Merge git://git.denx.de/u-boot-fsl-qoriq

19 files changed, 292 insertions, 169 deletions

diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h
index 20f0c61..910835e 100644
--- a/include/configs/ls1012a_common.h
+++ b/include/configs/ls1012a_common.h
@@ -19,9 +19,7 @@
 
 #define CONFIG_SYS_TEXT_BASE		0x40100000
 
-#define CONFIG_SYS_FSL_CLK
-#define CONFIG_SYS_CLK_FREQ		100000000
-#define CONFIG_DDR_CLK_FREQ		125000000
+#define CONFIG_SYS_CLK_FREQ		125000000
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_BOARD_EARLY_INIT_F	1
@@ -82,7 +80,7 @@
 #define CONFIG_CONS_INDEX       1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE     1
-#define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
+#define CONFIG_SYS_NS16550_CLK          (get_serial_clock())
 
 #define CONFIG_BAUDRATE			115200
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
diff --git a/include/configs/ls1012afrdm.h b/include/configs/ls1012afrdm.h
index f6f88e8..94f7460 100644
--- a/include/configs/ls1012afrdm.h
+++ b/include/configs/ls1012afrdm.h
@@ -42,6 +42,11 @@
 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
 #endif
 
+#define CONFIG_DOS_PARTITION
+#define CONFIG_PARTITION_UUIDS
+#define CONFIG_EFI_PARTITION
+#define CONFIG_CMD_GPT
+
 #define CONFIG_CMD_MEMINFO
 #define CONFIG_CMD_MEMTEST
 #define CONFIG_SYS_MEMTEST_START	0x80000000
diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h
index b5b4d7e..fa1ed73 100644
--- a/include/configs/ls1012aqds.h
+++ b/include/configs/ls1012aqds.h
@@ -153,24 +153,11 @@
 #define CONFIG_SYS_SCSI_MAX_LUN			1
 #define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 						CONFIG_SYS_SCSI_MAX_LUN)
-#define CONFIG_PCIE1		/* PCIE controller 1 */
-#define CONFIG_PCIE_LAYERSCAPE	/* Use common FSL Layerscape PCIe code */
-#define FSL_PCIE_COMPAT "fsl,ls1043a-pcie"
-
-#define CONFIG_SYS_PCI_64BIT
-
-#define CONFIG_SYS_PCIE_CFG0_PHYS_OFF	0x00000000
-#define CONFIG_SYS_PCIE_CFG0_SIZE	0x00001000	/* 4k */
-#define CONFIG_SYS_PCIE_CFG1_PHYS_OFF	0x00001000
-#define CONFIG_SYS_PCIE_CFG1_SIZE	0x00001000	/* 4k */
+#define CONFIG_PARTITION_UUIDS
+#define CONFIG_EFI_PARTITION
+#define CONFIG_CMD_GPT
 
-#define CONFIG_SYS_PCIE_IO_BUS		0x00000000
-#define CONFIG_SYS_PCIE_IO_PHYS_OFF	0x00010000
-#define CONFIG_SYS_PCIE_IO_SIZE		0x00010000	/* 64k */
-
-#define CONFIG_SYS_PCIE_MEM_BUS         0x08000000
-#define CONFIG_SYS_PCIE_MEM_PHYS_OFF    0x04000000
-#define CONFIG_SYS_PCIE_MEM_SIZE        0x80000000      /* 128M */
+#define CONFIG_PCIE1		/* PCIE controller 1 */
 
 #define CONFIG_NET_MULTI
 #define CONFIG_PCI_SCAN_SHOW
diff --git a/include/configs/ls1012ardb.h b/include/configs/ls1012ardb.h
index f35fd31..d2dc5ea 100644
--- a/include/configs/ls1012ardb.h
+++ b/include/configs/ls1012ardb.h
@@ -66,24 +66,11 @@
 #define CONFIG_SYS_SCSI_MAX_LUN			1
 #define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 						CONFIG_SYS_SCSI_MAX_LUN)
-#define CONFIG_PCIE1		/* PCIE controller 1 */
-#define CONFIG_PCIE_LAYERSCAPE	/* Use common FSL Layerscape PCIe code */
-#define FSL_PCIE_COMPAT "fsl,ls1043a-pcie"
-
-#define CONFIG_SYS_PCI_64BIT
-
-#define CONFIG_SYS_PCIE_CFG0_PHYS_OFF	0x00000000
-#define CONFIG_SYS_PCIE_CFG0_SIZE	0x00001000	/* 4k */
-#define CONFIG_SYS_PCIE_CFG1_PHYS_OFF	0x00001000
-#define CONFIG_SYS_PCIE_CFG1_SIZE	0x00001000	/* 4k */
+#define CONFIG_PARTITION_UUIDS
+#define CONFIG_EFI_PARTITION
+#define CONFIG_CMD_GPT
 
-#define CONFIG_SYS_PCIE_IO_BUS		0x00000000
-#define CONFIG_SYS_PCIE_IO_PHYS_OFF	0x00010000
-#define CONFIG_SYS_PCIE_IO_SIZE		0x00010000	/* 64k */
-
-#define CONFIG_SYS_PCIE_MEM_BUS         0x08000000
-#define CONFIG_SYS_PCIE_MEM_PHYS_OFF    0x04000000
-#define CONFIG_SYS_PCIE_MEM_SIZE        0x80000000      /* 128M */
+#define CONFIG_PCIE1		/* PCIE controller 1 */
 
 #define CONFIG_NET_MULTI
 #define CONFIG_PCI_SCAN_SHOW
diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h
index ae8ee24..9c3b163 100644
--- a/include/configs/ls1021aiot.h
+++ b/include/configs/ls1021aiot.h
@@ -179,6 +179,9 @@
 
 #define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
+#define CONFIG_PARTITION_UUIDS
+#define CONFIG_EFI_PARTITION
+#define CONFIG_CMD_GPT
 
 /* SPI */
 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
@@ -232,31 +235,12 @@
 #endif
 
 /* PCIe */
-#define CONFIG_PCI		/* Enable PCI/PCIE */
 #define CONFIG_PCIE1		/* PCIE controler 1 */
 #define CONFIG_PCIE2		/* PCIE controler 2 */
 
-/* Use common FSL Layerscape PCIe code */
-#define CONFIG_PCIE_LAYERSCAPE
 #define FSL_PCIE_COMPAT		"fsl,ls1021a-pcie"
 
-#define CONFIG_SYS_PCI_64BIT
-
-#define CONFIG_SYS_PCIE_CFG0_PHYS_OFF	0x00000000
-#define CONFIG_SYS_PCIE_CFG0_SIZE	0x00001000	/* 4k */
-#define CONFIG_SYS_PCIE_CFG1_PHYS_OFF	0x00001000
-#define CONFIG_SYS_PCIE_CFG1_SIZE	0x00001000	/* 4k */
-
-#define CONFIG_SYS_PCIE_IO_BUS		0x00000000
-#define CONFIG_SYS_PCIE_IO_PHYS_OFF	0x00010000
-#define CONFIG_SYS_PCIE_IO_SIZE		0x00010000	/* 64k */
-
-#define CONFIG_SYS_PCIE_MEM_BUS		0x08000000
-#define CONFIG_SYS_PCIE_MEM_PHYS_OFF	0x04000000
-#define CONFIG_SYS_PCIE_MEM_SIZE	0x08000000	/* 128M */
-
 #ifdef CONFIG_PCI
-#define CONFIG_PCI_PNP
 #define CONFIG_PCI_SCAN_SHOW
 #define CONFIG_CMD_PCI
 #endif
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 6f857a7..031dce7 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -397,6 +397,9 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_GENERIC_MMC
 
 #define CONFIG_DOS_PARTITION
+#define CONFIG_PARTITION_UUIDS
+#define CONFIG_EFI_PARTITION
+#define CONFIG_CMD_GPT
 
 /* SPI */
 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
@@ -500,23 +503,6 @@ unsigned long get_board_ddr_clk(void);
 /* PCIe */
 #define CONFIG_PCIE1		/* PCIE controller 1 */
 #define CONFIG_PCIE2		/* PCIE controller 2 */
-#define CONFIG_PCIE_LAYERSCAPE	/* Use common FSL Layerscape PCIe code */
-#define FSL_PCIE_COMPAT "fsl,ls1021a-pcie"
-
-#define CONFIG_SYS_PCI_64BIT
-
-#define CONFIG_SYS_PCIE_CFG0_PHYS_OFF	0x00000000
-#define CONFIG_SYS_PCIE_CFG0_SIZE	0x00001000	/* 4k */
-#define CONFIG_SYS_PCIE_CFG1_PHYS_OFF	0x00001000
-#define CONFIG_SYS_PCIE_CFG1_SIZE	0x00001000	/* 4k */
-
-#define CONFIG_SYS_PCIE_IO_BUS		0x00000000
-#define CONFIG_SYS_PCIE_IO_PHYS_OFF	0x00010000
-#define CONFIG_SYS_PCIE_IO_SIZE		0x00010000	/* 64k */
-
-#define CONFIG_SYS_PCIE_MEM_BUS		0x08000000
-#define CONFIG_SYS_PCIE_MEM_PHYS_OFF	0x04000000
-#define CONFIG_SYS_PCIE_MEM_SIZE	0x08000000	/* 128M */
 
 #ifdef CONFIG_PCI
 #define CONFIG_PCI_SCAN_SHOW
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index b48cd00..1f179f4 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -298,6 +298,9 @@
 #define CONFIG_GENERIC_MMC
 
 #define CONFIG_DOS_PARTITION
+#define CONFIG_PARTITION_UUIDS
+#define CONFIG_EFI_PARTITION
+#define CONFIG_CMD_GPT
 
 /* SPI */
 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
@@ -370,23 +373,6 @@
 /* PCIe */
 #define CONFIG_PCIE1		/* PCIE controller 1 */
 #define CONFIG_PCIE2		/* PCIE controller 2 */
-#define CONFIG_PCIE_LAYERSCAPE	/* Use common FSL Layerscape PCIe code */
-#define FSL_PCIE_COMPAT "fsl,ls1021a-pcie"
-
-#define CONFIG_SYS_PCI_64BIT
-
-#define CONFIG_SYS_PCIE_CFG0_PHYS_OFF	0x00000000
-#define CONFIG_SYS_PCIE_CFG0_SIZE	0x00001000	/* 4k */
-#define CONFIG_SYS_PCIE_CFG1_PHYS_OFF	0x00001000
-#define CONFIG_SYS_PCIE_CFG1_SIZE	0x00001000	/* 4k */
-
-#define CONFIG_SYS_PCIE_IO_BUS		0x00000000
-#define CONFIG_SYS_PCIE_IO_PHYS_OFF	0x00010000
-#define CONFIG_SYS_PCIE_IO_SIZE		0x00010000	/* 64k */
-
-#define CONFIG_SYS_PCIE_MEM_BUS		0x08000000
-#define CONFIG_SYS_PCIE_MEM_PHYS_OFF	0x04000000
-#define CONFIG_SYS_PCIE_MEM_SIZE	0x08000000	/* 128M */
 
 #ifdef CONFIG_PCI
 #define CONFIG_PCI_SCAN_SHOW
diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
index 3e70464..47b6ef7 100644
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -11,7 +11,6 @@
 #define CONFIG_FSL_LAYERSCAPE
 #define CONFIG_LS1043A
 #define CONFIG_MP
-#define CONFIG_SYS_FSL_CLK
 #define CONFIG_GICV2
 
 #include <asm/arch/config.h>
@@ -42,7 +41,7 @@
 #define CONFIG_CONS_INDEX		1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
-#define CONFIG_SYS_NS16550_CLK		(get_bus_freq(0))
+#define CONFIG_SYS_NS16550_CLK          (get_serial_clock())
 
 #define CONFIG_BAUDRATE			115200
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
@@ -118,27 +117,9 @@
 #define CONFIG_PCIE1		/* PCIE controller 1 */
 #define CONFIG_PCIE2		/* PCIE controller 2 */
 #define CONFIG_PCIE3		/* PCIE controller 3 */
-#define CONFIG_PCIE_LAYERSCAPE	/* Use common FSL Layerscape PCIe code */
-#define FSL_PCIE_COMPAT "fsl,ls1043a-pcie"
-
-#define CONFIG_SYS_PCI_64BIT
-
-#define CONFIG_SYS_PCIE_CFG0_PHYS_OFF	0x00000000
-#define CONFIG_SYS_PCIE_CFG0_SIZE	0x00001000	/* 4k */
-#define CONFIG_SYS_PCIE_CFG1_PHYS_OFF	0x00001000
-#define CONFIG_SYS_PCIE_CFG1_SIZE	0x00001000	/* 4k */
-
-#define CONFIG_SYS_PCIE_IO_BUS		0x00000000
-#define CONFIG_SYS_PCIE_IO_PHYS_OFF	0x00010000
-#define CONFIG_SYS_PCIE_IO_SIZE		0x00010000	/* 64k */
-
-#define CONFIG_SYS_PCIE_MEM_BUS		0x40000000
-#define CONFIG_SYS_PCIE_MEM_PHYS_OFF	0x40000000
-#define CONFIG_SYS_PCIE_MEM_SIZE	0x40000000	/* 1G */
 
 #ifdef CONFIG_PCI
 #define CONFIG_NET_MULTI
-#define CONFIG_E1000
 #define CONFIG_PCI_SCAN_SHOW
 #define CONFIG_CMD_PCI
 #endif
diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h
index 561a05a..431c8f8 100644
--- a/include/configs/ls1043aqds.h
+++ b/include/configs/ls1043aqds.h
@@ -100,6 +100,10 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_DOS_PARTITION
 #define CONFIG_BOARD_LATE_INIT
 
+#define CONFIG_PARTITION_UUIDS
+#define CONFIG_EFI_PARTITION
+#define CONFIG_CMD_GPT
+
 /* EEPROM */
 #define CONFIG_ID_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_NXID
diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h
index 71c26bd..0054d16 100644
--- a/include/configs/ls1043ardb.h
+++ b/include/configs/ls1043ardb.h
@@ -9,16 +9,6 @@
 
 #include "ls1043a_common.h"
 
-#if defined(CONFIG_FSL_LS_PPA)
-#define CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT
-#define SEC_FIRMWARE_ERET_ADDR_REVERT
-
-#define CONFIG_SYS_LS_PPA_FW_IN_XIP
-#ifdef CONFIG_SYS_LS_PPA_FW_IN_XIP
-#define	CONFIG_SYS_LS_PPA_FW_ADDR	0x60500000
-#endif
-#endif
-
 #if defined(CONFIG_NAND_BOOT) || defined(CONFIG_SD_BOOT)
 #define CONFIG_SYS_TEXT_BASE		0x82000000
 #else
@@ -310,6 +300,10 @@
 #define SCSI_DEV_ID  0x9170
 #define CONFIG_SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID}
 
+#define CONFIG_PARTITION_UUIDS
+#define CONFIG_EFI_PARTITION
+#define CONFIG_CMD_GPT
+
 #include <asm/fsl_secure_boot.h>
 
 #endif /* __LS1043ARDB_H__ */
diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h
index 40e6af8..4a910d1 100644
--- a/include/configs/ls1046a_common.h
+++ b/include/configs/ls1046a_common.h
@@ -10,7 +10,6 @@
 #define CONFIG_REMAKE_ELF
 #define CONFIG_FSL_LAYERSCAPE
 #define CONFIG_MP
-#define CONFIG_SYS_FSL_CLK
 #define CONFIG_GICV2
 
 #include <asm/arch/config.h>
@@ -41,7 +40,7 @@
 #define CONFIG_CONS_INDEX		1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
-#define CONFIG_SYS_NS16550_CLK		(get_bus_freq(0)/2)
+#define CONFIG_SYS_NS16550_CLK          (get_serial_clock())
 
 #define CONFIG_BAUDRATE			115200
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h
index 29e0aa5..3618a06 100644
--- a/include/configs/ls1046aqds.h
+++ b/include/configs/ls1046aqds.h
@@ -143,6 +143,10 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_DOS_PARTITION
 #define CONFIG_BOARD_LATE_INIT
 
+#define CONFIG_PARTITION_UUIDS
+#define CONFIG_EFI_PARTITION
+#define CONFIG_CMD_GPT
+
 /* EEPROM */
 #define CONFIG_ID_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_NXID
diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h
index 2fe8fc1..24843dc 100644
--- a/include/configs/ls1046ardb.h
+++ b/include/configs/ls1046ardb.h
@@ -9,17 +9,6 @@
 
 #include "ls1046a_common.h"
 
-#if defined(CONFIG_FSL_LS_PPA)
-#define CONFIG_ARMV8_PSCI
-#define CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT
-#define CONFIG_SYS_LS_PPA_DRAM_BLOCK_MIN_SIZE		(1UL * 1024 * 1024)
-
-#define CONFIG_SYS_LS_PPA_FW_IN_XIP
-#ifdef CONFIG_SYS_LS_PPA_FW_IN_XIP
-#define	CONFIG_SYS_LS_PPA_FW_ADDR	0x40500000
-#endif
-#endif
-
 #ifdef CONFIG_SD_BOOT
 #define CONFIG_SYS_TEXT_BASE		0x82000000
 #else
@@ -164,6 +153,12 @@
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
 #define I2C_RETIMER_ADDR			0x18
 
+/* PMIC */
+#define CONFIG_POWER
+#ifdef CONFIG_POWER
+#define CONFIG_POWER_I2C
+#endif
+
 /*
  * Environment
  */
@@ -211,6 +206,18 @@
 #define CONFIG_SPI_FLASH_BAR
 #endif
 
+/* USB */
+#define CONFIG_HAS_FSL_XHCI_USB
+#ifdef CONFIG_HAS_FSL_XHCI_USB
+#define CONFIG_USB_XHCI_HCD
+#define CONFIG_USB_XHCI_FSL
+#define CONFIG_USB_XHCI_DWC3
+#define CONFIG_USB_MAX_CONTROLLER_COUNT         3
+#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
+#define CONFIG_CMD_USB
+#define CONFIG_USB_STORAGE
+#endif
+
 /* SATA */
 #define CONFIG_LIBATA
 #define CONFIG_SCSI_AHCI
@@ -225,6 +232,10 @@
 #define CONFIG_SYS_SCSI_MAX_LUN			1
 #define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 						CONFIG_SYS_SCSI_MAX_LUN)
+#define CONFIG_PARTITION_UUIDS
+#define CONFIG_EFI_PARTITION
+#define CONFIG_CMD_GPT
+
 #define CONFIG_BOOTCOMMAND		"sf probe 0:0;sf read $kernel_load" \
 					"$kernel_start $kernel_size;" \
 					"bootm $kernel_load"
diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h
index 2cae966..32d56ae 100644
--- a/include/configs/ls2080a_common.h
+++ b/include/configs/ls2080a_common.h
@@ -97,7 +97,7 @@
 #define CONFIG_CONS_INDEX       1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE     1
-#define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
+#define CONFIG_SYS_NS16550_CLK          (get_serial_clock())
 
 #define CONFIG_BAUDRATE			115200
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
@@ -170,31 +170,6 @@ unsigned long long get_qixis_addr(void);
 #define CONFIG_SYS_MC_RSV_MEM_ALIGN			(512UL * 1024 * 1024)
 #endif
 
-/* PCIe */
-#define CONFIG_PCIE1		/* PCIE controller 1 */
-#define CONFIG_PCIE2		/* PCIE controller 2 */
-#define CONFIG_PCIE3		/* PCIE controller 3 */
-#define CONFIG_PCIE4		/* PCIE controller 4 */
-#define CONFIG_PCIE_LAYERSCAPE	/* Use common FSL Layerscape PCIe code */
-#ifdef CONFIG_LS2080A
-#define FSL_PCIE_COMPAT "fsl,ls2080a-pcie"
-#endif
-
-#define CONFIG_SYS_PCI_64BIT
-
-#define CONFIG_SYS_PCIE_CFG0_PHYS_OFF	0x00000000
-#define CONFIG_SYS_PCIE_CFG0_SIZE	0x00001000	/* 4k */
-#define CONFIG_SYS_PCIE_CFG1_PHYS_OFF	0x00001000
-#define CONFIG_SYS_PCIE_CFG1_SIZE	0x00001000	/* 4k */
-
-#define CONFIG_SYS_PCIE_IO_BUS		0x00000000
-#define CONFIG_SYS_PCIE_IO_PHYS_OFF	0x00010000
-#define CONFIG_SYS_PCIE_IO_SIZE		0x00010000	/* 64k */
-
-#define CONFIG_SYS_PCIE_MEM_BUS		0x40000000
-#define CONFIG_SYS_PCIE_MEM_PHYS_OFF	0x40000000
-#define CONFIG_SYS_PCIE_MEM_SIZE	0x40000000	/* 1G */
-
 /* Command line configuration */
 #define CONFIG_CMD_ENV
 
diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
index 37d5704..e8f2e49 100644
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@@ -14,8 +14,6 @@ unsigned long get_board_sys_clk(void);
 unsigned long get_board_ddr_clk(void);
 #endif
 
-#define CONFIG_SYS_FSL_CLK
-
 #ifdef CONFIG_FSL_QSPI
 #define CONFIG_SYS_NO_FLASH
 #undef CONFIG_CMD_IMLS
@@ -63,6 +61,9 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_SCSI_MAX_LUN			1
 #define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 						CONFIG_SYS_SCSI_MAX_LUN)
+#define CONFIG_PARTITION_UUIDS
+#define CONFIG_EFI_PARTITION
+#define CONFIG_CMD_GPT
 
 /* undefined CONFIG_FSL_DDR_SYNC_REFRESH for simulator */
 
@@ -347,7 +348,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 
 #define CONFIG_FSL_MEMAC
-#define CONFIG_PCIE_LAYERSCAPE	/* Use common FSL Layerscape PCIe code */
 
 #ifdef CONFIG_PCI
 #define CONFIG_PCI_SCAN_SHOW
@@ -364,6 +364,7 @@ unsigned long get_board_ddr_clk(void);
 
 /* Initial environment variables */
 #undef CONFIG_EXTRA_ENV_SETTINGS
+#ifdef CONFIG_SECURE_BOOT
 #define CONFIG_EXTRA_ENV_SETTINGS		\
 	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
 	"loadaddr=0x80100000\0"			\
@@ -375,8 +376,26 @@ unsigned long get_board_ddr_clk(void);
 	"kernel_start=0x581100000\0"		\
 	"kernel_load=0xa0000000\0"		\
 	"kernel_size=0x2800000\0"		\
-	"mcinitcmd=fsl_mc start mc 0x580300000"	\
+	"mcinitcmd=esbc_validate 0x580c80000;"  \
+	"esbc_validate 0x580cc0000;"            \
+	"fsl_mc start mc 0x580300000"           \
 	" 0x580800000 \0"
+#else
+#define CONFIG_EXTRA_ENV_SETTINGS		\
+	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
+	"loadaddr=0x80100000\0"			\
+	"kernel_addr=0x100000\0"		\
+	"ramdisk_addr=0x800000\0"		\
+	"ramdisk_size=0x2000000\0"		\
+	"fdt_high=0xa0000000\0"			\
+	"initrd_high=0xffffffffffffffff\0"	\
+	"kernel_start=0x581100000\0"		\
+	"kernel_load=0xa0000000\0"		\
+	"kernel_size=0x2800000\0"		\
+	"mcinitcmd=fsl_mc start mc 0x580300000" \
+	" 0x580800000 \0"
+#endif /* CONFIG_SECURE_BOOT */
+
 
 #ifdef CONFIG_FSL_MC_ENET
 #define CONFIG_FSL_MEMAC
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index 713e86b..bbcbd66 100644
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -32,7 +32,6 @@
 unsigned long get_board_sys_clk(void);
 #endif
 
-#define CONFIG_SYS_FSL_CLK
 #define CONFIG_SYS_CLK_FREQ		get_board_sys_clk()
 #define CONFIG_DDR_CLK_FREQ		133333333
 #define COUNTER_FREQUENCY_REAL		(CONFIG_SYS_CLK_FREQ/4)
@@ -71,6 +70,9 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_SCSI_MAX_LUN			1
 #define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 						CONFIG_SYS_SCSI_MAX_LUN)
+#define CONFIG_PARTITION_UUIDS
+#define CONFIG_EFI_PARTITION
+#define CONFIG_CMD_GPT
 
 /* undefined CONFIG_FSL_DDR_SYNC_REFRESH for simulator */
 
@@ -291,7 +293,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 
 #define CONFIG_FSL_MEMAC
-#define CONFIG_PCIE_LAYERSCAPE	/* Use common FSL Layerscape PCIe code */
 
 #ifdef CONFIG_PCI
 #define CONFIG_PCI_SCAN_SHOW
@@ -328,6 +329,7 @@ unsigned long get_board_sys_clk(void);
 
 /* Initial environment variables */
 #undef CONFIG_EXTRA_ENV_SETTINGS
+#ifdef CONFIG_SECURE_BOOT
 #define CONFIG_EXTRA_ENV_SETTINGS		\
 	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
 	"scriptaddr=0x80800000\0"		\
@@ -345,9 +347,34 @@ unsigned long get_board_sys_clk(void);
 	"kernel_load=0xa0000000\0"		\
 	"kernel_size=0x2800000\0"		\
 	"fdtfile=fsl-ls2080a-rdb.dtb\0"		\
-	"mcinitcmd=fsl_mc start mc 0x580300000"	\
-	" 0x580800000 \0"			\
+	"mcinitcmd=esbc_validate 0x580c80000;"  \
+	"esbc_validate 0x580cc0000;"            \
+	"fsl_mc start mc 0x580300000"           \
+	" 0x580800000 \0"                       \
 	BOOTENV
+#else
+#define CONFIG_EXTRA_ENV_SETTINGS		\
+	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
+	"scriptaddr=0x80800000\0"		\
+	"kernel_addr_r=0x81000000\0"		\
+	"pxefile_addr_r=0x81000000\0"		\
+	"fdt_addr_r=0x88000000\0"		\
+	"ramdisk_addr_r=0x89000000\0"		\
+	"loadaddr=0x80100000\0"			\
+	"kernel_addr=0x100000\0"		\
+	"ramdisk_addr=0x800000\0"		\
+	"ramdisk_size=0x2000000\0"		\
+	"fdt_high=0xa0000000\0"			\
+	"initrd_high=0xffffffffffffffff\0"	\
+	"kernel_start=0x581100000\0"		\
+	"kernel_load=0xa0000000\0"		\
+	"kernel_size=0x2800000\0"		\
+	"fdtfile=fsl-ls2080a-rdb.dtb\0"		\
+	"mcinitcmd=fsl_mc start mc 0x580300000" \
+	" 0x580800000 \0"                       \
+	BOOTENV
+#endif
+
 
 #undef CONFIG_BOOTARGS
 #define CONFIG_BOOTARGS		"console=ttyS1,115200 root=/dev/ram0 " \
diff --git a/include/fsl_ddr_sdram.h b/include/fsl_ddr_sdram.h
index 1404c57..b8de46b 100644
--- a/include/fsl_ddr_sdram.h
+++ b/include/fsl_ddr_sdram.h
@@ -173,6 +173,7 @@ typedef struct ddr4_spd_eeprom_s generic_spd_eeprom_t;
 
 /* DDR_CDR1 */
 #define DDR_CDR1_DHC_EN	0x80000000
+#define DDR_CDR1_V0PT9_EN	0x40000000
 #define DDR_CDR1_ODT_SHIFT	17
 #define DDR_CDR1_ODT_MASK	0x6
 #define DDR_CDR2_ODT_MASK	0x1
diff --git a/include/linux/usb/xhci-fsl.h b/include/linux/usb/xhci-fsl.h
index 15cac40..1fa3161 100644
--- a/include/linux/usb/xhci-fsl.h
+++ b/include/linux/usb/xhci-fsl.h
@@ -62,7 +62,7 @@ struct fsl_xhci {
 #define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_XHCI_USB1_ADDR
 #define CONFIG_SYS_FSL_XHCI_USB2_ADDR CONFIG_SYS_XHCI_USB2_ADDR
 #define CONFIG_SYS_FSL_XHCI_USB3_ADDR 0
-#elif defined(CONFIG_LS1043A)
+#elif defined(CONFIG_LS1043A) || defined(CONFIG_ARCH_LS1046A)
 #define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_XHCI_USB1_ADDR
 #define CONFIG_SYS_FSL_XHCI_USB2_ADDR CONFIG_SYS_XHCI_USB2_ADDR
 #define CONFIG_SYS_FSL_XHCI_USB3_ADDR CONFIG_SYS_XHCI_USB3_ADDR
diff --git a/include/power/mc34vr500_pmic.h b/include/power/mc34vr500_pmic.h
new file mode 100644
index 0000000..b0b143a
--- /dev/null
+++ b/include/power/mc34vr500_pmic.h
@@ -0,0 +1,175 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Hou Zhiqiang <Zhiqiang.Hou@freescale.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __MC34VR500_H_
+#define __MC34VR500_H_
+
+#include <power/pmic.h>
+
+#define MC34VR500_I2C_ADDR	0x08
+
+/* Drivers name */
+#define MC34VR500_REGULATOR_DRIVER	"mc34vr500_regulator"
+
+/* Register map */
+enum {
+	MC34VR500_DEVICEID		= 0x00,
+
+	MC34VR500_SILICONREVID		= 0x03,
+	MC34VR500_FABID,
+	MC34VR500_INTSTAT0,
+	MC34VR500_INTMASK0,
+	MC34VR500_INTSENSE0,
+	MC34VR500_INTSTAT1,
+	MC34VR500_INTMASK1,
+	MC34VR500_INTSENSE1,
+
+	MC34VR500_INTSTAT4		= 0x11,
+	MC34VR500_INTMASK4,
+	MC34VR500_INTSENSE4,
+
+	MC34VR500_PWRCTL		= 0x1B,
+
+	MC34VR500_SW1VOLT		= 0x2E,
+	MC34VR500_SW1STBY,
+	MC34VR500_SW1OFF,
+	MC34VR500_SW1MODE,
+	MC34VR500_SW1CONF,
+	MC34VR500_SW2VOLT,
+	MC34VR500_SW2STBY,
+	MC34VR500_SW2OFF,
+	MC34VR500_SW2MODE,
+	MC34VR500_SW2CONF,
+
+	MC34VR500_SW3VOLT		= 0x3C,
+	MC34VR500_SW3STBY,
+	MC34VR500_SW3OFF,
+	MC34VR500_SW3MODE,
+	MC34VR500_SW3CONF,
+
+	MC34VR500_SW4VOLT		= 0x4A,
+	MC34VR500_SW4STBY,
+	MC34VR500_SW4OFF,
+	MC34VR500_SW4MODE,
+	MC34VR500_SW4CONF,
+
+	MC34VR500_REFOUTCRTRL		= 0x6A,
+
+	MC34VR500_LDO1CTL		= 0x6D,
+	MC34VR500_LDO2CTL,
+	MC34VR500_LDO3CTL,
+	MC34VR500_LDO4CTL,
+	MC34VR500_LDO5CTL,
+
+	MC34VR500_PAGE_REGISTER		= 0x7F,
+
+	/* Internal RAM */
+	MC34VR500_SW1_VOLT		= 0xA8,
+	MC34VR500_SW1_SEQ,
+	MC34VR500_SW1_CONFIG,
+
+	MC34VR500_SW2_VOLT		= 0xAC,
+	MC34VR500_SW2_SEQ,
+	MC34VR500_SW2_CONFIG,
+
+	MC34VR500_SW3_VOLT		= 0xB0,
+	MC34VR500_SW3_SEQ,
+	MC34VR500_SW3_CONFIG,
+
+	MC34VR500_SW4_VOLT		= 0xB8,
+	MC34VR500_SW4_SEQ,
+	MC34VR500_SW4_CONFIG,
+
+	MC34VR500_REFOUT_SEQ		= 0xC4,
+
+	MC34VR500_LDO1_VOLT		= 0xCC,
+	MC34VR500_LDO1_SEQ,
+
+	MC34VR500_LDO2_VOLT		= 0xD0,
+	MC34VR500_LDO2_SEQ,
+
+	MC34VR500_LDO3_VOLT		= 0xD4,
+	MC34VR500_LDO3_SEQ,
+
+	MC34VR500_LDO4_VOLT		= 0xD8,
+	MC34VR500_LDO4_SEQ,
+
+	MC34VR500_LDO5_VOLT		= 0xDC,
+	MC34VR500_LDO5_SEQ,
+
+	MC34VR500_PU_CONFIG1		= 0xE0,
+
+	MC34VR500_TBB_POR		= 0xE4,
+
+	MC34VR500_PWRGD_EN		= 0xE8,
+
+	MC34VR500_NUM_OF_REGS,
+};
+
+/* Registor offset based on SWxVOLT register */
+#define MC34VR500_VOLT_OFFSET	0
+#define MC34VR500_STBY_OFFSET	1
+#define MC34VR500_OFF_OFFSET	2
+#define MC34VR500_MODE_OFFSET	3
+#define MC34VR500_CONF_OFFSET	4
+
+#define SW_MODE_MASK	0xf
+#define SW_MODE_SHIFT	0
+
+#define LDO_VOL_MASK	0xf
+#define LDO_EN		(1 << 4)
+#define LDO_MODE_SHIFT	4
+#define LDO_MODE_MASK	(1 << 4)
+#define LDO_MODE_OFF	0
+#define LDO_MODE_ON	1
+
+#define REFOUTEN	(1 << 4)
+
+/*
+ * Regulator Mode Control
+ *
+ * OFF: The regulator is switched off and the output voltage is discharged.
+ * PFM: In this mode, the regulator is always in PFM mode, which is useful
+ *      at light loads for optimized efficiency.
+ * PWM: In this mode, the regulator is always in PWM mode operation
+ *	regardless of load conditions.
+ * APS: In this mode, the regulator moves automatically between pulse
+ *	skipping mode and PWM mode depending on load conditions.
+ *
+ * SWxMODE[3:0]
+ * Normal Mode  |  Standby Mode	|      value
+ *   OFF		OFF		0x0
+ *   PWM		OFF		0x1
+ *   PFM		OFF		0x3
+ *   APS		OFF		0x4
+ *   PWM		PWM		0x5
+ *   PWM		APS		0x6
+ *   APS		APS		0x8
+ *   APS		PFM		0xc
+ *   PWM		PFM		0xd
+ */
+#define OFF_OFF		0x0
+#define PWM_OFF		0x1
+#define PFM_OFF		0x3
+#define APS_OFF		0x4
+#define PWM_PWM		0x5
+#define PWM_APS		0x6
+#define APS_APS		0x8
+#define APS_PFM		0xc
+#define PWM_PFM		0xd
+
+enum swx {
+	SW1 = 0,
+	SW2,
+	SW3,
+	SW4,
+};
+
+int mc34vr500_get_sw_volt(uint8_t sw);
+int mc34vr500_set_sw_volt(uint8_t sw, int sw_volt);
+int power_mc34vr500_init(unsigned char bus);
+#endif /* __MC34VR500_PMIC_H_ */