diff options
author | Peng Fan <van.freenix@gmail.com> | 2016-06-15 02:53:00 (GMT) |
---|---|---|
committer | York Sun <york.sun@nxp.com> | 2016-06-28 19:08:53 (GMT) |
commit | f53225cce406058c09cf81456d9dc4956fef1b73 (patch) | |
tree | 005e441c99059d6894d419cb91982ca29d031ca7 /drivers | |
parent | 68aaa980c488696fa6f71109e53e819b02455e33 (diff) | |
download | u-boot-f53225cce406058c09cf81456d9dc4956fef1b73.tar.xz |
mmc: fsl: reset to normal boot mode when eMMC fast boot
When booting in eMMC fast boot, MMC host does not exit from
boot mode after bootrom loading image. So the first command
'CMD0' sent in uboot will pull down the CMD line to low and
cause errors.
This patch cleans the MMC boot register in "mmc_init" to put the
MMC host back to normal mode.
Also clear DLL_CTRL delay line settings at USDHC initialization
to eliminate the pre-settings from boot rom.
Signed-off-by: Peng Fan <van.freenix@gmail.com>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
Cc: York Sun <york.sun@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/mmc/fsl_esdhc.c | 38 |
1 files changed, 29 insertions, 9 deletions
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index b7b4f14..bfbef66 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -56,21 +56,27 @@ struct fsl_esdhc { uint fevt; /* Force event register */ uint admaes; /* ADMA error status register */ uint adsaddr; /* ADMA system address register */ - char reserved2[100]; /* reserved */ - uint vendorspec; /* Vendor Specific register */ - char reserved3[56]; /* reserved */ + char reserved2[4]; + uint dllctrl; + uint dllstat; + uint clktunectrlstatus; + char reserved3[84]; + uint vendorspec; + uint mmcboot; + uint vendorspec2; + char reserved4[48]; uint hostver; /* Host controller version register */ - char reserved4[4]; /* reserved */ - uint dmaerraddr; /* DMA error address register */ char reserved5[4]; /* reserved */ - uint dmaerrattr; /* DMA error attribute register */ + uint dmaerraddr; /* DMA error address register */ char reserved6[4]; /* reserved */ + uint dmaerrattr; /* DMA error attribute register */ + char reserved7[4]; /* reserved */ uint hostcapblt2; /* Host controller capabilities register 2 */ - char reserved7[8]; /* reserved */ + char reserved8[8]; /* reserved */ uint tcr; /* Tuning control register */ - char reserved8[28]; /* reserved */ + char reserved9[28]; /* reserved */ uint sddirctl; /* SD direction control register */ - char reserved9[712]; /* reserved */ + char reserved10[712];/* reserved */ uint scr; /* eSDHC control register */ }; @@ -616,6 +622,20 @@ static int esdhc_init(struct mmc *mmc) while ((esdhc_read32(®s->sysctl) & SYSCTL_RSTA) && --timeout) udelay(1000); +#if defined(CONFIG_FSL_USDHC) + /* RSTA doesn't reset MMC_BOOT register, so manually reset it */ + esdhc_write32(®s->mmcboot, 0x0); + /* Reset MIX_CTRL and CLK_TUNE_CTRL_STATUS regs to 0 */ + esdhc_write32(®s->mixctrl, 0x0); + esdhc_write32(®s->clktunectrlstatus, 0x0); + + /* Put VEND_SPEC to default value */ + esdhc_write32(®s->vendorspec, VENDORSPEC_INIT); + + /* Disable DLL_CTRL delay line */ + esdhc_write32(®s->dllctrl, 0x0); +#endif + #ifndef ARCH_MXC /* Enable cache snooping */ esdhc_write32(®s->scr, 0x00000040); |