diff options
author | wdenk <wdenk> | 2004-10-11 23:03:10 (GMT) |
---|---|---|
committer | wdenk <wdenk> | 2004-10-11 23:03:10 (GMT) |
commit | 4cfaf55e5cd3d7d21a7f9c48508eb7be0167e638 (patch) | |
tree | 94bd762d02b2d183f7a1ea81f179df4f2fa53c80 /include/configs | |
parent | d407bf52b5dfb96816969c126f14b35df1f233ae (diff) | |
download | u-boot-4cfaf55e5cd3d7d21a7f9c48508eb7be0167e638.tar.xz |
* Enable NAND flash support for NC650 board.
* Patch by Thomas Lange 07 Oct 2004:
Updated README for DBAu1x00 boards to match current status
Diffstat (limited to 'include/configs')
-rw-r--r-- | include/configs/NC650.h | 52 |
1 files changed, 43 insertions, 9 deletions
diff --git a/include/configs/NC650.h b/include/configs/NC650.h index 48bea69..8f52014 100644 --- a/include/configs/NC650.h +++ b/include/configs/NC650.h @@ -96,8 +96,8 @@ /* * Software (bit-bang) I2C driver configuration */ -#define SCL 0x10000000 /* PA 3 */ -#define SDA 0x40000000 /* PA 1 */ +#define SCL 0x1000 /* PA 3 */ +#define SDA 0x2000 /* PA 2 */ #define PAR immr->im_ioport.iop_papar #define DIR immr->im_ioport.iop_padir @@ -111,19 +111,16 @@ else DAT &= ~SDA #define I2C_SCL(bit) if (bit) DAT |= SCL; \ else DAT &= ~SCL -#define I2C_DELAY udelay(50) /* 1/4 I2C clock duration */ +#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ -#define CFG_I2C_EEPROM_ADDR 0x50 -#define CFG_I2C_EEPROM_ADDR_LEN 1 -#define CFG_EEPROM_PAGE_WRITE_BITS 4 /* 16 bytes page write mode */ - -#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ +#define CONFIG_RTC_PCF8563 +#define CFG_I2C_RTC_ADDR 0x51 #define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ CFG_CMD_ASKENV | \ CFG_CMD_DHCP | \ - CFG_CMD_EEPROM | \ CFG_CMD_I2C | \ + CFG_CMD_NAND | \ CFG_CMD_DATE ) /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ @@ -216,6 +213,31 @@ #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif +/* + * NAND flash support + */ +#define CFG_MAX_NAND_DEVICE 1 +#define NAND_ChipID_UNKNOWN 0x00 +#define SECTORSIZE 512 +#define NAND_MAX_FLOORS 1 +#define NAND_MAX_CHIPS 1 +#define ADDR_PAGE 2 +#define ADDR_COLUMN_PAGE 3 +#define ADDR_COLUMN 1 +#define NAND_NO_RB + +#define NAND_WAIT_READY(nand) udelay(12) +#define WRITE_NAND_COMMAND(d, adr) WRITE_NAND(d, adr + 2) +#define WRITE_NAND_ADDRESS(d, adr) WRITE_NAND(d, adr + 1) +#define WRITE_NAND(d, adr) (*(volatile uint8_t *)(adr) = (uint8_t)(d)) +#define READ_NAND(adr) (*(volatile uint8_t *)(adr)) +#define NAND_DISABLE_CE(nand) /* nop */ +#define NAND_ENABLE_CE(nand) /* nop */ +#define NAND_CTL_CLRALE(nandptr) /* nop */ +#define NAND_CTL_SETALE(nandptr) /* nop */ +#define NAND_CTL_CLRCLE(nandptr) /* nop */ +#define NAND_CTL_SETCLE(nandptr) /* nop */ + /*----------------------------------------------------------------------- * SYPCR - System Protection Control 11-9 * SYPCR can only be written once after reset! @@ -287,6 +309,18 @@ #define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V) /* + * BR2 and OR2 (NAND Flash) + */ +#define CFG_NAND_BASE 0x50000000 +#define CFG_NAND_SIZE 0x04000000 + +#define CFG_OR_TIMING_NAND (OR_CSNT_SAM | OR_ACS_DIV1 | OR_BI | \ + OR_SCY_15_CLK | OR_EHTR | OR_TRLX) + +#define CFG_BR2_PRELIM ((CFG_NAND_BASE & BR_BA_MSK) | BR_PS_8 | BR_V ) +#define CFG_OR2_PRELIM (((-CFG_NAND_SIZE) & OR_AM_MSK) | CFG_OR_TIMING_NAND) + +/* * BR3 and OR3 (SDRAM) */ #define SDRAM_BASE3_PRELIM 0x00000000 /* SDRAM bank */ |