diff options
author | Wolfgang Denk <wd@denx.de> | 2011-08-26 02:25:37 (GMT) |
---|---|---|
committer | Albert ARIBAUD <albert.u.boot@aribaud.net> | 2011-09-04 09:36:13 (GMT) |
commit | 69624195a3678b78569addf739b58275ae39460a (patch) | |
tree | 8afe38b7c82f9c455338609901bd18cacbdd062f /include | |
parent | 957731eda0fe7610de93f73ef54686a618dbc605 (diff) | |
download | u-boot-69624195a3678b78569addf739b58275ae39460a.tar.xz |
ARM: remove broken "mx1fs2" board
Signed-off-by: Wolfgang Denk <wd@denx.de>
Diffstat (limited to 'include')
-rw-r--r-- | include/configs/mx1fs2.h | 305 |
1 files changed, 0 insertions, 305 deletions
diff --git a/include/configs/mx1fs2.h b/include/configs/mx1fs2.h deleted file mode 100644 index ddbc65a..0000000 --- a/include/configs/mx1fs2.h +++ /dev/null @@ -1,305 +0,0 @@ -/* - * Copyright (C) 2004 Sascha Hauer, Pengutronix - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_ARM920T 1 /* this is an ARM920T CPU */ -#define CONFIG_IMX 1 /* in a Motorola MC9328MXL Chip */ -#define CONFIG_MX1FS2 1 /* on a mx1fs2 board */ -#undef CONFIG_USE_IRQ /* don't need use IRQ/FIQ */ - -/* - * Select serial console configuration - */ -#undef _CONFIG_UART1 /* internal uart 1 */ -#define _CONFIG_UART2 /* internal uart 2 */ -#undef _CONFIG_UART3 /* internal uart 3 */ -#undef _CONFIG_UART4 /* internal uart 4 */ -#undef CONFIG_SILENT_CONSOLE /* use this to disable output */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_JFFS2 - -#undef CONFIG_CMD_CONSOLE -#undef CONFIG_CMD_DHCP -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_NET -#undef CONFIG_CMD_PING -#undef CONFIG_CMD_SOURCE - -/* - * Boot options. Setting delay to -1 stops autostart count down. - */ -#define CONFIG_BOOTDELAY 10 -#define CONFIG_BOOTARGS "root=/dev/mtdblock4 console=ttySMX0,115200n8 rootfstype=jffs2" -#define CONFIG_BOOTCOMMAND "bootm 10080000" -#define CONFIG_SHOW_BOOT_PROGRESS - -/* - * General options for u-boot. Modify to save memory foot print - */ -#define CONFIG_SYS_LONGHELP /* undef saves memory */ -#define CONFIG_SYS_PROMPT "mx1fs2> " /* prompt string */ -#define CONFIG_SYS_CBSIZE 256 /* console I/O buffer */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* print buffer size */ -#define CONFIG_SYS_MAXARGS 16 /* max command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* boot args buf size */ - -#define CONFIG_SYS_MEMTEST_START 0x08100000 /* memtest test area */ -#define CONFIG_SYS_MEMTEST_END 0x08F00000 - -#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */ -#define CONFIG_SYS_CPUSPEED 0x141 /* core clock - register value */ - -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -#define CONFIG_BAUDRATE 115200 -/* - * Definitions related to passing arguments to kernel. - */ -#define CONFIG_CMDLINE_TAG 1 /* send commandline to Kernel */ -#define CONFIG_SETUP_MEMORY_TAGS 1 /* send memory definition to kernel */ -#define CONFIG_INITRD_TAG 1 /* send initrd params */ - -/* - * Malloc pool need to host env + 128 Kb reserve for other allocations. - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128<<10) ) - -#define CONFIG_STACKSIZE (120<<10) /* stack size */ - -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4<<10) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4<<10) /* FIQ stack */ -#endif - -/* SDRAM Setup Values - * 0x910a8300 Precharge Command CAS 3 - * 0x910a8200 Precharge Command CAS 2 - * - * 0xa10a8300 AutoRefresh Command CAS 3 - * 0xa10a8200 Set AutoRefresh Command CAS 2 - */ -#define PRECHARGE_CMD 0x910a8300 -#define AUTOREFRESH_CMD 0xa10a8300 - -#define BUS32BIT_VERSION -/* - * SDRAM Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of SDRAM */ -#define MX1FS2_SDRAM_1 0x08000000 /* SDRAM bank #1 */ -#ifdef BUS32BIT_VERSION -#define MX1FS2_SDRAM_1_SIZE (0x04000000 - 0x100000) /* 64 MB - 1M Framebuffer */ -#else -#define MX1FS2_SDRAM_1_SIZE (0x01FC0000 - 0x100000) /* 32 MB - 1M Framebuffer */ -#endif -/* - * Flash Controller settings - */ - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* FLASH banks count (not chip count)*/ -#define CONFIG_SYS_MAX_FLASH_SECT 256 /* number of sector in FLASH bank */ - -#ifdef BUS32BIT_VERSION -#define MX1FS2_FLASH_BUS_WIDTH 4 /* we use 32 bit FLASH memory... */ -#define MX1FS2_FLASH_INTERLEAVE 2 /* ... made of 2 chips */ -#define MX1FS2_FLASH_BANK_SIZE 0x02000000 /* size of one flash bank*/ -#define MX1FS2_FLASH_SECT_SIZE 0x00020000 /* size of erase sector */ -#else -#define MX1FS2_FLASH_BUS_WIDTH 2 /* we use 16 bit FLASH memory... */ -#define MX1FS2_FLASH_INTERLEAVE 1 /* ... made of 1 chip */ -#define MX1FS2_FLASH_BANK_SIZE 0x01000000 /* size of one flash bank*/ -#define MX1FS2_FLASH_SECT_SIZE 0x00010000 /* size of erase sector */ -#endif -#define MX1FS2_FLASH_BASE 0x10000000 /* location of flash memory */ -#define MX1FS2_FLASH_UNLOCK 1 /* perform hw unlock first */ - -/* This should be defined if CFI FLASH device is present. Actually benefit - is not so clear to me. In other words we can provide more informations - to user, but this expects more complex flash handling we do not provide - now.*/ -#undef CONFIG_SYS_FLASH_CFI - -#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* timeout for Erase operation */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* timeout for Write operation */ - -#define CONFIG_SYS_FLASH_BASE MX1FS2_FLASH_BASE - -/* - * This is setting for JFFS2 support in u-boot. - * Right now there is no gain for user, but later on booting kernel might be - * possible. Consider using XIP kernel running from flash to save RAM - * footprint. - * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support. - */ - -/* - * JFFS2 partitions - */ -/* No command line, one static partition, whole device */ -/* -#undef CONFIG_CMD_MTDPARTS -#define CONFIG_JFFS2_DEV "nor0" -#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF -#define CONFIG_JFFS2_PART_OFFSET 0x00050000 -*/ - -/* mtdparts command line support */ -/* Note: fake mtd_id used, no linux mtd map file */ -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define CONFIG_FLASH_CFI_MTD -#define MTDIDS_DEFAULT "nor0=mx1fs2-0" - -#ifdef BUS32BIT_VERSION -#define MTDPARTS_DEFAULT "mtdparts=mx1fs2-0:2m@5m(part0),5m@9m(part1)" -#else -#define MTDPARTS_DEFAULT "mtdparts=mx1fs2-0:-@320k(jffs2)" -#endif - -/* - * Environment setup. Definitions of monitor location and size with - * definition of environment setup ends up in 2 possibilities. - * 1. Embeded environment - in u-boot code is space for environment - * 2. Environment is read from predefined sector of flash - * Right now we support 2. possiblity, but expecting no env placed - * on mentioned address right now. This also needs to provide whole - * sector for it - for us 256Kb is really waste of memory. U-boot uses - * default env. and until kernel parameters could be sent to kernel - * env. has no sense to us. - */ - -#define CONFIG_SYS_MONITOR_BASE 0x10000000 -#define CONFIG_SYS_MONITOR_LEN 0x20000 /* 128b ( 1 flash sector ) */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR 0x10020000 /* absolute address for now */ -#define CONFIG_ENV_SIZE 0x20000 - -#define CONFIG_ENV_OVERWRITE 1 /* env is not writable now */ - -/* Setup CS4 and CS5 */ -#define CONFIG_SYS_GIUS_A_VAL 0x0003fffe - -/* - * CSxU_VAL: - * 63| x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x|32 - * |DTACK_SEL|0|BCD | BCS | PSZ|PME|SYNC| DOL | CNC| WSC | 0| WWS | EDC | - * - * CSxL_VAL: - * 31| x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x| 0 - * | OEA | OEN | WEA | WEN | CSA |EBC| DSZ | 0|SP|0|WP| 0 0|PA|CSEN| - */ - -#define CONFIG_SYS_CS0U_VAL 0x00008C00 -#define CONFIG_SYS_CS0L_VAL 0x22222601 -#define CONFIG_SYS_CS1U_VAL 0x00008C00 -#define CONFIG_SYS_CS1L_VAL 0x22222301 -#define CONFIG_SYS_CS4U_VAL 0x00008C00 -#define CONFIG_SYS_CS4L_VAL 0x22222301 -#define CONFIG_SYS_CS5U_VAL 0x00008C00 -#define CONFIG_SYS_CS5L_VAL 0x22222301 - -/* f_{dpll}=2*f{ref}*(MFI+MFN/(MFD+1))/(PD+1) - f_ref=16,777MHz - - 0x002a141f: 191,9944MHz - 0x040b2007: 144MHz - 0x042a141f: 96MHz - 0x0811140d: 64MHz - 0x040e200e: 150MHz - 0x00321431: 200MHz - - 0x08001800: 64MHz mit 16er Quarz - 0x04001800: 96MHz mit 16er Quarz - 0x04002400: 144MHz mit 16er Quarz - - 31 |x x x x|x x x x|x x x x|x x x x|x x x x|x x x x|x x x x|x x x x| 0 - |XXX|--PD---|-------MFD---------|XXX|--MFI--|-----MFN-----------| */ - -#define CONFIG_SYS_MPCTL0_VAL 0x07E723AD -#define CONFIG_SYS_MPCTL1_VAL 0x00000040 -#define CONFIG_SYS_PCDR_VAL 0x00010005 -#define CONFIG_SYS_GPCR_VAL 0x00000FFB - -#define USE_16M_OSZI /* If you have one, you want to use it - The internal 32kHz oszillator jitters */ -#ifdef USE_16M_OSZI - -#define CONFIG_SYS_SPCTL0_VAL 0x04001401 -#define CONFIG_SYS_SPCTL1_VAL 0x0C000040 -#define CONFIG_SYS_CSCR_VAL 0x07030003 -#define CONFIG_SYS_CLK_FREQ 16780000 -#define CONFIG_SYSPLL_CLK_FREQ 16000000 - -#else - -#define CONFIG_SYS_SPCTL0_VAL 0x07E716D1 -#define CONFIG_SYS_CSCR_VAL 0x06000003 -#define CONFIG_SYS_CLK_FREQ 16780000 -#define CONFIG_SYSPLL_CLK_FREQ 16780000 - -#endif - -/* - * Well this has to be defined, but on the other hand it is used differently - * one may expect. For instance loadb command do not cares :-) - * So advice is - do not relay on this... - */ -#define CONFIG_SYS_LOAD_ADDR 0x08400000 - -#define CONFIG_SYS_FMCR_VAL 0x00000003 /* Reset Default */ - -/* Bit[0:3] contain PERCLK1DIV for UART 1 - 0x000b00b ->b<- -> 192MHz/12=16MHz - 0x000b00b ->8<- -> 144MHz/09=16MHz - 0x000b00b ->3<- -> 64MHz/4=16MHz */ - -#ifdef _CONFIG_UART1 -#define CONFIG_IMX_SERIAL -#define CONFIG_IMX_SERIAL1 -#elif defined _CONFIG_UART2 -#define CONFIG_IMX_SERIAL -#define CONFIG_IMX_SERIAL2 -#elif defined _CONFIG_UART3 | defined _CONFIG_UART4 -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_CLK 3686400 -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_CONS_INDEX 1 -#ifdef _CONFIG_UART3 -#define CONFIG_SYS_NS16550_COM1 0x15000000 -#elif defined _CONFIG_UART4 -#define CONFIG_SYS_NS16550_COM1 0x16000000 -#endif -#endif - -#endif /* __CONFIG_H */ |