diff options
author | Christophe Leroy <christophe.leroy@c-s.fr> | 2017-07-06 08:33:25 (GMT) |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2017-07-08 19:56:03 (GMT) |
commit | f88c431b8a264872e9391e039541792a13a5076a (patch) | |
tree | 1a7a68402404e2f886aacc80a980ef4131412c1e /drivers | |
parent | fad51ac3af429d5b5b6f6ad4d924ee00e1525db1 (diff) | |
download | u-boot-f88c431b8a264872e9391e039541792a13a5076a.tar.xz |
powerpc, 8xx: move SPI driver to drivers/spi/
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/spi/Kconfig | 6 | ||||
-rw-r--r-- | drivers/spi/Makefile | 1 | ||||
-rw-r--r-- | drivers/spi/mpc8xx_spi.c | 336 |
3 files changed, 343 insertions, 0 deletions
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index fe01c73..8a8e8e4 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -223,4 +223,10 @@ config TI_QSPI Enable the TI Quad-SPI (QSPI) driver for DRA7xx and AM43xx evms. This driver support spi flash single, quad and memory reads. +config MPC8XX_SPI + bool "MPC8XX SPI Driver" + depends on 8xx + help + Enable support for SPI on MPC8XX + endmenu # menu "SPI Support" diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index c090562..9f8b86d 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -30,6 +30,7 @@ obj-$(CONFIG_FSL_QSPI) += fsl_qspi.o obj-$(CONFIG_ICH_SPI) += ich.o obj-$(CONFIG_KIRKWOOD_SPI) += kirkwood_spi.o obj-$(CONFIG_LPC32XX_SSP) += lpc32xx_ssp.o +obj-$(CONFIG_MPC8XX_SPI) += mpc8xx_spi.o obj-$(CONFIG_MPC8XXX_SPI) += mpc8xxx_spi.o obj-$(CONFIG_MVEBU_A3700_SPI) += mvebu_a3700_spi.o obj-$(CONFIG_MXC_SPI) += mxc_spi.o diff --git a/drivers/spi/mpc8xx_spi.c b/drivers/spi/mpc8xx_spi.c new file mode 100644 index 0000000..b5bd558 --- /dev/null +++ b/drivers/spi/mpc8xx_spi.c @@ -0,0 +1,336 @@ +/* + * Copyright (c) 2001 Navin Boppuri / Prashant Patel + * <nboppuri@trinetcommunication.com>, + * <pmpatel@trinetcommunication.com> + * Copyright (c) 2001 Gerd Mennchen <Gerd.Mennchen@icn.siemens.de> + * Copyright (c) 2001 Wolfgang Denk, DENX Software Engineering, <wd@denx.de>. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * MPC8xx CPM SPI interface. + * + * Parts of this code are probably not portable and/or specific to + * the board which I used for the tests. Please send fixes/complaints + * to wd@denx.de + * + */ + +#include <common.h> +#include <mpc8xx.h> +#include <commproc.h> +#include <linux/ctype.h> +#include <malloc.h> +#include <post.h> +#include <serial.h> + +#define SPI_EEPROM_WREN 0x06 +#define SPI_EEPROM_RDSR 0x05 +#define SPI_EEPROM_READ 0x03 +#define SPI_EEPROM_WRITE 0x02 + +/* --------------------------------------------------------------- + * Offset for initial SPI buffers in DPRAM: + * We need a 520 byte scratch DPRAM area to use at an early stage. + * It is used between the two initialization calls (spi_init_f() + * and spi_init_r()). + * The value 0xb00 makes it far enough from the start of the data + * area (as well as from the stack pointer). + * --------------------------------------------------------------- */ +#ifndef CONFIG_SYS_SPI_INIT_OFFSET +#define CONFIG_SYS_SPI_INIT_OFFSET 0xB00 +#endif + +#define CPM_SPI_BASE_RX CPM_SPI_BASE +#define CPM_SPI_BASE_TX (CPM_SPI_BASE + sizeof(cbd_t)) + +/* ------------------- + * Function prototypes + * ------------------- */ +ssize_t spi_xfer(size_t); + +/* ------------------- + * Variables + * ------------------- */ + +#define MAX_BUFFER 0x104 + +/* ---------------------------------------------------------------------- + * Initially we place the RX and TX buffers at a fixed location in DPRAM! + * ---------------------------------------------------------------------- */ +static uchar *rxbuf = + (uchar *)&((cpm8xx_t *)&((immap_t *)CONFIG_SYS_IMMR)->im_cpm)->cp_dpmem + [CONFIG_SYS_SPI_INIT_OFFSET]; +static uchar *txbuf = + (uchar *)&((cpm8xx_t *)&((immap_t *)CONFIG_SYS_IMMR)->im_cpm)->cp_dpmem + [CONFIG_SYS_SPI_INIT_OFFSET+MAX_BUFFER]; + +/* ************************************************************************** + * + * Function: spi_init_f + * + * Description: Init SPI-Controller (ROM part) + * + * return: --- + * + * *********************************************************************** */ +void spi_init_f(void) +{ + immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR; + cpm8xx_t __iomem *cp = &immr->im_cpm; + spi_t __iomem *spi = (spi_t __iomem *)&cp->cp_dparam[PROFF_SPI]; + cbd_t __iomem *tbdf, *rbdf; + + /* Disable relocation */ + out_be16(&spi->spi_rpbase, 0); + +/* 1 */ + /* ------------------------------------------------ + * Initialize Port B SPI pins -> page 34-8 MPC860UM + * (we are only in Master Mode !) + * ------------------------------------------------ */ + + /* -------------------------------------------- + * GPIO or per. Function + * PBPAR[28] = 1 [0x00000008] -> PERI: (SPIMISO) + * PBPAR[29] = 1 [0x00000004] -> PERI: (SPIMOSI) + * PBPAR[30] = 1 [0x00000002] -> PERI: (SPICLK) + * PBPAR[31] = 0 [0x00000001] -> GPIO: (CS for PCUE/CCM-EEPROM) + * -------------------------------------------- */ + clrsetbits_be32(&cp->cp_pbpar, 0x00000001, 0x0000000E); /* set bits */ + + /* ---------------------------------------------- + * In/Out or per. Function 0/1 + * PBDIR[28] = 1 [0x00000008] -> PERI1: SPIMISO + * PBDIR[29] = 1 [0x00000004] -> PERI1: SPIMOSI + * PBDIR[30] = 1 [0x00000002] -> PERI1: SPICLK + * PBDIR[31] = 1 [0x00000001] -> GPIO OUT: CS for PCUE/CCM-EEPROM + * ---------------------------------------------- */ + setbits_be32(&cp->cp_pbdir, 0x0000000F); + + /* ---------------------------------------------- + * open drain or active output + * PBODR[28] = 1 [0x00000008] -> open drain: SPIMISO + * PBODR[29] = 0 [0x00000004] -> active output SPIMOSI + * PBODR[30] = 0 [0x00000002] -> active output: SPICLK + * PBODR[31] = 0 [0x00000001] -> active output GPIO OUT: CS for PCUE/CCM + * ---------------------------------------------- */ + + clrsetbits_be16(&cp->cp_pbodr, 0x00000007, 0x00000008); + + /* Initialize the parameter ram. + * We need to make sure many things are initialized to zero + */ + out_be32(&spi->spi_rstate, 0); + out_be32(&spi->spi_rdp, 0); + out_be16(&spi->spi_rbptr, 0); + out_be16(&spi->spi_rbc, 0); + out_be32(&spi->spi_rxtmp, 0); + out_be32(&spi->spi_tstate, 0); + out_be32(&spi->spi_tdp, 0); + out_be16(&spi->spi_tbptr, 0); + out_be16(&spi->spi_tbc, 0); + out_be32(&spi->spi_txtmp, 0); + +/* 3 */ + /* Set up the SPI parameters in the parameter ram */ + out_be16(&spi->spi_rbase, CPM_SPI_BASE_RX); + out_be16(&spi->spi_tbase, CPM_SPI_BASE_TX); + + /***********IMPORTANT******************/ + + /* + * Setting transmit and receive buffer descriptor pointers + * initially to rbase and tbase. Only the microcode patches + * documentation talks about initializing this pointer. This + * is missing from the sample I2C driver. If you dont + * initialize these pointers, the kernel hangs. + */ + out_be16(&spi->spi_rbptr, CPM_SPI_BASE_RX); + out_be16(&spi->spi_tbptr, CPM_SPI_BASE_TX); + +/* 4 */ + /* Init SPI Tx + Rx Parameters */ + while (in_be16(&cp->cp_cpcr) & CPM_CR_FLG) + ; + + out_be16(&cp->cp_cpcr, mk_cr_cmd(CPM_CR_CH_SPI, CPM_CR_INIT_TRX) | + CPM_CR_FLG); + while (in_be16(&cp->cp_cpcr) & CPM_CR_FLG) + ; + +/* 5 */ + /* Set SDMA configuration register */ + out_be32(&immr->im_siu_conf.sc_sdcr, 0x0001); + +/* 6 */ + /* Set to big endian. */ + out_8(&spi->spi_tfcr, SMC_EB); + out_8(&spi->spi_rfcr, SMC_EB); + +/* 7 */ + /* Set maximum receive size. */ + out_be16(&spi->spi_mrblr, MAX_BUFFER); + +/* 8 + 9 */ + /* tx and rx buffer descriptors */ + tbdf = (cbd_t __iomem *)&cp->cp_dpmem[CPM_SPI_BASE_TX]; + rbdf = (cbd_t __iomem *)&cp->cp_dpmem[CPM_SPI_BASE_RX]; + + clrbits_be16(&tbdf->cbd_sc, BD_SC_READY); + clrbits_be16(&rbdf->cbd_sc, BD_SC_EMPTY); + + /* Set the bd's rx and tx buffer address pointers */ + out_be32(&rbdf->cbd_bufaddr, (ulong)rxbuf); + out_be32(&tbdf->cbd_bufaddr, (ulong)txbuf); + +/* 10 + 11 */ + out_8(&cp->cp_spim, 0); /* Mask all SPI events */ + out_8(&cp->cp_spie, SPI_EMASK); /* Clear all SPI events */ + + return; +} + +/* ************************************************************************** + * + * Function: spi_init_r + * + * Description: Init SPI-Controller (RAM part) - + * The malloc engine is ready and we can move our buffers to + * normal RAM + * + * return: --- + * + * *********************************************************************** */ +void spi_init_r(void) +{ + immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR; + cpm8xx_t __iomem *cp = &immr->im_cpm; + spi_t __iomem *spi = (spi_t __iomem *)&cp->cp_dparam[PROFF_SPI]; + cbd_t __iomem *tbdf, *rbdf; + + /* Disable relocation */ + out_be16(&spi->spi_rpbase, 0); + + /* tx and rx buffer descriptors */ + tbdf = (cbd_t __iomem *)&cp->cp_dpmem[CPM_SPI_BASE_TX]; + rbdf = (cbd_t __iomem *)&cp->cp_dpmem[CPM_SPI_BASE_RX]; + + /* Allocate memory for RX and TX buffers */ + rxbuf = (uchar *)malloc(MAX_BUFFER); + txbuf = (uchar *)malloc(MAX_BUFFER); + + out_be32(&rbdf->cbd_bufaddr, (ulong)rxbuf); + out_be32(&tbdf->cbd_bufaddr, (ulong)txbuf); + + return; +} + +/**************************************************************************** + * Function: spi_write + **************************************************************************** */ +ssize_t spi_write(uchar *addr, int alen, uchar *buffer, int len) +{ + int i; + + memset(rxbuf, 0, MAX_BUFFER); + memset(txbuf, 0, MAX_BUFFER); + *txbuf = SPI_EEPROM_WREN; /* write enable */ + spi_xfer(1); + memcpy(txbuf, addr, alen); + *txbuf = SPI_EEPROM_WRITE; /* WRITE memory array */ + memcpy(alen + txbuf, buffer, len); + spi_xfer(alen + len); + /* ignore received data */ + for (i = 0; i < 1000; i++) { + *txbuf = SPI_EEPROM_RDSR; /* read status */ + txbuf[1] = 0; + spi_xfer(2); + if (!(rxbuf[1] & 1)) + break; + udelay(1000); + } + if (i >= 1000) + printf("*** spi_write: Time out while writing!\n"); + + return len; +} + +/**************************************************************************** + * Function: spi_read + **************************************************************************** */ +ssize_t spi_read(uchar *addr, int alen, uchar *buffer, int len) +{ + memset(rxbuf, 0, MAX_BUFFER); + memset(txbuf, 0, MAX_BUFFER); + memcpy(txbuf, addr, alen); + *txbuf = SPI_EEPROM_READ; /* READ memory array */ + + /* + * There is a bug in 860T (?) that cuts the last byte of input + * if we're reading into DPRAM. The solution we choose here is + * to always read len+1 bytes (we have one extra byte at the + * end of the buffer). + */ + spi_xfer(alen + len + 1); + memcpy(buffer, alen + rxbuf, len); + + return len; +} + +/**************************************************************************** + * Function: spi_xfer + **************************************************************************** */ +ssize_t spi_xfer(size_t count) +{ + immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR; + cpm8xx_t __iomem *cp = &immr->im_cpm; + spi_t __iomem *spi = (spi_t __iomem *)&cp->cp_dparam[PROFF_SPI]; + cbd_t __iomem *tbdf, *rbdf; + int tm; + + /* Disable relocation */ + out_be16(&spi->spi_rpbase, 0); + + tbdf = (cbd_t __iomem *)&cp->cp_dpmem[CPM_SPI_BASE_TX]; + rbdf = (cbd_t __iomem *)&cp->cp_dpmem[CPM_SPI_BASE_RX]; + + /* Set CS for device */ + clrbits_be32(&cp->cp_pbdat, 0x0001); + + /* Setting tx bd status and data length */ + out_be16(&tbdf->cbd_sc, BD_SC_READY | BD_SC_LAST | BD_SC_WRAP); + out_be16(&tbdf->cbd_datlen, count); + + /* Setting rx bd status and data length */ + out_be16(&rbdf->cbd_sc, BD_SC_EMPTY | BD_SC_WRAP); + out_be16(&rbdf->cbd_datlen, 0); /* rx length has no significance */ + + clrsetbits_be16(&cp->cp_spmode, ~SPMODE_LOOP, SPMODE_REV | SPMODE_MSTR | + SPMODE_EN | SPMODE_LEN(8) | SPMODE_PM(0x8)); + out_8(&cp->cp_spim, 0); /* Mask all SPI events */ + out_8(&cp->cp_spie, SPI_EMASK); /* Clear all SPI events */ + + /* start spi transfer */ + setbits_8(&cp->cp_spcom, SPI_STR); /* Start transmit */ + + /* -------------------------------- + * Wait for SPI transmit to get out + * or time out (1 second = 1000 ms) + * -------------------------------- */ + for (tm = 0; tm < 1000; ++tm) { + if (in_8(&cp->cp_spie) & SPI_TXB) /* Tx Buffer Empty */ + break; + if ((in_be16(&tbdf->cbd_sc) & BD_SC_READY) == 0) + break; + udelay(1000); + } + if (tm >= 1000) + printf("*** spi_xfer: Time out while xferring to/from SPI!\n"); + + /* Clear CS for device */ + setbits_be32(&cp->cp_pbdat, 0x0001); + + return count; +} |