diff options
author | Heiko Schocher <hs@denx.de> | 2010-02-18 07:08:25 (GMT) |
---|---|---|
committer | Wolfgang Denk <wd@denx.de> | 2011-04-29 22:44:29 (GMT) |
commit | 62ddcf05e7d7d84498e1387b9b3b9597fe904070 (patch) | |
tree | c252a75c8d942dd7ad6e6b3a4e4a7761f2054845 /include/configs/kmeter1.h | |
parent | de3ad13de53fa678e5408d899dcfedec44780994 (diff) | |
download | u-boot-62ddcf05e7d7d84498e1387b9b3b9597fe904070.tar.xz |
mpc832x: add support for the mpc8321 based suvd3 board
- serial console on UART1
- Ethernet RMII over UCC4
- PHY SMSC LAN8700
- 64MB Flash
- 128 MB DDR2 RAM
- I2C
- bootcount
This board is similiar to the kmeter1 (8360) board,
so common config options are extracted into the
include/configs/km83xx-common.h file.
Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
cc: Kim Phillips <kim.phillips@freescale.com>
cc: Holger Brunck <holger.brunck@keymile.com>
cc: Valentin Longchamp <valentin.longchamp@keymile.com>
Diffstat (limited to 'include/configs/kmeter1.h')
-rw-r--r-- | include/configs/kmeter1.h | 332 |
1 files changed, 14 insertions, 318 deletions
diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h index a3c79a8..16278e1 100644 --- a/include/configs/kmeter1.h +++ b/include/configs/kmeter1.h @@ -27,30 +27,20 @@ #define CONFIG_MPC8360 /* MPC8360 CPU specific */ #define CONFIG_KMETER1 /* KMETER1 board specific */ #define CONFIG_HOSTNAME kmeter1 +#define CONFIG_KM_BOARD_NAME "kmeter1" #define CONFIG_SYS_TEXT_BASE 0xF0000000 #define CONFIG_KM_DEF_NETDEV \ "netdev=eth2\0" \ -/* include common defines/options for all Keymile boards */ -#include "keymile-common.h" -#include "km-powerpc.h" - -#define MTDIDS_DEFAULT "nor0=boot" -#define MTDPARTS_DEFAULT "mtdparts=" \ - "boot:" \ - "768k(u-boot)," \ - "128k(env)," \ - "128k(envred)," \ - "-(" CONFIG_KM_UBI_PARTITION_NAME ")" +/* include common defines/options for all 83xx Keymile boards */ +#include "km83xx-common.h" #define CONFIG_MISC_INIT_R /* - * System Clock Setup + * System IO Setup */ -#define CONFIG_83XX_CLKIN 66000000 -#define CONFIG_SYS_CLK_FREQ 66000000 -#define CONFIG_83XX_PCICLK 66000000 +#define CONFIG_SYS_SICRH (SICRH_UC1EOBI | SICRH_UC2E1OBI) /* * Hardware Reset Configuration Word @@ -71,55 +61,7 @@ HRCWH_LALE_EARLY | \ HRCWH_LDP_CLEAR ) -/* - * System IO Config - */ -#define CONFIG_SYS_SICRH 0x00000006 -#define CONFIG_SYS_SICRL 0x00000000 - -/* - * IMMR new address - */ -#define CONFIG_SYS_IMMR 0xE0000000 - -/* - * Bus Arbitration Configuration Register (ACR) - */ -#define CONFIG_SYS_ACR_PIPE_DEP 3 /* pipeline depth 4 transactions */ -#define CONFIG_SYS_ACR_RPTCNT 3 /* 4 consecutive transactions */ -#define CONFIG_SYS_ACR_APARK 0 /* park bus to master (below) */ -#define CONFIG_SYS_ACR_PARKM 3 /* parking master = QuiccEngine */ - -/* - * DDR Setup - */ -#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory */ -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE -#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE -#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \ - DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05) - -#define CFG_83XX_DDR_USES_CS0 - -#undef CONFIG_DDR_ECC - -/* - * DDRCDR - DDR Control Driver Register - */ - -#undef CONFIG_SPD_EEPROM /* Do not use SPD EEPROM for DDR setup */ - -/* - * Manually set up DDR parameters - */ -#define CONFIG_DDR_II -#define CONFIG_SYS_DDR_SIZE 2048 /* MB */ #define CONFIG_SYS_DDR_CS0_BNDS 0x0000007f -#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN | CSCONFIG_AP | \ - CSCONFIG_ROW_BIT_13 | \ - CSCONFIG_COL_BIT_10 | \ - CSCONFIG_ODT_WR_ACS) - #define CONFIG_SYS_DDR_SDRAM_CFG (SDRAM_CFG_SDRAM_TYPE_DDR2 | \ SDRAM_CFG_SREN) #define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000 @@ -127,6 +69,11 @@ #define CONFIG_SYS_DDR_INTERVAL ((0x080 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \ (0x3cf << SDRAM_INTERVAL_REFINT_SHIFT)) +#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN | CSCONFIG_AP | \ + CSCONFIG_ROW_BIT_13 | \ + CSCONFIG_COL_BIT_10 | \ + CSCONFIG_ODT_WR_ACS) + #define CONFIG_SYS_DDRCDR 0x40000001 #define CONFIG_SYS_DDR_MODE 0x47860452 #define CONFIG_SYS_DDR_MODE2 0x8080c000 @@ -159,32 +106,13 @@ #define CONFIG_SYS_DDR_TIMING_3 0x00000000 -/* - * The reserved memory - */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ -#define CONFIG_SYS_FLASH_BASE 0xF0000000 #define CONFIG_SYS_PIGGY_BASE 0xE8000000 #define CONFIG_SYS_PIGGY_SIZE 128 #define CONFIG_SYS_PAXE_BASE 0xA0000000 #define CONFIG_SYS_PAXE_SIZE 512 -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -#define CONFIG_SYS_RAMBOOT -#else -#undef CONFIG_SYS_RAMBOOT -#endif - -#define CONFIG_SYS_MONITOR_LEN (768 * 1024) /* Reserve for Mon */ - -/* - * Initial RAM Base Address Setup - */ -#define CONFIG_SYS_INIT_RAM_LOCK 1 -#define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) +/* EEprom support */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* * Local Bus Configuration & Clock Setup @@ -198,52 +126,9 @@ * * Bank Bus Machine PortSz Size Device * ---- --- ------- ------ ----- ------ - * 0 Local GPCM 16 bit 256MB FLASH - * 1 Local GPCM 8 bit 128MB GPIO/PIGGY * 3 Local GPCM 8 bit 512MB PAXE * */ -/* - * FLASH on the Local Bus - */ -#define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */ -#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ -#define CONFIG_SYS_FLASH_SIZE 256 /* max FLASH size is 256M */ -#define CONFIG_SYS_FLASH_PROTECTION 1 -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 - -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM 0x8000001b /* 256MB window size */ - -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ - (2 << BR_PS_SHIFT) | /* 16 bit port size */ \ - BR_V) - -#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) | \ - OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \ - OR_GPCM_SCY_5 | \ - OR_GPCM_TRLX | OR_GPCM_EAD) - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ -/* max num of sects on one chip */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } - -#undef CONFIG_SYS_FLASH_CHECKSUM - -/* - * PRIO1/PIGGY on the local bus CS1 - */ -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_PIGGY_BASE -#define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000001A /* 128MB window size */ - -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_PIGGY_BASE | \ - (1 << BR_PS_SHIFT) | /* 8 bit port size */ \ - BR_V) -#define CONFIG_SYS_OR1_PRELIM (MEG_TO_AM(CONFIG_SYS_PIGGY_SIZE) | \ - OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \ - OR_GPCM_SCY_2 | \ - OR_GPCM_TRLX | OR_GPCM_EAD) /* * PAXE on the local bus CS3 @@ -260,176 +145,14 @@ OR_GPCM_TRLX | OR_GPCM_EAD) /* - * Serial Port - */ -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600) - -/* Pass open firmware flat tree */ -#define CONFIG_OF_LIBFDT -#define CONFIG_OF_BOARD_SETUP -#define CONFIG_OF_STDOUT_VIA_ALIAS - -/* - * General PCI - * Addresses are mapped 1-1. - */ -#undef CONFIG_PCI /* No PCI */ - -#ifndef CONFIG_NET_MULTI -#define CONFIG_NET_MULTI -#endif -/* - * QE UEC ethernet configuration - */ -#define CONFIG_UEC_ETH -#define CONFIG_ETHPRIME "UEC0" - -#define CONFIG_UEC_ETH1 /* GETH1 */ -#define UEC_VERBOSE_DEBUG 1 - -#ifdef CONFIG_UEC_ETH1 -#define CONFIG_SYS_UEC1_UCC_NUM 3 /* UCC4 */ -#define CONFIG_SYS_UEC1_RX_CLK QE_CLK_NONE /* not used in RMII */ -#define CONFIG_SYS_UEC1_TX_CLK QE_CLK17 -#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH -#define CONFIG_SYS_UEC1_PHY_ADDR 0 -#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII -#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100 -#endif - -/* - * Environment - */ - -#ifndef CONFIG_SYS_RAMBOOT -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \ - CONFIG_SYS_MONITOR_LEN) -#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ -#define CONFIG_ENV_OFFSET (CONFIG_SYS_MONITOR_LEN) - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \ - CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - -#else /* CFG_RAMBOOT */ -#define CONFIG_SYS_NO_FLASH /* Flash is not usable now */ -#define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) -#define CONFIG_ENV_SIZE 0x2000 -#endif /* CFG_RAMBOOT */ - -/* I2C */ -#define CONFIG_HARD_I2C /* I2C with hardware support */ -#undef CONFIG_SOFT_I2C /* I2C bit-banged */ -#define CONFIG_FSL_I2C -#define CONFIG_SYS_I2C_SPEED 200000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F -#define CONFIG_SYS_I2C_OFFSET 0x3000 -#define CONFIG_I2C_MULTI_BUS 1 -#define CONFIG_I2C_MUX 1 - -/* EEprom support */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 - -/* I2C SYSMON (LM75, AD7414 is almost compatible) */ -#define CONFIG_DTT_LM75 /* ON Semi's LM75 */ -#define CONFIG_DTT_SENSORS {0, 1, 2, 3} /* Sensor addresses */ -#define CONFIG_SYS_DTT_MAX_TEMP 70 -#define CONFIG_SYS_DTT_LOW_TEMP -30 -#define CONFIG_SYS_DTT_HYSTERESIS 3 -#define CONFIG_SYS_DTT_BUS_NUM (CONFIG_SYS_MAX_I2C_BUS) - -#if defined(CONFIG_CMD_NAND) -#define CONFIG_NAND_KMETER1 -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE CONFIG_SYS_PIGGY_BASE -#endif - -#if defined(CONFIG_PCI) -#define CONFIG_CMD_PCI -#endif - -#if defined(CFG_RAMBOOT) -#undef CONFIG_CMD_SAVEENV -#undef CONFIG_CMD_LOADS -#endif - -/* - * For booting Linux, the board info and command line data - * have to be in the first 256 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (256 << 20) - -/* - * Core HID Setup - */ -#define CONFIG_SYS_HID0_INIT 0x000000000 -#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \ - HID0_ENABLE_INSTRUCTION_CACHE) -#define CONFIG_SYS_HID2 HID2_HBE - -/* * MMU Setup */ -#define CONFIG_HIGH_BATS /* High BATs supported */ - -/* DDR: cache cacheable */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | \ - BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | \ - BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U - -/* IMMRBAR & PCI IO: cache-inhibit and guarded */ -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_IMMR | BATL_PP_10 | \ - BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_IMMR | BATU_BL_4M | BATU_VS | \ - BATU_VP) -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U - -/* PRIO1, PIGGY: icache cacheable, but dcache-inhibit and guarded */ -#define CONFIG_SYS_IBAT2L (CONFIG_SYS_PIGGY_BASE | BATL_PP_10 | \ - BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT2U (CONFIG_SYS_PIGGY_BASE | BATU_BL_128M | \ - BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT2L (CONFIG_SYS_PIGGY_BASE | BATL_PP_10 | \ - BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U - -/* FLASH: icache cacheable, but dcache-inhibit and guarded */ -#define CONFIG_SYS_IBAT3L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \ - BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT3U (CONFIG_SYS_FLASH_BASE | BATU_BL_256M | \ - BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT3L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \ - BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U - -/* Stack in dcache: cacheable, no memory coherence */ -#define CONFIG_SYS_IBAT4L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10) -#define CONFIG_SYS_IBAT4U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | \ - BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L -#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U - /* PAXE: icache cacheable, but dcache-inhibit and guarded */ #define CONFIG_SYS_IBAT5L (CONFIG_SYS_PAXE_BASE | BATL_PP_10 | \ - BATL_MEMCOHERENCE) + BATL_MEMCOHERENCE) #define CONFIG_SYS_IBAT5U (CONFIG_SYS_PAXE_BASE | BATU_BL_256M | \ - BATU_VS | BATU_VP) + BATU_VS | BATU_VP) #define CONFIG_SYS_DBAT5L (CONFIG_SYS_PAXE_BASE | BATL_PP_10 | \ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) #define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U @@ -457,31 +180,4 @@ #define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U #endif /* CONFIG_PCI */ -#define BOOTFLASH_START F0000000 - -#define CONFIG_KM_CONSOLE_TTY "ttyS0" - -/* - * Environment Configuration - */ -#define CONFIG_ENV_OVERWRITE -#ifndef CONFIG_KM_DEF_ENV /* if not set by keymile-common.h */ -#define CONFIG_KM_DEF_ENV "km-common=empty\0" -#endif - -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_KM_DEF_ENV \ - "dtt_bus=pca9547:70:a\0" \ - "EEprom_ivm=pca9547:70:9\0" \ - "newenv=" \ - "prot off 0xF00C0000 +0x40000 && " \ - "era 0xF00C0000 +0x40000\0" \ - "rootpath=/opt/eldk/ppc_82xx\0" \ - "unlock=yes\0" \ - "" - -#if defined(CONFIG_UEC_ETH) -#define CONFIG_HAS_ETH0 -#endif - #endif /* __CONFIG_H */ |