diff options
author | wdenk <wdenk> | 2005-01-09 21:28:15 (GMT) |
---|---|---|
committer | wdenk <wdenk> | 2005-01-09 21:28:15 (GMT) |
commit | 6310eb9da74b1cf33194ae88275cc63b76e7a764 (patch) | |
tree | 0907eccba1dad0dd14c81f34e09976106d32dfa1 /include | |
parent | a562e1bd9d8e10ea2e51d08e66d35a6e1795153b (diff) | |
download | u-boot-6310eb9da74b1cf33194ae88275cc63b76e7a764.tar.xz |
Patches by David Snowdon, 07 Sep 2004:
- add u-boot.hex target in the top level Makefile
- add support for the UNSW/NICTA PLEB 2 board (pleb2)
- use -mtune=xscale and -march=armv5 options for PXA
Diffstat (limited to 'include')
-rw-r--r-- | include/asm-arm/arch-pxa/hardware.h | 16 | ||||
-rw-r--r-- | include/configs/pleb2.h | 250 |
2 files changed, 260 insertions, 6 deletions
diff --git a/include/asm-arm/arch-pxa/hardware.h b/include/asm-arm/arch-pxa/hardware.h index a76a029..3ff1d26 100644 --- a/include/asm-arm/arch-pxa/hardware.h +++ b/include/asm-arm/arch-pxa/hardware.h @@ -84,10 +84,10 @@ typedef struct { volatile u32 offset[4096]; } __regbase; # define __REG(x) io_p2v(x) # define __PREG(x) io_v2p(x) -# undef io_p2v +# undef io_p2v # undef __REG # ifndef __ASSEMBLY__ -# define io_p2v(PhAdd) (PhAdd) +# define io_p2v(PhAdd) (PhAdd) # define __REG(x) (*((volatile u32 *)io_p2v(x))) # define __REG2(x,y) (*(volatile u32 *)((u32)&__REG(x) + (y))) # else @@ -105,9 +105,9 @@ typedef struct { volatile u32 offset[4096]; } __regbase; * This must be called *before* the corresponding IRQ is registered. * Use this instead of directly setting GRER/GFER. */ -#define GPIO_FALLING_EDGE 1 -#define GPIO_RISING_EDGE 2 -#define GPIO_BOTH_EDGES 3 +#define GPIO_FALLING_EDGE 1 +#define GPIO_RISING_EDGE 2 +#define GPIO_BOTH_EDGES 3 extern void set_GPIO_IRQ_edge( int gpio_nr, int edge_mask ); /* @@ -147,4 +147,8 @@ extern unsigned int get_lclk_frequency_10khz(void); #include "innokom.h" #endif -#endif /* _ASM_ARCH_HARDWARE_H */ +#ifdef CONFIG_ARCH_PLEB +#include "pleb.h" +#endif + +#endif /* _ASM_ARCH_HARDWARE_H */ diff --git a/include/configs/pleb2.h b/include/configs/pleb2.h new file mode 100644 index 0000000..f733803 --- /dev/null +++ b/include/configs/pleb2.h @@ -0,0 +1,250 @@ +/* + * (C) Copyright 2002 + * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * Configuration settings for the PLEB 2 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * If we are developing, we might want to start armboot from ram + * so we MUST NOT initialize critical regs like mem-timing ... + */ +#define CONFIG_INIT_CRITICAL /* undef for developing */ + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_PXA250 1 /* This is an PXA255 CPU */ +#define CONFIG_PLEB2 1 /* on an PLEB2 Board */ +#undef CONFIG_LCD +#undef CONFIG_MMC +#define BOARD_LATE_INIT 1 + +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ + +/* + * Hardware drivers + */ + +/* None - PLEB 2 doesn't have any of this. + #define CONFIG_DRIVER_LAN91C96 + #define CONFIG_LAN91C96_BASE 0x0C000000 */ + +/* + * select serial console configuration + */ +#define CONFIG_FFUART 1 /* we use FFUART on PLEB 2 */ + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL & ~CFG_CMD_NET) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_ETHADDR 08:00:3e:26:0a:5b +#define CONFIG_NETMASK 255.255.0.0 +#define CONFIG_IPADDR 192.168.0.21 +#define CONFIG_SERVERIP 192.168.0.250 +#define CONFIG_BOOTCOMMAND "bootm 40000" +#define CONFIG_BOOTARGS "root=/dev/mtdblock2 prompt_ramdisk=0 load_ramdisk=1 console=ttyS0,115200" + +#define CONFIG_CMDLINE_TAG +#define CONFIG_INITRD_TAG +#define CONFIG_SETUP_MEMORY_TAGS + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Miscellaneous configurable options + */ +#define CFG_HUSH_PARSER 1 +#define CFG_PROMPT_HUSH_PS2 "> " + +#define CFG_LONGHELP /* undef to save memory */ +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT "$ " /* Monitor Command Prompt */ +#else +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#endif +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_DEVICE_NULLDEV 1 + +#define CFG_MEMTEST_START 0xa0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR 0xa2000000 /* default load address */ + +#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */ +#define CFG_CPUSPEED 0x141 /* set core clock to 200/200/100 MHz */ + + /* valid baudrates */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/* + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */ +#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ +#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ +#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */ +#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */ +#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ +#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ +#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */ + +#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ +#define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */ +#define PHYS_FLASH_SIZE 0x00800000 /* 4 MB */ + +/* Not entirely sure about this - DS/CHC */ +#define PHYS_FLASH_BANK_SIZE 0x02000000 /* 32 MB Banks */ +#define PHYS_FLASH_SECT_SIZE 0x00010000 /* 64 KB sectors (x2) */ + +#define CFG_DRAM_BASE PHYS_SDRAM_1 +#define CFG_DRAM_SIZE PHYS_SDRAM_1_SIZE + +#define CFG_FLASH_BASE PHYS_FLASH_1 +#define CFG_MONITOR_BASE CFG_FLASH_BASE + +/* + * GPIO settings + */ +#define CFG_GPSR0_VAL 0x00000000 /* Don't set anything */ +#define CFG_GPSR1_VAL 0x00000080 +#define CFG_GPSR2_VAL 0x00000000 + +#define CFG_GPCR0_VAL 0x00000000 /* Don't clear anything */ +#define CFG_GPCR1_VAL 0x00000000 +#define CFG_GPCR2_VAL 0x00000000 + +#define CFG_GPDR0_VAL 0x00000000 +#define CFG_GPDR1_VAL 0x000007C3 +#define CFG_GPDR2_VAL 0x00000000 + +/* Edge detect registers (these are set by the kernel) */ +#define CFG_GRER0_VAL 0x00000000 +#define CFG_GRER1_VAL 0x00000000 +#define CFG_GRER2_VAL 0x00000000 +#define CFG_GFER0_VAL 0x00000000 +#define CFG_GFER1_VAL 0x00000000 +#define CFG_GFER2_VAL 0x00000000 + +#define CFG_GAFR0_L_VAL 0x00000000 +#define CFG_GAFR0_U_VAL 0x00000000 +#define CFG_GAFR1_L_VAL 0x00008010 /* Use FF UART Send and Receive */ +#define CFG_GAFR1_U_VAL 0x00000000 +#define CFG_GAFR2_L_VAL 0x00000000 +#define CFG_GAFR2_U_VAL 0x00000000 + +#define CFG_PSSR_VAL 0x20 +#define CFG_CCCR_VAL 0x00000141 /* 100 MHz memory, 200 MHz CPU */ +#define CFG_CKEN_VAL 0x00000060 /* FFUART and STUART enabled */ +#define CFG_ICMR_VAL 0x00000000 /* No interrupts enabled */ + +/* + * Memory settings + */ +#define CFG_MSC0_VAL 0x00007FF0 /* Not properly calculated - FIXME (DS) */ +#define CFG_MSC1_VAL 0x00000000 +#define CFG_MSC2_VAL 0x00000000 + +#define CFG_MDCNFG_VAL 0x00000aC9 /* Memory timings for the SDRAM. + tRP=2, CL=2, tRCD=2, tRAS=5, tRC=8 */ + +#define CFG_MDREFR_VAL 0x00403018 /* Initial setting, individual + bits set in memsetup.S */ +#define CFG_MDMRS_VAL 0x00000000 + +/* + * PCMCIA and CF Interfaces + */ +#define CFG_MECR_VAL 0x00000000 /* Hangover from Lubbock. + Needs calculating. (DS/CHC) */ +#define CFG_MCMEM0_VAL 0x00010504 +#define CFG_MCMEM1_VAL 0x00010504 +#define CFG_MCATT0_VAL 0x00010504 +#define CFG_MCATT1_VAL 0x00010504 +#define CFG_MCIO0_VAL 0x00004715 +#define CFG_MCIO1_VAL 0x00004715 + +/* + * FLASH and environment organization + */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 64 /* max number of sectors on one chip */ + +/* timeout values are in ticks */ +/* FIXME */ +#define CFG_FLASH_ERASE_TOUT (25*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (25*CFG_HZ) /* Timeout for Flash Write */ + +/* Flash protection */ +#define CFG_FLASH_PROTECTION 1 + +/* FIXME */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x3C000) /* Addr of Environment Sector */ +#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment */ +#define CFG_ENV_SECT_SIZE 0x20000 + +/* Option added to get around byte ordering issues in the flash driver */ +#define CFG_LITTLE_ENDIAN 1 + +#endif /* __CONFIG_H */ |