diff options
| author | Albert Aribaud <[albert.aribaud@free.fr]> | 2010-08-07 23:47:06 (GMT) |
|---|---|---|
| committer | Prafulla Wadaskar <prafulla@marvell.com> | 2010-08-07 23:47:06 (GMT) |
| commit | ecaf3af2977e76484e0231d3113be3f4bbf2b8d6 (patch) | |
| tree | ef571ef32a92d20fa0516247bbae452a03d65594 /include/configs/edminiv2.h | |
| parent | 113bfe48bc92faa1191190b525a46419918971d9 (diff) | |
| download | u-boot-ecaf3af2977e76484e0231d3113be3f4bbf2b8d6.tar.xz | |
edminiv2: add mvsata_ide and cmd_ide support
Add mvsata_ide and cmd_ide configuration in edminiv2 config
Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>
Diffstat (limited to 'include/configs/edminiv2.h')
| -rw-r--r-- | include/configs/edminiv2.h | 34 |
1 files changed, 33 insertions, 1 deletions
diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h index 055931c..57dd165 100644 --- a/include/configs/edminiv2.h +++ b/include/configs/edminiv2.h @@ -60,7 +60,7 @@ #define ORION5X_MPP0_7 0x00000003 #define ORION5X_MPP8_15 0x55550000 -#define ORION5X_MPP16_23 0x00000000 +#define ORION5X_MPP16_23 0x00005555 /* * Board-specific values for Orion5x GPIO low level init: @@ -131,6 +131,7 @@ * Commands configuration - using default command set for now */ #include <config_cmd_default.h> +#define CONFIG_CMD_IDE /* * Network @@ -150,6 +151,37 @@ #endif /* + * IDE + */ +#ifdef CONFIG_CMD_IDE +#define __io +#define CONFIG_IDE_PREINIT +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_EXT2 +/* ED Mini V has an IDE-compatible SATA connector for port 1 */ +#define CONFIG_MVSATA_IDE +#define CONFIG_MVSATA_IDE_USE_PORT1 +/* Needs byte-swapping for ATA data register */ +#define CONFIG_IDE_SWAP_IO +/* Data, registers and alternate blocks are at the same offset */ +#define CONFIG_SYS_ATA_DATA_OFFSET (0x0100) +#define CONFIG_SYS_ATA_REG_OFFSET (0x0100) +#define CONFIG_SYS_ATA_ALT_OFFSET (0x0100) +/* Each 8-bit ATA register is aligned to a 4-bytes address */ +#define CONFIG_SYS_ATA_STRIDE 4 +/* Controller supports 48-bits LBA addressing */ +#define CONFIG_LBA48 +/* A single bus, a single device */ +#define CONFIG_SYS_IDE_MAXBUS 1 +#define CONFIG_SYS_IDE_MAXDEVICE 1 +/* ATA registers base is at SATA controller base */ +#define CONFIG_SYS_ATA_BASE_ADDR ORION5X_SATA_BASE +/* ATA bus 0 is orion5x port 1 on ED Mini V2 */ +#define CONFIG_SYS_ATA_IDE0_OFFSET ORION5X_SATA_PORT1_OFFSET +/* end of IDE defines */ +#endif /* CMD_IDE */ + +/* * Environment variables configurations */ #define CONFIG_ENV_IS_IN_FLASH 1 |