armv7: Add support of ls1021a-iot board

The patch adds support for Freescale ls1021a-iot board.

Signed-off-by: Feng Li <feng.li_2@nxp.com>
[YS: rewrite commit message, fix whitespace in Kconfig]
Reviewed-by: York Sun <york.sun@nxp.com>

1 files changed, 367 insertions, 0 deletions

diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h
new file mode 100644
index 0000000..182a003
--- /dev/null
+++ b/include/configs/ls1021aiot.h
@@ -0,0 +1,367 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_LS102XA
+
+#define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR
+
+#define CONFIG_SYS_FSL_CLK
+
+#define CONFIG_BOARD_EARLY_INIT_F
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + 16 * 1024 * 1024)
+
+#define CONFIG_SYS_INIT_RAM_ADDR	OCRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE	OCRAM_SIZE
+
+/* XHCI Support - enabled by default */
+#define CONFIG_HAS_FSL_XHCI_USB
+
+#ifdef CONFIG_HAS_FSL_XHCI_USB
+#define CONFIG_USB_XHCI_FSL
+#define CONFIG_USB_XHCI_DWC3
+#define CONFIG_USB_MAX_CONTROLLER_COUNT		1
+#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS	2
+#endif
+
+#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_XHCI_USB)
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_EXT2
+#endif
+
+/*
+ * Generic Timer Definitions
+ */
+#define GENERIC_TIMER_CLK		12500000
+
+#define CONFIG_SYS_CLK_FREQ		100000000
+#define CONFIG_DDR_CLK_FREQ		100000000
+
+/*
+ * DDR: 800 MHz ( 1600 MT/s data rate )
+ */
+
+#define DDR_SDRAM_CFG			0x470c0008
+#define DDR_CS0_BNDS			0x008000bf
+#define DDR_CS0_CONFIG			0x80014302
+#define DDR_TIMING_CFG_0		0x50550004
+#define DDR_TIMING_CFG_1		0xbcb38c56
+#define DDR_TIMING_CFG_2		0x0040d120
+#define DDR_TIMING_CFG_3		0x010e1000
+#define DDR_TIMING_CFG_4		0x00000001
+#define DDR_TIMING_CFG_5		0x03401400
+#define DDR_SDRAM_CFG_2			0x00401010
+#define DDR_SDRAM_MODE			0x00061c60
+#define DDR_SDRAM_MODE_2		0x00180000
+#define DDR_SDRAM_INTERVAL		0x18600618
+#define DDR_DDR_WRLVL_CNTL		0x8655f605
+#define DDR_DDR_WRLVL_CNTL_2	0x05060607
+#define DDR_DDR_WRLVL_CNTL_3	0x05050505
+#define DDR_DDR_CDR1			0x80040000
+#define DDR_DDR_CDR2			0x00000001
+#define DDR_SDRAM_CLK_CNTL		0x02000000
+#define DDR_DDR_ZQ_CNTL			0x89080600
+#define DDR_CS0_CONFIG_2		0
+#define DDR_SDRAM_CFG_MEM_EN	0x80000000
+#define SDRAM_CFG2_D_INIT		0x00000010
+#define DDR_CDR2_VREF_TRAIN_EN	0x00000080
+#define SDRAM_CFG2_FRC_SR		0x80000000
+#define SDRAM_CFG_BI			0x00000001
+
+#ifdef CONFIG_RAMBOOT_PBL
+#define CONFIG_SYS_FSL_PBL_PBI	\
+	board/freescale/ls1021aiot/ls102xa_pbi.cfg
+#endif
+
+#ifdef CONFIG_SD_BOOT
+#define CONFIG_SYS_FSL_PBL_RCW	\
+	board/freescale/ls1021aiot/ls102xa_rcw_sd.cfg
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_LDSCRIPT	"arch/$(ARCH)/cpu/u-boot-spl.lds"
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_ENV_SUPPORT
+#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_WATCHDOG_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0xe8
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS		0x400
+
+#define CONFIG_SPL_TEXT_BASE	0x10000000
+#define CONFIG_SPL_MAX_SIZE		0x1a000
+#define CONFIG_SPL_STACK		0x1001d000
+#define CONFIG_SPL_PAD_TO		0x1c000
+#define CONFIG_SYS_TEXT_BASE	0x82000000
+
+#define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SYS_TEXT_BASE + \
+		CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
+#define CONFIG_SPL_BSS_START_ADDR	0x80100000
+#define CONFIG_SPL_BSS_MAX_SIZE		0x80000
+#define CONFIG_SYS_MONITOR_LEN		0x80000
+#define CONFIG_SYS_NO_FLASH
+#endif
+
+#ifdef CONFIG_QSPI_BOOT
+#define CONFIG_SYS_TEXT_BASE		0x40010000
+#endif
+
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
+#define CONFIG_SYS_NO_FLASH
+#endif
+
+#define CONFIG_NR_DRAM_BANKS		1
+
+#define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000UL
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
+
+#define CONFIG_FSL_CAAM			/* Enable CAAM */
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX		1
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		get_serial_clock()
+#define CONFIG_BAUDRATE			115200
+
+/*
+ * I2C
+ */
+#define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
+#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
+
+/* EEPROM */
+#define CONFIG_ID_EEPROM
+#define CONFIG_SYS_I2C_EEPROM_NXID
+#define CONFIG_SYS_EEPROM_BUS_NUM		0
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x51
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
+
+/*
+ * MMC
+ */
+#define CONFIG_MMC
+#define CONFIG_CMD_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_GENERIC_MMC
+
+/* SATA */
+#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_CMD_SCSI
+#define CONFIG_LIBATA
+#define CONFIG_SCSI_AHCI
+#define CONFIG_SCSI_AHCI_PLAT
+#ifndef PCI_DEVICE_ID_FREESCALE_AHCI
+#define PCI_DEVICE_ID_FREESCALE_AHCI	0x0440
+#endif
+#define CONFIG_SCSI_DEV_LIST		{PCI_VENDOR_ID_FREESCALE, \
+	PCI_DEVICE_ID_FREESCALE_AHCI}
+
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
+#define CONFIG_SYS_SCSI_MAX_LUN		1
+#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+		CONFIG_SYS_SCSI_MAX_LUN)
+
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+
+/* SPI */
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
+#define CONFIG_SPI_FLASH_SPANSION
+
+/* QSPI */
+#define QSPI0_AMBA_BASE			0x40000000
+#define FSL_QSPI_FLASH_SIZE		(1 << 24)
+#define FSL_QSPI_FLASH_NUM		2
+#define CONFIG_SPI_FLASH_BAR
+#define CONFIG_SPI_FLASH_SPANSION
+#endif
+
+/* DM SPI */
+#if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI)
+#define CONFIG_CMD_SF
+#define CONFIG_DM_SPI_FLASH
+#endif
+
+/*
+ * eTSEC
+ */
+#define CONFIG_TSEC_ENET
+
+#ifdef CONFIG_TSEC_ENET
+#define CONFIG_MII
+#define CONFIG_MII_DEFAULT_TSEC		1
+#define CONFIG_TSEC1			1
+#define CONFIG_TSEC1_NAME		"eTSEC1"
+#define CONFIG_TSEC2			1
+#define CONFIG_TSEC2_NAME		"eTSEC2"
+
+#define TSEC1_PHY_ADDR			1
+#define TSEC2_PHY_ADDR			3
+
+#define TSEC1_FLAGS			(TSEC_GIGABIT | TSEC_REDUCED)
+#define TSEC2_FLAGS			(TSEC_GIGABIT | TSEC_REDUCED)
+
+#define TSEC1_PHYIDX			0
+#define TSEC2_PHYIDX			0
+
+#define CONFIG_ETHPRIME			"eTSEC2"
+
+#define CONFIG_PHY_GIGE
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_ATHEROS
+
+#define CONFIG_HAS_ETH0
+#define CONFIG_HAS_ETH1
+#define CONFIG_HAS_ETH2
+#endif
+
+/* PCIe */
+#define CONFIG_PCI		/* Enable PCI/PCIE */
+#define CONFIG_PCIE1		/* PCIE controler 1 */
+#define CONFIG_PCIE2		/* PCIE controler 2 */
+
+/* Use common FSL Layerscape PCIe code */
+#define CONFIG_PCIE_LAYERSCAPE
+#define FSL_PCIE_COMPAT		"fsl,ls1021a-pcie"
+
+#define CONFIG_SYS_PCI_64BIT
+
+#define CONFIG_SYS_PCIE_CFG0_PHYS_OFF	0x00000000
+#define CONFIG_SYS_PCIE_CFG0_SIZE	0x00001000	/* 4k */
+#define CONFIG_SYS_PCIE_CFG1_PHYS_OFF	0x00001000
+#define CONFIG_SYS_PCIE_CFG1_SIZE	0x00001000	/* 4k */
+
+#define CONFIG_SYS_PCIE_IO_BUS		0x00000000
+#define CONFIG_SYS_PCIE_IO_PHYS_OFF	0x00010000
+#define CONFIG_SYS_PCIE_IO_SIZE		0x00010000	/* 64k */
+
+#define CONFIG_SYS_PCIE_MEM_BUS		0x08000000
+#define CONFIG_SYS_PCIE_MEM_PHYS_OFF	0x04000000
+#define CONFIG_SYS_PCIE_MEM_SIZE	0x08000000	/* 128M */
+
+#ifdef CONFIG_PCI
+#define CONFIG_PCI_PNP
+#define CONFIG_PCI_SCAN_SHOW
+#define CONFIG_CMD_PCI
+#endif
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
+
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_CMDLINE_EDITING
+
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT)
+#undef	CONFIG_CMD_IMLS
+#endif
+
+#define CONFIG_PEN_ADDR_BIG_ENDIAN
+#define CONFIG_LAYERSCAPE_NS_ACCESS
+#define CONFIG_SMP_PEN_ADDR		0x01ee0200
+#define CONFIG_TIMER_CLK_FREQ		12500000
+
+#define CONFIG_HWCONFIG
+#define HWCONFIG_BUFFER_SIZE		256
+
+#define CONFIG_FSL_DEVICE_DISABLE
+
+#define CONFIG_EXTRA_ENV_SETTINGS	\
+	"bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
+"initrd_high=0xffffffff\0"	\
+"fdt_high=0xffffffff\0"
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE		\
+	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
+
+#define CONFIG_CMD_GREPENV
+#define CONFIG_CMD_MEMINFO
+
+#define CONFIG_SYS_LOAD_ADDR		0x82000000
+
+#define CONFIG_LS102XA_STREAM_ID
+
+/*
+ * Stack sizes
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE		(30 * 1024)
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
+#else
+/* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+#endif
+
+#define CONFIG_SYS_QE_FW_ADDR	0x67f40000
+
+/*
+ * Environment
+ */
+
+#define CONFIG_ENV_OVERWRITE
+
+#if defined(CONFIG_SD_BOOT)
+#define CONFIG_ENV_OFFSET		0x100000
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV	0
+#define CONFIG_ENV_SIZE			0x2000
+#elif defined(CONFIG_QSPI_BOOT)
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SIZE			0x2000
+#define CONFIG_ENV_OFFSET		0x100000
+#define CONFIG_ENV_SECT_SIZE	0x10000
+#endif
+
+#define CONFIG_OF_BOARD_SETUP
+#define CONFIG_OF_STDOUT_VIA_ALIAS
+#define CONFIG_CMD_BOOTZ
+
+#define CONFIG_MISC_INIT_R
+
+/* Hash command with SHA acceleration supported in hardware */
+
+#ifdef CONFIG_FSL_CAAM
+
+#define CONFIG_CMD_HASH
+
+#define CONFIG_SHA_HW_ACCEL
+
+#endif
+
+#include <asm/fsl_secure_boot.h>
+
+#endif