diff options
| author | Christian Gmeiner <christian.gmeiner@gmail.com> | 2014-11-10 13:35:48 (GMT) |
|---|---|---|
| committer | Stefano Babic <sbabic@denx.de> | 2014-11-13 15:22:26 (GMT) |
| commit | 39c7d5a222c50b6bb0618aa07d9951e730e6ff4b (patch) | |
| tree | 422f8030ef1558eefc32c92f9e1b36ed4fec4d3a /include | |
| parent | f4a7bf5a3792bdf238f376f7fa70a030c2fd8d92 (diff) | |
| download | u-boot-39c7d5a222c50b6bb0618aa07d9951e730e6ff4b.tar.xz | |
ot1200: add support for EHCI
U-Boot 2014.10-17457-g0b23780-dirty (Nov 10 2014 - 11:41:04)
CPU: Freescale i.MX6D rev1.2 at 792 MHz
Reset cause: WDOG
Board: ot1200
I2C: ready
DRAM: 1 GiB
MMC: FSL_SDHC: 0, FSL_SDHC: 1
SF: Detected M25P16 with page size 256 Bytes, erase size 64 KiB, total 2 MiB
In: serial
Out: serial
Err: serial
Net: using phy at 0
FEC [PRIME]
Hit any key to stop autoboot: 0
=> usb start
(Re)start USB...
USB0: Port not available.
USB1: USB EHCI 1.00
scanning bus 1 for devices... 4 USB Device(s) found
=> usb tree
USB device tree:
1 Hub (480 Mb/s, 0mA)
| u-boot EHCI Host Controller
|
+-2 Hub (480 Mb/s, 2mA)
|
+-3 Mass Storage (480 Mb/s, 80mA)
| USBest Technology USB Mass Storage Device 0000000000028B
|
+-4 Vendor specific (480 Mb/s, 2mA)
=>
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/ot1200.h | 7 |
1 files changed, 7 insertions, 0 deletions
diff --git a/include/configs/ot1200.h b/include/configs/ot1200.h index d7696bd..9512b1e 100644 --- a/include/configs/ot1200.h +++ b/include/configs/ot1200.h @@ -83,6 +83,13 @@ #define CONFIG_GENERIC_MMC #define CONFIG_BOUNCE_BUFFER +/* USB Configs */ +#define CONFIG_CMD_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_MX6 +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 + #ifdef CONFIG_MX6Q #define CONFIG_CMD_SATA #endif |