diff options
author | Michal Simek <monstr@monstr.eu> | 2008-07-11 09:50:53 (GMT) |
---|---|---|
committer | Wolfgang Denk <wd@denx.de> | 2008-07-13 13:26:18 (GMT) |
commit | 6ecbb45bb027e90c19d63b48e7b0c05acc1a87c0 (patch) | |
tree | db647af285d1d0fedc4dd29d88a8a9cf9fa97156 /include | |
parent | c78fce699c7ff467ecd841da6a79f065180bf578 (diff) | |
download | u-boot-6ecbb45bb027e90c19d63b48e7b0c05acc1a87c0.tar.xz |
hwmon: Cleaning hwmon devices
Clean Makefile
Move device specific values to driver for better reading
Signed-off-by: Michal Simek <monstr@monstr.eu>
Acked-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'include')
-rw-r--r-- | include/dtt.h | 77 |
1 files changed, 2 insertions, 75 deletions
diff --git a/include/dtt.h b/include/dtt.h index 4e8aaad..34053d1 100644 --- a/include/dtt.h +++ b/include/dtt.h @@ -40,9 +40,11 @@ #define DTT_COMMERCIAL_MAX_TEMP 70 /* 0 - +70 C */ #define DTT_INDUSTRIAL_MAX_TEMP 85 /* -40 - +85 C */ #define DTT_AUTOMOTIVE_MAX_TEMP 105 /* -40 - +105 C */ + #ifndef CFG_DTT_MAX_TEMP #define CFG_DTT_MAX_TEMP DTT_COMMERCIAL_MAX_TEMP #endif + #ifndef CFG_DTT_HYSTERESIS #define CFG_DTT_HYSTERESIS 5 /* 5 C */ #endif @@ -54,79 +56,4 @@ extern int dtt_write(int sensor, int reg, int val); extern int dtt_get_temp(int sensor); #endif -#if defined(CONFIG_DTT_LM75) -#define DTT_READ_TEMP 0x0 -#define DTT_CONFIG 0x1 -#define DTT_TEMP_HYST 0x2 -#define DTT_TEMP_SET 0x3 -#endif - -#if defined(CONFIG_DTT_LM81) -#define DTT_READ_TEMP 0x27 -#define DTT_CONFIG_TEMP 0x4b -#define DTT_TEMP_MAX 0x39 -#define DTT_TEMP_HYST 0x3a -#define DTT_CONFIG 0x40 -#endif - -#if defined(CONFIG_DTT_DS1621) -#define DTT_READ_TEMP 0xAA -#define DTT_READ_COUNTER 0xA8 -#define DTT_READ_SLOPE 0xA9 -#define DTT_WRITE_START_CONV 0xEE -#define DTT_WRITE_STOP_CONV 0x22 -#define DTT_TEMP_HIGH 0xA1 -#define DTT_TEMP_LOW 0xA2 -#define DTT_CONFIG 0xAC -#endif - -#if defined(CONFIG_DTT_DS1775) -#define DTT_READ_TEMP 0x0 -#define DTT_CONFIG 0x1 -#define DTT_TEMP_HYST 0x2 -#define DTT_TEMP_OS 0x3 -#endif - -#if defined(CONFIG_DTT_ADM1021) -#define DTT_READ_LOC_VALUE 0x00 -#define DTT_READ_REM_VALUE 0x01 -#define DTT_READ_STATUS 0x02 -#define DTT_READ_CONFIG 0x03 -#define DTT_READ_CONVRATE 0x04 -#define DTT_READ_LOC_HIGHLIM 0x05 -#define DTT_READ_LOC_LOWLIM 0x06 -#define DTT_READ_REM_HIGHLIM 0x07 -#define DTT_READ_REM_LOWLIM 0x08 -#define DTT_READ_DEVID 0xfe - -#define DTT_WRITE_CONFIG 0x09 -#define DTT_WRITE_CONVRATE 0x0a -#define DTT_WRITE_LOC_HIGHLIM 0x0b -#define DTT_WRITE_LOC_LOWLIM 0x0c -#define DTT_WRITE_REM_HIGHLIM 0x0d -#define DTT_WRITE_REM_LOWLIM 0x0e -#define DTT_WRITE_ONESHOT 0x0f - -#define DTT_STATUS_BUSY 0x80 /* 1=ADC Converting */ -#define DTT_STATUS_LHIGH 0x40 /* 1=Local High Temp Limit Tripped */ -#define DTT_STATUS_LLOW 0x20 /* 1=Local Low Temp Limit Tripped */ -#define DTT_STATUS_RHIGH 0x10 /* 1=Remote High Temp Limit Tripped */ -#define DTT_STATUS_RLOW 0x08 /* 1=Remote Low Temp Limit Tripped */ -#define DTT_STATUS_OPEN 0x04 /* 1=Remote Sensor Open-Circuit */ - -#define DTT_CONFIG_ALERT_MASKED 0x80 /* 0=ALERT Enabled, 1=ALERT Masked */ -#define DTT_CONFIG_STANDBY 0x40 /* 0=Run, 1=Standby */ - -#define DTT_ADM1021_DEVID 0x41 -#endif - -#if defined(CONFIG_DTT_LM73) -#define DTT_READ_TEMP 0x0 -#define DTT_CONFIG 0x1 -#define DTT_TEMP_HIGH 0x2 -#define DTT_TEMP_LOW 0x3 -#define DTT_CONTROL 0x4 -#define DTT_ID 0x7 -#endif - #endif /* _DTT_H_ */ |