reg_TX_CONFIG(base) __REG32(base, 0x00000220) -#define TX_CONFIG_START_Q (0x00000003) -#define TX_CONFIG_EHP (0x00400000) -#define TX_CONFIG_CHP (0x00800000) -#define TX_CONFIG_RST (0x80000000) - -#define reg_TX_CONTROL(base) __REG32(base, 0x00000224) -#define TX_CONTROL_GO (0x00008000) -#define TX_CONTROL_MP (0x01000000) -#define TX_CONTROL_EAI (0x20000000) -#define TX_CONTROL_ABT (0x40000000) -#define TX_CONTROL_EII (0x80000000) - -#define reg_TX_STATUS(base) __REG32(base, 0x00000228) -#define TX_STATUS_QUEUE_USABLE (0x0000000f) -#define TX_STATUS_CURR_Q (0x00000300) -#define TX_STATUS_ACT (0x00008000) -#define TX_STATUS_QUEUE_IDLE (0x000f0000) -#define TX_STATUS_EOQ_PENDING (0x0f000000) - -#define reg_TX_EXTENDED_STATUS(base) __REG32(base, 0x0000022c) -#define TX_EXTENDED_STATUS_END_OF_QUEUE_CONDITION (0x0000000f) -#define TX_EXTENDED_STATUS_END_OF_FRAME_CONDITION (0x00000f00) -#define TX_EXTENDED_STATUS_DESCRIPTOR_INTERRUPT_CONDITION (0x000f0000) -#define TX_EXTENDED_STATUS_ERROR_FLAG (0x0f000000) - -#define reg_TX_THRESHOLDS(base) __REG32(base, 0x00000230) +#define reg_MAC_CONFIG_1(base) __REG32(base, 0x00000000) +#define MAC_CONFIG_1_TX_ENABLE (0x00000001) +#define MAC_CONFIG_1_SYNC_TX_ENABLE (0x00000002) +#define MAC_CONFIG_1_RX_ENABLE (0x00000004) +#define MAC_CONFIG_1_SYNC_RX_ENABLE (0x00000008) +#define MAC_CONFIG_1_TX_FLOW_CONTROL (0x00000010) +#define MAC_CONFIG_1_RX_FLOW_CONTROL (0x00000020) +#define MAC_CONFIG_1_LOOP_BACK (0x00000100) +#define MAC_CONFIG_1_RESET_TX_FUNCTION (0x00010000) +#define MAC_CONFIG_1_RESET_RX_FUNCTION (0x00020000) +#define MAC_CONFIG_1_RESET_TX_MAC (0x00040000) +#define MAC_CONFIG_1_RESET_RX_MAC (0x00080000) +#define MAC_CONFIG_1_SIM_RESET (0x40000000) +#define MAC_CONFIG_1_SOFT_RESET (0x80000000) + +#define reg_MAC_CONFIG_2(base) __REG32(base, 0x00000004) +#define MAC_CONFIG_2_FULL_DUPLEX (0x00000001) +#define MAC_CONFIG_2_CRC_ENABLE (0x00000002) +#define MAC_CONFIG_2_PAD_CRC (0x00000004) +#define MAC_CONFIG_2_LENGTH_CHECK (0x00000010) +#define MAC_CONFIG_2_HUGE_FRAME (0x00000020) +#define MAC_CONFIG_2_INTERFACE_MODE(val) (((val) & 0x3) << 8) +#define MAC_CONFIG_2_PREAMBLE_LENGTH(val) (((val) & 0xf) << 12) +#define INTERFACE_MODE_NIBBLE 1 /* 10/100 Mb/s MII) */ +#define INTERFACE_MODE_BYTE 2 /* 1000 Mb/s GMII/TBI */ + +#define reg_MAXIMUM_FRAME_LENGTH(base) __REG32(base, 0x00000010) + +#define reg_MII_MGMT_CONFIG(base) __REG32(base, 0x00000020) +#define MII_MGMT_CONFIG_MGMT_CLOCK_SELECT(val) ((val) & 0x7) +#define MII_MGMT_CONFIG_NO_PREAMBLE (0x00000010) +#define MII_MGMT_CONFIG_SCAN_INCREMENT (0x00000020) +#define MII_MGMT_CONFIG_RESET_MGMT (0x80000000) + +#define reg_MII_MGMT_COMMAND(base) __REG32(base, 0x00000024) +#define MII_MGMT_COMMAND_READ_CYCLE (0x00000001) +#define MII_MGMT_COMMAND_SCAN_CYCLE (0x00000002) + +#define reg_MII_MGMT_ADDRESS(base) __REG32(base, 0x00000028) +#define reg_MII_MGMT_CONTROL(base) __REG32(base, 0x0000002c) +#define reg_MII_MGMT_STATUS(base) __REG32(base, 0x00000030) + +#define reg_MII_MGMT_INDICATORS(base) __REG32(base, 0x00000034) +#define MII_MGMT_INDICATORS_BUSY (0x00000001) +#define MII_MGMT_INDICATORS_SCAN (0x00000002) +#define MII_MGMT_INDICATORS_NOT_VALID (0x00000004) + +#define reg_INTERFACE_STATUS(base) __REG32(base, 0x0000003c) +#define INTERFACE_STATUS_LINK_FAIL (0x00000008) +#define INTERFACE_STATUS_EXCESS_DEFER (0x00000200) + +#define reg_STATION_ADDRESS_1(base) __REG32(base, 0x00000040) +#define reg_STATION_ADDRESS_2(base) __REG32(base, 0x00000044) + +#define reg_PORT_CONTROL(base) __REG32(base, 0x00000200) +#define PORT_CONTROL_PRI (0x00000001) +#define PORT_CONTROL_BPT (0x00010000) +#define PORT_CONTROL_SPD (0x00040000) +#define PORT_CONTROL_RBC (0x00080000) +#define PORT_CONTROL_PRB (0x00200000) +#define PORT_CONTROL_DIS (0x00400000) +#define PORT_CONTROL_TBI (0x00800000) +#define PORT_CONTROL_STE (0x10000000) +#define PORT_CONTROL_ZOR (0x20000000) +#define PORT_CONTROL_CLR (0x40000000) +#define PORT_CONTROL_SRT (0x80000000) + +#define reg_TX_CONFIG(base) __REG32(base, 0x00000220) +#define TX_CONFIG_START_Q (0x00000003) +#define TX_CONFIG_EHP (0x00400000) +#define TX_CONFIG_CHP (0x00800000) +#define TX_CONFIG_RST (0x80000000) + +#define reg_TX_CONTROL(base) __REG32(base, 0x00000224) +#define TX_CONTROL_GO (0x00008000) +#define TX_CONTROL_MP (0x01000000) +#define TX_CONTROL_EAI (0x20000000) +#define TX_CONTROL_ABT (0x40000000) +#define TX_CONTROL_EII (0x80000000) + +#define reg_TX_STATUS(base) __REG32(base, 0x00000228) +#define TX_STATUS_QUEUE_USABLE (0x0000000f) +#define TX_STATUS_CURR_Q (0x00000300) +#define TX_STATUS_ACT (0x00008000) +#define TX_STATUS_QUEUE_IDLE (0x000f0000) +#define TX_STATUS_EOQ_PENDING (0x0f000000) + +#define reg_TX_EXTENDED_STATUS(base) __REG32(base, 0x0000022c) +#define TX_EXTENDED_STATUS_END_OF_QUEUE_CONDITION (0x0000000f) +#define TX_EXTENDED_STATUS_END_OF_FRAME_CONDITION (0x00000f00) +#define TX_EXTENDED_STATUS_DESCRIPTOR_INTERRUPT_CONDITION (0x000f0000) +#define TX_EXTENDED_STATUS_ERROR_FLAG (0x0f000000) + +#define reg_TX_THRESHOLDS(base) __REG32(base, 0x00000230) #define reg_TX_DIAGNOSTIC_ADDR(base) __REG32(base, 0x00000270) -#define TX_DIAGNOSTIC_ADDR_INDEX (0x0000007f) -#define TX_DIAGNOSTIC_ADDR_DFR (0x40000000) -#define TX_DIAGNOSTIC_ADDR_AI (0x80000000) - -#define reg_TX_DIAGNOSTIC_DATA(base) __REG32(base, 0x00000274) - -#define reg_TX_ERROR_STATUS(base) __REG32(base, 0x00000278) -#define TX_ERROR_STATUS (0x00000278) -#define TX_ERROR_STATUS_QUEUE_0_ERROR_RESPONSE (0x0000000f) -#define TX_ERROR_STATUS_TEA_ON_QUEUE_0 (0x00000010) -#define TX_ERROR_STATUS_RER_ON_QUEUE_0 (0x00000020) -#define TX_ERROR_STATUS_TER_ON_QUEUE_0 (0x00000040) -#define TX_ERROR_STATUS_DER_ON_QUEUE_0 (0x00000080) -#define TX_ERROR_STATUS_QUEUE_1_ERROR_RESPONSE (0x00000f00) -#define TX_ERROR_STATUS_TEA_ON_QUEUE_1 (0x00001000) -#define TX_ERROR_STATUS_RER_ON_QUEUE_1 (0x00002000) -#define TX_ERROR_STATUS_TER_ON_QUEUE_1 (0x00004000) -#define TX_ERROR_STATUS_DER_ON_QUEUE_1 (0x00008000) -#define TX_ERROR_STATUS_QUEUE_2_ERROR_RESPONSE (0x000f0000) -#define TX_ERROR_STATUS_TEA_ON_QUEUE_2 (0x00100000) -#define TX_ERROR_STATUS_RER_ON_QUEUE_2 (0x00200000) -#define TX_ERROR_STATUS_TER_ON_QUEUE_2 (0x00400000) -#define TX_ERROR_STATUS_DER_ON_QUEUE_2 (0x00800000) -#define TX_ERROR_STATUS_QUEUE_3_ERROR_RESPONSE (0x0f000000) -#define TX_ERROR_STATUS_TEA_ON_QUEUE_3 (0x10000000) -#define TX_ERROR_STATUS_RER_ON_QUEUE_3 (0x20000000) -#define TX_ERROR_STATUS_TER_ON_QUEUE_3 (0x40000000) -#define TX_ERROR_STATUS_DER_ON_QUEUE_3 (0x80000000) - -#define reg_TX_QUEUE_0_CONFIG(base) __REG32(base, 0x00000280) -#define TX_QUEUE_0_CONFIG_OCN_PORT (0x0000003f) -#define TX_QUEUE_0_CONFIG_BSWP (0x00000400) -#define TX_QUEUE_0_CONFIG_WSWP (0x00000800) -#define TX_QUEUE_0_CONFIG_AM (0x00004000) -#define TX_QUEUE_0_CONFIG_GVI (0x00008000) -#define TX_QUEUE_0_CONFIG_EEI (0x00010000) -#define TX_QUEUE_0_CONFIG_ELI (0x00020000) -#define TX_QUEUE_0_CONFIG_ENI (0x00040000) -#define TX_QUEUE_0_CONFIG_ESI (0x00080000) -#define TX_QUEUE_0_CONFIG_EDI (0x00100000) - -#define reg_TX_QUEUE_0_BUF_CONFIG(base) __REG32(base, 0x00000284) -#define TX_QUEUE_0_BUF_CONFIG_OCN_PORT (0x0000003f) -#define TX_QUEUE_0_BUF_CONFIG_BURST (0x00000300) -#define TX_QUEUE_0_BUF_CONFIG_BSWP (0x00000400) -#define TX_QUEUE_0_BUF_CONFIG_WSWP (0x00000800) - -#define OCN_PORT_HLP 0 /* HLP Interface */ -#define OCN_PORT_PCI_X 1 /* PCI-X Interface */ +#define TX_DIAGNOSTIC_ADDR_INDEX (0x0000007f) +#define TX_DIAGNOSTIC_ADDR_DFR (0x40000000) +#define TX_DIAGNOSTIC_ADDR_AI (0x80000000) + +#define reg_TX_DIAGNOSTIC_DATA(base) __REG32(base, 0x00000274) + +#define reg_TX_ERROR_STATUS(base) __REG32(base, 0x00000278) +#define TX_ERROR_STATUS (0x00000278) +#define TX_ERROR_STATUS_QUEUE_0_ERROR_RESPONSE (0x0000000f) +#define TX_ERROR_STATUS_TEA_ON_QUEUE_0 (0x00000010) +#define TX_ERROR_STATUS_RER_ON_QUEUE_0 (0x00000020) +#define TX_ERROR_STATUS_TER_ON_QUEUE_0 (0x00000040) +#define TX_ERROR_STATUS_DER_ON_QUEUE_0 (0x00000080) +#define TX_ERROR_STATUS_QUEUE_1_ERROR_RESPONSE (0x00000f00) +#define TX_ERROR_STATUS_TEA_ON_QUEUE_1 (0x00001000) +#define TX_ERROR_STATUS_RER_ON_QUEUE_1 (0x00002000) +#define TX_ERROR_STATUS_TER_ON_QUEUE_1 (0x00004000) +#define TX_ERROR_STATUS_DER_ON_QUEUE_1 (0x00008000) +#define TX_ERROR_STATUS_QUEUE_2_ERROR_RESPONSE (0x000f0000) +#define TX_ERROR_STATUS_TEA_ON_QUEUE_2 (0x00100000) +#define TX_ERROR_STATUS_RER_ON_QUEUE_2 (0x00200000) +#define TX_ERROR_STATUS_TER_ON_QUEUE_2 (0x00400000) +#define TX_ERROR_STATUS_DER_ON_QUEUE_2 (0x00800000) +#define TX_ERROR_STATUS_QUEUE_3_ERROR_RESPONSE (0x0f000000) +#define TX_ERROR_STATUS_TEA_ON_QUEUE_3 (0x10000000) +#define TX_ERROR_STATUS_RER_ON_QUEUE_3 (0x20000000) +#define TX_ERROR_STATUS_TER_ON_QUEUE_3 (0x40000000) +#define TX_ERROR_STATUS_DER_ON_QUEUE_3 (0x80000000) + +#define reg_TX_QUEUE_0_CONFIG(base) __REG32(base, 0x00000280) +#define TX_QUEUE_0_CONFIG_OCN_PORT (0x0000003f) +#define TX_QUEUE_0_CONFIG_BSWP (0x00000400) +#define TX_QUEUE_0_CONFIG_WSWP (0x00000800) +#define TX_QUEUE_0_CONFIG_AM (0x00004000) +#define TX_QUEUE_0_CONFIG_GVI (0x00008000) +#define TX_QUEUE_0_CONFIG_EEI (0x00010000) +#define TX_QUEUE_0_CONFIG_ELI (0x00020000) +#define TX_QUEUE_0_CONFIG_ENI (0x00040000) +#define TX_QUEUE_0_CONFIG_ESI (0x00080000) +#define TX_QUEUE_0_CONFIG_EDI (0x00100000) + +#define reg_TX_QUEUE_0_BUF_CONFIG(base) __REG32(base, 0x00000284) +#define TX_QUEUE_0_BUF_CONFIG_OCN_PORT (0x0000003f) +#define TX_QUEUE_0_BUF_CONFIG_BURST (0x00000300) +#define TX_QUEUE_0_BUF_CONFIG_BSWP (0x00000400) +#define TX_QUEUE_0_BUF_CONFIG_WSWP (0x00000800) + +#define OCN_PORT_HLP 0 /* HLP Interface */ +#define OCN_PORT_PCI_X 1 /* PCI-X Interface */ #define OCN_PORT_PROCESSOR_MASTER 2 /* Processor Interface (master) */ -#define OCN_PORT_PROCESSOR_SLAVE 3 /* Processor Interface (slave) */ -#define OCN_PORT_MEMORY 4 /* Memory Controller */ -#define OCN_PORT_DMA 5 /* DMA Controller */ -#define OCN_PORT_ETHERNET 6 /* Ethernet Controller */ -#define OCN_PORT_PRINT 7 /* Print Engine Interface */ - -#define reg_TX_QUEUE_0_PTR_LOW(base) __REG32(base, 0x00000288) - -#define reg_TX_QUEUE_0_PTR_HIGH(base) __REG32(base, 0x0000028c) -#define TX_QUEUE_0_PTR_HIGH_VALID (0x80000000) - -#define reg_RX_CONFIG(base) __REG32(base, 0x00000320) -#define RX_CONFIG_DEF_Q (0x00000003) -#define RX_CONFIG_EMF (0x00000100) -#define RX_CONFIG_EUF (0x00000200) -#define RX_CONFIG_BFE (0x00000400) -#define RX_CONFIG_MFE (0x00000800) -#define RX_CONFIG_UFE (0x00001000) -#define RX_CONFIG_SE (0x00002000) -#define RX_CONFIG_ABF (0x00200000) -#define RX_CONFIG_APE (0x00400000) -#define RX_CONFIG_CHP (0x00800000) -#define RX_CONFIG_RST (0x80000000) - -#define reg_RX_CONTROL(base) __REG32(base, 0x00000324) -#define GE_E0_RX_CONTROL_QUEUE_ENABLES (0x0000000f) -#define GE_E0_RX_CONTROL_GO (0x00008000) -#define GE_E0_RX_CONTROL_EAI (0x20000000) -#define GE_E0_RX_CONTROL_ABT (0x40000000) -#define GE_E0_RX_CONTROL_EII (0x80000000) - -#define reg_RX_EXTENDED_STATUS(base) __REG32(base, 0x0000032c) -#define RX_EXTENDED_STATUS (0x0000032c) -#define RX_EXTENDED_STATUS_EOQ (0x0000000f) -#define RX_EXTENDED_STATUS_EOQ_0 (0x00000001) -#define RX_EXTENDED_STATUS_EOF (0x00000f00) -#define RX_EXTENDED_STATUS_DESCRIPTOR_INTERRUPT_CONDITION (0x000f0000) -#define RX_EXTENDED_STATUS_ERROR_FLAG (0x0f000000) - -#define reg_RX_THRESHOLDS(base) __REG32(base, 0x00000330) - -#define reg_RX_DIAGNOSTIC_ADDR(base) __REG32(base, 0x00000370) -#define RX_DIAGNOSTIC_ADDR_INDEX (0x0000007f) -#define RX_DIAGNOSTIC_ADDR_DFR (0x40000000) -#define RX_DIAGNOSTIC_ADDR_AI (0x80000000) - -#define reg_RX_DIAGNOSTIC_DATA(base) __REG32(base, 0x00000374) - -#define reg_RX_QUEUE_0_CONFIG(base) __REG32(base, 0x00000380) -#define RX_QUEUE_0_CONFIG_OCN_PORT (0x0000003f) -#define RX_QUEUE_0_CONFIG_BSWP (0x00000400) -#define RX_QUEUE_0_CONFIG_WSWP (0x00000800) -#define RX_QUEUE_0_CONFIG_AM (0x00004000) -#define RX_QUEUE_0_CONFIG_EEI (0x00010000) -#define RX_QUEUE_0_CONFIG_ELI (0x00020000) -#define RX_QUEUE_0_CONFIG_ENI (0x00040000) -#define RX_QUEUE_0_CONFIG_ESI (0x00080000) -#define RX_QUEUE_0_CONFIG_EDI (0x00100000) - -#define reg_RX_QUEUE_0_BUF_CONFIG(base) __REG32(base, 0x00000384) -#define RX_QUEUE_0_BUF_CONFIG_OCN_PORT (0x0000003f) -#define RX_QUEUE_0_BUF_CONFIG_BURST (0x00000300) -#define RX_QUEUE_0_BUF_CONFIG_BSWP (0x00000400) -#define RX_QUEUE_0_BUF_CONFIG_WSWP (0x00000800) - -#define reg_RX_QUEUE_0_PTR_LOW(base) __REG32(base, 0x00000388) - -#define reg_RX_QUEUE_0_PTR_HIGH(base) __REG32(base, 0x0000038c) -#define RX_QUEUE_0_PTR_HIGH_VALID (0x80000000) +#define OCN_PORT_PROCESSOR_SLAVE 3 /* Processor Interface (slave) */ +#define OCN_PORT_MEMORY 4 /* Memory Controller */ +#define OCN_PORT_DMA 5 /* DMA Controller */ +#define OCN_PORT_ETHERNET 6 /* Ethernet Controller */ +#define OCN_PORT_PRINT 7 /* Print Engine Interface */ + +#define reg_TX_QUEUE_0_PTR_LOW(base) __REG32(base, 0x00000288) + +#define reg_TX_QUEUE_0_PTR_HIGH(base) __REG32(base, 0x0000028c) +#define TX_QUEUE_0_PTR_HIGH_VALID (0x80000000) + +#define reg_RX_CONFIG(base) __REG32(base, 0x00000320) +#define RX_CONFIG_DEF_Q (0x00000003) +#define RX_CONFIG_EMF (0x00000100) +#define RX_CONFIG_EUF (0x00000200) +#define RX_CONFIG_BFE (0x00000400) +#define RX_CONFIG_MFE (0x00000800) +#define RX_CONFIG_UFE (0x00001000) +#define RX_CONFIG_SE (0x00002000) +#define RX_CONFIG_ABF (0x00200000) +#define RX_CONFIG_APE (0x00400000) +#define RX_CONFIG_CHP (0x00800000) +#define RX_CONFIG_RST (0x80000000) + +#define reg_RX_CONTROL(base) __REG32(base, 0x00000324) +#define GE_E0_RX_CONTROL_QUEUE_ENABLES (0x0000000f) +#define GE_E0_RX_CONTROL_GO (0x00008000) +#define GE_E0_RX_CONTROL_EAI (0x20000000) +#define GE_E0_RX_CONTROL_ABT (0x40000000) +#define GE_E0_RX_CONTROL_EII (0x80000000) + +#define reg_RX_EXTENDED_STATUS(base) __REG32(base, 0x0000032c) +#define RX_EXTENDED_STATUS (0x0000032c) +#define RX_EXTENDED_STATUS_EOQ (0x0000000f) +#define RX_EXTENDED_STATUS_EOQ_0 (0x00000001) +#define RX_EXTENDED_STATUS_EOF (0x00000f00) +#define RX_EXTENDED_STATUS_DESCRIPTOR_INTERRUPT_CONDITION (0x000f0000) +#define RX_EXTENDED_STATUS_ERROR_FLAG (0x0f000000) + +#define reg_RX_THRESHOLDS(base) __REG32(base, 0x00000330) + +#define reg_RX_DIAGNOSTIC_ADDR(base) __REG32(base, 0x00000370) +#define RX_DIAGNOSTIC_ADDR_INDEX (0x0000007f) +#define RX_DIAGNOSTIC_ADDR_DFR (0x40000000) +#define RX_DIAGNOSTIC_ADDR_AI (0x80000000) + +#define reg_RX_DIAGNOSTIC_DATA(base) __REG32(base, 0x00000374) + +#define reg_RX_QUEUE_0_CONFIG(base) __REG32(base, 0x00000380) +#define RX_QUEUE_0_CONFIG_OCN_PORT (0x0000003f) +#define RX_QUEUE_0_CONFIG_BSWP (0x00000400) +#define RX_QUEUE_0_CONFIG_WSWP (0x00000800) +#define RX_QUEUE_0_CONFIG_AM (0x00004000) +#define RX_QUEUE_0_CONFIG_EEI (0x00010000) +#define RX_QUEUE_0_CONFIG_ELI (0x00020000) +#define RX_QUEUE_0_CONFIG_ENI (0x00040000) +#define RX_QUEUE_0_CONFIG_ESI (0x00080000) +#define RX_QUEUE_0_CONFIG_EDI (0x00100000) + +#define reg_RX_QUEUE_0_BUF_CONFIG(base) __REG32(base, 0x00000384) +#define RX_QUEUE_0_BUF_CONFIG_OCN_PORT (0x0000003f) +#define RX_QUEUE_0_BUF_CONFIG_BURST (0x00000300) +#define RX_QUEUE_0_BUF_CONFIG_BSWP (0x00000400) +#define RX_QUEUE_0_BUF_CONFIG_WSWP (0x00000800) + +#define reg_RX_QUEUE_0_PTR_LOW(base) __REG32(base, 0x00000388) + +#define reg_RX_QUEUE_0_PTR_HIGH(base) __REG32(base, 0x0000038c) +#define RX_QUEUE_0_PTR_HIGH_VALID (0x80000000) /* * PHY register definitions */ /* the first 15 PHY registers are standard. */ -#define PHY_CTRL_REG 0 /* Control Register */ -#define PHY_STATUS_REG 1 /* Status Regiser */ -#define PHY_ID1_REG 2 /* Phy Id Reg (word 1) */ -#define PHY_ID2_REG 3 /* Phy Id Reg (word 2) */ -#define PHY_AN_ADV_REG 4 /* Autoneg Advertisement */ -#define PHY_LP_ABILITY_REG 5 /* Link Partner Ability (Base Page) */ -#define PHY_AUTONEG_EXP_REG 6 /* Autoneg Expansion Reg */ -#define PHY_NEXT_PAGE_TX_REG 7 /* Next Page TX */ -#define PHY_LP_NEXT_PAGE_REG 8 /* Link Partner Next Page */ -#define PHY_1000T_CTRL_REG 9 /* 1000Base-T Control Reg */ -#define PHY_1000T_STATUS_REG 10 /* 1000Base-T Status Reg */ -#define PHY_EXT_STATUS_REG 11 /* Extended Status Reg */ +#define PHY_CTRL_REG 0 /* Control Register */ +#define PHY_STATUS_REG 1 /* Status Regiser */ +#define PHY_ID1_REG 2 /* Phy Id Reg (word 1) */ +#define PHY_ID2_REG 3 /* Phy Id Reg (word 2) */ +#define PHY_AN_ADV_REG 4 /* Autoneg Advertisement */ +#define PHY_LP_ABILITY_REG 5 /* Link Partner Ability (Base Page) */ +#define PHY_AUTONEG_EXP_REG 6 /* Autoneg Expansion Reg */ +#define PHY_NEXT_PAGE_TX_REG 7 /* Next Page TX */ +#define PHY_LP_NEXT_PAGE_REG 8 /* Link Partner Next Page */ +#define PHY_1000T_CTRL_REG 9 /* 1000Base-T Control Reg */ +#define PHY_1000T_STATUS_REG 10 /* 1000Base-T Status Reg */ +#define PHY_EXT_STATUS_REG 11 /* Extended Status Reg */ /* * PHY Register bit masks. */ -#define PHY_CTRL_RESET (1 << 15) -#define PHY_CTRL_LOOPBACK (1 << 14) -#define PHY_CTRL_SPEED0 (1 << 13) -#define PHY_CTRL_AN_EN (1 << 12) -#define PHY_CTRL_PWR_DN (1 << 11) -#define PHY_CTRL_ISOLATE (1 << 10) -#define PHY_CTRL_RESTART_AN (1 << 9) -#define PHY_CTRL_FULL_DUPLEX (1 << 8) -#define PHY_CTRL_CT_EN (1 << 7) -#define PHY_CTRL_SPEED1 (1 << 6) - -#define PHY_STAT_100BASE_T4 (1 << 15) -#define PHY_STAT_100BASE_X_FD (1 << 14) -#define PHY_STAT_100BASE_X_HD (1 << 13) -#define PHY_STAT_10BASE_T_FD (1 << 12) -#define PHY_STAT_10BASE_T_HD (1 << 11) -#define PHY_STAT_100BASE_T2_FD (1 << 10) -#define PHY_STAT_100BASE_T2_HD (1 << 9) -#define PHY_STAT_EXT_STAT (1 << 8) -#define PHY_STAT_RESERVED (1 << 7) -#define PHY_STAT_MFPS (1 << 6) /* Management Frames Preamble Suppression */ -#define PHY_STAT_AN_COMPLETE (1 << 5) -#define PHY_STAT_REM_FAULT (1 << 4) -#define PHY_STAT_AN_CAP (1 << 3) -#define PHY_STAT_LINK_UP (1 << 2) -#define PHY_STAT_JABBER (1 << 1) -#define PHY_STAT_EXT_CAP (1 << 0) - -#define TBI_CONTROL_2 0x11 -#define TBI_CONTROL_2_ENABLE_COMMA_DETECT 0x0001 -#define TBI_CONTROL_2_ENABLE_WRAP 0x0002 -#define TBI_CONTROL_2_G_MII_MODE 0x0010 -#define TBI_CONTROL_2_RECEIVE_CLOCK_SELECT 0x0020 -#define TBI_CONTROL_2_AUTO_NEGOTIATION_SENSE 0x0100 -#define TBI_CONTROL_2_DISABLE_TRANSMIT_RUNNING_DISPARITY 0x1000 -#define TBI_CONTROL_2_DISABLE_RECEIVE_RUNNING_DISPARITY 0x2000 -#define TBI_CONTROL_2_SHORTCUT_LINK_TIMER 0x4000 -#define TBI_CONTROL_2_SOFT_RESET 0x8000 +#define PHY_CTRL_RESET (1 << 15) +#define PHY_CTRL_LOOPBACK (1 << 14) +#define PHY_CTRL_SPEED0 (1 << 13) +#define PHY_CTRL_AN_EN (1 << 12) +#define PHY_CTRL_PWR_DN (1 << 11) +#define PHY_CTRL_ISOLATE (1 << 10) +#define PHY_CTRL_RESTART_AN (1 << 9) +#define PHY_CTRL_FULL_DUPLEX (1 << 8) +#define PHY_CTRL_CT_EN (1 << 7) +#define PHY_CTRL_SPEED1 (1 << 6) + +#define PHY_STAT_100BASE_T4 (1 << 15) +#define PHY_STAT_100BASE_X_FD (1 << 14) +#define PHY_STAT_100BASE_X_HD (1 << 13) +#define PHY_STAT_10BASE_T_FD (1 << 12) +#define PHY_STAT_10BASE_T_HD (1 << 11) +#define PHY_STAT_100BASE_T2_FD (1 << 10) +#define PHY_STAT_100BASE_T2_HD (1 << 9) +#define PHY_STAT_EXT_STAT (1 << 8) +#define PHY_STAT_RESERVED (1 << 7) +#define PHY_STAT_MFPS (1 << 6) /* Management Frames Preamble Suppression */ +#define PHY_STAT_AN_COMPLETE (1 << 5) +#define PHY_STAT_REM_FAULT (1 << 4) +#define PHY_STAT_AN_CAP (1 << 3) +#define PHY_STAT_LINK_UP (1 << 2) +#define PHY_STAT_JABBER (1 << 1) +#define PHY_STAT_EXT_CAP (1 << 0) + +#define TBI_CONTROL_2 0x11 +#define TBI_CONTROL_2_ENABLE_COMMA_DETECT 0x0001 +#define TBI_CONTROL_2_ENABLE_WRAP 0x0002 +#define TBI_CONTROL_2_G_MII_MODE 0x0010 +#define TBI_CONTROL_2_RECEIVE_CLOCK_SELECT 0x0020 +#define TBI_CONTROL_2_AUTO_NEGOTIATION_SENSE 0x0100 +#define TBI_CONTROL_2_DISABLE_TRANSMIT_RUNNING_DISPARITY 0x1000 +#define TBI_CONTROL_2_DISABLE_RECEIVE_RUNNING_DISPARITY 0x2000 +#define TBI_CONTROL_2_SHORTCUT_LINK_TIMER 0x4000 +#define TBI_CONTROL_2_SOFT_RESET 0x8000 /* marvel specific */ -#define MV1111_EXT_CTRL1_REG 16 /* PHY Specific Control Reg */ -#define MV1111_SPEC_STAT_REG 17 /* PHY Specific Status Reg */ -#define MV1111_EXT_CTRL2_REG 20 /* Extended PHY Specific Control Reg */ +#define MV1111_EXT_CTRL1_REG 16 /* PHY Specific Control Reg */ +#define MV1111_SPEC_STAT_REG 17 /* PHY Specific Status Reg */ +#define MV1111_EXT_CTRL2_REG 20 /* Extended PHY Specific Control Reg */ /* * MARVELL 88E1111 PHY register bit masks */ /* PHY Specific Status Register (MV1111_EXT_CTRL1_REG) */ -#define SPEC_STAT_SPEED_MASK (3 << 14) -#define SPEC_STAT_FULL_DUP (1 << 13) -#define SPEC_STAT_PAGE_RCVD (1 << 12) -#define SPEC_STAT_RESOLVED (1 << 11) /* Speed and Duplex Resolved */ -#define SPEC_STAT_LINK_UP (1 << 10) -#define SPEC_STAT_CABLE_LEN_MASK (7 << 7) /* Cable Length (100/1000 modes only) */ -#define SPEC_STAT_MDIX (1 << 6) -#define SPEC_STAT_POLARITY (1 << 1) -#define SPEC_STAT_JABBER (1 << 0) +#define SPEC_STAT_SPEED_MASK (3 << 14) +#define SPEC_STAT_FULL_DUP (1 << 13) +#define SPEC_STAT_PAGE_RCVD (1 << 12) +#define SPEC_STAT_RESOLVED (1 << 11) /* Speed and Duplex Resolved */ +#define SPEC_STAT_LINK_UP (1 << 10) +#define SPEC_STAT_CABLE_LEN_MASK (7 << 7)/* Cable Length (100/1000 modes only) */ +#define SPEC_STAT_MDIX (1 << 6) +#define SPEC_STAT_POLARITY (1 << 1) +#define SPEC_STAT_JABBER (1 << 0) -#define SPEED_1000 (2 << 14) -#define SPEED_100 (1 << 14) -#define SPEED_10 (0 << 14) +#define SPEED_1000 (2 << 14) +#define SPEED_100 (1 << 14) +#define SPEED_10 (0 << 14) -#define TBI_ADDR 0x1E /* Ten Bit Interface address */ +#define TBI_ADDR 0x1E /* Ten Bit Interface address */ /* negotiated link parameters */ -#define LINK_SPEED_UNKNOWN 0 -#define LINK_SPEED_10 1 -#define LINK_SPEED_100 2 -#define LINK_SPEED_1000 3 +#define LINK_SPEED_UNKNOWN 0 +#define LINK_SPEED_10 1 +#define LINK_SPEED_100 2 +#define LINK_SPEED_1000 3 -#define LINK_DUPLEX_UNKNOWN 0 -#define LINK_DUPLEX_HALF 1 -#define LINK_DUPLEX_FULL 2 +#define LINK_DUPLEX_UNKNOWN 0 +#define LINK_DUPLEX_HALF 1 +#define LINK_DUPLEX_FULL 2 static unsigned int phy_address[] = { 8, 9 }; @@ -390,56 +392,56 @@ struct dma_descriptor { }; /* last next descriptor address flag */ -#define DMA_DESCR_LAST (1 << 31) +#define DMA_DESCR_LAST (1 << 31) /* TX DMA descriptor config status bits */ -#define DMA_DESCR_TX_EOF (1 << 0) /* end of frame */ -#define DMA_DESCR_TX_SOF (1 << 1) /* start of frame */ -#define DMA_DESCR_TX_PFVLAN (1 << 2) -#define DMA_DESCR_TX_HUGE (1 << 3) -#define DMA_DESCR_TX_PAD (1 << 4) -#define DMA_DESCR_TX_CRC (1 << 5) -#define DMA_DESCR_TX_DESCR_INT (1 << 14) -#define DMA_DESCR_TX_RETRY_COUNT 0x000F0000 -#define DMA_DESCR_TX_ONE_COLLISION (1 << 20) -#define DMA_DESCR_TX_LATE_COLLISION (1 << 24) -#define DMA_DESCR_TX_UNDERRUN (1 << 25) -#define DMA_DESCR_TX_RETRY_LIMIT (1 << 26) -#define DMA_DESCR_TX_OK (1 << 30) -#define DMA_DESCR_TX_OWNER (1 << 31) +#define DMA_DESCR_TX_EOF (1 << 0) /* end of frame */ +#define DMA_DESCR_TX_SOF (1 << 1) /* start of frame */ +#define DMA_DESCR_TX_PFVLAN (1 << 2) +#define DMA_DESCR_TX_HUGE (1 << 3) +#define DMA_DESCR_TX_PAD (1 << 4) +#define DMA_DESCR_TX_CRC (1 << 5) +#define DMA_DESCR_TX_DESCR_INT (1 << 14) +#define DMA_DESCR_TX_RETRY_COUNT 0x000F0000 +#define DMA_DESCR_TX_ONE_COLLISION (1 << 20) +#define DMA_DESCR_TX_LATE_COLLISION (1 << 24) +#define DMA_DESCR_TX_UNDERRUN (1 << 25) +#define DMA_DESCR_TX_RETRY_LIMIT (1 << 26) +#define DMA_DESCR_TX_OK (1 << 30) +#define DMA_DESCR_TX_OWNER (1 << 31) /* RX DMA descriptor status bits */ -#define DMA_DESCR_RX_EOF (1 << 0) -#define DMA_DESCR_RX_SOF (1 << 1) -#define DMA_DESCR_RX_VTF (1 << 2) -#define DMA_DESCR_RX_FRAME_IS_TYPE (1 << 3) -#define DMA_DESCR_RX_SHORT_FRAME (1 << 4) -#define DMA_DESCR_RX_HASH_MATCH (1 << 7) -#define DMA_DESCR_RX_BAD_FRAME (1 << 8) -#define DMA_DESCR_RX_OVERRUN (1 << 9) -#define DMA_DESCR_RX_MAX_FRAME_LEN (1 << 11) -#define DMA_DESCR_RX_CRC_ERROR (1 << 12) -#define DMA_DESCR_RX_DESCR_INT (1 << 13) -#define DMA_DESCR_RX_OWNER (1 << 15) - -#define RX_BUFFER_SIZE PKTSIZE -#define NUM_RX_DESC PKTBUFSRX +#define DMA_DESCR_RX_EOF (1 << 0) +#define DMA_DESCR_RX_SOF (1 << 1) +#define DMA_DESCR_RX_VTF (1 << 2) +#define DMA_DESCR_RX_FRAME_IS_TYPE (1 << 3) +#define DMA_DESCR_RX_SHORT_FRAME (1 << 4) +#define DMA_DESCR_RX_HASH_MATCH (1 << 7) +#define DMA_DESCR_RX_BAD_FRAME (1 << 8) +#define DMA_DESCR_RX_OVERRUN (1 << 9) +#define DMA_DESCR_RX_MAX_FRAME_LEN (1 << 11) +#define DMA_DESCR_RX_CRC_ERROR (1 << 12) +#define DMA_DESCR_RX_DESCR_INT (1 << 13) +#define DMA_DESCR_RX_OWNER (1 << 15) + +#define RX_BUFFER_SIZE PKTSIZE +#define NUM_RX_DESC PKTBUFSRX static struct dma_descriptor tx_descriptor __attribute__ ((aligned(32))); static struct dma_descriptor rx_descr_array[NUM_RX_DESC] - __attribute__ ((aligned(32))); + __attribute__ ((aligned(32))); static struct dma_descriptor *rx_descr_current; -static int tsi108_eth_probe(struct eth_device *dev, bd_t * bis); -static int tsi108_eth_send(struct eth_device *dev, +static int tsi108_eth_probe (struct eth_device *dev, bd_t * bis); +static int tsi108_eth_send (struct eth_device *dev, volatile void *packet, int length); -static int tsi108_eth_recv(struct eth_device *dev); -static void tsi108_eth_halt(struct eth_device *dev); -static unsigned int read_phy(unsigned int base, +static int tsi108_eth_recv (struct eth_device *dev); +static void tsi108_eth_halt (struct eth_device *dev); +static unsigned int read_phy (unsigned int base, unsigned int phy_addr, unsigned int phy_reg); -static void write_phy(unsigned int base, +static void write_phy (unsigned int base, unsigned int phy_addr, unsigned int phy_reg, unsigned int phy_data); @@ -447,15 +449,15 @@ static void write_phy(unsigned int base, /* * print phy debug infomation */ -static void dump_phy_regs(unsigned int phy_addr) +static void dump_phy_regs (unsigned int phy_addr) { int i; - printf("PHY %d registers\n", phy_addr); + printf ("PHY %d registers\n", phy_addr); for (i = 0; i <= 30; i++) { - printf("%2d 0x%04x\n", i, read_phy(ETH_BASE, phy_addr, i)); + printf ("%2d 0x%04x\n", i, read_phy (ETH_BASE, phy_addr, i)); } - printf("\n"); + printf ("\n"); } #else @@ -466,27 +468,27 @@ static void dump_phy_regs(unsigned int phy_addr) /* * print debug infomation */ -static void tx_diag_regs(unsigned int base) +static void tx_diag_regs (unsigned int base) { int i; unsigned long dummy; - printf("TX diagnostics registers\n"); + printf ("TX diagnostics registers\n"); reg_TX_DIAGNOSTIC_ADDR(base) = 0x00 | TX_DIAGNOSTIC_ADDR_AI; - udelay(1000); + udelay (1000); dummy = reg_TX_DIAGNOSTIC_DATA(base); for (i = 0x00; i <= 0x05; i++) { - udelay(1000); - printf("0x%02x 0x%08x\n", i, reg_TX_DIAGNOSTIC_DATA(base)); + udelay (1000); + printf ("0x%02x 0x%08x\n", i, reg_TX_DIAGNOSTIC_DATA(base)); } reg_TX_DIAGNOSTIC_ADDR(base) = 0x40 | TX_DIAGNOSTIC_ADDR_AI; - udelay(1000); + udelay (1000); dummy = reg_TX_DIAGNOSTIC_DATA(base); for (i = 0x40; i <= 0x47; i++) { - udelay(1000); - printf("0x%02x 0x%08x\n", i, reg_TX_DIAGNOSTIC_DATA(base)); + udelay (1000); + printf ("0x%02x 0x%08x\n", i, reg_TX_DIAGNOSTIC_DATA(base)); } - printf("\n"); + printf ("\n"); } #else @@ -497,27 +499,27 @@ static void tx_diag_regs(unsigned int base) /* * print debug infomation */ -static void rx_diag_regs(unsigned int base) +static void rx_diag_regs (unsigned int base) { int i; unsigned long dummy; - printf("RX diagnostics registers\n"); + printf ("RX diagnostics registers\n"); reg_RX_DIAGNOSTIC_ADDR(base) = 0x00 | RX_DIAGNOSTIC_ADDR_AI; - udelay(1000); + udelay (1000); dummy = reg_RX_DIAGNOSTIC_DATA(base); for (i = 0x00; i <= 0x05; i++) { - udelay(1000); - printf("0x%02x 0x%08x\n", i, reg_RX_DIAGNOSTIC_DATA(base)); + udelay (1000); + printf ("0x%02x 0x%08x\n", i, reg_RX_DIAGNOSTIC_DATA(base)); } reg_RX_DIAGNOSTIC_ADDR(base) = 0x40 | RX_DIAGNOSTIC_ADDR_AI; - udelay(1000); + udelay (1000); dummy = reg_RX_DIAGNOSTIC_DATA(base); for (i = 0x08; i <= 0x0a; i++) { - udelay(1000); - printf("0x%02x 0x%08x\n", i, reg_RX_DIAGNOSTIC_DATA(base)); + udelay (1000); + printf ("0x%02x 0x%08x\n", i, reg_RX_DIAGNOSTIC_DATA(base)); } - printf("\n"); + printf ("\n"); } #else @@ -528,15 +530,15 @@ static void rx_diag_regs(unsigned int base) /* * print debug infomation */ -static void debug_mii_regs(unsigned int base) +static void debug_mii_regs (unsigned int base) { - printf("MII_MGMT_CONFIG 0x%08x\n", reg_MII_MGMT_CONFIG(base)); - printf("MII_MGMT_COMMAND 0x%08x\n", reg_MII_MGMT_COMMAND(base)); - printf("MII_MGMT_ADDRESS 0x%08x\n", reg_MII_MGMT_ADDRESS(base)); - printf("MII_MGMT_CONTROL 0x%08x\n", reg_MII_MGMT_CONTROL(base)); - printf("MII_MGMT_STATUS 0x%08x\n", reg_MII_MGMT_STATUS(base)); - printf("MII_MGMT_INDICATORS 0x%08x\n", reg_MII_MGMT_INDICATORS(base)); - printf("\n"); + printf ("MII_MGMT_CONFIG 0x%08x\n", reg_MII_MGMT_CONFIG(base)); + printf ("MII_MGMT_COMMAND 0x%08x\n", reg_MII_MGMT_COMMAND(base)); + printf ("MII_MGMT_ADDRESS 0x%08x\n", reg_MII_MGMT_ADDRESS(base)); + printf ("MII_MGMT_CONTROL 0x%08x\n", reg_MII_MGMT_CONTROL(base)); + printf ("MII_MGMT_STATUS 0x%08x\n", reg_MII_MGMT_STATUS(base)); + printf ("MII_MGMT_INDICATORS 0x%08x\n", reg_MII_MGMT_INDICATORS(base)); + printf ("\n"); } #else @@ -546,15 +548,15 @@ static void debug_mii_regs(unsigned int base) /* * Wait until the phy bus is non-busy */ -static void phy_wait(unsigned int base, unsigned int condition) +static void phy_wait (unsigned int base, unsigned int condition) { int timeout; timeout = 0; while (reg_MII_MGMT_INDICATORS(base) & condition) { - udelay(10); + udelay (10); if (++timeout > 10000) { - printf("ERROR: timeout waiting for phy bus (%d)\n", + printf ("ERROR: timeout waiting for phy bus (%d)\n", condition); break; } @@ -564,12 +566,12 @@ static void phy_wait(unsigned int base, unsigned int condition) /* * read phy register */ -static unsigned int read_phy(unsigned int base, +static unsigned int read_phy (unsigned int base, unsigned int phy_addr, unsigned int phy_reg) { unsigned int value; - phy_wait(base, MII_MGMT_INDICATORS_BUSY); + phy_wait (base, MII_MGMT_INDICATORS_BUSY); reg_MII_MGMT_ADDRESS(base) = (phy_addr << 8) | phy_reg; @@ -580,7 +582,7 @@ static unsigned int read_phy(unsigned int base, reg_MII_MGMT_COMMAND(base) = MII_MGMT_COMMAND_READ_CYCLE; /* wait for the read to complete */ - phy_wait(base, + phy_wait (base, MII_MGMT_INDICATORS_NOT_VALID | MII_MGMT_INDICATORS_BUSY); value = reg_MII_MGMT_STATUS(base); @@ -593,11 +595,11 @@ static unsigned int read_phy(unsigned int base, /* * write phy register */ -static void write_phy(unsigned int base, +static void write_phy (unsigned int base, unsigned int phy_addr, unsigned int phy_reg, unsigned int phy_data) { - phy_wait(base, MII_MGMT_INDICATORS_BUSY); + phy_wait (base, MII_MGMT_INDICATORS_BUSY); reg_MII_MGMT_ADDRESS(base) = (phy_addr << 8) | phy_reg; @@ -611,7 +613,7 @@ static void write_phy(unsigned int base, /* * configure the marvell 88e1111 phy */ -static int marvell_88e_phy_config(struct eth_device *dev, int *speed, +static int marvell_88e_phy_config (struct eth_device *dev, int *speed, int *duplex) { unsigned long base; @@ -630,40 +632,39 @@ static int marvell_88e_phy_config(struct eth_device *dev, int *speed, phy_addr = (unsigned long)dev->priv; /* Take the PHY out of reset. */ - write_phy(ETH_BASE, phy_addr, PHY_CTRL_REG, PHY_CTRL_RESET); + write_phy (ETH_BASE, phy_addr, PHY_CTRL_REG, PHY_CTRL_RESET); /* Wait for the reset process to complete. */ - udelay(10); + udelay (10); timeout = 0; while ((phy_status = - read_phy(ETH_BASE, phy_addr, PHY_CTRL_REG)) & PHY_CTRL_RESET) { - udelay(10); + read_phy (ETH_BASE, phy_addr, PHY_CTRL_REG)) & PHY_CTRL_RESET) { + udelay (10); if (++timeout > 10000) { - printf("ERROR: timeout waiting for phy reset\n"); + printf ("ERROR: timeout waiting for phy reset\n"); break; } } /* TBI Configuration. */ - write_phy(base, TBI_ADDR, TBI_CONTROL_2, TBI_CONTROL_2_G_MII_MODE | + write_phy (base, TBI_ADDR, TBI_CONTROL_2, TBI_CONTROL_2_G_MII_MODE | TBI_CONTROL_2_RECEIVE_CLOCK_SELECT); /* Wait for the link to be established. */ timeout = 0; do { - udelay(20000); - phy_status = read_phy(ETH_BASE, phy_addr, PHY_STATUS_REG); + udelay (20000); + phy_status = read_phy (ETH_BASE, phy_addr, PHY_STATUS_REG); if (++timeout > 100) { debug_lev(1, "ERROR: unable to establish link!!!\n"); break; } } while ((phy_status & PHY_STAT_LINK_UP) == 0); - if ((phy_status & PHY_STAT_LINK_UP) == 0) { + if ((phy_status & PHY_STAT_LINK_UP) == 0) return 0; - } value = 0; - phy_spec_status = read_phy(ETH_BASE, phy_addr, MV1111_SPEC_STAT_REG); + phy_spec_status = read_phy (ETH_BASE, phy_addr, MV1111_SPEC_STAT_REG); if (phy_spec_status & SPEC_STAT_RESOLVED) { switch (phy_spec_status & SPEC_STAT_SPEED_MASK) { case SPEED_1000: @@ -681,45 +682,41 @@ static int marvell_88e_phy_config(struct eth_device *dev, int *speed, if (phy_spec_status & SPEC_STAT_FULL_DUP) { phy_duplex = LINK_DUPLEX_FULL; value |= PHY_CTRL_FULL_DUPLEX; - } else { + } else phy_duplex = LINK_DUPLEX_HALF; - } } /* set TBI speed */ - write_phy(base, TBI_ADDR, PHY_CTRL_REG, value); - write_phy(base, TBI_ADDR, PHY_AN_ADV_REG, 0x0060); + write_phy (base, TBI_ADDR, PHY_CTRL_REG, value); + write_phy (base, TBI_ADDR, PHY_AN_ADV_REG, 0x0060); #if TSI108_ETH_DEBUG > 0 - printf("%s link is up", dev->name); - phy_spec_status = read_phy(ETH_BASE, phy_addr, MV1111_SPEC_STAT_REG); + printf ("%s link is up", dev->name); + phy_spec_status = read_phy (ETH_BASE, phy_addr, MV1111_SPEC_STAT_REG); if (phy_spec_status & SPEC_STAT_RESOLVED) { switch (phy_speed) { case LINK_SPEED_1000: - printf(", 1000 Mbps"); + printf (", 1000 Mbps"); break; case LINK_SPEED_100: - printf(", 100 Mbps"); + printf (", 100 Mbps"); break; case LINK_SPEED_10: - printf(", 10 Mbps"); + printf (", 10 Mbps"); break; } - if (phy_duplex == LINK_DUPLEX_FULL) { - printf(", Full duplex"); - } else { - printf(", Half duplex"); - } + if (phy_duplex == LINK_DUPLEX_FULL) + printf (", Full duplex"); + else + printf (", Half duplex"); } - printf("\n"); + printf ("\n"); #endif - dump_phy_regs(TBI_ADDR); - if (speed) { + dump_phy_regs (TBI_ADDR); + if (speed) *speed = phy_speed; - } - if (duplex) { + if (duplex) *duplex = phy_duplex; - } return 1; } @@ -729,7 +726,7 @@ static int marvell_88e_phy_config(struct eth_device *dev, int *speed, * * register the tsi108 ethernet controllers with the multi-ethernet system */ -int tsi108_eth_initialize(bd_t * bis) +int tsi108_eth_initialize (bd_t * bis) { struct eth_device *dev; int index; @@ -737,7 +734,7 @@ int tsi108_eth_initialize(bd_t * bis) for (index = 0; index < CONFIG_TSI108_ETH_NUM_PORTS; index++) { dev = (struct eth_device *)malloc(sizeof(struct eth_device)); - sprintf(dev->name, "TSI108_eth%d", index); + sprintf (dev->name, "TSI108_eth%d", index); dev->iobase = ETH_BASE + (index * ETH_PORT_OFFSET); dev->priv = (void *)(phy_address[index]); @@ -754,7 +751,7 @@ int tsi108_eth_initialize(bd_t * bis) /* * probe for and initialize a single ethernet interface */ -static int tsi108_eth_probe(struct eth_device *dev, bd_t * bis) +static int tsi108_eth_probe (struct eth_device *dev, bd_t * bis) { unsigned long base; unsigned long value; @@ -794,25 +791,23 @@ static int tsi108_eth_probe(struct eth_device *dev, bd_t * bis) reg_STATION_ADDRESS_2(base) = (dev->enetaddr[1] << 24) | (dev->enetaddr[0] << 16); - if (marvell_88e_phy_config(dev, &speed, &duplex) == 0) { + if (marvell_88e_phy_config(dev, &speed, &duplex) == 0) return 0; - } value = MAC_CONFIG_2_PREAMBLE_LENGTH(7) | MAC_CONFIG_2_PAD_CRC | MAC_CONFIG_2_CRC_ENABLE; - if (speed == LINK_SPEED_1000) { + if (speed == LINK_SPEED_1000) value |= MAC_CONFIG_2_INTERFACE_MODE(INTERFACE_MODE_BYTE); - } else { + else { value |= MAC_CONFIG_2_INTERFACE_MODE(INTERFACE_MODE_NIBBLE); reg_PORT_CONTROL(base) |= PORT_CONTROL_SPD; } if (duplex == LINK_DUPLEX_FULL) { value |= MAC_CONFIG_2_FULL_DUPLEX; reg_PORT_CONTROL(base) &= ~PORT_CONTROL_BPT; - } else { + } else reg_PORT_CONTROL(base) |= PORT_CONTROL_BPT; - } reg_MAC_CONFIG_2(base) = value; reg_RX_CONFIG(base) = RX_CONFIG_SE; @@ -875,7 +870,7 @@ static int tsi108_eth_probe(struct eth_device *dev, bd_t * bis) /* * send a packet */ -static int tsi108_eth_send(struct eth_device *dev, +static int tsi108_eth_send (struct eth_device *dev, volatile void *packet, int length) { unsigned long base; @@ -894,9 +889,8 @@ static int tsi108_eth_send(struct eth_device *dev, (unsigned long)tx_descr + sizeof(struct dma_descriptor)); - if (timeout != 0) { - udelay(15); - } + if (timeout != 0) + udelay (15); if (++timeout > 10000) { tx_diag_regs(base); debug_lev(1, @@ -908,7 +902,7 @@ static int tsi108_eth_send(struct eth_device *dev, status = le32_to_cpu(tx_descr->config_status); if ((status & DMA_DESCR_TX_OK) == 0) { #ifdef TX_PRINT_ERRORS - printf("TX packet error: 0x%08x\n %s%s%s%s\n", status, + printf ("TX packet error: 0x%08x\n %s%s%s%s\n", status, status & DMA_DESCR_TX_OK ? "tx error, " : "", status & DMA_DESCR_TX_RETRY_LIMIT ? "retry limit reached, " : "", @@ -918,7 +912,7 @@ static int tsi108_eth_send(struct eth_device *dev, #endif } - debug_lev(9, "sending packet %d\n", length); + debug_lev (9, "sending packet %d\n", length); tx_descr->start_addr0 = cpu_to_le32((vuint32) packet); tx_descr->start_addr1 = 0; tx_descr->next_descr_addr0 = 0; @@ -946,7 +940,7 @@ static int tsi108_eth_send(struct eth_device *dev, /* * Check for received packets and send them up the protocal stack */ -static int tsi108_eth_recv(struct eth_device *dev) +static int tsi108_eth_recv (struct eth_device *dev) { struct dma_descriptor *rx_descr; unsigned long base; @@ -957,7 +951,7 @@ static int tsi108_eth_recv(struct eth_device *dev) base = dev->iobase; /* make sure we see the changes made by the DMA engine */ - invalidate_dcache_range((unsigned long)rx_descr_array, + invalidate_dcache_range ((unsigned long)rx_descr_array, (unsigned long)rx_descr_array + sizeof(rx_descr_array)); @@ -968,7 +962,7 @@ static int tsi108_eth_recv(struct eth_device *dev) status = le32_to_cpu(rx_descr->config_status); if (status & DMA_DESCR_RX_BAD_FRAME) { #ifdef RX_PRINT_ERRORS - printf("RX packet error: 0x%08x\n %s%s%s%s%s%s\n", + printf ("RX packet error: 0x%08x\n %s%s%s%s%s%s\n", status, status & DMA_DESCR_RX_FRAME_IS_TYPE ? "too big, " : "", @@ -989,24 +983,23 @@ static int tsi108_eth_recv(struct eth_device *dev) /*** process packet ***/ buffer = (volatile uchar - *)(le32_to_cpu(rx_descr->start_addr0)); - NetReceive(buffer, length); + *)(le32_to_cpu (rx_descr->start_addr0)); + NetReceive (buffer, length); - invalidate_dcache_range((unsigned long)buffer, + invalidate_dcache_range ((unsigned long)buffer, (unsigned long)buffer + RX_BUFFER_SIZE); } /* Give this buffer back to the DMA engine */ rx_descr->vlan_byte_count = 0; - rx_descr->config_status = cpu_to_le32((RX_BUFFER_SIZE << 16) | + rx_descr->config_status = cpu_to_le32 ((RX_BUFFER_SIZE << 16) | DMA_DESCR_RX_OWNER); /* move descriptor pointer forward */ rx_descr = (struct dma_descriptor - *)(le32_to_cpu(rx_descr->next_descr_addr0)); - if (rx_descr == 0) { + *)(le32_to_cpu (rx_descr->next_descr_addr0)); + if (rx_descr == 0) rx_descr = &rx_descr_array[0]; - } } /* remember where we are for next time */ rx_descr_current = rx_descr; @@ -1026,7 +1019,7 @@ static int tsi108_eth_recv(struct eth_device *dev) /* * disable an ethernet interface */ -static void tsi108_eth_halt(struct eth_device *dev) +static void tsi108_eth_halt (struct eth_device *dev) { unsigned long base; diff --git a/drivers/tsi108_i2c.c b/drivers/tsi108_i2c.c index 08e5e3b..c100cb8 100644 --- a/drivers/tsi108_i2c.c +++ b/drivers/tsi108_i2c.c @@ -23,19 +23,18 @@ */ #include <config.h> +#include <common.h> #ifdef CONFIG_TSI108_I2C - -#include <common.h> #include <tsi108.h> #if (CONFIG_COMMANDS & CFG_CMD_I2C) -#define I2C_DELAY 100000 +#define I2C_DELAY 100000 #undef DEBUG_I2C #ifdef DEBUG_I2C -#define DPRINT(x) printf(x) +#define DPRINT(x) printf (x) #else #define DPRINT(x) #endif @@ -43,7 +42,7 @@ /* All functions assume that Tsi108 I2C block is the only master on the bus */ /* I2C read helper function */ -static int i2c_read_byte( +static int i2c_read_byte ( uint i2c_chan, /* I2C channel number: 0 - main, 1 - SDC SPD */ uchar chip_addr,/* I2C device address on the bus */ uint byte_addr, /* Byte address within I2C device */ @@ -55,19 +54,17 @@ static int i2c_read_byte( u32 op_status = TSI108_I2C_TIMEOUT_ERR; u32 chan_offset = TSI108_I2C_OFFSET; - DPRINT(("I2C read_byte() %d 0x%02x 0x%02x\n", + DPRINT (("I2C read_byte() %d 0x%02x 0x%02x\n", i2c_chan, chip_addr, byte_addr)); - if (0 != i2c_chan) { + if (0 != i2c_chan) chan_offset = TSI108_I2C_SDRAM_OFFSET; - } /* Check if I2C operation is in progress */ temp = *(u32 *) (CFG_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2); if (0 == (temp & (I2C_CNTRL2_RD_STATUS | I2C_CNTRL2_WR_STATUS | - I2C_CNTRL2_START)) - ) { + I2C_CNTRL2_START))) { /* Set device address and operation (read = 0) */ temp = (byte_addr << 16) | ((chip_addr & 0x07) << 8) | ((chip_addr >> 3) & 0x0F); @@ -75,7 +72,7 @@ static int i2c_read_byte( temp; /* Issue the read command - * (at this moment all other parameters are 0 + * (at this moment all other parameters are 0 * (size = 1 byte, lane = 0) */ @@ -108,7 +105,7 @@ static int i2c_read_byte( /* report HW error */ op_status = TSI108_I2C_IF_ERROR; - DPRINT(("I2C HW error reported: 0x%02x\n", temp)); + DPRINT (("I2C HW error reported: 0x%02x\n", temp)); } break; @@ -117,20 +114,20 @@ static int i2c_read_byte( } else { op_status = TSI108_I2C_IF_BUSY; - DPRINT(("I2C Transaction start failed: 0x%02x\n", temp)); + DPRINT (("I2C Transaction start failed: 0x%02x\n", temp)); } - DPRINT(("I2C read_byte() status: 0x%02x\n", op_status)); + DPRINT (("I2C read_byte() status: 0x%02x\n", op_status)); return op_status; } -/* +/* * I2C Read interface as defined in "include/i2c.h" : * chip_addr: I2C chip address, range 0..127 * (to read from SPD channel EEPROM use (0xD0 ... 0xD7) * NOTE: The bit 7 in the chip_addr serves as a channel select. * This hack is for enabling "isdram" command on Tsi108 boards - * without changes to common code. Used for I2C reads only. + * without changes to common code. Used for I2C reads only. * byte_addr: Memory or register address within the chip * alen: Number of bytes to use for addr (typically 1, 2 for larger * memories, 0 for register type devices with only one @@ -141,7 +138,8 @@ static int i2c_read_byte( * Returns: 0 on success, not 0 on failure */ -int i2c_read(uchar chip_addr, uint byte_addr, int alen, uchar * buffer, int len) +int i2c_read (uchar chip_addr, uint byte_addr, int alen, + uchar * buffer, int len) { u32 op_status = TSI108_I2C_PARAM_ERR; u32 i2c_if = 0; @@ -159,20 +157,20 @@ int i2c_read(uchar chip_addr, uint byte_addr, int alen, uchar * buffer, int len) buffer++); if (TSI108_I2C_SUCCESS != op_status) { - DPRINT(("I2C read_byte() failed: 0x%02x (%d left)\n", op_status, len)); + DPRINT (("I2C read_byte() failed: 0x%02x (%d left)\n", op_status, len)); break; } } } - DPRINT(("I2C read() status: 0x%02x\n", op_status)); + DPRINT (("I2C read() status: 0x%02x\n", op_status)); return op_status; } /* I2C write helper function */ -static int i2c_write_byte(uchar chip_addr,/* I2C device address on the bus */ +static int i2c_write_byte (uchar chip_addr,/* I2C device address on the bus */ uint byte_addr, /* Byte address within I2C device */ uchar * buffer /* pointer to data buffer */ ) @@ -210,7 +208,7 @@ static int i2c_write_byte(uchar chip_addr,/* I2C device address on the bus */ /* Wait until operation completed */ do { - // Read I2C operation status + /* Read I2C operation status */ temp = *(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET + I2C_CNTRL2); @@ -227,7 +225,7 @@ static int i2c_write_byte(uchar chip_addr,/* I2C device address on the bus */ /* report detected HW error */ op_status = TSI108_I2C_IF_ERROR; - DPRINT(("I2C HW error reported: 0x%02x\n", temp)); + DPRINT (("I2C HW error reported: 0x%02x\n", temp)); } break; @@ -237,13 +235,13 @@ static int i2c_write_byte(uchar chip_addr,/* I2C device address on the bus */ } else { op_status = TSI108_I2C_IF_BUSY; - DPRINT(("I2C Transaction start failed: 0x%02x\n", temp)); + DPRINT (("I2C Transaction start failed: 0x%02x\n", temp)); } return op_status; } -/* +/* * I2C Write interface as defined in "include/i2c.h" : * chip_addr: I2C chip address, range 0..127 * byte_addr: Memory or register address within the chip @@ -256,7 +254,7 @@ static int i2c_write_byte(uchar chip_addr,/* I2C device address on the bus */ * Returns: 0 on success, not 0 on failure */ -int i2c_write(uchar chip_addr, uint byte_addr, int alen, uchar * buffer, +int i2c_write (uchar chip_addr, uint byte_addr, int alen, uchar * buffer, int len) { u32 op_status = TSI108_I2C_PARAM_ERR; @@ -265,10 +263,10 @@ int i2c_write(uchar chip_addr, uint byte_addr, int alen, uchar * buffer, if (chip_addr <= 0x7F && (byte_addr + len) <= (0x01 << (alen * 8))) { while (len--) { op_status = - i2c_write_byte(chip_addr, byte_addr++, buffer++); + i2c_write_byte (chip_addr, byte_addr++, buffer++); if (TSI108_I2C_SUCCESS != op_status) { - DPRINT(("I2C write_byte() failed: 0x%02x (%d left)\n", op_status, len)); + DPRINT (("I2C write_byte() failed: 0x%02x (%d left)\n", op_status, len)); break; } @@ -278,13 +276,13 @@ int i2c_write(uchar chip_addr, uint byte_addr, int alen, uchar * buffer, return op_status; } -/* +/* * I2C interface function as defined in "include/i2c.h". * Probe the given I2C chip address by reading single byte from offset 0. * Returns 0 if a chip responded, not 0 on failure. */ -int i2c_probe(uchar chip) +int i2c_probe (uchar chip) { u32 tmp; @@ -293,8 +291,8 @@ int i2c_probe(uchar chip) * The Tsi108 HW doesn't support sending just the chip address * and checkong for an <ACK> back. */ - return i2c_read(chip, 0, 1, (char *)&tmp, 1); + return i2c_read (chip, 0, 1, (char *)&tmp, 1); } -#endif /* (CONFIG_COMMANDS & CFG_CMD_I2C) */ +#endif /* (CONFIG_COMMANDS & CFG_CMD_I2C) */ #endif /* CONFIG_TSI108_I2C */ diff --git a/drivers/tsi108_pci.c b/drivers/tsi108_pci.c index f374ede..9f606df 100644 --- a/drivers/tsi108_pci.c +++ b/drivers/tsi108_pci.c @@ -36,7 +36,7 @@ struct pci_controller local_hose; -void tsi108_clear_pci_error(void) +void tsi108_clear_pci_error (void) { u32 err_stat, err_addr, pci_stat; @@ -79,11 +79,11 @@ void tsi108_clear_pci_error(void) return; } -unsigned int __get_pci_config_dword(u32 addr) +unsigned int __get_pci_config_dword (u32 addr) { unsigned int retval; - __asm__ __volatile__(" lwbrx %0,0,%1\n" + __asm__ __volatile__ (" lwbrx %0,0,%1\n" "1: eieio\n" "2:\n" ".section .fixup,\"ax\"\n" @@ -97,53 +97,53 @@ unsigned int __get_pci_config_dword(u32 addr) return (retval); } -static int tsi108_read_config_dword(struct pci_controller *hose, +static int tsi108_read_config_dword (struct pci_controller *hose, pci_dev_t dev, int offset, u32 * value) { dev &= (CFG_PCI_CFG_SIZE - 1); dev |= (CFG_PCI_CFG_BASE | (offset & 0xfc)); *value = __get_pci_config_dword(dev); if (0xFFFFFFFF == *value) - tsi108_clear_pci_error(); + tsi108_clear_pci_error (); return 0; } -static int tsi108_write_config_dword(struct pci_controller *hose, +static int tsi108_write_config_dword (struct pci_controller *hose, pci_dev_t dev, int offset, u32 value) { dev &= (CFG_PCI_CFG_SIZE - 1); dev |= (CFG_PCI_CFG_BASE | (offset & 0xfc)); - out_le32((volatile unsigned *)dev, value); + out_le32 ((volatile unsigned *)dev, value); return 0; } -void pci_init_board(void) +void pci_init_board (void) { struct pci_controller *hose = (struct pci_controller *)&local_hose; hose->first_busno = 0; hose->last_busno = 0xff; - pci_set_region(hose->regions + 0, + pci_set_region (hose->regions + 0, CFG_PCI_MEMORY_BUS, CFG_PCI_MEMORY_PHYS, CFG_PCI_MEMORY_SIZE, PCI_REGION_MEM | PCI_REGION_MEMORY); /* PCI memory space */ - pci_set_region(hose->regions + 1, + pci_set_region (hose->regions + 1, CFG_PCI_MEM_BUS, CFG_PCI_MEM_PHYS, CFG_PCI_MEM_SIZE, PCI_REGION_MEM); /* PCI I/O space */ - pci_set_region(hose->regions + 2, + pci_set_region (hose->regions + 2, CFG_PCI_IO_BUS, CFG_PCI_IO_PHYS, CFG_PCI_IO_SIZE, PCI_REGION_IO); hose->region_count = 3; - pci_set_ops(hose, + pci_set_ops (hose, pci_hose_read_config_byte_via_dword, pci_hose_read_config_word_via_dword, tsi108_read_config_dword, @@ -151,22 +151,22 @@ void pci_init_board(void) pci_hose_write_config_word_via_dword, tsi108_write_config_dword); - pci_register_hose(hose); + pci_register_hose (hose); - hose->last_busno = pci_hose_scan(hose); + hose->last_busno = pci_hose_scan (hose); - debug("Done PCI initialization\n"); + debug ("Done PCI initialization\n"); return; } #ifdef CONFIG_OF_FLAT_TREE void -ft_pci_setup(void *blob, bd_t *bd) +ft_pci_setup (void *blob, bd_t *bd) { u32 *p; int len; - p = (u32 *)ft_get_prop(blob, "/" OF_TSI "/pci@1000/bus-range", &len); + p = (u32 *)ft_get_prop (blob, "/" OF_TSI "/pci@1000/bus-range", &len); if (p != NULL) { p[0] = local_hose.first_busno; p[1] = local_hose.last_busno; |