power: pmic: append rk818 regs to rk808

Both RK808 and RK818 chips are using a similar register map,
so we can reuse them.

I have also add reg prefix to exist registers, to keep them same style.

Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

1 files changed, 134 insertions, 30 deletions

diff --git a/include/power/rk808_pmic.h b/include/power/rk808_pmic.h
index fb0800b..d29c2b3 100644
--- a/include/power/rk808_pmic.h
+++ b/include/power/rk808_pmic.h
@@ -9,12 +9,37 @@
 #define _PMIC_RK808_H_
 
 enum {
-	REG_DCDC_EN			= 0x23,
+	REG_SECONDS			= 0x00,
+	REG_MINUTES,
+	REG_HOURS,
+	REG_DAYS,
+	REG_MONTHS,
+	REG_YEARS,
+	REG_WEEKS,
+	REG_ALARM_SECONDS,
+	REG_ALARM_MINUTES,
+	REG_ALARM_HOURS,
+	REG_ALARM_DAYS,
+	REG_ALARM_MONTHS,
+	REG_ALARM_YEARS,
+
+	REG_RTC_CTRL			= 0x10,
+	REG_RTC_STATUS,
+	REG_RTC_INT,
+	REG_RTC_COMP_LSB,
+	REG_RTC_COMP_MSB,
+
+	ID_MSB				= 0x17,
+	ID_LSB,
+
+	REG_CLK32OUT			= 0x20,
+	REG_VB_MON,
+	REG_THERMAL,
+	REG_DCDC_EN,
 	REG_LDO_EN,
 	REG_SLEEP_SET_OFF1,
 	REG_SLEEP_SET_OFF2,
 	REG_DCDC_UV_STS,
-
 	REG_DCDC_UV_ACT,
 	REG_LDO_UV_STS,
 	REG_LDO_UV_ACT,
@@ -23,7 +48,6 @@ enum {
 	REG_VOUT_MON_TDB,
 	REG_BUCK1_CONFIG,
 	REG_BUCK1_ON_VSEL,
-
 	REG_BUCK1_SLP_VSEL,
 	REG_BUCK1_DVS_VSEL,
 	REG_BUCK2_CONFIG,
@@ -32,37 +56,117 @@ enum {
 	REG_BUCK2_DVS_VSEL,
 	REG_BUCK3_CONFIG,
 	REG_BUCK4_CONFIG,
-
 	REG_BUCK4_ON_VSEL,
 	REG_BUCK4_SLP_VSEL,
-	LDO1_ON_VSEL			= 0x3b,
-	LDO1_SLP_VSEL,
-	LDO2_ON_VSEL,
-	LDO2_SLP_VSEL,
-	LDO3_ON_VSEL,
-
-	LDO3_SLP_VSEL,
-	LDO4_ON_VSEL,
-	LDO4_SLP_VSEL,
-	LDO5_ON_VSEL,
-	LDO5_SLP_VSEL,
-	LDO6_ON_VSEL,
-	LDO6_SLP_VSEL,
-	LDO7_ON_VSEL,
-
-	LDO7_SLP_VSEL,
-	LDO8_ON_VSEL,
-	LDO8_SLP_VSEL,
-	DEVCTRL,
-	INT_STS1,
-	INT_STS_MSK1,
-	INT_STS2,
-	INT_STS_MSK2,
-	IO_POL,
+	REG_BOOST_CONFIG_REG,
+	REG_LDO1_ON_VSEL,
+	REG_LDO1_SLP_VSEL,
+	REG_LDO2_ON_VSEL,
+	REG_LDO2_SLP_VSEL,
+	REG_LDO3_ON_VSEL,
+	REG_LDO3_SLP_VSEL,
+	REG_LDO4_ON_VSEL,
+	REG_LDO4_SLP_VSEL,
+	REG_LDO5_ON_VSEL,
+	REG_LDO5_SLP_VSEL,
+	REG_LDO6_ON_VSEL,
+	REG_LDO6_SLP_VSEL,
+	REG_LDO7_ON_VSEL,
+	REG_LDO7_SLP_VSEL,
+	REG_LDO8_ON_VSEL,
+	REG_LDO8_SLP_VSEL,
+	REG_DEVCTRL,
+	REG_INT_STS1,
+	REG_INT_STS_MSK1,
+	REG_INT_STS2,
+	REG_INT_STS_MSK2,
+	REG_IO_POL,
+	REG_OTP_VDD_EN,
+	REG_H5V_EN,
+	REG_SLEEP_SET_OFF,
+	REG_BOOST_LDO9_ON_VSEL,
+	REG_BOOST_LDO9_SLP_VSEL,
+	REG_BOOST_CTRL,
 
 	/* Not sure what this does */
-	DCDC_ILMAX			= 0x90,
-
+	REG_DCDC_ILMAX			= 0x90,
+	REG_CHRG_COMP			= 0x9a,
+	REG_SUP_STS			= 0xa0,
+	REG_USB_CTRL,
+	REG1_CHRG_CTRL,
+	REG2_CHRG_CTRL,
+	REG3_CHRG_CTRL,
+	REG_BAT_CTRL,
+	REG_BAT_HTS_TS1,
+	REG_BAT_LTS_TS1,
+	REG_BAT_HTS_TS2,
+	REG_BAT_LTS_TS2,
+	REG_TS_CTRL,
+	REG_ADC_CTRL,
+	REG_ON_SOURCE,
+	REG_OFF_SOURCE,
+	REG_GGCON,
+	REG_GGSTS,
+	REG_FRAME_SMP_INTERV,
+	REG_AUTO_SLP_CUR_THR,
+	REG3_GASCNT_CAL,
+	REG2_GASCNT_CAL,
+	REG1_GASCNT_CAL,
+	REG0_GASCNT_CAL,
+	REG3_GASCNT,
+	REG2_GASCNT,
+	REG1_GASCNT,
+	REG0_GASCNT,
+	REGH_BAT_CUR_AVG,
+	REGL_BAT_CUR_AVG,
+	REGH_TS1_ADC,
+	REGL_TS1_ADC,
+	REGH_TS2_ADC,
+	REGL_TS2_ADC,
+	REGH_BAT_OCV,
+	REGL_BAT_OCV,
+	REGH_BAT_VOL,
+	REGL_BAT_VOL,
+	REGH_RELAX_ENTRY_THRES,
+	REGL_RELAX_ENTRY_THRES,
+	REGH_RELAX_EXIT_THRES,
+	REGL_RELAX_EXIT_THRES,
+	REGH_RELAX_VOL1,
+	REGL_RELAX_VOL1,
+	REGH_RELAX_VOL2,
+	REGL_RELAX_VOL2,
+	REGH_BAT_CUR_R_CALC,
+	REGL_BAT_CUR_R_CALC,
+	REGH_BAT_VOL_R_CALC,
+	REGL_BAT_VOL_R_CALC,
+	REGH_CAL_OFFSET,
+	REGL_CAL_OFFSET,
+	REG_NON_ACT_TIMER_CNT,
+	REGH_VCALIB0,
+	REGL_VCALIB0,
+	REGH_VCALIB1,
+	REGL_VCALIB1,
+	REGH_IOFFSET,
+	REGL_IOFFSET,
+	REG_SOC,
+	REG3_REMAIN_CAP,
+	REG2_REMAIN_CAP,
+	REG1_REMAIN_CAP,
+	REG0_REMAIN_CAP,
+	REG_UPDAT_LEVE,
+	REG3_NEW_FCC,
+	REG2_NEW_FCC,
+	REG1_NEW_FCC,
+	REG0_NEW_FCC,
+	REG_NON_ACT_TIMER_CNT_SAVE,
+	REG_OCV_VOL_VALID,
+	REG_REBOOT_CNT,
+	REG_POFFSET,
+	REG_MISC_MARK,
+	REG_HALT_CNT,
+	REGH_CALC_REST,
+	REGL_CALC_REST,
+	SAVE_DATA19,
 	RK808_NUM_OF_REGS,
 };