summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorLi Yang <leoli@freescale.com>2010-11-25 17:06:09 (GMT)
committerWolfgang Denk <wd@denx.de>2010-12-18 22:15:24 (GMT)
commit030955c2cad511e678b3804c7de650db6920de4e (patch)
treebe37f7075c6c859d7c0815f27879ad184c82abf5 /drivers
parent63786d299defb7248932d551b38575d36c1f6a84 (diff)
downloadu-boot-030955c2cad511e678b3804c7de650db6920de4e.tar.xz
fsl_esdhc: Fix the voltage validation process
The current code use all the voltage range support by the host controller to do the validation. This will cause problem when the host supports Low Voltage Range. Change the validation voltage to be based on board setup. Signed-off-by: Li Yang <leoli@freescale.com> Tested-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/mmc/fsl_esdhc.c20
1 files changed, 15 insertions, 5 deletions
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index 7bab2f6..40b136c 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -444,7 +444,7 @@ int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg)
{
struct fsl_esdhc *regs;
struct mmc *mmc;
- u32 caps;
+ u32 caps, voltage_caps;
if (!cfg)
return -1;
@@ -462,14 +462,24 @@ int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg)
mmc->set_ios = esdhc_set_ios;
mmc->init = esdhc_init;
+ voltage_caps = 0;
caps = regs->hostcapblt;
-
if (caps & ESDHC_HOSTCAPBLT_VS18)
- mmc->voltages |= MMC_VDD_165_195;
+ voltage_caps |= MMC_VDD_165_195;
if (caps & ESDHC_HOSTCAPBLT_VS30)
- mmc->voltages |= MMC_VDD_29_30 | MMC_VDD_30_31;
+ voltage_caps |= MMC_VDD_29_30 | MMC_VDD_30_31;
if (caps & ESDHC_HOSTCAPBLT_VS33)
- mmc->voltages |= MMC_VDD_32_33 | MMC_VDD_33_34;
+ voltage_caps |= MMC_VDD_32_33 | MMC_VDD_33_34;
+
+#ifdef CONFIG_SYS_SD_VOLTAGE
+ mmc->voltages = CONFIG_SYS_SD_VOLTAGE;
+#else
+ mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
+#endif
+ if ((mmc->voltages & voltage_caps) == 0) {
+ printf("voltage not supported by controller\n");
+ return -1;
+ }
mmc->host_caps = MMC_MODE_4BIT | MMC_MODE_8BIT;