diff options
author | Vladimir Barinov <vladimir.barinov@cogentembedded.com> | 2015-07-20 17:49:59 (GMT) |
---|---|---|
committer | Nobuhiro Iwamatsu <iwamatsu@nigauri.org> | 2015-08-31 08:32:59 (GMT) |
commit | 21871138b7686b36dd8ae97cab5dc1e9c5c6e183 (patch) | |
tree | e44c863566f312a23394dfc10560e4192f7707bc /include | |
parent | b8f91e2c92b7a8e01234fe384186202a24238f92 (diff) | |
download | u-boot-21871138b7686b36dd8ae97cab5dc1e9c5c6e183.tar.xz |
arm: rmobile: Add Stout board support
Stout is an entry level development board based on R-Car H2 SoC (R8A7790)
This commit supports the following peripherals:
- SCIFA, I2C, Ethernet, QSPI, SDHI0/2, CPLD
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Diffstat (limited to 'include')
-rw-r--r-- | include/configs/stout.h | 112 |
1 files changed, 112 insertions, 0 deletions
diff --git a/include/configs/stout.h b/include/configs/stout.h new file mode 100644 index 0000000..87ea530 --- /dev/null +++ b/include/configs/stout.h @@ -0,0 +1,112 @@ +/* + * include/configs/stout.h + * This file is Stout board configuration. + * + * Copyright (C) 2015 Renesas Electronics Europe GmbH + * Copyright (C) 2015 Renesas Electronics Corporation + * Copyright (C) 2015 Cogent Embedded, Inc. + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef __STOUT_H +#define __STOUT_H + +#undef DEBUG +#define CONFIG_R8A7790 +#define CONFIG_RMOBILE_BOARD_STRING "Stout" + +#include "rcar-gen2-common.h" + +/* #define CONFIG_BOARD_LATE_INIT */ + +#if defined(CONFIG_RMOBILE_EXTRAM_BOOT) +#define CONFIG_SYS_TEXT_BASE 0xB0000000 +#else +#define CONFIG_SYS_TEXT_BASE 0xE8080000 +#endif + +/* STACK */ +#if defined(CONFIGF_RMOBILE_EXTRAM_BOOT) +#define CONFIG_SYS_INIT_SP_ADDR 0xB003FFFC +#else +#define CONFIG_SYS_INIT_SP_ADDR 0xE827FFFC +#endif +#define STACK_AREA_SIZE 0xC000 +#define LOW_LEVEL_MERAM_STACK \ + (CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4) + +/* MEMORY */ +#define RCAR_GEN2_SDRAM_BASE 0x40000000 +#define RCAR_GEN2_SDRAM_SIZE (1024u * 1024 * 1024) +#define RCAR_GEN2_UBOOT_SDRAM_SIZE (512 * 1024 * 1024) + +/* SCIF */ +#define CONFIG_SCIF_CONSOLE +#define CONFIG_SCIF_A + +/* SPI */ +#define CONFIG_SPI +#define CONFIG_SH_QSPI +#define CONFIG_SPI_FLASH_SPANSION +#define CONFIG_SPI_FLASH_QUAD +#define CONFIG_SYS_NO_FLASH + +/* SH Ether */ +#define CONFIG_SH_ETHER +#define CONFIG_SH_ETHER_USE_PORT 0 +#define CONFIG_SH_ETHER_PHY_ADDR 0x1 +#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII +#define CONFIG_SH_ETHER_ALIGNE_SIZE 64 +#define CONFIG_SH_ETHER_CACHE_WRITEBACK +#define CONFIG_SH_ETHER_CACHE_INVALIDATE +#define CONFIG_PHYLIB +#define CONFIG_PHY_MICREL +#define CONFIG_BITBANGMII +#define CONFIG_BITBANGMII_MULTI + +/* I2C */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_RCAR +#define CONFIG_SYS_RCAR_I2C0_SPEED 400000 +#define CONFIG_SYS_RCAR_I2C1_SPEED 400000 +#define CONFIG_SYS_RCAR_I2C2_SPEED 400000 +#define CONFIG_SYS_RCAR_I2C3_SPEED 400000 +#define CONFIF_SYS_RCAR_I2C_NUM_CONTROLLERS 4 + +#define CONFIG_SYS_I2C_POWERIC_ADDR 0x58 /* da9063 */ + +/* Board Clock */ +#define RMOBILE_XTAL_CLK 20000000u +#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK +#define CONFIG_SH_TMU_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2) /* EXT / 2 */ +#define CONFIG_PLL1_CLK_FREQ (CONFIG_SYS_CLK_FREQ * 156 / 2) +#define CONFIG_PLL1_DIV2_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 2) +#define CONFIG_MP_CLK_FREQ (CONFIG_PLL1_DIV2_CLK_FREQ / 15) +#define CONFIG_HP_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 12) + +#define CONFIG_SYS_TMU_CLK_DIV 4 + +/* USB */ +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_RMOBILE +#define CONFIG_USB_MAX_CONTROLLER_COUNT 3 +#define CONFIG_USB_STORAGE + +/* MMC */ +#define CONFIG_MMC +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC + +/* Module stop status bits */ +/* INTC-RT */ +#define CONFIG_SMSTP0_ENA 0x00400000 +/* MSIF, SCIFA0 */ +#define CONFIG_SMSTP2_ENA 0x00002010 +/* INTC-SYS, IRQC */ +#define CONFIG_SMSTP4_ENA 0x00000180 + +/* SDHI */ +#define CONFIG_SH_SDHI_FREQ 97500000 + +#endif /* __STOUT_H */ |