diff options
author | wdenk <wdenk> | 2003-10-14 19:43:55 (GMT) |
---|---|---|
committer | wdenk <wdenk> | 2003-10-14 19:43:55 (GMT) |
commit | 2d5b561e2bfdee8552a99b2cf93016cce2a74895 (patch) | |
tree | 33a47c8393624e338d0cc8914c773ab9613cb385 /include | |
parent | f72da3406bf6f1c1bce9aa03b07d070413a916af (diff) | |
download | u-boot-2d5b561e2bfdee8552a99b2cf93016cce2a74895.tar.xz |
* Make sure HUSH is initialized for running auto-update scripts
* Make 5200 reset command _really_ reset the board, without running
any other code after it
* Fix flash mapping and display on P3G4 board
* Patch by Kyle Harris, 15 Jul 2003:
- add support for Intel IXP425 CPU
- add support for IXDP425 eval board
Diffstat (limited to 'include')
-rw-r--r-- | include/asm-arm/arch-ixp/ixp425.h | 559 | ||||
-rw-r--r-- | include/configs/P3G4.h | 4 | ||||
-rw-r--r-- | include/configs/ixdp425.h | 171 |
3 files changed, 732 insertions, 2 deletions
diff --git a/include/asm-arm/arch-ixp/ixp425.h b/include/asm-arm/arch-ixp/ixp425.h new file mode 100644 index 0000000..b82b818 --- /dev/null +++ b/include/asm-arm/arch-ixp/ixp425.h @@ -0,0 +1,559 @@ +/* + * include/asm-arm/arch-ixp425/ixp425.h + * + * Register definitions for IXP425 + * + * Copyright (C) 2002 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _ASM_ARM_IXP425_H_ +#define _ASM_ARM_IXP425_H_ + +#define BIT(x) (1<<(x)) + +/* FIXME: Only this does work for u-boot... find out why... [RS] */ +#define UBOOT_REG_FIX 1 +#ifdef UBOOT_REG_FIX +# undef io_p2v +# undef __REG +# ifndef __ASSEMBLY__ +# define io_p2v(PhAdd) (PhAdd) +# define __REG(x) (*((volatile u32 *)io_p2v(x))) +# define __REG2(x,y) (*(volatile u32 *)((u32)&__REG(x) + (y))) +# else +# define __REG(x) (x) +# endif +#endif /* UBOOT_REG_FIX */ + +/* + * + * IXP425 Memory map: + * + * Phy Phy Size Map Size Virt Description + * ========================================================================= + * + * 0x00000000 0x10000000 SDRAM 1 + * + * 0x10000000 0x10000000 SDRAM 2 + * + * 0x20000000 0x10000000 SDRAM 3 + * + * 0x30000000 0x10000000 SDRAM 4 + * + * The above four are aliases to the same memory location (0x00000000) + * + * 0x48000000 0x4000000 PCI Memory + * + * 0x50000000 0x10000000 Not Mapped EXP BUS + * + * 0x6000000 0x00004000 0x4000 0xFFFEB000 QMgr + * + * 0xC0000000 0x100 0x1000 0xFFFDD000 PCI CFG + * + * 0xC4000000 0x100 0x1000 0xFFFDE000 EXP CFG + * + * 0xC8000000 0xC000 0xC000 0xFFFDF000 PERIPHERAL + * + * 0xCC000000 0x100 0x1000 Not Mapped SDRAM CFG + */ + +/* + * SDRAM + */ +#define IXP425_SDRAM_BASE (0x00000000) +#define IXP425_SDRAM_BASE_ALT (0x10000000) + + +/* + * PCI Configuration space + */ +#define IXP425_PCI_CFG_BASE_PHYS (0xC0000000) +#define IXP425_PCI_CFG_BASE_VIRT (0xFFFD0000) +#define IXP425_PCI_CFG_REGION_SIZE (0x00001000) + +/* + * Expansion BUS Configuration registers + */ +#define IXP425_EXP_CFG_BASE_PHYS (0xC4000000) +#define IXP425_EXP_CFG_BASE_VIRT (0xFFFD1000) +#define IXP425_EXP_CFG_REGION_SIZE (0x00001000) + +/* + * Peripheral space + */ +#define IXP425_PERIPHERAL_BASE_PHYS (0xC8000000) +#define IXP425_PERIPHERAL_BASE_VIRT (0xFFFD2000) +#define IXP425_PERIPHERAL_REGION_SIZE (0x0000C000) + +/* + * SDRAM configuration registers + */ +#define IXP425_SDRAM_CFG_BASE_PHYS (0xCC000000) + +/* + * Q Manager space .. not static mapped + */ +#define IXP425_QMGR_BASE_PHYS (0x60000000) +#define IXP425_QMGR_BASE_VIRT (0xFFFDE000) +#define IXP425_QMGR_REGION_SIZE (0x00004000) + +/* + * Expansion BUS + * + * Expansion Bus 'lives' at either base1 or base 2 depending on the value of + * Exp Bus config registers: + * + * Setting bit 31 of IXP425_EXP_CFG0 puts SDRAM at zero, + * and The expansion bus to IXP425_EXP_BUS_BASE2 + */ +#define IXP425_EXP_BUS_BASE1_PHYS (0x00000000) +#define IXP425_EXP_BUS_BASE2_PHYS (0x50000000) +#define IXP425_EXP_BUS_BASE2_VIRT (0xF0000000) + +#define IXP425_EXP_BUS_BASE_PHYS IXP425_EXP_BUS_BASE2_PHYS +#define IXP425_EXP_BUS_BASE_VIRT IXP425_EXP_BUS_BASE2_VIRT + +#define IXP425_EXP_BUS_REGION_SIZE (0x08000000) +#define IXP425_EXP_BUS_CSX_REGION_SIZE (0x01000000) + +#define IXP425_EXP_BUS_CS0_BASE_PHYS (IXP425_EXP_BUS_BASE2_PHYS + 0x00000000) +#define IXP425_EXP_BUS_CS1_BASE_PHYS (IXP425_EXP_BUS_BASE2_PHYS + 0x01000000) +#define IXP425_EXP_BUS_CS2_BASE_PHYS (IXP425_EXP_BUS_BASE2_PHYS + 0x02000000) +#define IXP425_EXP_BUS_CS3_BASE_PHYS (IXP425_EXP_BUS_BASE2_PHYS + 0x03000000) +#define IXP425_EXP_BUS_CS4_BASE_PHYS (IXP425_EXP_BUS_BASE2_PHYS + 0x04000000) +#define IXP425_EXP_BUS_CS5_BASE_PHYS (IXP425_EXP_BUS_BASE2_PHYS + 0x05000000) +#define IXP425_EXP_BUS_CS6_BASE_PHYS (IXP425_EXP_BUS_BASE2_PHYS + 0x06000000) +#define IXP425_EXP_BUS_CS7_BASE_PHYS (IXP425_EXP_BUS_BASE2_PHYS + 0x07000000) + +#define IXP425_EXP_BUS_CS0_BASE_VIRT (IXP425_EXP_BUS_BASE2_VIRT + 0x00000000) +#define IXP425_EXP_BUS_CS1_BASE_VIRT (IXP425_EXP_BUS_BASE2_VIRT + 0x01000000) +#define IXP425_EXP_BUS_CS2_BASE_VIRT (IXP425_EXP_BUS_BASE2_VIRT + 0x02000000) +#define IXP425_EXP_BUS_CS3_BASE_VIRT (IXP425_EXP_BUS_BASE2_VIRT + 0x03000000) +#define IXP425_EXP_BUS_CS4_BASE_VIRT (IXP425_EXP_BUS_BASE2_VIRT + 0x04000000) +#define IXP425_EXP_BUS_CS5_BASE_VIRT (IXP425_EXP_BUS_BASE2_VIRT + 0x05000000) +#define IXP425_EXP_BUS_CS6_BASE_VIRT (IXP425_EXP_BUS_BASE2_VIRT + 0x06000000) +#define IXP425_EXP_BUS_CS7_BASE_VIRT (IXP425_EXP_BUS_BASE2_VIRT + 0x07000000) + +#define IXP425_FLASH_WRITABLE (0x2) +#define IXP425_FLASH_DEFAULT (0xbcd23c40) +#define IXP425_FLASH_WRITE (0xbcd23c42) + + +#define IXP425_EXP_CS0_OFFSET 0x00 +#define IXP425_EXP_CS1_OFFSET 0x04 +#define IXP425_EXP_CS2_OFFSET 0x08 +#define IXP425_EXP_CS3_OFFSET 0x0C +#define IXP425_EXP_CS4_OFFSET 0x10 +#define IXP425_EXP_CS5_OFFSET 0x14 +#define IXP425_EXP_CS6_OFFSET 0x18 +#define IXP425_EXP_CS7_OFFSET 0x1C +#define IXP425_EXP_CFG0_OFFSET 0x20 +#define IXP425_EXP_CFG1_OFFSET 0x24 +#define IXP425_EXP_CFG2_OFFSET 0x28 +#define IXP425_EXP_CFG3_OFFSET 0x2C + +/* + * Expansion Bus Controller registers. + */ +#ifndef __ASSEMBLY__ +#define IXP425_EXP_REG(x) ((volatile u32 *)(IXP425_EXP_CFG_BASE_VIRT+(x))) +#else +#define IXP425_EXP_REG(x) (IXP425_EXP_CFG_BASE_PHYS+(x)) +#endif + +#define IXP425_EXP_CS0 IXP425_EXP_REG(IXP425_EXP_CS0_OFFSET) +#define IXP425_EXP_CS1 IXP425_EXP_REG(IXP425_EXP_CS1_OFFSET) +#define IXP425_EXP_CS2 IXP425_EXP_REG(IXP425_EXP_CS2_OFFSET) +#define IXP425_EXP_CS3 IXP425_EXP_REG(IXP425_EXP_CS3_OFFSET) +#define IXP425_EXP_CS4 IXP425_EXP_REG(IXP425_EXP_CS4_OFFSET) +#define IXP425_EXP_CS5 IXP425_EXP_REG(IXP425_EXP_CS5_OFFSET) +#define IXP425_EXP_CS6 IXP425_EXP_REG(IXP425_EXP_CS6_OFFSET) +#define IXP425_EXP_CS7 IXP425_EXP_REG(IXP425_EXP_CS7_OFFSET) + +#define IXP425_EXP_CFG0 IXP425_EXP_REG(IXP425_EXP_CFG0_OFFSET) +#define IXP425_EXP_CFG1 IXP425_EXP_REG(IXP425_EXP_CFG1_OFFSET) +#define IXP425_EXP_CFG2 IXP425_EXP_REG(IXP425_EXP_CFG2_OFFSET) +#define IXP425_EXP_CFG3 IXP425_EXP_REG(IXP425_EXP_CFG3_OFFSET) + +/* + * SDRAM Controller registers. + */ +#define IXP425_SDR_CONFIG_OFFSET 0x00 +#define IXP425_SDR_REFRESH_OFFSET 0x04 +#define IXP425_SDR_IR_OFFSET 0x08 + +#define IXP425_SDRAM_REG(x) (IXP425_SDRAM_CFG_BASE_PHYS+(x)) + +#define IXP425_SDR_CONFIG IXP425_SDRAM_REG(IXP425_SDR_CONFIG_OFFSET) +#define IXP425_SDR_REFRESH IXP425_SDRAM_REG(IXP425_SDR_REFRESH_OFFSET) +#define IXP425_SDR_IR IXP425_SDRAM_REG(IXP425_SDR_IR_OFFSET) + +/* + * UART registers + */ +#define IXP425_UART1 0 +#define IXP425_UART2 0x1000 + +#define IXP425_UART_RBR_OFFSET 0x00 +#define IXP425_UART_THR_OFFSET 0x00 +#define IXP425_UART_DLL_OFFSET 0x00 +#define IXP425_UART_IER_OFFSET 0x04 +#define IXP425_UART_DLH_OFFSET 0x04 +#define IXP425_UART_IIR_OFFSET 0x08 +#define IXP425_UART_FCR_OFFSET 0x00 +#define IXP425_UART_LCR_OFFSET 0x0c +#define IXP425_UART_MCR_OFFSET 0x10 +#define IXP425_UART_LSR_OFFSET 0x14 +#define IXP425_UART_MSR_OFFSET 0x18 +#define IXP425_UART_SPR_OFFSET 0x1c +#define IXP425_UART_ISR_OFFSET 0x20 + +#define IXP425_UART_CFG_BASE_PHYS (0xc8000000) + +#define RBR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_RBR_OFFSET) +#define THR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_THR_OFFSET) +#define DLL(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_DLL_OFFSET) +#define IER(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_IER_OFFSET) +#define DLH(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_DLH_OFFSET) +#define IIR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_IIR_OFFSET) +#define FCR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_FCR_OFFSET) +#define LCR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_LCR_OFFSET) +#define MCR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_MCR_OFFSET) +#define LSR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_LSR_OFFSET) +#define MSR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_MSR_OFFSET) +#define SPR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_SPR_OFFSET) +#define ISR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_ISR_OFFSET) + +#define IER_DMAE (1 << 7) /* DMA Requests Enable */ +#define IER_UUE (1 << 6) /* UART Unit Enable */ +#define IER_NRZE (1 << 5) /* NRZ coding Enable */ +#define IER_RTIOE (1 << 4) /* Receiver Time Out Interrupt Enable */ +#define IER_MIE (1 << 3) /* Modem Interrupt Enable */ +#define IER_RLSE (1 << 2) /* Receiver Line Status Interrupt Enable */ +#define IER_TIE (1 << 1) /* Transmit Data request Interrupt Enable */ +#define IER_RAVIE (1 << 0) /* Receiver Data Available Interrupt Enable */ + +#define IIR_FIFOES1 (1 << 7) /* FIFO Mode Enable Status */ +#define IIR_FIFOES0 (1 << 6) /* FIFO Mode Enable Status */ +#define IIR_TOD (1 << 3) /* Time Out Detected */ +#define IIR_IID2 (1 << 2) /* Interrupt Source Encoded */ +#define IIR_IID1 (1 << 1) /* Interrupt Source Encoded */ +#define IIR_IP (1 << 0) /* Interrupt Pending (active low) */ + +#define FCR_ITL2 (1 << 7) /* Interrupt Trigger Level */ +#define FCR_ITL1 (1 << 6) /* Interrupt Trigger Level */ +#define FCR_RESETTF (1 << 2) /* Reset Transmitter FIFO */ +#define FCR_RESETRF (1 << 1) /* Reset Receiver FIFO */ +#define FCR_TRFIFOE (1 << 0) /* Transmit and Receive FIFO Enable */ +#define FCR_ITL_1 (0) +#define FCR_ITL_8 (FCR_ITL1) +#define FCR_ITL_16 (FCR_ITL2) +#define FCR_ITL_32 (FCR_ITL2|FCR_ITL1) + +#define LCR_DLAB (1 << 7) /* Divisor Latch Access Bit */ +#define LCR_SB (1 << 6) /* Set Break */ +#define LCR_STKYP (1 << 5) /* Sticky Parity */ +#define LCR_EPS (1 << 4) /* Even Parity Select */ +#define LCR_PEN (1 << 3) /* Parity Enable */ +#define LCR_STB (1 << 2) /* Stop Bit */ +#define LCR_WLS1 (1 << 1) /* Word Length Select */ +#define LCR_WLS0 (1 << 0) /* Word Length Select */ + +#define LSR_FIFOE (1 << 7) /* FIFO Error Status */ +#define LSR_TEMT (1 << 6) /* Transmitter Empty */ +#define LSR_TDRQ (1 << 5) /* Transmit Data Request */ +#define LSR_BI (1 << 4) /* Break Interrupt */ +#define LSR_FE (1 << 3) /* Framing Error */ +#define LSR_PE (1 << 2) /* Parity Error */ +#define LSR_OE (1 << 1) /* Overrun Error */ +#define LSR_DR (1 << 0) /* Data Ready */ + +#define MCR_LOOP (1 << 4) */ +#define MCR_OUT2 (1 << 3) /* force MSR_DCD in loopback mode */ +#define MCR_OUT1 (1 << 2) /* force MSR_RI in loopback mode */ +#define MCR_RTS (1 << 1) /* Request to Send */ +#define MCR_DTR (1 << 0) /* Data Terminal Ready */ + +#define MSR_DCD (1 << 7) /* Data Carrier Detect */ +#define MSR_RI (1 << 6) /* Ring Indicator */ +#define MSR_DSR (1 << 5) /* Data Set Ready */ +#define MSR_CTS (1 << 4) /* Clear To Send */ +#define MSR_DDCD (1 << 3) /* Delta Data Carrier Detect */ +#define MSR_TERI (1 << 2) /* Trailing Edge Ring Indicator */ +#define MSR_DDSR (1 << 1) /* Delta Data Set Ready */ +#define MSR_DCTS (1 << 0) /* Delta Clear To Send */ + +#define IXP425_CONSOLE_UART_BASE_VIRT IXP425_UART1_BASE_VIRT +#define IXP425_CONSOLE_UART_BASE_PHYS IXP425_UART1_BASE_PHYS +/* + * Peripheral Space Registers + */ +#define IXP425_UART1_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x0000) +#define IXP425_UART2_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x1000) +#define IXP425_PMU_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x2000) +#define IXP425_INTC_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x3000) +#define IXP425_GPIO_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x4000) +#define IXP425_TIMER_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x5000) +#define IXP425_NPEA_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x6000) +#define IXP425_NPEB_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x7000) +#define IXP425_NPEC_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x8000) +#define IXP425_EthA_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x9000) +#define IXP425_EthB_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0xA000) +#define IXP425_USB_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0xB000) + +#define IXP425_UART1_BASE_VIRT (IXP425_PERIPHERAL_BASE_VIRT + 0x0000) +#define IXP425_UART2_BASE_VIRT (IXP425_PERIPHERAL_BASE_VIRT + 0x1000) +#define IXP425_PMU_BASE_VIRT (IXP425_PERIPHERAL_BASE_VIRT + 0x2000) +#define IXP425_INTC_BASE_VIRT (IXP425_PERIPHERAL_BASE_VIRT + 0x3000) +#define IXP425_GPIO_BASE_VIRT (IXP425_PERIPHERAL_BASE_VIRT + 0x4000) +#define IXP425_TIMER_BASE_VIRT (IXP425_PERIPHERAL_BASE_VIRT + 0x5000) +#define IXP425_NPEA_BASE_VIRT (IXP425_PERIPHERAL_BASE_VIRT + 0x6000) +#define IXP425_NPEB_BASE_VIRT (IXP425_PERIPHERAL_BASE_VIRT + 0x7000) +#define IXP425_NPEC_BASE_VIRT (IXP425_PERIPHERAL_BASE_VIRT + 0x8000) +#define IXP425_EthA_BASE_VIRT (IXP425_PERIPHERAL_BASE_VIRT + 0x9000) +#define IXP425_EthB_BASE_VIRT (IXP425_PERIPHERAL_BASE_VIRT + 0xA000) +#define IXP425_USB_BASE_VIRT (IXP425_PERIPHERAL_BASE_VIRT + 0xB000) + + +/* + * UART Register Definitions , Offsets only as there are 2 UARTS. + * IXP425_UART1_BASE , IXP425_UART2_BASE. + */ + +#undef UART_NO_RX_INTERRUPT + +#define IXP425_UART_XTAL 14745600 + +/* + * Constants to make it easy to access Interrupt Controller registers + */ +#define IXP425_ICPR_OFFSET 0x00 /* Interrupt Status */ +#define IXP425_ICMR_OFFSET 0x04 /* Interrupt Enable */ +#define IXP425_ICLR_OFFSET 0x08 /* Interrupt IRQ/FIQ Select */ +#define IXP425_ICIP_OFFSET 0x0C /* IRQ Status */ +#define IXP425_ICFP_OFFSET 0x10 /* FIQ Status */ +#define IXP425_ICHR_OFFSET 0x14 /* Interrupt Priority */ +#define IXP425_ICIH_OFFSET 0x18 /* IRQ Highest Pri Int */ +#define IXP425_ICFH_OFFSET 0x1C /* FIQ Highest Pri Int */ + +/* + * Interrupt Controller Register Definitions. + */ +#ifndef __ASSEMBLY__ +#define IXP425_INTC_REG(x) ((volatile u32 *)(IXP425_INTC_BASE_VIRT+(x))) +#else +#define IXP425_INTC_REG(x) (IXP425_INTC_BASE_PHYS+(x)) +#endif + +#define IXP425_ICPR IXP425_INTC_REG(IXP425_ICPR_OFFSET) +#define IXP425_ICMR IXP425_INTC_REG(IXP425_ICMR_OFFSET) +#define IXP425_ICLR IXP425_INTC_REG(IXP425_ICLR_OFFSET) +#define IXP425_ICIP IXP425_INTC_REG(IXP425_ICIP_OFFSET) +#define IXP425_ICFP IXP425_INTC_REG(IXP425_ICFP_OFFSET) +#define IXP425_ICHR IXP425_INTC_REG(IXP425_ICHR_OFFSET) +#define IXP425_ICIH IXP425_INTC_REG(IXP425_ICIH_OFFSET) +#define IXP425_ICFH IXP425_INTC_REG(IXP425_ICFH_OFFSET) + +/* + * Constants to make it easy to access GPIO registers + */ +#define IXP425_GPIO_GPOUTR_OFFSET 0x00 +#define IXP425_GPIO_GPOER_OFFSET 0x04 +#define IXP425_GPIO_GPINR_OFFSET 0x08 +#define IXP425_GPIO_GPISR_OFFSET 0x0C +#define IXP425_GPIO_GPIT1R_OFFSET 0x10 +#define IXP425_GPIO_GPIT2R_OFFSET 0x14 +#define IXP425_GPIO_GPCLKR_OFFSET 0x18 +#define IXP425_GPIO_GPDBSELR_OFFSET 0x1C + +/* + * GPIO Register Definitions. + * [Only perform 32bit reads/writes] + */ +#define IXP425_GPIO_REG(x) ((volatile u32 *)(IXP425_GPIO_BASE_VIRT+(x))) + +#define IXP425_GPIO_GPOUTR IXP425_GPIO_REG(IXP425_GPIO_GPOUTR_OFFSET) +#define IXP425_GPIO_GPOER IXP425_GPIO_REG(IXP425_GPIO_GPOER_OFFSET) +#define IXP425_GPIO_GPINR IXP425_GPIO_REG(IXP425_GPIO_GPINR_OFFSET) +#define IXP425_GPIO_GPISR IXP425_GPIO_REG(IXP425_GPIO_GPISR_OFFSET) +#define IXP425_GPIO_GPIT1R IXP425_GPIO_REG(IXP425_GPIO_GPIT1R_OFFSET) +#define IXP425_GPIO_GPIT2R IXP425_GPIO_REG(IXP425_GPIO_GPIT2R_OFFSET) +#define IXP425_GPIO_GPCLKR IXP425_GPIO_REG(IXP425_GPIO_GPCLKR_OFFSET) +#define IXP425_GPIO_GPDBSELR IXP425_GPIO_REG(IXP425_GPIO_GPDBSELR_OFFSET) + +/* + * Constants to make it easy to access Timer Control/Status registers + */ +#define IXP425_OSTS_OFFSET 0x00 /* Continious TimeStamp */ +#define IXP425_OST1_OFFSET 0x04 /* Timer 1 Timestamp */ +#define IXP425_OSRT1_OFFSET 0x08 /* Timer 1 Reload */ +#define IXP425_OST2_OFFSET 0x0C /* Timer 2 Timestamp */ +#define IXP425_OSRT2_OFFSET 0x10 /* Timer 2 Reload */ +#define IXP425_OSWT_OFFSET 0x14 /* Watchdog Timer */ +#define IXP425_OSWE_OFFSET 0x18 /* Watchdog Enable */ +#define IXP425_OSWK_OFFSET 0x1C /* Watchdog Key */ +#define IXP425_OSST_OFFSET 0x20 /* Timer Status */ + +/* + * Operating System Timer Register Definitions. + */ + +#ifndef __ASSEMBLY__ +#define IXP425_TIMER_REG(x) ((volatile u32 *)(IXP425_TIMER_BASE_PHYS+(x))) +#else +#define IXP425_TIMER_REG(x) (IXP425_TIMER_BASE_PHYS+(x)) +#endif + +#define IXP425_OSTS IXP425_TIMER_REG(IXP425_OSTS_OFFSET) +#define IXP425_OST1 IXP425_TIMER_REG(IXP425_OST1_OFFSET) +#define IXP425_OSRT1 IXP425_TIMER_REG(IXP425_OSRT1_OFFSET) +#define IXP425_OST2 IXP425_TIMER_REG(IXP425_OST2_OFFSET) +#define IXP425_OSRT2 IXP425_TIMER_REG(IXP425_OSRT2_OFFSET) +#define IXP425_OSWT IXP425_TIMER_REG(IXP425_OSWT_OFFSET) +#define IXP425_OSWE IXP425_TIMER_REG(IXP425_OSWE_OFFSET) +#define IXP425_OSWK IXP425_TIMER_REG(IXP425_OSWK_OFFSET) +#define IXP425_OSST IXP425_TIMER_REG(IXP425_OSST_OFFSET) + +/* + * Timer register values and bit definitions + */ +#define IXP425_OST_ENABLE BIT(0) +#define IXP425_OST_ONE_SHOT BIT(1) +/* Low order bits of reload value ignored */ +#define IXP425_OST_RELOAD_MASK (0x3) +#define IXP425_OST_DISABLED (0x0) +#define IXP425_OSST_TIMER_1_PEND BIT(0) +#define IXP425_OSST_TIMER_2_PEND BIT(1) +#define IXP425_OSST_TIMER_TS_PEND BIT(2) +#define IXP425_OSST_TIMER_WDOG_PEND BIT(3) +#define IXP425_OSST_TIMER_WARM_RESET BIT(4) + +/* + * Constants to make it easy to access PCI Control/Status registers + */ +#define PCI_NP_AD_OFFSET 0x00 +#define PCI_NP_CBE_OFFSET 0x04 +#define PCI_NP_WDATA_OFFSET 0x08 +#define PCI_NP_RDATA_OFFSET 0x0c +#define PCI_CRP_AD_CBE_OFFSET 0x10 +#define PCI_CRP_WDATA_OFFSET 0x14 +#define PCI_CRP_RDATA_OFFSET 0x18 +#define PCI_CSR_OFFSET 0x1c +#define PCI_ISR_OFFSET 0x20 +#define PCI_INTEN_OFFSET 0x24 +#define PCI_DMACTRL_OFFSET 0x28 +#define PCI_AHBMEMBASE_OFFSET 0x2c +#define PCI_AHBIOBASE_OFFSET 0x30 +#define PCI_PCIMEMBASE_OFFSET 0x34 +#define PCI_AHBDOORBELL_OFFSET 0x38 +#define PCI_PCIDOORBELL_OFFSET 0x3C +#define PCI_ATPDMA0_AHBADDR_OFFSET 0x40 +#define PCI_ATPDMA0_PCIADDR_OFFSET 0x44 +#define PCI_ATPDMA0_LENADDR_OFFSET 0x48 +#define PCI_ATPDMA1_AHBADDR_OFFSET 0x4C +#define PCI_ATPDMA1_PCIADDR_OFFSET 0x50 +#define PCI_ATPDMA1_LENADDR_OFFSET 0x54 + +/* + * PCI Control/Status Registers + */ +#define IXP425_PCI_CSR(x) ((volatile u32 *)(IXP425_PCI_CFG_BASE_VIRT+(x))) + +#define PCI_NP_AD IXP425_PCI_CSR(PCI_NP_AD_OFFSET) +#define PCI_NP_CBE IXP425_PCI_CSR(PCI_NP_CBE_OFFSET) +#define PCI_NP_WDATA IXP425_PCI_CSR(PCI_NP_WDATA_OFFSET) +#define PCI_NP_RDATA IXP425_PCI_CSR(PCI_NP_RDATA_OFFSET) +#define PCI_CRP_AD_CBE IXP425_PCI_CSR(PCI_CRP_AD_CBE_OFFSET) +#define PCI_CRP_WDATA IXP425_PCI_CSR(PCI_CRP_WDATA_OFFSET) +#define PCI_CRP_RDATA IXP425_PCI_CSR(PCI_CRP_RDATA_OFFSET) +#define PCI_CSR IXP425_PCI_CSR(PCI_CSR_OFFSET) +#define PCI_ISR IXP425_PCI_CSR(PCI_ISR_OFFSET) +#define PCI_INTEN IXP425_PCI_CSR(PCI_INTEN_OFFSET) +#define PCI_DMACTRL IXP425_PCI_CSR(PCI_DMACTRL_OFFSET) +#define PCI_AHBMEMBASE IXP425_PCI_CSR(PCI_AHBMEMBASE_OFFSET) +#define PCI_AHBIOBASE IXP425_PCI_CSR(PCI_AHBIOBASE_OFFSET) +#define PCI_PCIMEMBASE IXP425_PCI_CSR(PCI_PCIMEMBASE_OFFSET) +#define PCI_AHBDOORBELL IXP425_PCI_CSR(PCI_AHBDOORBELL_OFFSET) +#define PCI_PCIDOORBELL IXP425_PCI_CSR(PCI_PCIDOORBELL_OFFSET) +#define PCI_ATPDMA0_AHBADDR IXP425_PCI_CSR(PCI_ATPDMA0_AHBADDR_OFFSET) +#define PCI_ATPDMA0_PCIADDR IXP425_PCI_CSR(PCI_ATPDMA0_PCIADDR_OFFSET) +#define PCI_ATPDMA0_LENADDR IXP425_PCI_CSR(PCI_ATPDMA0_LENADDR_OFFSET) +#define PCI_ATPDMA1_AHBADDR IXP425_PCI_CSR(PCI_ATPDMA1_AHBADDR_OFFSET) +#define PCI_ATPDMA1_PCIADDR IXP425_PCI_CSR(PCI_ATPDMA1_PCIADDR_OFFSET) +#define PCI_ATPDMA1_LENADDR IXP425_PCI_CSR(PCI_ATPDMA1_LENADDR_OFFSET) + +/* + * PCI register values and bit definitions + */ + +/* CSR bit definitions */ +#define PCI_CSR_HOST BIT(0) +#define PCI_CSR_ARBEN BIT(1) +#define PCI_CSR_ADS BIT(2) +#define PCI_CSR_PDS BIT(3) +#define PCI_CSR_ABE BIT(4) +#define PCI_CSR_DBT BIT(5) +#define PCI_CSR_ASE BIT(8) +#define PCI_CSR_IC BIT(15) + +/* ISR (Interrupt status) Register bit definitions */ +#define PCI_ISR_PSE BIT(0) +#define PCI_ISR_PFE BIT(1) +#define PCI_ISR_PPE BIT(2) +#define PCI_ISR_AHBE BIT(3) +#define PCI_ISR_APDC BIT(4) +#define PCI_ISR_PADC BIT(5) +#define PCI_ISR_ADB BIT(6) +#define PCI_ISR_PDB BIT(7) + +/* INTEN (Interrupt Enable) Register bit definitions */ +#define PCI_INTEN_PSE BIT(0) +#define PCI_INTEN_PFE BIT(1) +#define PCI_INTEN_PPE BIT(2) +#define PCI_INTEN_AHBE BIT(3) +#define PCI_INTEN_APDC BIT(4) +#define PCI_INTEN_PADC BIT(5) +#define PCI_INTEN_ADB BIT(6) +#define PCI_INTEN_PDB BIT(7) + +/* + * Shift value for byte enable on NP cmd/byte enable register + */ +#define IXP425_PCI_NP_CBE_BESL 4 + +/* + * PCI commands supported by NP access unit + */ +#define NP_CMD_IOREAD 0x2 +#define NP_CMD_IOWRITE 0x3 +#define NP_CMD_CONFIGREAD 0xa +#define NP_CMD_CONFIGWRITE 0xb +#define NP_CMD_MEMREAD 0x6 +#define NP_CMD_MEMWRITE 0x7 + +#if 0 +#ifndef __ASSEMBLY__ +extern int ixp425_pci_read(u32 addr, u32 cmd, u32* data); +extern int ixp425_pci_write(u32 addr, u32 cmd, u32 data); +extern void ixp425_pci_init(void *); +#endif +#endif + +/* + * Constants for CRP access into local config space + */ +#define CRP_AD_CBE_BESL 20 +#define CRP_AD_CBE_WRITE BIT(16) + +/* + * Clock Speed Definitions. + */ +#define IXP425_PERIPHERAL_BUS_CLOCK (66) /* 66Mhzi APB BUS */ + + +#endif diff --git a/include/configs/P3G4.h b/include/configs/P3G4.h index 7712384..b6ebc5f 100644 --- a/include/configs/P3G4.h +++ b/include/configs/P3G4.h @@ -154,7 +154,7 @@ * Please note that CFG_SDRAM_BASE _must_ start at 0 */ #define CFG_SDRAM_BASE 0x00000000 -#define CFG_FLASH_BASE 0xff800000 +#define CFG_FLASH_BASE 0xff000000 #define CFG_RESET_ADDRESS 0xfff00100 #define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ #define CFG_MONITOR_BASE TEXT_BASE @@ -348,7 +348,7 @@ #define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ #define CFG_MAX_FLASH_SECT 67 /* max number of sectors on one chip */ -#define CFG_EXTRA_FLASH_DEVICE DEVICE0 /* extra flash at device 0 */ +#define CFG_EXTRA_FLASH_DEVICE BOOT_DEVICE #define CFG_EXTRA_FLASH_WIDTH 2 /* 16 bit */ #define CFG_BOOT_FLASH_WIDTH 2 /* 16 bit */ diff --git a/include/configs/ixdp425.h b/include/configs/ixdp425.h new file mode 100644 index 0000000..3d814d0 --- /dev/null +++ b/include/configs/ixdp425.h @@ -0,0 +1,171 @@ +/* + * (C) Copyright 2003 + * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net + * + * Configuation settings for the IXDP425 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_IXP425 1 /* This is an IXP425 CPU */ +#define CONFIG_IXDP425 1 /* on an IXDP425 Board */ + +/*************************************************************** + * U-boot generic defines start here. + ***************************************************************/ + +/* + * If we are developing, we might want to start armboot from ram + * so we MUST NOT initialize critical regs like mem-timing ... + */ +#define CONFIG_INIT_CRITICAL /* undef for developing */ + +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL & ~CFG_CMD_NET) + +/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +/* These are u-boot generic parameters */ +#include <cmd_confdefs.h> + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_ETHADDR 08:00:3e:26:0a:5b +#define CONFIG_NETMASK 255.255.0.0 +#define CONFIG_IPADDR 192.168.0.21 +#define CONFIG_SERVERIP 192.168.0.250 +#define CONFIG_BOOTCOMMAND "bootm 50040000" +#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200" +#define CONFIG_CMDLINE_TAG + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x00400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x00800000 /* 4 ... 8 MB in DRAM */ + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR 0x00010000 /* default load address */ + +#define CFG_HZ 3333333 /* spec says 66.666 MHz, but it appears to be 33 */ + /* valid baudrates */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/*************************************************************** + * Platform/Board specific defines start here. + ***************************************************************/ + +/* + * Hardware drivers + */ + + +/* + * select serial console configuration + */ +#define CFG_IXP425_CONSOLE IXP425_UART1 /* we use UART1 for console */ + +/* + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 2 banks of DRAM */ +#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x01000000 /* 16 MB */ + +#define PHYS_FLASH_1 0x50000000 /* Flash Bank #1 */ +#define PHYS_FLASH_SIZE 0x00800000 /* 8 MB */ +#define PHYS_FLASH_BANK_SIZE 0x00800000 /* 8 MB Banks */ +#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 128 KB sectors (x1) */ + +#define CFG_DRAM_BASE 0x00000000 +#define CFG_DRAM_SIZE 0x01000000 + +#define CFG_FLASH_BASE PHYS_FLASH_1 + +/* + * Expansion bus settings + */ +#define CFG_EXP_CS0 0xbcd23c42 + +/* + * SDRAM settings + */ +#define CFG_SDR_CONFIG 0xd +#define CFG_SDRAM_REFRESH_CNT 0x81a + +/* + * GPIO settings + */ + +/* + * FLASH and environment organization + */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ + +/* timeout values are in ticks */ +#define CFG_FLASH_ERASE_TOUT (25*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (25*CFG_HZ) /* Timeout for Flash Write */ + +/* FIXME */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x20000) /* Addr of Environment Sector */ +#define CFG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */ + +#endif /* __CONFIG_H */ |