Blackfin: unify common ADI board settings

Rather than duplicate the same ADI settings in every ADI board, create a
common ADI config header and have all ADI boards start using that.  This
will also make merging the ~10 boards I have to forward port a lot easier.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

1 files changed, 198 insertions, 0 deletions

diff --git a/include/configs/bfin_adi_common.h b/include/configs/bfin_adi_common.h
new file mode 100644
index 0000000..6afce4d
--- /dev/null
+++ b/include/configs/bfin_adi_common.h
@@ -0,0 +1,198 @@
+/*
+ * U-Boot - Common settings for Analog Devices boards
+ */
+
+#ifndef __CONFIG_BFIN_ADI_COMMON_H__
+#define __CONFIG_BFIN_ADI_COMMON_H__
+
+/*
+ * Command Settings
+ */
+#ifndef _CONFIG_CMD_DEFAULT_H
+# include <config_cmd_default.h>
+# if ADI_CMDS_NETWORK
+#  define CONFIG_CMD_DHCP
+#  define CONFIG_CMD_PING
+#  ifdef CONFIG_BFIN_MAC
+#   define CONFIG_CMD_MII
+#  endif
+# else
+#  undef CONFIG_CMD_BOOTD
+#  undef CONFIG_CMD_NET
+#  undef CONFIG_CMD_NFS
+# endif
+# ifdef CONFIG_LIBATA
+#  define CONFIG_CMD_FAT
+#  define CONFIG_CMD_SATA
+#  define CONFIG_DOS_PARTITION
+# endif
+# ifdef CONFIG_MMC
+#  define CONFIG_CMD_FAT
+#  define CONFIG_CMD_MMC
+#  define CONFIG_DOS_PARTITION
+# endif
+# ifdef CONFIG_USB
+#  define CONFIG_CMD_EXT2
+#  define CONFIG_CMD_FAT
+#  define CONFIG_CMD_USB
+#  define CONFIG_CMD_USB_STORAGE
+#  define CONFIG_DOS_PARTITION
+# endif
+# ifdef CONFIG_POST
+#  define CONFIG_CMD_DIAG
+# endif
+# ifdef CONFIG_RTC_BFIN
+#  define CONFIG_CMD_DATE
+# endif
+# ifdef CONFIG_SPI
+#  define CONFIG_CMD_EEPROM
+# endif
+# if defined(CONFIG_BFIN_SPI) || defined(CONFIG_SOFT_SPI)
+#  define CONFIG_CMD_SPI
+# endif
+# ifdef CONFIG_SPI_FLASH
+#  define CONFIG_CMD_SF
+# endif
+# if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+#  define CONFIG_CMD_I2C
+# endif
+# ifdef CONFIG_SYS_NO_FLASH
+#  undef CONFIG_CMD_FLASH
+#  undef CONFIG_CMD_IMLS
+# else
+#  define CONFIG_CMD_JFFS2
+# endif
+# define CONFIG_CMD_BOOTLDR
+# define CONFIG_CMD_CACHE
+# define CONFIG_CMD_CPLBINFO
+# define CONFIG_CMD_ELF
+# define CONFIG_ELF_SIMPLE_LOAD
+# define CONFIG_CMD_REGINFO
+# define CONFIG_CMD_STRINGS
+# if defined(__ADSPBF51x__) || defined(__ADSPBF52x__) || defined(__ADSPBF54x__)
+#  define CONFIG_CMD_OTP
+# endif
+#endif
+
+/*
+ * Console Settings
+ */
+#define CONFIG_SYS_LONGHELP	1
+#define CONFIG_CMDLINE_EDITING	1
+#define CONFIG_AUTO_COMPLETE	1
+#define CONFIG_LOADS_ECHO	1
+#define CONFIG_JTAG_CONSOLE
+#ifndef CONFIG_BAUDRATE
+# define CONFIG_BAUDRATE	57600
+#endif
+
+/*
+ * Debug Settings
+ */
+#define CONFIG_ENV_OVERWRITE	1
+#define CONFIG_DEBUG_DUMP	1
+#define CONFIG_DEBUG_DUMP_SYMS	1
+#define CONFIG_PANIC_HANG	1
+
+/*
+ * Env Settings
+ */
+#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART)
+# define CONFIG_BOOTDELAY	-1
+#else
+# define CONFIG_BOOTDELAY	5
+#endif
+#define CONFIG_BOOTCOMMAND	"run ramboot"
+#ifdef CONFIG_VIDEO
+# define CONFIG_BOOTARGS_VIDEO "console=tty0 "
+#else
+# define CONFIG_BOOTARGS_VIDEO ""
+#endif
+#define CONFIG_BOOTARGS	\
+	"root=/dev/mtdblock0 rw " \
+	"earlyprintk=" \
+		"serial," \
+		"uart" MK_STR(CONFIG_UART_CONSOLE) "," \
+		MK_STR(CONFIG_BAUDRATE) " " \
+	CONFIG_BOOTARGS_VIDEO \
+	"console=ttyBF0," MK_STR(CONFIG_BAUDRATE)
+
+#if defined(CONFIG_CMD_NET)
+# if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
+#  define UBOOT_ENV_FILE "u-boot.bin"
+# else
+#  define UBOOT_ENV_FILE "u-boot.ldr"
+# endif
+# if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
+#  ifdef CONFIG_SPI
+#   define UBOOT_ENV_UPDATE \
+		"eeprom write $(loadaddr) 0x0 $(filesize)"
+#  else
+#   define UBOOT_ENV_UPDATE \
+		"sf probe " MK_STR(BFIN_BOOT_SPI_SSEL) ";" \
+		"sf erase 0 0x40000;" \
+		"sf write $(loadaddr) 0 $(filesize)"
+#  endif
+# elif (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND)
+#  define UBOOT_ENV_UPDATE \
+		"nand unlock 0 0x40000;" \
+		"nand erase 0 0x40000;" \
+		"nand write $(loadaddr) 0 0x40000"
+# else
+#  define UBOOT_ENV_UPDATE \
+		"protect off 0x20000000 0x2003FFFF;" \
+		"erase 0x20000000 0x2003FFFF;" \
+		"cp.b $(loadaddr) 0x20000000 $(filesize)"
+# endif
+# define NETWORK_ENV_SETTINGS \
+	"ubootfile=" UBOOT_ENV_FILE "\0" \
+	"update=" \
+		"tftp $(loadaddr) $(ubootfile);" \
+		UBOOT_ENV_UPDATE \
+		"\0" \
+	"addip=set bootargs $(bootargs) " \
+		"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):" \
+		   "$(hostname):eth0:off" \
+		"\0" \
+	"ramargs=set bootargs " CONFIG_BOOTARGS "\0" \
+	"ramboot=" \
+		"tftp $(loadaddr) uImage;" \
+		"run ramargs;" \
+		"run addip;" \
+		"bootm" \
+		"\0" \
+	"nfsargs=set bootargs " \
+		"root=/dev/nfs rw " \
+		"nfsroot=$(serverip):$(rootpath),tcp,nfsvers=3" \
+		"\0" \
+	"nfsboot=" \
+		"tftp $(loadaddr) vmImage;" \
+		"run nfsargs;" \
+		"run addip;" \
+		"bootm" \
+		"\0"
+#else
+# define NETWORK_ENV_SETTINGS
+#endif
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	NETWORK_ENV_SETTINGS \
+	"flashboot=bootm 0x20100000\0"
+
+/*
+ * Network Settings
+ */
+#ifdef CONFIG_CMD_NET
+# define CONFIG_IPADDR		192.168.0.15
+# define CONFIG_NETMASK		255.255.255.0
+# define CONFIG_GATEWAYIP	192.168.0.1
+# define CONFIG_SERVERIP	192.168.0.2
+# define CONFIG_ROOTPATH	/romfs
+# ifdef CONFIG_CMD_DHCP
+#  ifndef CONFIG_SYS_AUTOLOAD
+#   define CONFIG_SYS_AUTOLOAD "no"
+#  endif
+# endif
+# define CONFIG_NET_RETRY_COUNT 20
+#endif
+
+#endif