diff options
author | Jon Loeliger <jdl@freescale.com> | 2008-07-10 17:05:32 (GMT) |
---|---|---|
committer | Jon Loeliger <jdl@freescale.com> | 2008-07-10 17:05:32 (GMT) |
commit | 859f24350e6e4313626f85161dd03f025a4dac59 (patch) | |
tree | a025f68619045556e662326c8e1cbc147f9b633e /include/configs | |
parent | 3473ab737282b08ad61841fcbb14c4d264a93a8e (diff) | |
parent | e0320b1ebec13755911a53b0af12cbf3e5e49a65 (diff) | |
download | u-boot-859f24350e6e4313626f85161dd03f025a4dac59.tar.xz |
Merge commit 'wd/master'
Diffstat (limited to 'include/configs')
-rw-r--r-- | include/configs/MPC8260ADS.h | 7 | ||||
-rw-r--r-- | include/configs/MPC8349EMDS.h | 1 | ||||
-rw-r--r-- | include/configs/MVBLM7.h | 7 | ||||
-rw-r--r-- | include/configs/MigoR.h | 4 | ||||
-rw-r--r-- | include/configs/atngw100.h | 7 | ||||
-rw-r--r-- | include/configs/atstk1002.h | 1 | ||||
-rw-r--r-- | include/configs/atstk1003.h | 1 | ||||
-rw-r--r-- | include/configs/atstk1004.h | 1 | ||||
-rw-r--r-- | include/configs/atstk1006.h | 1 | ||||
-rw-r--r-- | include/configs/davinci_sffsdr.h | 150 | ||||
-rw-r--r-- | include/configs/katmai.h | 7 | ||||
-rw-r--r-- | include/configs/korat.h | 11 | ||||
-rw-r--r-- | include/configs/ml300.h | 1 | ||||
-rw-r--r-- | include/configs/ms7722se.h | 4 | ||||
-rw-r--r-- | include/configs/r2dplus.h | 42 | ||||
-rw-r--r-- | include/configs/r7780mp.h | 41 | ||||
-rw-r--r-- | include/configs/sacsng.h | 12 | ||||
-rw-r--r-- | include/configs/sh7763rdp.h | 10 |
18 files changed, 227 insertions, 81 deletions
diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h index 23508f9..59d0bdb 100644 --- a/include/configs/MPC8260ADS.h +++ b/include/configs/MPC8260ADS.h @@ -197,6 +197,13 @@ #define CONFIG_BAUDRATE 115200 +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 +#if defined(CONFIG_OF_LIBFDT) +#define OF_CPU "cpu@0" +#define OF_TBCLK (bd->bi_busfreq / 4) +#endif + /* * BOOTP options */ diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 37e3ca4..8705838 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -355,7 +355,6 @@ /* SPI */ #define CONFIG_MPC8XXX_SPI -#define CONFIG_HARD_SPI /* SPI with hardware support */ #undef CONFIG_SOFT_SPI /* SPI bit-banged */ /* GPIOs. Used as SPI chip selects */ diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h index 349ca14..b412655 100644 --- a/include/configs/MVBLM7.h +++ b/include/configs/MVBLM7.h @@ -27,7 +27,7 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define MV_VERSION "v1.0.1" +#include <version.h> /* * High Level Configuration Options @@ -262,7 +262,7 @@ #define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR+CFG_ENV_SIZE) #define CFG_ENV_SIZE_REDUND CFG_ENV_SIZE -#define CONFIG_LOADS_ECHO +#define CONFIG_LOADS_ECHO #define CFG_LOADS_BAUD_CHANGE /* @@ -336,6 +336,7 @@ #define CFG_HID0_FINAL CFG_HID0_INIT #define CFG_HID2 HID2_HBE +#define CONFIG_HIGH_BATS 1 /* DDR */ #define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) @@ -446,7 +447,7 @@ "mv_dtb_addr=" MV_DTB_ADDR "\0" \ "mv_dtb_addr_ram=" MV_DTB_ADDR_RAM "\0" \ "dtb_name=" MV_DTB_NAME "\0" \ - "mv_version=" MV_VERSION "\0" \ + "mv_version=" U_BOOT_VERSION "\0" \ "dhcp_client_id=" MV_CI "\0" \ "dhcp_vendor-class-identifier=" MV_VCI "\0" \ "netretry=no\0" \ diff --git a/include/configs/MigoR.h b/include/configs/MigoR.h index 99e1179..fa0e5db 100644 --- a/include/configs/MigoR.h +++ b/include/configs/MigoR.h @@ -45,10 +45,6 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "console=ttySC0,115200 root=1f01" -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_IPADDR 192.168.10.100 -#define CONFIG_SERVERIP 192.168.10.77 -#define CONFIG_GATEWAYIP 192.168.10.77 #define CONFIG_VERSION_VARIABLE #undef CONFIG_SHOW_BOOT_PROGRESS diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h index 3fc9975..84d235e 100644 --- a/include/configs/atngw100.h +++ b/include/configs/atngw100.h @@ -114,6 +114,8 @@ #define CONFIG_CMD_FAT #define CONFIG_CMD_JFFS2 #define CONFIG_CMD_MMC +#define CONFIG_CMD_SF +#define CONFIG_CMD_SPI #undef CONFIG_CMD_AUTOSCRIPT #undef CONFIG_CMD_FPGA @@ -126,6 +128,11 @@ #define CFG_NR_PIOS 5 #define CFG_HSDRAMC 1 #define CONFIG_MMC 1 +#define CONFIG_ATMEL_MCI 1 +#define CONFIG_ATMEL_SPI 1 + +#define CONFIG_SPI_FLASH 1 +#define CONFIG_SPI_FLASH_ATMEL 1 #define CFG_DCACHE_LINESZ 32 #define CFG_ICACHE_LINESZ 32 diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h index ba18eb6..90910bb 100644 --- a/include/configs/atstk1002.h +++ b/include/configs/atstk1002.h @@ -153,6 +153,7 @@ #define CFG_NR_PIOS 5 #define CFG_HSDRAMC 1 #define CONFIG_MMC 1 +#define CONFIG_ATMEL_MCI 1 #define CFG_DCACHE_LINESZ 32 #define CFG_ICACHE_LINESZ 32 diff --git a/include/configs/atstk1003.h b/include/configs/atstk1003.h index a528ddf..03472a8 100644 --- a/include/configs/atstk1003.h +++ b/include/configs/atstk1003.h @@ -136,6 +136,7 @@ #define CONFIG_PIO2 1 #define CFG_HSDRAMC 1 #define CONFIG_MMC 1 +#define CONFIG_ATMEL_MCI 1 #define CFG_DCACHE_LINESZ 32 #define CFG_ICACHE_LINESZ 32 diff --git a/include/configs/atstk1004.h b/include/configs/atstk1004.h index fc9585e..07add82 100644 --- a/include/configs/atstk1004.h +++ b/include/configs/atstk1004.h @@ -136,6 +136,7 @@ #define CONFIG_PIO2 1 #define CFG_HSDRAMC 1 #define CONFIG_MMC 1 +#define CONFIG_ATMEL_MCI 1 #define CFG_DCACHE_LINESZ 32 #define CFG_ICACHE_LINESZ 32 diff --git a/include/configs/atstk1006.h b/include/configs/atstk1006.h index 9fd49a5..f9af675 100644 --- a/include/configs/atstk1006.h +++ b/include/configs/atstk1006.h @@ -153,6 +153,7 @@ #define CFG_NR_PIOS 5 #define CFG_HSDRAMC 1 #define CONFIG_MMC 1 +#define CONFIG_ATMEL_MCI 1 #define CFG_DCACHE_LINESZ 32 #define CFG_ICACHE_LINESZ 32 diff --git a/include/configs/davinci_sffsdr.h b/include/configs/davinci_sffsdr.h new file mode 100644 index 0000000..0e49e6c --- /dev/null +++ b/include/configs/davinci_sffsdr.h @@ -0,0 +1,150 @@ +/* + * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> + * + * Copyright (C) 2008 Lyrtech <www.lyrtech.com> + * Copyright (C) 2008 Philip Balister, OpenSDR <philip@opensdr.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H +#include <asm/sizes.h> + +/* Board */ +#define SFFSDR +#define CFG_NAND_LARGEPAGE +#define CFG_USE_NAND +#define CFG_USE_DSPLINK /* This is to prevent U-Boot from + * powering ON the DSP. */ +/* SoC Configuration */ +#define CONFIG_ARM926EJS /* arm926ejs CPU core */ +#define CONFIG_SYS_CLK_FREQ 297000000 /* Arm Clock frequency */ +#define CFG_TIMERBASE 0x01c21400 /* use timer 0 */ +#define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */ +#define CFG_HZ 1000 +/* EEPROM definitions for Atmel 24LC64 EEPROM chip */ +#define CFG_I2C_EEPROM_ADDR_LEN 2 +#define CFG_I2C_EEPROM_ADDR 0x50 +#define CFG_EEPROM_PAGE_WRITE_BITS 5 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20 +/* Memory Info */ +#define CFG_MALLOC_LEN (0x10000 + 256*1024) /* malloc() len */ +#define CFG_GBL_DATA_SIZE 128 /* reserved for initial data */ +#define CFG_MEMTEST_START 0x80000000 /* memtest start address */ +#define CFG_MEMTEST_END 0x81000000 /* 16MB RAM test */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define CONFIG_STACKSIZE (256*1024) /* regular stack */ +#define PHYS_SDRAM_1 0x80000000 /* DDR Start */ +#define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */ +#define DDR_4BANKS /* 4-bank DDR2 (128MB) */ +/* Serial Driver info */ +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 4 /* NS16550 register size */ +#define CFG_NS16550_COM1 0x01c20000 /* Base address of UART0 */ +#define CFG_NS16550_CLK 27000000 /* Input clock to NS16550 */ +#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ +#define CONFIG_BAUDRATE 115200 /* Default baud rate */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +/* I2C Configuration */ +#define CONFIG_HARD_I2C +#define CONFIG_DRIVER_DAVINCI_I2C +#define CFG_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */ +#define CFG_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ +/* Network & Ethernet Configuration */ +#define CONFIG_DRIVER_TI_EMAC +#define CONFIG_MII +#define CONFIG_BOOTP_DEFAULT +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_NET_RETRY_COUNT 10 +#define CONFIG_OVERWRITE_ETHADDR_ONCE +/* Flash & Environment */ +#undef CFG_ENV_IS_IN_FLASH +#define CFG_NO_FLASH +#define CFG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */ +#define CFG_ENV_SECT_SIZE 2048 /* Env sector Size */ +#define CFG_ENV_SIZE SZ_128K +#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ +#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ +#define CFG_NAND_BASE 0x02000000 +#define CFG_NAND_HW_ECC +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_MAX_CHIPS 1 +#define CFG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */ +/* I2C switch definitions for PCA9543 chip */ +#define CFG_I2C_PCA9543_ADDR 0x70 +#define CFG_I2C_PCA9543_ADDR_LEN 0 /* Single register. */ +#define CFG_I2C_PCA9543_ENABLE_CH0 0x01 /* Enable channel 0. */ +/* U-Boot general configuration */ +#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ +#define CONFIG_MISC_INIT_R +#define CONFIG_BOOTDELAY 5 /* Autoboot after 5 seconds. */ +#define CONFIG_BOOTFILE "uImage" /* Boot file name */ +#define CFG_PROMPT "U-Boot > " /* Monitor Command Prompt */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CFG_PBSIZE \ + (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* Print buffer size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_LOAD_ADDR 0x80700000 /* Default Linux kernel + * load address. */ +#define CONFIG_VERSION_VARIABLE +#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, + * may be later */ +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#define CONFIG_CMDLINE_EDITING +#define CFG_LONGHELP +#define CONFIG_CRC32_VERIFY +#define CONFIG_MX_CYCLIC +/* Linux Information */ +#define LINUX_BOOT_PARAM_ADDR 0x80000100 +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_BOOTARGS \ + "mem=56M " \ + "console=ttyS0,115200n8 " \ + "root=/dev/nfs rw noinitrd ip=dhcp " \ + "nfsroot=${serverip}:/nfsroot/sffsdr " \ + "eth0=${ethaddr}" +#define CONFIG_BOOTCOMMAND \ + "nand read 87A00000 100000 300000;" \ + "bootelf 87A00000" +/* U-Boot commands */ +#include <config_cmd_default.h> +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_NAND +#define CONFIG_CMD_EEPROM +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_SETGETDCR +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_IMLS +/* KGDB support (if any) */ +#ifdef CONFIG_CMD_KGDB +#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ +#endif +#endif /* __CONFIG_H */ diff --git a/include/configs/katmai.h b/include/configs/katmai.h index d3789bd..f07e470 100644 --- a/include/configs/katmai.h +++ b/include/configs/katmai.h @@ -41,6 +41,13 @@ #define CFG_4xx_RESET_TYPE 0x2 /* use chip reset on this board */ /* + * Enable this board for more than 2GB of SDRAM + */ +#define CONFIG_PHYS_64BIT +#define CONFIG_VERY_BIG_RAM +#define CONFIG_MAX_MEM_MAPPED ((phys_size_t)2 << 30) + +/* * Include common defines/options for all AMCC eval boards */ #define CONFIG_HOSTNAME katmai diff --git a/include/configs/korat.h b/include/configs/korat.h index 7655666..4ca4ed0 100644 --- a/include/configs/korat.h +++ b/include/configs/korat.h @@ -129,7 +129,7 @@ #define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ #define CFG_ENV_ADDR (CFG_FLASH1_TOP - CFG_ENV_SECT_SIZE) -#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ +#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ /* Address and size of Redundant Environment Sector */ #define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR - CFG_ENV_SECT_SIZE) @@ -145,7 +145,6 @@ #define CONFIG_DDR_ECC /* Use ECC when available */ #define SPD_EEPROM_ADDRESS {0x50} #define CONFIG_PROG_SDRAM_TLB -#define CFG_DRAM_TEST #define CFG_MEM_TOP_HIDE (4 << 10) /* don't use last 4kbytes */ /* 440EPx errata CHIP 11 */ @@ -185,7 +184,7 @@ #define CFG_ROOTPATH "rootpath=/opt/eldk/ppc_4xxFP\0" /* Note: kernel_addr and ramdisk_addr assume that FLASH1 is 64 MiB. */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CONFIG_EXTRA_ENV_SETTINGS \ CFG_BOOTFILE \ CFG_ROOTPATH \ "netdev=eth0\0" \ @@ -216,7 +215,7 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ -#define CONFIG_IBM_EMAC4_V4 1 +#define CONFIG_IBM_EMAC4_V4 1 #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 2 /* PHY address, See schematics */ #define CONFIG_PHY_DYNAMIC_ANEG 1 @@ -548,4 +547,8 @@ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif +/* Pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 + #endif /* __CONFIG_H */ diff --git a/include/configs/ml300.h b/include/configs/ml300.h index 1945918..319923a 100644 --- a/include/configs/ml300.h +++ b/include/configs/ml300.h @@ -54,6 +54,7 @@ #define CONFIG_405 1 /* This is a PPC405 CPU */ #define CONFIG_4xx 1 /* ...member of PPC4xx family */ +#define CONFIG_XILINX_405 1 #define CONFIG_XILINX_ML300 1 /* ...on a Xilinx ML300 board */ #define CONFIG_SYSTEMACE 1 diff --git a/include/configs/ms7722se.h b/include/configs/ms7722se.h index 8d92a13..7298e55 100644 --- a/include/configs/ms7722se.h +++ b/include/configs/ms7722se.h @@ -40,10 +40,6 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "console=ttySC0,115200 root=1f01" -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_IPADDR 192.168.0.22 -#define CONFIG_SERVERIP 192.168.0.1 -#define CONFIG_GATEWAYIP 192.168.0.1 #define CONFIG_VERSION_VARIABLE #undef CONFIG_SHOW_BOOT_PROGRESS diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h index c20baca..e269336 100644 --- a/include/configs/r2dplus.h +++ b/include/configs/r2dplus.h @@ -35,12 +35,6 @@ #define CONFIG_BOOTARGS "console=ttySC0,115200" #define CONFIG_ENV_OVERWRITE 1 -/* Network setting */ -#define CONFIG_NETMASK 255.0.0.0 -#define CONFIG_IPADDR 10.0.192.51 -#define CONFIG_SERVERIP 10.0.0.1 -#define CONFIG_GATEWAYIP 10.0.0.1 - /* SDRAM */ #define CFG_SDRAM_BASE (0x8C000000) #define CFG_SDRAM_SIZE (0x04000000) @@ -60,45 +54,27 @@ #define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 32 * 1024 * 1024) /* Address of u-boot image in Flash */ #define CFG_MONITOR_BASE (CFG_FLASH_BASE) -#define CFG_MONITOR_LEN (128 * 1024) +#define CFG_MONITOR_LEN (256 * 1024) /* Size of DRAM reserved for malloc() use */ -#define CFG_MALLOC_LEN (256 * 1024) +#define CFG_MALLOC_LEN (1024 * 1024) /* size in bytes reserved for initial data */ #define CFG_GBL_DATA_SIZE (256) #define CFG_BOOTMAPSZ (8 * 1024 * 1024) /* - * NOR Flash + * NOR Flash ( Spantion S29GL256P ) */ #define CFG_FLASH_CFI #define CFG_FLASH_CFI_DRIVER - -#if defined(CONFIG_R2DPLUS_OLD) -#define CFG_FLASH_BASE (0xA0000000) -#define CFG_MAX_FLASH_BANKS (1) /* Max number of - * Flash memory banks - */ -#define CFG_MAX_FLASH_SECT 142 -#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } - -#else /* CONFIG_R2DPLUS_OLD */ - #define CFG_FLASH_BASE (0xA0000000) -#define CFG_FLASH_CFI_WIDTH 0x04 /* 32bit */ -#define CFG_MAX_FLASH_BANKS (2) -#define CFG_MAX_FLASH_SECT 270 -#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE,\ - CFG_FLASH_BASE + 0x100000,\ - CFG_FLASH_BASE + 0x400000,\ - CFG_FLASH_BASE + 0x700000, } -#endif /* CONFIG_R2DPLUS_OLD */ +#define CFG_MAX_FLASH_BANKS (1) +#define CFG_MAX_FLASH_SECT 256 +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } #define CFG_ENV_IS_IN_FLASH -#define CFG_ENV_SECT_SIZE 0x20000 -#define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE) -#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) -#define CFG_FLASH_ERASE_TOUT 120000 -#define CFG_FLASH_WRITE_TOUT 500 +#define CFG_ENV_SECT_SIZE 0x40000 +#define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE) +#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) /* * SuperH Clock setting diff --git a/include/configs/r7780mp.h b/include/configs/r7780mp.h index 4e89580..4c82c5a 100644 --- a/include/configs/r7780mp.h +++ b/include/configs/r7780mp.h @@ -1,7 +1,7 @@ /* * Configuation settings for the Renesas R7780MP board * - * Copyright (C) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * Copyright (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> * Copyright (C) 2008 Yusuke Goda <goda.yusuke@renesas.com> * * See file CREDITS for list of people who contributed to this @@ -31,7 +31,8 @@ #define CONFIG_SH4A 1 #define CONFIG_CPU_SH7780 1 #define CONFIG_R7780MP 1 -#define __LITTLE_ENDIAN 1 +#define CFG_R7780MP_OLD_FLASH 1 +#define __LITTLE_ENDIAN__ 1 /* * Command line configuration. @@ -59,12 +60,6 @@ /* check for keypress on bootdelay==0 */ /*#define CONFIG_ZERO_BOOTDELAY_CHECK*/ -/* Network setting */ -#define CONFIG_NETMASK 255.0.0.0 -#define CONFIG_IPADDR 10.0.192.82 -#define CONFIG_SERVERIP 10.0.0.1 -#define CONFIG_GATEWAYIP 10.0.0.1 - #define CFG_SDRAM_BASE (0x08000000) #define CFG_SDRAM_SIZE (128 * 1024 * 1024) @@ -80,22 +75,30 @@ #define CFG_MEMTEST_START (CFG_SDRAM_BASE) #define CFG_MEMTEST_END (TEXT_BASE - 0x100000) -/* NOR Flash (S29PL127J60TFI130) */ +/* Flash board support */ #define CFG_FLASH_BASE (0xA0000000) -#define CFG_FLASH_CFI_WIDTH FLASH_CFI_32BIT -#define CFG_MAX_FLASH_BANKS (2) -#define CFG_MAX_FLASH_SECT 270 -#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE,\ +#ifdef CFG_R7780MP_OLD_FLASH +/* NOR Flash (S29PL127J60TFI130) */ +# define CFG_FLASH_CFI_WIDTH FLASH_CFI_32BIT +# define CFG_MAX_FLASH_BANKS (2) +# define CFG_MAX_FLASH_SECT 270 +# define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE,\ CFG_FLASH_BASE + 0x100000,\ CFG_FLASH_BASE + 0x400000,\ CFG_FLASH_BASE + 0x700000, } +#else /* CFG_R7780MP_OLD_FLASH */ +/* NOR Flash (Spantion S29GL256P) */ +# define CFG_MAX_FLASH_BANKS (1) +# define CFG_MAX_FLASH_SECT 256 +# define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } +#endif /* CFG_R7780MP_OLD_FLASH */ #define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 4 * 1024 * 1024) /* Address of u-boot image in Flash */ #define CFG_MONITOR_BASE (CFG_FLASH_BASE) -#define CFG_MONITOR_LEN (112 * 1024) +#define CFG_MONITOR_LEN (256 * 1024) /* Size of DRAM reserved for malloc() use */ -#define CFG_MALLOC_LEN (256 * 1024) +#define CFG_MALLOC_LEN (1204 * 1024) /* size in bytes reserved for initial data */ #define CFG_GBL_DATA_SIZE (256) @@ -110,7 +113,7 @@ #define CFG_FLASH_EMPTY_INFO #define CFG_ENV_IS_IN_FLASH -#define CFG_ENV_SECT_SIZE (16 * 1024) +#define CFG_ENV_SECT_SIZE (256 * 1024) #define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE) #define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) #define CFG_FLASH_ERASE_TOUT 120000 @@ -141,8 +144,10 @@ #endif /* CONFIG_CMD_PCI */ #if defined(CONFIG_CMD_NET) -/* #define CONFIG_NET_MULTI - #define CONFIG_RTL8169 */ +/* +#define CONFIG_NET_MULTI +#define CONFIG_RTL8169 +*/ /* AX88696L Support(NE2000 base chip) */ #define CONFIG_DRIVER_NE2000 #define CONFIG_DRIVER_AX88796L diff --git a/include/configs/sacsng.h b/include/configs/sacsng.h index 4974fb4..2a398e8 100644 --- a/include/configs/sacsng.h +++ b/include/configs/sacsng.h @@ -272,10 +272,14 @@ #undef SPI_INIT /* no port initialization needed */ #define SPI_READ ((immr->im_ioport.iop_pdatd & I2C_MISO) != 0) -#define SPI_SDA(bit) if(bit) immr->im_ioport.iop_pdatd |= I2C_MOSI; \ - else immr->im_ioport.iop_pdatd &= ~I2C_MOSI -#define SPI_SCL(bit) if(bit) immr->im_ioport.iop_pdatd |= I2C_SCLK; \ - else immr->im_ioport.iop_pdatd &= ~I2C_SCLK +#define SPI_SDA(bit) do { \ + if(bit) immr->im_ioport.iop_pdatd |= I2C_MOSI; \ + else immr->im_ioport.iop_pdatd &= ~I2C_MOSI; \ + } while (0) +#define SPI_SCL(bit) do { \ + if(bit) immr->im_ioport.iop_pdatd |= I2C_SCLK; \ + else immr->im_ioport.iop_pdatd &= ~I2C_SCLK; \ + } while (0) #define SPI_DELAY /* No delay is needed */ #endif /* CONFIG_SOFT_SPI */ diff --git a/include/configs/sh7763rdp.h b/include/configs/sh7763rdp.h index d537071..7713eaa 100644 --- a/include/configs/sh7763rdp.h +++ b/include/configs/sh7763rdp.h @@ -38,11 +38,7 @@ #define CONFIG_CMD_SDRAM #define CONFIG_CMD_FLASH #define CONFIG_CMD_MEMORY -#define CONFIG_CMD_NET -#define CONFIG_CMD_PING #define CONFIG_CMD_ENV -#define CONFIG_CMD_NFS -#define CONFIG_CMD_JFFS2 #define CONFIG_BOOTDELAY -1 #define CONFIG_BOOTARGS "console=ttySC2,115200 root=1f01" @@ -66,12 +62,6 @@ #define CFG_BAUDRATE_TABLE { 115200 } /* List of legal baudrate settings for this board */ -/* Ethernet */ -#define CONFIG_SH_ETHER 1 -#define CONFIG_SH_ETHER_USE_PORT (1) -#define CONFIG_SH_ETHER_PHY_ADDR (0x01) -#define CFG_RX_ETH_BUFFER (8) - /* SDRAM */ #define CFG_SDRAM_BASE (0x8C000000) #define CFG_SDRAM_SIZE (64 * 1024 * 1024) |