summaryrefslogtreecommitdiff
path: root/nand_spl
diff options
context:
space:
mode:
authorJohn Rigby <jcrigby@gmail.com>2010-01-27 02:24:17 (GMT)
committerScott Wood <scottwood@freescale.com>2010-01-27 20:22:41 (GMT)
commitf3bb63a304c4e76010a2a4e99da61f7b6ffffc77 (patch)
treefba1d9dba27647d73a756ca0cbf88bb4f8edaa8f /nand_spl
parentef22b50370f7b6d8deba9e9e64d2cb13c542b647 (diff)
downloadu-boot-f3bb63a304c4e76010a2a4e99da61f7b6ffffc77.tar.xz
Add MX25 support to nand_spl fsl nfc driver
MX25 has a different version of the fsl_nfc flash controller known as version 1.1. Add support to the nand_spl fsl_nfc driver Versioning differs from mainline mxc kernel driver no consensus yet on if the naming here and in Redboot or the kernel is "correct". Signed-off-by: John Rigby <jcrigby@gmail.com> Signed-off-by: Wolfgang Denk <wd@denx.de> CC: Scott Wood <scottwood@freescale.com>
Diffstat (limited to 'nand_spl')
-rw-r--r--nand_spl/nand_boot_fsl_nfc.c72
1 files changed, 57 insertions, 15 deletions
diff --git a/nand_spl/nand_boot_fsl_nfc.c b/nand_spl/nand_boot_fsl_nfc.c
index a9df2a8..f4040a7 100644
--- a/nand_spl/nand_boot_fsl_nfc.c
+++ b/nand_spl/nand_boot_fsl_nfc.c
@@ -26,11 +26,15 @@
#include <common.h>
#include <nand.h>
+#ifdef CONFIG_MX31
#include <asm-arm/arch/mx31-regs.h>
+#else
+#include <asm-arm/arch/imx-regs.h>
+#endif
#include <asm/io.h>
#include <fsl_nfc.h>
-static struct fsl_nfc_regs *nfc;
+struct fsl_nfc_regs *nfc;
static void nfc_wait_ready(void)
{
@@ -45,13 +49,35 @@ static void nfc_wait_ready(void)
writew(tmp, &nfc->nand_flash_config2);
}
-static void nfc_nand_init(void)
+void nfc_nand_init(void)
{
+#if defined(MXC_NFC_V1_1)
+ int ecc_per_page = CONFIG_SYS_NAND_PAGE_SIZE / 512;
+ int config1;
+
+ writew(CONFIG_SYS_NAND_SPARE_SIZE / 2, &nfc->spare_area_size);
+
+ /* unlocking RAM Buff */
+ writew(0x2, &nfc->configuration);
+
+ /* hardware ECC checking and correct */
+ config1 = readw(&nfc->nand_flash_config1) | NFC_ECC_EN | 0x800;
+ /*
+ * if spare size is larger that 16 bytes per 512 byte hunk
+ * then use 8 symbol correction instead of 4
+ */
+ if ((CONFIG_SYS_NAND_SPARE_SIZE / ecc_per_page) > 16)
+ config1 &= ~NFC_4_8N_ECC;
+ else
+ config1 |= NFC_4_8N_ECC;
+ writew(config1, &nfc->nand_flash_config1);
+#elif defined(MXC_NFC_V1)
/* unlocking RAM Buff */
writew(0x2, &nfc->configuration);
/* hardware ECC checking and correct */
writew(NFC_ECC_EN, &nfc->nand_flash_config1);
+#endif
}
static void nfc_nand_command(unsigned short command)
@@ -65,12 +91,12 @@ static void nfc_nand_page_address(unsigned int page_address)
{
unsigned int page_count;
- writew(0x00, &nfc->flash_cmd);
+ writew(0x00, &nfc->flash_add);
writew(NFC_ADDR, &nfc->nand_flash_config2);
nfc_wait_ready();
- /* code only for 2kb flash */
- if (CONFIG_SYS_NAND_PAGE_SIZE == 0x800) {
+ /* code only for large page flash */
+ if (CONFIG_SYS_NAND_PAGE_SIZE > 512) {
writew(0x00, &nfc->flash_add);
writew(NFC_ADDR, &nfc->nand_flash_config2);
nfc_wait_ready();
@@ -88,22 +114,38 @@ static void nfc_nand_page_address(unsigned int page_address)
page_count = page_count >> 8;
} while (page_count);
}
+
+ writew(0x00, &nfc->flash_add);
+ writew(NFC_ADDR, &nfc->nand_flash_config2);
+ nfc_wait_ready();
}
static void nfc_nand_data_output(void)
{
+ int config1 = readw(&nfc->nand_flash_config1);
+#ifdef NAND_MXC_2K_MULTI_CYCLE
int i;
+#endif
+ config1 |= NFC_ECC_EN | NFC_INT_MSK;
+ writew(config1, &nfc->nand_flash_config1);
+ writew(0, &nfc->buffer_address);
+ writew(NFC_OUTPUT, &nfc->nand_flash_config2);
+ nfc_wait_ready();
+#ifdef NAND_MXC_2K_MULTI_CYCLE
/*
- * The NAND controller requires four output commands for
- * large page devices.
+ * This NAND controller requires multiple input commands
+ * for pages larger than 512 bytes.
*/
- for (i = 0; i < (CONFIG_SYS_NAND_PAGE_SIZE / 512); i++) {
- writew(NFC_ECC_EN, &nfc->nand_flash_config1);
- writew(i, &nfc->buffer_address); /* read in i:th buffer */
+ for (i = 1; i < (CONFIG_SYS_NAND_PAGE_SIZE / 512); i++) {
+ config1 = readw(&nfc->nand_flash_config1);
+ config1 |= NFC_ECC_EN | NFC_INT_MSK;
+ writew(config1, &nfc->nand_flash_config1);
+ writew(i, &nfc->buffer_address);
writew(NFC_OUTPUT, &nfc->nand_flash_config2);
nfc_wait_ready();
}
+#endif
}
static int nfc_nand_check_ecc(void)
@@ -121,7 +163,7 @@ static int nfc_read_page(unsigned int page_address, unsigned char *buf)
nfc_nand_command(NAND_CMD_READ0);
nfc_nand_page_address(page_address);
- if (CONFIG_SYS_NAND_PAGE_SIZE == 0x800)
+ if (CONFIG_SYS_NAND_PAGE_SIZE > 512)
nfc_nand_command(NAND_CMD_READSTART);
nfc_nand_data_output(); /* fill the main buffer 0 */
@@ -129,7 +171,7 @@ static int nfc_read_page(unsigned int page_address, unsigned char *buf)
if (nfc_nand_check_ecc())
return -1;
- src = &nfc->main_area0[0];
+ src = &nfc->main_area[0][0];
dst = (u32 *)buf;
/* main copy loop from NAND-buffer to SDRAM memory */
@@ -154,12 +196,12 @@ static int is_badblock(int pagenumber)
nfc_nand_command(NAND_CMD_READ0);
nfc_nand_page_address(page);
- if (CONFIG_SYS_NAND_PAGE_SIZE == 0x800)
+ if (CONFIG_SYS_NAND_PAGE_SIZE > 512)
nfc_nand_command(NAND_CMD_READSTART);
nfc_nand_data_output(); /* fill the main buffer 0 */
- src = &nfc->spare_area0[0];
+ src = &nfc->spare_area[0][0];
/*
* IMPORTANT NOTE: The nand flash controller uses a non-
@@ -209,7 +251,7 @@ static int nand_load(unsigned int from, unsigned int size, unsigned char *buf)
if (!(page % CONFIG_SYS_NAND_PAGE_COUNT)) {
/*
* Yes, new block. See if this block is good. If not,
- * loop until we find i good block.
+ * loop until we find a good block.
*/
while (is_badblock(page)) {
page = page + CONFIG_SYS_NAND_PAGE_COUNT;