Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'

5 files changed, 7 insertions, 237 deletions

diff --git a/include/configs/cam_enc_4xx.h b/include/configs/cam_enc_4xx.h
index c1042ae..8182a75 100644
--- a/include/configs/cam_enc_4xx.h
+++ b/include/configs/cam_enc_4xx.h
@@ -236,6 +236,8 @@
 #define CONFIG_SYS_NAND_BAD_BLOCK_POS	0
 #define CONFIG_SYS_NAND_ECCSIZE		0x200
 #define CONFIG_SYS_NAND_ECCBYTES	10
+#define CONFIG_SYS_NAND_MAX_OOBFREE	2
+#define CONFIG_SYS_NAND_MAX_ECCPOS	56
 #define CONFIG_SYS_NAND_OOBSIZE		64
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index 4640c43..7729a02 100644
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -316,6 +316,7 @@
 
 /* Display Configuration */
 #define CONFIG_OMAP3_GPIO_2
+#define CONFIG_OMAP3_GPIO_5
 #define CONFIG_VIDEO_OMAP3
 #define LCD_BPP		LCD_COLOR16
 
diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h
deleted file mode 100644
index f749740..0000000
--- a/include/configs/omap3_zoom2.h
+++ /dev/null
@@ -1,237 +0,0 @@
-/*
- * (C) Copyright 2006-2009
- * Texas Instruments.
- * Richard Woodruff <r-woodruff2@ti.com>
- * Syed Mohammed Khasim <x0khasim@ti.com>
- * Nishanth Menon <nm@ti.com>
- * Tom Rix <Tom.Rix@windriver.com>
- *
- * Configuration settings for the TI OMAP3430 Zoom II board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_OMAP		1	/* in a TI OMAP core */
-#define CONFIG_OMAP34XX		1	/* which is a 34XX */
-#define CONFIG_OMAP3_ZOOM2	1	/* working with Zoom II */
-#define CONFIG_OMAP_GPIO
-#define CONFIG_OMAP_COMMON
-
-#define CONFIG_SDRC	/* The chip has SDRC controller */
-
-#include <asm/arch/cpu.h>	/* get chip and board defs */
-#include <asm/arch/omap3.h>
-
-/*
- * Display CPU and Board information
- */
-#define CONFIG_DISPLAY_CPUINFO		1
-#define CONFIG_DISPLAY_BOARDINFO	1
-
-/* Clock Defines */
-#define V_OSCK			26000000	/* Clock output from T2 */
-#define V_SCLK			(V_OSCK >> 1)
-
-#define CONFIG_MISC_INIT_R
-
-#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS	1
-#define CONFIG_INITRD_TAG		1
-#define CONFIG_REVISION_TAG		1
-
-#define CONFIG_OF_LIBFDT		1
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
-						/* Sector */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (128 << 10))
-/*
- * Hardware drivers
- */
-
-/*
- * NS16550 Configuration
- * Zoom2 uses the TL16CP754C on the debug board
- */
-/*
- * 0 - 1 : first  USB with respect to the left edge of the debug board
- * 2 - 3 : second USB with respect to the left edge of the debug board
- */
-#define ZOOM2_DEFAULT_SERIAL_DEVICE	0
-
-#define V_NS16550_CLK			(1843200)	/* 1.8432 Mhz */
-
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_REG_SIZE	(-2)
-#define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK
-#define CONFIG_BAUDRATE			115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{115200}
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_GENERIC_MMC		1
-#define CONFIG_MMC			1
-#define CONFIG_OMAP_HSMMC		1
-#define CONFIG_DOS_PARTITION		1
-
-/* Status LED */
-#define CONFIG_STATUS_LED		1 /* Status LED enabled	*/
-#define CONFIG_BOARD_SPECIFIC_LED	1
-#define STATUS_LED_BLUE			0
-#define STATUS_LED_RED			1
-/* Blue */
-#define STATUS_LED_BIT			STATUS_LED_BLUE
-#define STATUS_LED_STATE		STATUS_LED_ON
-#define STATUS_LED_PERIOD		(CONFIG_SYS_HZ / 2)
-/* Red */
-#define STATUS_LED_BIT1			STATUS_LED_RED
-#define STATUS_LED_STATE1		STATUS_LED_OFF
-#define STATUS_LED_PERIOD1		(CONFIG_SYS_HZ / 2)
-/* Optional value */
-#define STATUS_LED_BOOT			STATUS_LED_BIT
-
-/* GPIO banks */
-#ifdef CONFIG_STATUS_LED
-#define CONFIG_OMAP3_GPIO_2 /* ZOOM2_LED_BLUE2 */
-#define CONFIG_OMAP3_GPIO_6 /* ZOOM2_LED_RED */
-#endif
-#define CONFIG_OMAP3_GPIO_3 /* board revision */
-#define CONFIG_OMAP3_GPIO_5 /* debug board detection, ZOOM2_LED_BLUE */
-
-/* USB */
-#define CONFIG_MUSB_UDC			1
-#define CONFIG_USB_OMAP3		1
-#define CONFIG_TWL4030_USB		1
-
-/* USB device configuration */
-#define CONFIG_USB_DEVICE		1
-#define CONFIG_USB_TTY			1
-/* Change these to suit your needs */
-#define CONFIG_USBD_VENDORID		0x0451
-#define CONFIG_USBD_PRODUCTID		0x5678
-#define CONFIG_USBD_MANUFACTURER	"Texas Instruments"
-#define CONFIG_USBD_PRODUCT_NAME	"Zoom2"
-
-/* commands to include */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_FAT			/* FAT support			*/
-#define CONFIG_CMD_I2C			/* I2C serial bus support	*/
-#define CONFIG_CMD_MMC			/* MMC support			*/
-#define CONFIG_CMD_NAND			/* NAND support			*/
-#define CONFIG_CMD_NAND_LOCK_UNLOCK	/* Enable lock/unlock support	*/
-
-#undef CONFIG_CMD_FLASH			/* flinfo, erase, protect	*/
-#undef CONFIG_CMD_FPGA			/* FPGA configuration Support	*/
-#undef CONFIG_CMD_IMI			/* iminfo			*/
-#undef CONFIG_CMD_IMLS			/* List all found images	*/
-#undef CONFIG_CMD_NET			/* bootp, tftpboot, rarpboot	*/
-#undef CONFIG_CMD_NFS			/* NFS support			*/
-
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
-#define CONFIG_SYS_I2C_OMAP34XX
-
-/*
- * TWL4030
- */
-#define CONFIG_TWL4030_POWER		1
-#define CONFIG_TWL4030_LED		1
-
-/*
- * Board NAND Info.
- */
-#define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
-							/* to access nand */
-#define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
-							/* to access nand at */
-							/* CS0 */
-#define GPMC_NAND_ECC_LP_x16_LAYOUT	1
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-
-/* Environment information */
-#define CONFIG_BOOTDELAY		10
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"usbtty=cdc_acm\0" \
-
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
-#define CONFIG_SYS_INIT_RAM_SIZE	0x800
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
-					 CONFIG_SYS_INIT_RAM_SIZE - \
-					 GENERATED_GBL_DATA_SIZE)
-/*
- * Miscellaneous configurable options
- */
-
-#define CONFIG_SYS_PROMPT		"OMAP3 Zoom2 # "
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_CBSIZE		512
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					 sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS		16
-#define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)
-/* Memtest from start of memory to 31MB */
-#define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)
-#define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + 0x01F00000)
-/* The default load address is the start of memory */
-#define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0)
-/* everything, incl board info, in Hz */
-#undef CONFIG_SYS_CLKS_IN_HZ
-/*
- * 2430 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by
- * 32KHz clk, or from external sig. This rate is divided by a local divisor.
- */
-#define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
-#define CONFIG_SYS_PTV			7	/* 2^(PTV+1) */
-#define CONFIG_SYS_HZ			((V_SCLK) / (2 << CONFIG_SYS_PTV))
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
-#define PHYS_SDRAM_1		OMAP34XX_SDRC_CS0
-#define PHYS_SDRAM_2		OMAP34XX_SDRC_CS1
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-
-/* **** PISMO SUPPORT *** */
-
-/* Configure the PISMO */
-#define PISMO1_NAND_SIZE		GPMC_SIZE_128M
-#define PISMO1_ONEN_SIZE		GPMC_SIZE_128M
-
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */
-
-#if defined(CONFIG_CMD_NAND)
-#define CONFIG_SYS_FLASH_BASE		PISMO1_NAND_BASE
-#endif
-
-/* Monitor at start of flash */
-#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
-
-#define CONFIG_ENV_IS_IN_NAND		1
-#define SMNAND_ENV_OFFSET		0x0c0000 /* environment starts here */
-
-#define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
-#define CONFIG_ENV_OFFSET		SMNAND_ENV_OFFSET
-#define CONFIG_ENV_ADDR			SMNAND_ENV_OFFSET
-
-#define CONFIG_SYS_CACHELINE_SIZE	64
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
index 439fc47..d44b5c0 100644
--- a/include/configs/tam3517-common.h
+++ b/include/configs/tam3517-common.h
@@ -224,6 +224,7 @@
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_CONSOLE
 #define CONFIG_SPL_NAND_SIMPLE
+#define CONFIG_SPL_NAND_SOFTECC
 #define CONFIG_SPL_NAND_WORKSPACE	0x8f07f000 /* below BSS */
 
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
diff --git a/include/configs/twister.h b/include/configs/twister.h
index b6ca59c..f24dc13 100644
--- a/include/configs/twister.h
+++ b/include/configs/twister.h
@@ -50,4 +50,7 @@
 #define CONFIG_SYS_SPL_ARGS_ADDR	(PHYS_SDRAM_1 + 0x100)
 #define CONFIG_SPL_BOARD_INIT
 
+/* gpio 55 is used as SPL_OS_BOOT_KEY */
+#define CONFIG_OMAP3_GPIO_2
+
 #endif /* __CONFIG_H */