diff options
author | Matthew Fettke <[matthew.fettke@gmail.com]> | 2008-01-24 20:02:32 (GMT) |
---|---|---|
committer | John Rigby <jrigby@freescale.com> | 2008-03-31 21:10:11 (GMT) |
commit | 545c8e0a7cd3ca9d3846668f69b0d201250abea8 (patch) | |
tree | 681ee5e92ba0e5b9af6df7310e07bcf4e8eb6c79 /include | |
parent | f71d9d91a2cd9c30b2b6369f15c1a46c11537c2b (diff) | |
download | u-boot-545c8e0a7cd3ca9d3846668f69b0d201250abea8.tar.xz |
ColdFire: Added M5275EVB support.
Signed-off-by: Matthew Fettke <mfettke@videon-central.com>
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Acked-by: John Rigby <jrigby@freescale.com>
Diffstat (limited to 'include')
-rw-r--r-- | include/configs/M5275EVB.h | 223 |
1 files changed, 223 insertions, 0 deletions
diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h new file mode 100644 index 0000000..599f8dc --- /dev/null +++ b/include/configs/M5275EVB.h @@ -0,0 +1,223 @@ +/* + * Configuation settings for the Motorola MC5275EVB board. + * + * By Arthur Shipkowski <art@videon-central.com> + * Copyright (C) 2005 Videon Central, Inc. + * + * Based off of M5272C3 board code by Josef Baumgartner + * <josef.baumgartner@telex.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef _M5275EVB_H +#define _M5275EVB_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_MCF52x2 /* define processor family */ +#define CONFIG_M5275 /* define processor type */ +#define CONFIG_M5275EVB /* define board type */ + +#define CONFIG_MCFTMR + +#define CONFIG_MCFUART +#define CFG_UART_PORT (0) +#define CONFIG_BAUDRATE 19200 +#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } + +/* Configuration for environment + * Environment is embedded in u-boot in the second sector of the flash + */ +#ifndef CONFIG_MONITOR_IS_IN_RAM +#define CFG_ENV_OFFSET 0x4000 +#define CFG_ENV_SECT_SIZE 0x2000 +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_IS_EMBEDDED 1 +#else +#define CFG_ENV_ADDR 0xffe04000 +#define CFG_ENV_SECT_SIZE 0x2000 +#define CFG_ENV_IS_IN_FLASH 1 +#endif + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* Available command configuration */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_DHCP + +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_LOADB + +#define CONFIG_MCFFEC +#ifdef CONFIG_MCFFEC +#define CONFIG_NET_MULTI 1 +#define CONFIG_MII 1 +#define CFG_DISCOVER_PHY +#define CFG_RX_ETH_BUFFER 8 +#define CFG_FAULT_ECHO_LINK_DOWN +#define CFG_FEC0_PINMUX 0 +#define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE +#define CFG_FEC1_PINMUX 0 +#define CFG_FEC1_MIIBASE CFG_FEC1_IOBASE +#define MCFFEC_TOUT_LOOP 50000 +#define CONFIG_HAS_ETH1 +/* If CFG_DISCOVER_PHY is not defined - hardcoded */ +#ifndef CFG_DISCOVER_PHY +#define FECDUPLEX FULL +#define FECSPEED _100BASET +#else +#ifndef CFG_FAULT_ECHO_LINK_DOWN +#define CFG_FAULT_ECHO_LINK_DOWN +#endif +#endif +#endif + +/* I2C */ +#define CONFIG_FSL_I2C +#define CONFIG_HARD_I2C /* I2C with hw support */ +#undef CONFIG_SOFT_I2C +#define CFG_I2C_SPEED 80000 +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_OFFSET 0x00000300 +#define CFG_IMMR CFG_MBAR + +#ifdef CONFIG_MCFFEC +#define CONFIG_ETHADDR 00:06:3b:01:41:55 +#define CONFIG_ETH1ADDR 00:0e:0c:bc:e5:60 +#endif + +#define CFG_PROMPT "-> " +#define CFG_LONGHELP /* undef to save memory */ + +#if (CONFIG_CMD_KGDB) +# define CFG_CBSIZE 1024 +#else +# define CFG_CBSIZE 256 +#endif +#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) +#define CFG_MAXARGS 16 +#define CFG_BARGSIZE CFG_CBSIZE + +#define CFG_LOAD_ADDR 0x800000 + +#define CONFIG_BOOTDELAY 5 +#define CONFIG_BOOTCOMMAND "bootm ffe40000" +#define CFG_MEMTEST_START 0x400 +#define CFG_MEMTEST_END 0x380000 + +#define CFG_HZ 1000 +#define CFG_CLK 150000000 + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ + +#define CFG_MBAR 0x40000000 + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR 0x20000000 +#define CFG_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */ +#define CFG_GBL_DATA_SIZE 1000 /* bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */ +#define CFG_FLASH_BASE 0xffe00000 + +#ifdef CONFIG_MONITOR_IS_IN_RAM +#define CFG_MONITOR_BASE 0x20000 +#else +#define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400) +#endif + +#define CFG_MONITOR_LEN 0x20000 +#define CFG_MALLOC_LEN (256 << 10) +#define CFG_BOOTPARAMS_LEN 64*1024 + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization ?? + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial mmap for Linux */ + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 11 /* max number of sectors on one chip */ +#define CFG_FLASH_ERASE_TOUT 1000 + +#define CFG_FLASH_CFI 1 +#define CFG_FLASH_CFI_DRIVER 1 +#define CFG_FLASH_SIZE 0x200000 + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 16 + +/*----------------------------------------------------------------------- + * Memory bank definitions + */ +#define CFG_AR0_PRELIM (CFG_FLASH_BASE >> 16) +#define CFG_CR0_PRELIM 0x1980 +#define CFG_MR0_PRELIM 0x001F0001 + +#define CFG_AR1_PRELIM 0x3000 +#define CFG_CR1_PRELIM 0x1900 +#define CFG_MR1_PRELIM 0x00070001 + +/*----------------------------------------------------------------------- + * Port configuration + */ +#define CFG_FECI2C 0x0FA0 + +#endif /* _M5275EVB_H */ |