summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--MAINTAINERS3
-rwxr-xr-xMAKEALL18
-rw-r--r--Makefile3
-rw-r--r--arch/arm/cpu/arm1136/start.S23
-rw-r--r--arch/arm/cpu/arm1176/start.S23
-rw-r--r--arch/arm/cpu/arm720t/start.S23
-rw-r--r--arch/arm/cpu/arm920t/at91/reset.c8
-rw-r--r--arch/arm/cpu/arm920t/at91/timer.c29
-rw-r--r--arch/arm/cpu/arm920t/start.S23
-rw-r--r--arch/arm/cpu/arm925t/start.S23
-rw-r--r--arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c5
-rw-r--r--arch/arm/cpu/arm926ejs/davinci/timer.c77
-rw-r--r--arch/arm/cpu/arm926ejs/mx25/generic.c12
-rw-r--r--arch/arm/cpu/arm926ejs/mx27/generic.c12
-rw-r--r--arch/arm/cpu/arm926ejs/start.S23
-rw-r--r--arch/arm/cpu/arm946es/start.S23
-rw-r--r--arch/arm/cpu/arm_intcm/start.S23
-rw-r--r--arch/arm/cpu/armv7/mx5/soc.c14
-rw-r--r--arch/arm/cpu/armv7/omap-common/timer.c22
-rw-r--r--arch/arm/cpu/armv7/omap3/emif4.c8
-rw-r--r--arch/arm/cpu/armv7/omap3/sdrc.c3
-rw-r--r--arch/arm/cpu/armv7/s5p-common/timer.c18
-rw-r--r--arch/arm/cpu/armv7/start.S27
-rw-r--r--arch/arm/cpu/armv7/syslib.c1
-rw-r--r--arch/arm/cpu/ixp/start.S23
-rw-r--r--arch/arm/cpu/lh7a40x/start.S23
-rw-r--r--arch/arm/cpu/pxa/start.S23
-rw-r--r--arch/arm/cpu/s3c44b0/start.S23
-rw-r--r--arch/arm/cpu/sa1100/start.S23
-rw-r--r--arch/arm/include/asm/arch-mx25/imx-regs.h19
-rw-r--r--arch/arm/include/asm/arch-mx27/imx-regs.h20
-rw-r--r--arch/arm/include/asm/arch-mx5/imx-regs.h34
-rw-r--r--arch/arm/include/asm/global_data.h5
-rw-r--r--arch/arm/lib/board.c2
-rw-r--r--arch/powerpc/cpu/mpc83xx/pcie.c12
-rw-r--r--arch/powerpc/cpu/mpc83xx/start.S8
-rw-r--r--arch/powerpc/cpu/mpc85xx/cpu_init.c2
-rw-r--r--arch/powerpc/lib/board.c11
-rw-r--r--arch/sh/cpu/sh2/start.S8
-rw-r--r--arch/sh/cpu/sh3/start.S8
-rw-r--r--arch/sh/cpu/sh4/start.S10
-rw-r--r--board/amcc/acadia/u-boot-nand.lds49
-rw-r--r--board/amcc/kilauea/u-boot-nand.lds49
-rw-r--r--board/armltd/vexpress/ca9x4_ct_vxp.c11
-rw-r--r--board/armltd/vexpress/config.mk3
-rw-r--r--board/armltd/vexpress/u-boot.lds65
-rw-r--r--board/atmel/at91rm9200ek/config.mk2
-rw-r--r--board/emk/top9000/Makefile54
-rw-r--r--board/emk/top9000/spi.c61
-rw-r--r--board/emk/top9000/top9000.c290
-rw-r--r--board/freescale/common/Makefile1
-rw-r--r--board/freescale/mpc8641hpcn/mpc8641hpcn.c3
-rw-r--r--board/freescale/p1022ds/diu.c67
-rw-r--r--board/freescale/p2020ds/p2020ds.c3
-rw-r--r--board/logicpd/am3517evm/config.mk2
-rw-r--r--board/logicpd/zoom1/config.mk2
-rw-r--r--board/logicpd/zoom2/config.mk2
-rw-r--r--board/ronetix/pm9261/config.mk1
-rw-r--r--board/ronetix/pm9261/pm9261.c9
-rw-r--r--board/ronetix/pm9263/config.mk1
-rw-r--r--board/ronetix/pm9263/pm9263.c9
-rw-r--r--board/ronetix/pm9g45/config.mk1
-rw-r--r--board/ronetix/pm9g45/pm9g45.c9
-rw-r--r--board/samsung/goni/goni.c10
-rw-r--r--board/samsung/smdkc100/smdkc100.c10
-rw-r--r--board/ti/sdp3430/config.mk2
-rw-r--r--boards.cfg11
-rw-r--r--common/cmd_onenand.c4
-rw-r--r--common/cmd_ubi.c15
-rw-r--r--common/cmd_ubifs.c47
-rw-r--r--common/env_nand.c2
-rw-r--r--common/hwconfig.c27
-rw-r--r--drivers/mmc/fsl_esdhc.c8
-rw-r--r--drivers/mmc/gen_atmel_mci.c1
-rw-r--r--drivers/mtd/nand/fsl_upm.c2
-rw-r--r--drivers/mtd/nand/s3c2410_nand.c12
-rw-r--r--drivers/net/fec_mxc.c17
-rw-r--r--drivers/net/tsec.c9
-rw-r--r--drivers/video/Makefile1
-rw-r--r--drivers/video/fsl_diu_fb.c (renamed from board/freescale/common/fsl_diu_fb.c)0
-rw-r--r--fs/ubifs/super.c2
-rw-r--r--fs/ubifs/ubifs.c73
-rw-r--r--include/configs/MPC8360EMDS.h4
-rw-r--r--include/configs/MPC8536DS.h5
-rw-r--r--include/configs/MPC8569MDS.h3
-rw-r--r--include/configs/MPC8572DS.h1
-rw-r--r--include/configs/P1_P2_RDB.h13
-rw-r--r--include/configs/am3517_evm.h7
-rw-r--r--include/configs/aria.h1
-rw-r--r--include/configs/at91rm9200ek.h18
-rw-r--r--include/configs/atngw100.h2
-rw-r--r--include/configs/davinci_dvevm.h19
-rw-r--r--include/configs/igep0030.h1
-rw-r--r--include/configs/mimc200.h2
-rw-r--r--include/configs/mx51evk.h7
-rw-r--r--include/configs/omap3_evm.h6
-rw-r--r--include/configs/omap3_sdp3430.h6
-rw-r--r--include/configs/omap3_zoom1.h6
-rw-r--r--include/configs/omap3_zoom2.h6
-rw-r--r--include/configs/omap4_sdp4430.h1
-rw-r--r--include/configs/pm9261.h7
-rw-r--r--include/configs/pm9263.h7
-rw-r--r--include/configs/pm9g45.h7
-rw-r--r--include/configs/r7780mp.h1
-rw-r--r--include/configs/s5p_goni.h2
-rw-r--r--include/configs/smdkc100.h2
-rw-r--r--include/configs/top9000.h314
-rw-r--r--include/configs/xpedite537x.h10
-rw-r--r--include/configs/xpedite550x.h10
-rw-r--r--include/linux/mii.h181
-rw-r--r--include/pci_ids.h1
-rw-r--r--include/post.h6
112 files changed, 1638 insertions, 663 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index fc6bae9..ba87436 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -310,10 +310,11 @@ Tirumala Marri <tmarri@apm.com>
bluestone APM821XX
-Reinhard Meyer <r.meyer@emk-elektronik.de>
+Reinhard Meyer <reinhard.meyer@emk-elektronik.de>
TOP860 MPC860T
TOP5200 MPC5200
+ TOP9000 ARM926EJS (AT91SAM9xxx SoC)
Tolunay Orkun <torkun@nextio.com>
diff --git a/MAKEALL b/MAKEALL
index 767d561..4254565 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -187,6 +187,7 @@ boards_by_field()
}
boards_by_arch() { boards_by_field 2 "$@" ; }
boards_by_cpu() { boards_by_field 3 "$@" ; }
+boards_by_soc() { boards_by_field 6 "$@" ; }
#########################################################################
## MPC5xx Systems
@@ -439,11 +440,8 @@ LIST_ARMV7=" \
## AT91 Systems
#########################################################################
-LIST_at91=" \
- afeb9260 \
- at91cap9adk \
- at91rm9200dk \
- at91rm9200ek \
+LIST_at91="$(boards_by_soc at91)\
+ $(boards_by_soc at91rm9200)\
at91sam9260ek \
at91sam9261ek \
at91sam9263ek \
@@ -451,19 +449,9 @@ LIST_at91=" \
at91sam9g20ek \
at91sam9m10g45ek \
at91sam9rlek \
- cmc_pu2 \
CPUAT91 \
CPU9260 \
CPU9G20 \
- csb637 \
- eb_cpux9k2 \
- kb9202 \
- meesc \
- mp2usb \
- m501sk \
- otc570 \
- pm9261 \
- pm9263 \
pm9g45 \
SBC35_A9G20 \
TNY_A9260 \
diff --git a/Makefile b/Makefile
index 87a383d..0685ef9 100644
--- a/Makefile
+++ b/Makefile
@@ -185,9 +185,6 @@ LIBS += lib/lzma/liblzma.o
LIBS += lib/lzo/liblzo.o
LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \
"board/$(VENDOR)/common/lib$(VENDOR).o"; fi)
-ifdef CONFIG_FSL_DIU_FB
-LIBS += board/freescale/common/libfreescale.o
-endif
LIBS += $(CPUDIR)/lib$(CPU).o
ifdef SOC
LIBS += $(CPUDIR)/$(SOC)/lib$(SOC).o
diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S
index eec8bee..9a6f6cb 100644
--- a/arch/arm/cpu/arm1136/start.S
+++ b/arch/arm/cpu/arm1136/start.S
@@ -160,6 +160,7 @@ next:
/* Set stackpointer in internal RAM to call board_init_f */
call_board_init_f:
ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
+ bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
ldr r0,=0x00000000
#ifdef CONFIG_NAND_SPL
@@ -186,22 +187,22 @@ relocate_code:
mov r4, r0 /* save addr_sp */
mov r5, r1 /* save addr of gd */
mov r6, r2 /* save addr of destination */
- mov r7, r2 /* save addr of destination */
/* Set up the stack */
stack_setup:
mov sp, r4
adr r0, _start
+ cmp r0, r6
+ beq clear_bss /* skip relocation */
+ mov r1, r6 /* r1 <- scratch for copy_loop */
ldr r2, _TEXT_BASE
ldr r3, _bss_start_ofs
add r2, r0, r3 /* r2 <- source end address */
- cmp r0, r6
- beq clear_bss
copy_loop:
ldmia r0!, {r9-r10} /* copy from source address [r0] */
- stmia r6!, {r9-r10} /* copy to target address [r1] */
+ stmia r1!, {r9-r10} /* copy to target address [r1] */
cmp r0, r2 /* until source end address [r2] */
blo copy_loop
@@ -210,7 +211,7 @@ copy_loop:
* fix .rel.dyn relocations
*/
ldr r0, _TEXT_BASE /* r0 <- Text base */
- sub r9, r7, r0 /* r9 <- relocation offset */
+ sub r9, r6, r0 /* r9 <- relocation offset */
ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
add r10, r10, r0 /* r10 <- sym table in FLASH */
ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
@@ -221,10 +222,10 @@ fixloop:
ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
add r0, r0, r9 /* r0 <- location to fix up in RAM */
ldr r1, [r2, #4]
- and r8, r1, #0xff
- cmp r8, #23 /* relative fixup? */
+ and r7, r1, #0xff
+ cmp r7, #23 /* relative fixup? */
beq fixrel
- cmp r8, #2 /* absolute fixup? */
+ cmp r7, #2 /* absolute fixup? */
beq fixabs
/* ignore unknown type of fixup */
b fixnext
@@ -233,7 +234,7 @@ fixabs:
mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
add r1, r10, r1 /* r1 <- address of symbol in table */
ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r9 /* r1 <- relocated sym addr */
+ add r1, r1, r9 /* r1 <- relocated sym addr */
b fixnext
fixrel:
/* relative fix: increase location by offset */
@@ -251,7 +252,7 @@ clear_bss:
ldr r0, _bss_start_ofs
ldr r1, _bss_end_ofs
ldr r3, _TEXT_BASE /* Text base */
- mov r4, r7 /* reloc addr */
+ mov r4, r6 /* reloc addr */
add r0, r0, r4
add r1, r1, r4
mov r2, #0x00000000 /* clear */
@@ -280,7 +281,7 @@ jump_2_ram:
add lr, lr, r9
/* setup parameters for board_init_r */
mov r0, r5 /* gd_t */
- mov r1, r7 /* dest_addr */
+ mov r1, r6 /* dest_addr */
/* jump to it ... */
mov pc, lr
diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S
index cd8f016..237dcfe 100644
--- a/arch/arm/cpu/arm1176/start.S
+++ b/arch/arm/cpu/arm1176/start.S
@@ -223,6 +223,7 @@ skip_tcmdisable:
/* Set stackpointer in internal RAM to call board_init_f */
call_board_init_f:
ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
+ bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
ldr r0,=0x00000000
bl board_init_f
@@ -240,22 +241,22 @@ relocate_code:
mov r4, r0 /* save addr_sp */
mov r5, r1 /* save addr of gd */
mov r6, r2 /* save addr of destination */
- mov r7, r2 /* save addr of destination */
/* Set up the stack */
stack_setup:
mov sp, r4
adr r0, _start
+ cmp r0, r6
+ beq clear_bss /* skip relocation */
+ mov r1, r6 /* r1 <- scratch for copy_loop */
ldr r2, _TEXT_BASE
ldr r3, _bss_start_ofs
add r2, r0, r3 /* r2 <- source end address */
- cmp r0, r6
- beq clear_bss
copy_loop:
ldmia r0!, {r9-r10} /* copy from source address [r0] */
- stmia r6!, {r9-r10} /* copy to target address [r1] */
+ stmia r1!, {r9-r10} /* copy to target address [r1] */
cmp r0, r2 /* until source end address [r2] */
blo copy_loop
@@ -264,7 +265,7 @@ copy_loop:
* fix .rel.dyn relocations
*/
ldr r0, _TEXT_BASE /* r0 <- Text base */
- sub r9, r7, r0 /* r9 <- relocation offset */
+ sub r9, r6, r0 /* r9 <- relocation offset */
ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
add r10, r10, r0 /* r10 <- sym table in FLASH */
ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
@@ -275,10 +276,10 @@ fixloop:
ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
add r0, r0, r9 /* r0 <- location to fix up in RAM */
ldr r1, [r2, #4]
- and r8, r1, #0xff
- cmp r8, #23 /* relative fixup? */
+ and r7, r1, #0xff
+ cmp r7, #23 /* relative fixup? */
beq fixrel
- cmp r8, #2 /* absolute fixup? */
+ cmp r7, #2 /* absolute fixup? */
beq fixabs
/* ignore unknown type of fixup */
b fixnext
@@ -287,7 +288,7 @@ fixabs:
mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
add r1, r10, r1 /* r1 <- address of symbol in table */
ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r9 /* r1 <- relocated sym addr */
+ add r1, r1, r9 /* r1 <- relocated sym addr */
b fixnext
fixrel:
/* relative fix: increase location by offset */
@@ -343,7 +344,7 @@ clear_bss:
ldr r0, _bss_start_ofs
ldr r1, _bss_end_ofs
ldr r3, _TEXT_BASE /* Text base */
- mov r4, r7 /* reloc addr */
+ mov r4, r6 /* reloc addr */
add r0, r0, r4
add r1, r1, r4
mov r2, #0x00000000 /* clear */
@@ -372,7 +373,7 @@ _nand_boot: .word nand_boot
add lr, lr, r9
/* setup parameters for board_init_r */
mov r0, r5 /* gd_t */
- mov r1, r7 /* dest_addr */
+ mov r1, r6 /* dest_addr */
/* jump to it ... */
mov pc, lr
diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S
index 46050da..abfa124 100644
--- a/arch/arm/cpu/arm720t/start.S
+++ b/arch/arm/cpu/arm720t/start.S
@@ -138,6 +138,7 @@ reset:
/* Set stackpointer in internal RAM to call board_init_f */
call_board_init_f:
ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
+ bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
ldr r0,=0x00000000
bl board_init_f
@@ -155,22 +156,22 @@ relocate_code:
mov r4, r0 /* save addr_sp */
mov r5, r1 /* save addr of gd */
mov r6, r2 /* save addr of destination */
- mov r7, r2 /* save addr of destination */
/* Set up the stack */
stack_setup:
mov sp, r4
adr r0, _start
+ cmp r0, r6
+ beq clear_bss /* skip relocation */
+ mov r1, r6 /* r1 <- scratch for copy_loop */
ldr r2, _TEXT_BASE
ldr r3, _bss_start_ofs
add r2, r0, r3 /* r2 <- source end address */
- cmp r0, r6
- beq clear_bss
copy_loop:
ldmia r0!, {r9-r10} /* copy from source address [r0] */
- stmia r6!, {r9-r10} /* copy to target address [r1] */
+ stmia r1!, {r9-r10} /* copy to target address [r1] */
cmp r0, r2 /* until source end address [r2] */
blo copy_loop
@@ -179,7 +180,7 @@ copy_loop:
* fix .rel.dyn relocations
*/
ldr r0, _TEXT_BASE /* r0 <- Text base */
- sub r9, r7, r0 /* r9 <- relocation offset */
+ sub r9, r6, r0 /* r9 <- relocation offset */
ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
add r10, r10, r0 /* r10 <- sym table in FLASH */
ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
@@ -190,10 +191,10 @@ fixloop:
ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
add r0, r0, r9 /* r0 <- location to fix up in RAM */
ldr r1, [r2, #4]
- and r8, r1, #0xff
- cmp r8, #23 /* relative fixup? */
+ and r7, r1, #0xff
+ cmp r7, #23 /* relative fixup? */
beq fixrel
- cmp r8, #2 /* absolute fixup? */
+ cmp r7, #2 /* absolute fixup? */
beq fixabs
/* ignore unknown type of fixup */
b fixnext
@@ -202,7 +203,7 @@ fixabs:
mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
add r1, r10, r1 /* r1 <- address of symbol in table */
ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r9 /* r1 <- relocated sym addr */
+ add r1, r1, r9 /* r1 <- relocated sym addr */
b fixnext
fixrel:
/* relative fix: increase location by offset */
@@ -220,7 +221,7 @@ clear_bss:
ldr r0, _bss_start_ofs
ldr r1, _bss_end_ofs
ldr r3, _TEXT_BASE /* Text base */
- mov r4, r7 /* reloc addr */
+ mov r4, r6 /* reloc addr */
add r0, r0, r4
add r1, r1, r4
mov r2, #0x00000000 /* clear */
@@ -244,7 +245,7 @@ clbss_l:str r2, [r0] /* clear loop... */
add lr, lr, r9
/* setup parameters for board_init_r */
mov r0, r5 /* gd_t */
- mov r1, r7 /* dest_addr */
+ mov r1, r6 /* dest_addr */
/* jump to it ... */
mov pc, lr
diff --git a/arch/arm/cpu/arm920t/at91/reset.c b/arch/arm/cpu/arm920t/at91/reset.c
index ce9c156..51043ec 100644
--- a/arch/arm/cpu/arm920t/at91/reset.c
+++ b/arch/arm/cpu/arm920t/at91/reset.c
@@ -35,7 +35,10 @@
#include <asm/arch/hardware.h>
#include <asm/arch/at91_st.h>
-void board_reset(void) __attribute__((__weak__));
+void __attribute__((weak)) board_reset(void)
+{
+ /* true empty function for defining weak symbol */
+}
void reset_cpu(ulong ignored)
{
@@ -45,8 +48,7 @@ void reset_cpu(ulong ignored)
serial_exit();
#endif
- if (board_reset)
- board_reset();
+ board_reset();
/* Reset the cpu by setting up the watchdog timer */
writel(AT91_ST_WDMR_RSTEN | AT91_ST_WDMR_EXTEN | AT91_ST_WDMR_WDV(2),
diff --git a/arch/arm/cpu/arm920t/at91/timer.c b/arch/arm/cpu/arm920t/at91/timer.c
index 91377d4..d9a024f 100644
--- a/arch/arm/cpu/arm920t/at91/timer.c
+++ b/arch/arm/cpu/arm920t/at91/timer.c
@@ -32,17 +32,16 @@
#include <common.h>
-#include <asm/io.h>
-#include <asm/hardware.h>
+#include <asm/arch/io.h>
+#include <asm/arch/hardware.h>
#include <asm/arch/at91_tc.h>
#include <asm/arch/at91_pmc.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/* the number of clocks per CONFIG_SYS_HZ */
#define TIMER_LOAD_VAL (CONFIG_SYS_HZ_CLOCK/CONFIG_SYS_HZ)
-static u32 timestamp;
-static u32 lastinc;
-
int timer_init(void)
{
at91_tc_t *tc = (at91_tc_t *) AT91_TC_BASE;
@@ -64,8 +63,8 @@ int timer_init(void)
writel(TIMER_LOAD_VAL, &tc->tc[0].rc);
writel(AT91_TC_CCR_SWTRG | AT91_TC_CCR_CLKEN, &tc->tc[0].ccr);
- lastinc = 0;
- timestamp = 0;
+ gd->lastinc = 0;
+ gd->tbl = 0;
return 0;
}
@@ -86,7 +85,7 @@ ulong get_timer(ulong base)
void set_timer(ulong t)
{
- timestamp = t;
+ gd->tbl = t;
}
void __udelay(unsigned long usec)
@@ -98,8 +97,8 @@ void reset_timer_masked(void)
{
/* reset time */
at91_tc_t *tc = (at91_tc_t *) AT91_TC_BASE;
- lastinc = readl(&tc->tc[0].cv) & 0x0000ffff;
- timestamp = 0;
+ gd->lastinc = readl(&tc->tc[0].cv) & 0x0000ffff;
+ gd->tbl = 0;
}
ulong get_timer_raw(void)
@@ -109,16 +108,16 @@ ulong get_timer_raw(void)
now = readl(&tc->tc[0].cv) & 0x0000ffff;
- if (now >= lastinc) {
+ if (now >= gd->lastinc) {
/* normal mode */
- timestamp += now - lastinc;
+ gd->tbl += now - gd->lastinc;
} else {
/* we have an overflow ... */
- timestamp += now + TIMER_LOAD_VAL - lastinc;
+ gd->tbl += now + TIMER_LOAD_VAL - gd->lastinc;
}
- lastinc = now;
+ gd->lastinc = now;
- return timestamp;
+ return gd->tbl;
}
ulong get_timer_masked(void)
diff --git a/arch/arm/cpu/arm920t/start.S b/arch/arm/cpu/arm920t/start.S
index 01edb9b..08f178d 100644
--- a/arch/arm/cpu/arm920t/start.S
+++ b/arch/arm/cpu/arm920t/start.S
@@ -184,6 +184,7 @@ copyex:
/* Set stackpointer in internal RAM to call board_init_f */
call_board_init_f:
ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
+ bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
ldr r0,=0x00000000
bl board_init_f
@@ -201,22 +202,22 @@ relocate_code:
mov r4, r0 /* save addr_sp */
mov r5, r1 /* save addr of gd */
mov r6, r2 /* save addr of destination */
- mov r7, r2 /* save addr of destination */
/* Set up the stack */
stack_setup:
mov sp, r4
adr r0, _start
+ cmp r0, r6
+ beq clear_bss /* skip relocation */
+ mov r1, r6 /* r1 <- scratch for copy_loop */
ldr r2, _TEXT_BASE
ldr r3, _bss_start_ofs
add r2, r0, r3 /* r2 <- source end address */
- cmp r0, r6
- beq clear_bss
copy_loop:
ldmia r0!, {r9-r10} /* copy from source address [r0] */
- stmia r6!, {r9-r10} /* copy to target address [r1] */
+ stmia r1!, {r9-r10} /* copy to target address [r1] */
cmp r0, r2 /* until source end address [r2] */
blo copy_loop
@@ -225,7 +226,7 @@ copy_loop:
* fix .rel.dyn relocations
*/
ldr r0, _TEXT_BASE /* r0 <- Text base */
- sub r9, r7, r0 /* r9 <- relocation offset */
+ sub r9, r6, r0 /* r9 <- relocation offset */
ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
add r10, r10, r0 /* r10 <- sym table in FLASH */
ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
@@ -236,10 +237,10 @@ fixloop:
ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
add r0, r0, r9 /* r0 <- location to fix up in RAM */
ldr r1, [r2, #4]
- and r8, r1, #0xff
- cmp r8, #23 /* relative fixup? */
+ and r7, r1, #0xff
+ cmp r7, #23 /* relative fixup? */
beq fixrel
- cmp r8, #2 /* absolute fixup? */
+ cmp r7, #2 /* absolute fixup? */
beq fixabs
/* ignore unknown type of fixup */
b fixnext
@@ -248,7 +249,7 @@ fixabs:
mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
add r1, r10, r1 /* r1 <- address of symbol in table */
ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r9 /* r1 <- relocated sym addr */
+ add r1, r1, r9 /* r1 <- relocated sym addr */
b fixnext
fixrel:
/* relative fix: increase location by offset */
@@ -266,7 +267,7 @@ clear_bss:
ldr r0, _bss_start_ofs
ldr r1, _bss_end_ofs
ldr r3, _TEXT_BASE /* Text base */
- mov r4, r7 /* reloc addr */
+ mov r4, r6 /* reloc addr */
add r0, r0, r4
add r1, r1, r4
mov r2, #0x00000000 /* clear */
@@ -297,7 +298,7 @@ _nand_boot_ofs:
add lr, lr, r9
/* setup parameters for board_init_r */
mov r0, r5 /* gd_t */
- mov r1, r7 /* dest_addr */
+ mov r1, r6 /* dest_addr */
/* jump to it ... */
mov pc, lr
diff --git a/arch/arm/cpu/arm925t/start.S b/arch/arm/cpu/arm925t/start.S
index ce590a7..2c0c869 100644
--- a/arch/arm/cpu/arm925t/start.S
+++ b/arch/arm/cpu/arm925t/start.S
@@ -175,6 +175,7 @@ poll1:
/* Set stackpointer in internal RAM to call board_init_f */
call_board_init_f:
ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
+ bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
ldr r0,=0x00000000
bl board_init_f
@@ -192,22 +193,22 @@ relocate_code:
mov r4, r0 /* save addr_sp */
mov r5, r1 /* save addr of gd */
mov r6, r2 /* save addr of destination */
- mov r7, r2 /* save addr of destination */
/* Set up the stack */
stack_setup:
mov sp, r4
adr r0, _start
+ cmp r0, r6
+ beq clear_bss /* skip relocation */
+ mov r1, r6 /* r1 <- scratch for copy_loop */
ldr r2, _TEXT_BASE
ldr r3, _bss_start_ofs
add r2, r0, r3 /* r2 <- source end address */
- cmp r0, r6
- beq clear_bss
copy_loop:
ldmia r0!, {r9-r10} /* copy from source address [r0] */
- stmia r6!, {r9-r10} /* copy to target address [r1] */
+ stmia r1!, {r9-r10} /* copy to target address [r1] */
cmp r0, r2 /* until source end address [r2] */
blo copy_loop
@@ -216,7 +217,7 @@ copy_loop:
* fix .rel.dyn relocations
*/
ldr r0, _TEXT_BASE /* r0 <- Text base */
- sub r9, r7, r0 /* r9 <- relocation offset */
+ sub r9, r6, r0 /* r9 <- relocation offset */
ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
add r10, r10, r0 /* r10 <- sym table in FLASH */
ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
@@ -227,10 +228,10 @@ fixloop:
ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
add r0, r0, r9 /* r0 <- location to fix up in RAM */
ldr r1, [r2, #4]
- and r8, r1, #0xff
- cmp r8, #23 /* relative fixup? */
+ and r7, r1, #0xff
+ cmp r7, #23 /* relative fixup? */
beq fixrel
- cmp r8, #2 /* absolute fixup? */
+ cmp r7, #2 /* absolute fixup? */
beq fixabs
/* ignore unknown type of fixup */
b fixnext
@@ -239,7 +240,7 @@ fixabs:
mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
add r1, r10, r1 /* r1 <- address of symbol in table */
ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r9 /* r1 <- relocated sym addr */
+ add r1, r1, r9 /* r1 <- relocated sym addr */
b fixnext
fixrel:
/* relative fix: increase location by offset */
@@ -257,7 +258,7 @@ clear_bss:
ldr r0, _bss_start_ofs
ldr r1, _bss_end_ofs
ldr r3, _TEXT_BASE /* Text base */
- mov r4, r7 /* reloc addr */
+ mov r4, r6 /* reloc addr */
add r0, r0, r4
add r1, r1, r4
mov r2, #0x00000000 /* clear */
@@ -288,7 +289,7 @@ _nand_boot_ofs:
add lr, lr, r9
/* setup parameters for board_init_r */
mov r0, r5 /* gd_t */
- mov r1, r7 /* dest_addr */
+ mov r1, r6 /* dest_addr */
/* jump to it ... */
mov pc, lr
diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c
index f699f4d..c1822b7 100644
--- a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c
+++ b/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c
@@ -204,6 +204,11 @@ void at91_macb_hw_init(void)
#else
at91_set_b_periph(AT91_PIO_PORTA, 23, 0); /* ETX2 */
at91_set_b_periph(AT91_PIO_PORTA, 24, 0); /* ETX3 */
+#if defined(CONFIG_AT91SAM9G20)
+ /* 9G20 BOOT ROM initializes those pins to multi-drive, undo that */
+ at91_set_pio_multi_drive(AT91_PIO_PORTA, 23, 0);
+ at91_set_pio_multi_drive(AT91_PIO_PORTA, 24, 0);
+#endif
#endif
at91_set_b_periph(AT91_PIO_PORTA, 22, 0); /* ETXER */
#endif
diff --git a/arch/arm/cpu/arm926ejs/davinci/timer.c b/arch/arm/cpu/arm926ejs/davinci/timer.c
index 9da7443..1c6fa4a 100644
--- a/arch/arm/cpu/arm926ejs/davinci/timer.c
+++ b/arch/arm/cpu/arm926ejs/davinci/timer.c
@@ -40,6 +40,8 @@
#include <common.h>
#include <asm/io.h>
+DECLARE_GLOBAL_DATA_PTR;
+
struct davinci_timer {
u_int32_t pid12;
u_int32_t emumgt;
@@ -57,11 +59,9 @@ struct davinci_timer {
static struct davinci_timer * const timer =
(struct davinci_timer *)CONFIG_SYS_TIMERBASE;
-#define TIMER_LOAD_VAL (CONFIG_SYS_HZ_CLOCK / CONFIG_SYS_HZ)
-#define TIM_CLK_DIV 16
+#define TIMER_LOAD_VAL 0xffffffff
-static ulong timestamp;
-static ulong lastinc;
+#define TIM_CLK_DIV 16
int timer_init(void)
{
@@ -71,72 +71,51 @@ int timer_init(void)
writel(0x06 | ((TIM_CLK_DIV - 1) << 8), &timer->tgcr);
writel(0x0, &timer->tim34);
writel(TIMER_LOAD_VAL, &timer->prd34);
- lastinc = 0;
- timestamp = 0;
writel(2 << 22, &timer->tcr);
+ gd->timer_rate_hz = CONFIG_SYS_HZ_CLOCK / TIM_CLK_DIV;
+ gd->timer_reset_value = 0;
return(0);
}
void reset_timer(void)
{
- writel(0x0, &timer->tcr);
- writel(0x0, &timer->tim34);
- lastinc = 0;
- timestamp = 0;
- writel(2 << 22, &timer->tcr);
+ gd->timer_reset_value = get_ticks();
}
-static ulong get_timer_raw(void)
+/*
+ * Get the current 64 bit timer tick count
+ */
+unsigned long long get_ticks(void)
{
- ulong now = readl(&timer->tim34);
-
- if (now >= lastinc) {
- /* normal mode */
- timestamp += now - lastinc;
- } else {
- /* overflow ... */
- timestamp += now + TIMER_LOAD_VAL - lastinc;
- }
- lastinc = now;
- return timestamp;
+ unsigned long now = readl(&timer->tim34);
+
+ /* increment tbu if tbl has rolled over */
+ if (now < gd->tbl)
+ gd->tbu++;
+ gd->tbl = now;
+
+ return (((unsigned long long)gd->tbu) << 32) | gd->tbl;
}
ulong get_timer(ulong base)
{
- return((get_timer_raw() / (TIMER_LOAD_VAL / TIM_CLK_DIV)) - base);
-}
+ unsigned long long timer_diff;
-void set_timer(ulong t)
-{
- timestamp = t;
+ timer_diff = get_ticks() - gd->timer_reset_value;
+
+ return (timer_diff / (gd->timer_rate_hz / CONFIG_SYS_HZ)) - base;
}
void __udelay(unsigned long usec)
{
- ulong tmo;
- ulong endtime;
- signed long diff;
-
- tmo = CONFIG_SYS_HZ_CLOCK / 1000;
- tmo *= usec;
- tmo /= (1000 * TIM_CLK_DIV);
-
- endtime = get_timer_raw() + tmo;
+ unsigned long long endtime;
- do {
- ulong now = get_timer_raw();
- diff = endtime - now;
- } while (diff >= 0);
-}
+ endtime = ((unsigned long long)usec * gd->timer_rate_hz) / 1000000UL;
+ endtime += get_ticks();
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
- return(get_timer(0));
+ while (get_ticks() < endtime)
+ ;
}
/*
diff --git a/arch/arm/cpu/arm926ejs/mx25/generic.c b/arch/arm/cpu/arm926ejs/mx25/generic.c
index b80a389..c6e1146 100644
--- a/arch/arm/cpu/arm926ejs/mx25/generic.c
+++ b/arch/arm/cpu/arm926ejs/mx25/generic.c
@@ -260,4 +260,16 @@ void mx25_fec_init_pins (void)
writel (outpadctl, &padctl->pad_fec_tdata1);
}
+
+void imx_get_mac_from_fuse(unsigned char *mac)
+{
+ int i;
+ struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE;
+ struct fuse_bank *bank = &iim->bank[0];
+ struct fuse_bank0_regs *fuse =
+ (struct fuse_bank0_regs *)bank->fuse_regs;
+
+ for (i = 0; i < 6; i++)
+ mac[i] = readl(&fuse->mac_addr[i]) & 0xff;
+}
#endif /* CONFIG_FEC_MXC */
diff --git a/arch/arm/cpu/arm926ejs/mx27/generic.c b/arch/arm/cpu/arm926ejs/mx27/generic.c
index ae2ce58..27642bf 100644
--- a/arch/arm/cpu/arm926ejs/mx27/generic.c
+++ b/arch/arm/cpu/arm926ejs/mx27/generic.c
@@ -313,6 +313,18 @@ void mx27_fec_init_pins(void)
for (i = 0; i < ARRAY_SIZE(mode); i++)
imx_gpio_mode(mode[i]);
}
+
+void imx_get_mac_from_fuse(unsigned char *mac)
+{
+ int i;
+ struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE;
+ struct fuse_bank *bank = &iim->bank[0];
+ struct fuse_bank0_regs *fuse =
+ (struct fuse_bank0_regs *)bank->fuse_regs;
+
+ for (i = 0; i < 6; i++)
+ mac[6 - 1 - i] = readl(&fuse->mac_addr[i]) & 0xff;
+}
#endif /* CONFIG_FEC_MXC */
#ifdef CONFIG_MXC_MMC
diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S
index 6dcc9b4..5519252 100644
--- a/arch/arm/cpu/arm926ejs/start.S
+++ b/arch/arm/cpu/arm926ejs/start.S
@@ -174,6 +174,7 @@ reset:
/* Set stackpointer in internal RAM to call board_init_f */
call_board_init_f:
ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
+ bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
ldr r0,=0x00000000
bl board_init_f
@@ -191,22 +192,22 @@ relocate_code:
mov r4, r0 /* save addr_sp */
mov r5, r1 /* save addr of gd */
mov r6, r2 /* save addr of destination */
- mov r7, r2 /* save addr of destination */
/* Set up the stack */
stack_setup:
mov sp, r4
adr r0, _start
+ cmp r0, r6
+ beq clear_bss /* skip relocation */
+ mov r1, r6 /* r1 <- scratch for copy loop */
ldr r2, _TEXT_BASE
ldr r3, _bss_start_ofs
add r2, r0, r3 /* r2 <- source end address */
- cmp r0, r6
- beq clear_bss
copy_loop:
ldmia r0!, {r9-r10} /* copy from source address [r0] */
- stmia r6!, {r9-r10} /* copy to target address [r1] */
+ stmia r1!, {r9-r10} /* copy to target address [r1] */
cmp r0, r2 /* until source end address [r2] */
blo copy_loop
@@ -215,7 +216,7 @@ copy_loop:
* fix .rel.dyn relocations
*/
ldr r0, _TEXT_BASE /* r0 <- Text base */
- sub r9, r7, r0 /* r9 <- relocation offset */
+ sub r9, r6, r0 /* r9 <- relocation offset */
ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
add r10, r10, r0 /* r10 <- sym table in FLASH */
ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
@@ -226,10 +227,10 @@ fixloop:
ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
add r0, r0, r9 /* r0 <- location to fix up in RAM */
ldr r1, [r2, #4]
- and r8, r1, #0xff
- cmp r8, #23 /* relative fixup? */
+ and r7, r1, #0xff
+ cmp r7, #23 /* relative fixup? */
beq fixrel
- cmp r8, #2 /* absolute fixup? */
+ cmp r7, #2 /* absolute fixup? */
beq fixabs
/* ignore unknown type of fixup */
b fixnext
@@ -238,7 +239,7 @@ fixabs:
mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
add r1, r10, r1 /* r1 <- address of symbol in table */
ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r9 /* r1 <- relocated sym addr */
+ add r1, r1, r9 /* r1 <- relocated sym addr */
b fixnext
fixrel:
/* relative fix: increase location by offset */
@@ -256,7 +257,7 @@ clear_bss:
ldr r0, _bss_start_ofs
ldr r1, _bss_end_ofs
ldr r3, _TEXT_BASE /* Text base */
- mov r4, r7 /* reloc addr */
+ mov r4, r6 /* reloc addr */
add r0, r0, r4
add r1, r1, r4
mov r2, #0x00000000 /* clear */
@@ -287,7 +288,7 @@ _nand_boot_ofs:
add lr, lr, r9
/* setup parameters for board_init_r */
mov r0, r5 /* gd_t */
- mov r1, r7 /* dest_addr */
+ mov r1, r6 /* dest_addr */
/* jump to it ... */
mov pc, lr
diff --git a/arch/arm/cpu/arm946es/start.S b/arch/arm/cpu/arm946es/start.S
index f4950f7..f9c9470 100644
--- a/arch/arm/cpu/arm946es/start.S
+++ b/arch/arm/cpu/arm946es/start.S
@@ -146,6 +146,7 @@ reset:
/* Set stackpointer in internal RAM to call board_init_f */
call_board_init_f:
ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
+ bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
ldr r0,=0x00000000
bl board_init_f
@@ -163,22 +164,22 @@ relocate_code:
mov r4, r0 /* save addr_sp */
mov r5, r1 /* save addr of gd */
mov r6, r2 /* save addr of destination */
- mov r7, r2 /* save addr of destination */
/* Set up the stack */
stack_setup:
mov sp, r4
adr r0, _start
+ cmp r0, r6
+ beq clear_bss /* skip relocation */
+ mov r1, r6 /* r1 <- scratch for copy_loop */
ldr r2, _TEXT_BASE
ldr r3, _bss_start_ofs
add r2, r0, r3 /* r2 <- source end address */
- cmp r0, r6
- beq clear_bss
copy_loop:
ldmia r0!, {r9-r10} /* copy from source address [r0] */
- stmia r6!, {r9-r10} /* copy to target address [r1] */
+ stmia r1!, {r9-r10} /* copy to target address [r1] */
cmp r0, r2 /* until source end address [r2] */
blo copy_loop
@@ -187,7 +188,7 @@ copy_loop:
* fix .rel.dyn relocations
*/
ldr r0, _TEXT_BASE /* r0 <- Text base */
- sub r9, r7, r0 /* r9 <- relocation offset */
+ sub r9, r6, r0 /* r9 <- relocation offset */
ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
add r10, r10, r0 /* r10 <- sym table in FLASH */
ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
@@ -198,10 +199,10 @@ fixloop:
ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
add r0, r0, r9 /* r0 <- location to fix up in RAM */
ldr r1, [r2, #4]
- and r8, r1, #0xff
- cmp r8, #23 /* relative fixup? */
+ and r7, r1, #0xff
+ cmp r7, #23 /* relative fixup? */
beq fixrel
- cmp r8, #2 /* absolute fixup? */
+ cmp r7, #2 /* absolute fixup? */
beq fixabs
/* ignore unknown type of fixup */
b fixnext
@@ -210,7 +211,7 @@ fixabs:
mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
add r1, r10, r1 /* r1 <- address of symbol in table */
ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r9 /* r1 <- relocated sym addr */
+ add r1, r1, r9 /* r1 <- relocated sym addr */
b fixnext
fixrel:
/* relative fix: increase location by offset */
@@ -228,7 +229,7 @@ clear_bss:
ldr r0, _bss_start_ofs
ldr r1, _bss_end_ofs
ldr r3, _TEXT_BASE /* Text base */
- mov r4, r7 /* reloc addr */
+ mov r4, r6 /* reloc addr */
add r0, r0, r4
add r1, r1, r4
mov r2, #0x00000000 /* clear */
@@ -254,7 +255,7 @@ _nand_boot: .word nand_boot
add lr, lr, r9
/* setup parameters for board_init_r */
mov r0, r5 /* gd_t */
- mov r1, r7 /* dest_addr */
+ mov r1, r6 /* dest_addr */
/* jump to it ... */
mov pc, lr
diff --git a/arch/arm/cpu/arm_intcm/start.S b/arch/arm/cpu/arm_intcm/start.S
index fcaba30..d28e745 100644
--- a/arch/arm/cpu/arm_intcm/start.S
+++ b/arch/arm/cpu/arm_intcm/start.S
@@ -142,6 +142,7 @@ reset:
/* Set stackpointer in internal RAM to call board_init_f */
call_board_init_f:
ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
+ bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
ldr r0,=0x00000000
bl board_init_f
@@ -159,22 +160,22 @@ relocate_code:
mov r4, r0 /* save addr_sp */
mov r5, r1 /* save addr of gd */
mov r6, r2 /* save addr of destination */
- mov r7, r2 /* save addr of destination */
/* Set up the stack */
stack_setup:
mov sp, r4
adr r0, _start
+ cmp r0, r6
+ beq clear_bss /* skip relocation */
+ mov r1, r6 /* r1 <- scratch for copy_loop */
ldr r2, _TEXT_BASE
ldr r3, _bss_start_ofs
add r2, r0, r3 /* r2 <- source end address */
- cmp r0, r6
- beq clear_bss
copy_loop:
ldmia r0!, {r9-r10} /* copy from source address [r0] */
- stmia r6!, {r9-r10} /* copy to target address [r1] */
+ stmia r1!, {r9-r10} /* copy to target address [r1] */
cmp r0, r2 /* until source end address [r2] */
blo copy_loop
@@ -183,7 +184,7 @@ copy_loop:
* fix .rel.dyn relocations
*/
ldr r0, _TEXT_BASE /* r0 <- Text base */
- sub r9, r7, r0 /* r9 <- relocation offset */
+ sub r9, r6, r0 /* r9 <- relocation offset */
ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
add r10, r10, r0 /* r10 <- sym table in FLASH */
ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
@@ -194,10 +195,10 @@ fixloop:
ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
add r0, r0, r9 /* r0 <- location to fix up in RAM */
ldr r1, [r2, #4]
- and r8, r1, #0xff
- cmp r8, #23 /* relative fixup? */
+ and r7, r1, #0xff
+ cmp r7, #23 /* relative fixup? */
beq fixrel
- cmp r8, #2 /* absolute fixup? */
+ cmp r7, #2 /* absolute fixup? */
beq fixabs
/* ignore unknown type of fixup */
b fixnext
@@ -206,7 +207,7 @@ fixabs:
mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
add r1, r10, r1 /* r1 <- address of symbol in table */
ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r9 /* r1 <- relocated sym addr */
+ add r1, r1, r9 /* r1 <- relocated sym addr */
b fixnext
fixrel:
/* relative fix: increase location by offset */
@@ -224,7 +225,7 @@ clear_bss:
ldr r0, _bss_start_ofs
ldr r1, _bss_end_ofs
ldr r3, _TEXT_BASE /* Text base */
- mov r4, r7 /* reloc addr */
+ mov r4, r6 /* reloc addr */
add r0, r0, r4
add r1, r1, r4
mov r2, #0x00000000 /* clear */
@@ -255,7 +256,7 @@ _nand_boot_ofs:
add lr, lr, r9
/* setup parameters for board_init_r */
mov r0, r5 /* gd_t */
- mov r1, r7 /* dest_addr */
+ mov r1, r6 /* dest_addr */
/* jump to it ... */
mov pc, lr
diff --git a/arch/arm/cpu/armv7/mx5/soc.c b/arch/arm/cpu/armv7/mx5/soc.c
index 7c7a565..2900119 100644
--- a/arch/arm/cpu/armv7/mx5/soc.c
+++ b/arch/arm/cpu/armv7/mx5/soc.c
@@ -100,6 +100,20 @@ int cpu_eth_init(bd_t *bis)
return rc;
}
+#if defined(CONFIG_FEC_MXC)
+void imx_get_mac_from_fuse(unsigned char *mac)
+{
+ int i;
+ struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE;
+ struct fuse_bank *bank = &iim->bank[1];
+ struct fuse_bank1_regs *fuse =
+ (struct fuse_bank1_regs *)bank->fuse_regs;
+
+ for (i = 0; i < 6; i++)
+ mac[i] = readl(&fuse->mac_addr[i]) & 0xff;
+}
+#endif
+
/*
* Initializes on-chip MMC controllers.
* to override, implement board_mmc_init()
diff --git a/arch/arm/cpu/armv7/omap-common/timer.c b/arch/arm/cpu/armv7/omap-common/timer.c
index 6b8cf7b..9beebb1 100644
--- a/arch/arm/cpu/armv7/omap-common/timer.c
+++ b/arch/arm/cpu/armv7/omap-common/timer.c
@@ -35,8 +35,8 @@
#include <common.h>
#include <asm/io.h>
-static ulong timestamp;
-static ulong lastinc;
+DECLARE_GLOBAL_DATA_PTR;
+
static struct gptimer *timer_base = (struct gptimer *)CONFIG_SYS_TIMERBASE;
/*
@@ -74,7 +74,7 @@ ulong get_timer(ulong base)
void set_timer(ulong t)
{
- timestamp = t;
+ gd->tbl = t;
}
/* delay x useconds */
@@ -96,8 +96,8 @@ void __udelay(unsigned long usec)
void reset_timer_masked(void)
{
/* reset time, capture current incrementer value time */
- lastinc = readl(&timer_base->tcrr) / (TIMER_CLOCK / CONFIG_SYS_HZ);
- timestamp = 0; /* start "advancing" time stamp from 0 */
+ gd->lastinc = readl(&timer_base->tcrr) / (TIMER_CLOCK / CONFIG_SYS_HZ);
+ gd->tbl = 0; /* start "advancing" time stamp from 0 */
}
ulong get_timer_masked(void)
@@ -105,14 +105,14 @@ ulong get_timer_masked(void)
/* current tick value */
ulong now = readl(&timer_base->tcrr) / (TIMER_CLOCK / CONFIG_SYS_HZ);
- if (now >= lastinc) /* normal mode (non roll) */
+ if (now >= gd->lastinc) /* normal mode (non roll) */
/* move stamp fordward with absoulte diff ticks */
- timestamp += (now - lastinc);
+ gd->tbl += (now - gd->lastinc);
else /* we have rollover of incrementer */
- timestamp += ((TIMER_LOAD_VAL / (TIMER_CLOCK / CONFIG_SYS_HZ))
- - lastinc) + now;
- lastinc = now;
- return timestamp;
+ gd->tbl += ((TIMER_LOAD_VAL / (TIMER_CLOCK / CONFIG_SYS_HZ))
+ - gd->lastinc) + now;
+ gd->lastinc = now;
+ return gd->tbl;
}
/*
diff --git a/arch/arm/cpu/armv7/omap3/emif4.c b/arch/arm/cpu/armv7/omap3/emif4.c
index 0870857..3085637 100644
--- a/arch/arm/cpu/armv7/omap3/emif4.c
+++ b/arch/arm/cpu/armv7/omap3/emif4.c
@@ -29,6 +29,7 @@
#include <asm/arch/sys_proto.h>
#include <asm/arch/emif4.h>
+DECLARE_GLOBAL_DATA_PTR;
extern omap3_sysinfo sysinfo;
static emif4_t *emif4_base = (emif4_t *)OMAP34XX_SDRC_BASE;
@@ -48,10 +49,11 @@ u32 is_mem_sdr(void)
*/
u32 get_sdr_cs_size(u32 cs)
{
- u32 size;
+ u32 size = 0;
/* TODO: Calculate the size based on EMIF4 configuration */
- size = CONFIG_SYS_CS0_SIZE;
+ if (cs == CS0)
+ size = CONFIG_SYS_CS0_SIZE;
return size;
}
@@ -138,7 +140,6 @@ void do_emif4_init(void)
*/
int dram_init(void)
{
- DECLARE_GLOBAL_DATA_PTR;
unsigned int size0 = 0, size1 = 0;
size0 = get_sdr_cs_size(CS0);
@@ -156,7 +157,6 @@ int dram_init(void)
void dram_init_banksize (void)
{
- DECLARE_GLOBAL_DATA_PTR;
unsigned int size0 = 0, size1 = 0;
size0 = get_sdr_cs_size(CS0);
diff --git a/arch/arm/cpu/armv7/omap3/sdrc.c b/arch/arm/cpu/armv7/omap3/sdrc.c
index a4979ce..2a7970b 100644
--- a/arch/arm/cpu/armv7/omap3/sdrc.c
+++ b/arch/arm/cpu/armv7/omap3/sdrc.c
@@ -37,6 +37,7 @@
#include <asm/arch/mem.h>
#include <asm/arch/sys_proto.h>
+DECLARE_GLOBAL_DATA_PTR;
extern omap3_sysinfo sysinfo;
static struct sdrc *sdrc_base = (struct sdrc *)OMAP34XX_SDRC_BASE;
@@ -172,7 +173,6 @@ void do_sdrc_init(u32 cs, u32 early)
*/
int dram_init(void)
{
- DECLARE_GLOBAL_DATA_PTR;
unsigned int size0 = 0, size1 = 0;
size0 = get_sdr_cs_size(CS0);
@@ -194,7 +194,6 @@ int dram_init(void)
void dram_init_banksize (void)
{
- DECLARE_GLOBAL_DATA_PTR;
unsigned int size0 = 0, size1 = 0;
size0 = get_sdr_cs_size(CS0);
diff --git a/arch/arm/cpu/armv7/s5p-common/timer.c b/arch/arm/cpu/armv7/s5p-common/timer.c
index 0490650..651fd5d 100644
--- a/arch/arm/cpu/armv7/s5p-common/timer.c
+++ b/arch/arm/cpu/armv7/s5p-common/timer.c
@@ -65,15 +65,12 @@ int timer_init(void)
writel((PRESCALER_1 & 0xff) << 8, &timer->tcfg0);
writel((MUX_DIV_2 & 0xf) << MUX4_DIV_SHIFT, &timer->tcfg1);
- if (count_value == 0) {
- /* reset initial value */
- /* count_value = 2085937.5(HZ) (per 1 sec)*/
- count_value = get_pwm_clk() / ((PRESCALER_1 + 1) *
- (MUX_DIV_2 + 1));
-
- /* count_value / 100 = 20859.375(HZ) (per 10 msec) */
- count_value = count_value / 100;
- }
+ /* count_value = 2085937.5(HZ) (per 1 sec)*/
+ count_value = get_pwm_clk() / ((PRESCALER_1 + 1) *
+ (MUX_DIV_2 + 1));
+
+ /* count_value / 100 = 20859.375(HZ) (per 10 msec) */
+ count_value = count_value / 100;
/* set count value */
writel(count_value, &timer->tcntb4);
@@ -114,8 +111,11 @@ void set_timer(unsigned long t)
/* delay x useconds */
void __udelay(unsigned long usec)
{
+ struct s5p_timer *const timer = s5p_get_base_timer();
unsigned long tmo, tmp;
+ count_value = readl(&timer->tcntb4);
+
if (usec >= 1000) {
/*
* if "big" number, spread normalization
diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S
index 2dfdafe..684f2d2 100644
--- a/arch/arm/cpu/armv7/start.S
+++ b/arch/arm/cpu/armv7/start.S
@@ -142,6 +142,7 @@ next:
/* Set stackpointer in internal RAM to call board_init_f */
call_board_init_f:
ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
+ bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
ldr r0,=0x00000000
bl board_init_f
@@ -159,24 +160,24 @@ relocate_code:
mov r4, r0 /* save addr_sp */
mov r5, r1 /* save addr of gd */
mov r6, r2 /* save addr of destination */
- mov r7, r2 /* save addr of destination */
/* Set up the stack */
stack_setup:
mov sp, r4
adr r0, _start
+#ifndef CONFIG_PRELOADER
+ cmp r0, r6
+ beq clear_bss /* skip relocation */
+#endif
+ mov r1, r6 /* r1 <- scratch for copy_loop */
ldr r2, _TEXT_BASE
ldr r3, _bss_start_ofs
add r2, r0, r3 /* r2 <- source end address */
- cmp r0, r6
-#ifndef CONFIG_PRELOADER
- beq jump_2_ram
-#endif
copy_loop:
ldmia r0!, {r9-r10} /* copy from source address [r0] */
- stmia r6!, {r9-r10} /* copy to target address [r1] */
+ stmia r1!, {r9-r10} /* copy to target address [r1] */
cmp r0, r2 /* until source end address [r2] */
blo copy_loop
@@ -185,7 +186,7 @@ copy_loop:
* fix .rel.dyn relocations
*/
ldr r0, _TEXT_BASE /* r0 <- Text base */
- sub r9, r7, r0 /* r9 <- relocation offset */
+ sub r9, r6, r0 /* r9 <- relocation offset */
ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
add r10, r10, r0 /* r10 <- sym table in FLASH */
ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
@@ -196,10 +197,10 @@ fixloop:
ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
add r0, r0, r9 /* r0 <- location to fix up in RAM */
ldr r1, [r2, #4]
- and r8, r1, #0xff
- cmp r8, #23 /* relative fixup? */
+ and r7, r1, #0xff
+ cmp r7, #23 /* relative fixup? */
beq fixrel
- cmp r8, #2 /* absolute fixup? */
+ cmp r7, #2 /* absolute fixup? */
beq fixabs
/* ignore unknown type of fixup */
b fixnext
@@ -208,7 +209,7 @@ fixabs:
mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
add r1, r10, r1 /* r1 <- address of symbol in table */
ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r9 /* r1 <- relocated sym addr */
+ add r1, r1, r9 /* r1 <- relocated sym addr */
b fixnext
fixrel:
/* relative fix: increase location by offset */
@@ -224,7 +225,7 @@ clear_bss:
ldr r0, _bss_start_ofs
ldr r1, _bss_end_ofs
ldr r3, _TEXT_BASE /* Text base */
- mov r4, r7 /* reloc addr */
+ mov r4, r6 /* reloc addr */
add r0, r0, r4
add r1, r1, r4
mov r2, #0x00000000 /* clear */
@@ -246,7 +247,7 @@ jump_2_ram:
add lr, lr, r9
/* setup parameters for board_init_r */
mov r0, r5 /* gd_t */
- mov r1, r7 /* dest_addr */
+ mov r1, r6 /* dest_addr */
/* jump to it ... */
mov pc, lr
diff --git a/arch/arm/cpu/armv7/syslib.c b/arch/arm/cpu/armv7/syslib.c
index f9ed9a3..84d17f0 100644
--- a/arch/arm/cpu/armv7/syslib.c
+++ b/arch/arm/cpu/armv7/syslib.c
@@ -23,7 +23,6 @@
#include <common.h>
#include <asm/io.h>
-#include <asm/arch/sys_proto.h>
/************************************************************
* sdelay() - simple spin loop. Will be constant time as
diff --git a/arch/arm/cpu/ixp/start.S b/arch/arm/cpu/ixp/start.S
index d1ab19b..9f8c15b 100644
--- a/arch/arm/cpu/ixp/start.S
+++ b/arch/arm/cpu/ixp/start.S
@@ -268,6 +268,7 @@ reset:
/* Set stackpointer in internal RAM to call board_init_f */
call_board_init_f:
ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
+ bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
ldr r0,=0x00000000
bl board_init_f
@@ -285,22 +286,22 @@ relocate_code:
mov r4, r0 /* save addr_sp */
mov r5, r1 /* save addr of gd */
mov r6, r2 /* save addr of destination */
- mov r7, r2 /* save addr of destination */
/* Set up the stack */
stack_setup:
mov sp, r4
adr r0, _start
+ cmp r0, r6
+ beq clear_bss /* skip relocation */
+ mov r1, r6 /* r1 <- scratch for copy_loop */
ldr r2, _TEXT_BASE
ldr r3, _bss_start_ofs
add r2, r0, r3 /* r2 <- source end address */
- cmp r0, r6
- beq clear_bss
copy_loop:
ldmia r0!, {r9-r10} /* copy from source address [r0] */
- stmia r6!, {r9-r10} /* copy to target address [r1] */
+ stmia r1!, {r9-r10} /* copy to target address [r1] */
cmp r0, r2 /* until source end address [r2] */
blo copy_loop
@@ -309,7 +310,7 @@ copy_loop:
* fix .rel.dyn relocations
*/
ldr r0, _TEXT_BASE /* r0 <- Text base */
- sub r9, r7, r0 /* r9 <- relocation offset */
+ sub r9, r6, r0 /* r9 <- relocation offset */
ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
add r10, r10, r0 /* r10 <- sym table in FLASH */
ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
@@ -320,10 +321,10 @@ fixloop:
ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
add r0, r0, r9 /* r0 <- location to fix up in RAM */
ldr r1, [r2, #4]
- and r8, r1, #0xff
- cmp r8, #23 /* relative fixup? */
+ and r7, r1, #0xff
+ cmp r7, #23 /* relative fixup? */
beq fixrel
- cmp r8, #2 /* absolute fixup? */
+ cmp r7, #2 /* absolute fixup? */
beq fixabs
/* ignore unknown type of fixup */
b fixnext
@@ -332,7 +333,7 @@ fixabs:
mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
add r1, r10, r1 /* r1 <- address of symbol in table */
ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r9 /* r1 <- relocated sym addr */
+ add r1, r1, r9 /* r1 <- relocated sym addr */
b fixnext
fixrel:
/* relative fix: increase location by offset */
@@ -350,7 +351,7 @@ clear_bss:
ldr r0, _bss_start_ofs
ldr r1, _bss_end_ofs
ldr r3, _TEXT_BASE /* Text base */
- mov r4, r7 /* reloc addr */
+ mov r4, r6 /* reloc addr */
add r0, r0, r4
add r1, r1, r4
mov r2, #0x00000000 /* clear */
@@ -374,7 +375,7 @@ clbss_l:str r2, [r0] /* clear loop... */
add lr, lr, r9
/* setup parameters for board_init_r */
mov r0, r5 /* gd_t */
- mov r1, r7 /* dest_addr */
+ mov r1, r6 /* dest_addr */
/* jump to it ... */
mov pc, lr
diff --git a/arch/arm/cpu/lh7a40x/start.S b/arch/arm/cpu/lh7a40x/start.S
index 5cf477b..32dfe8b 100644
--- a/arch/arm/cpu/lh7a40x/start.S
+++ b/arch/arm/cpu/lh7a40x/start.S
@@ -155,6 +155,7 @@ reset:
/* Set stackpointer in internal RAM to call board_init_f */
call_board_init_f:
ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
+ bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
ldr r0,=0x00000000
bl board_init_f
@@ -172,22 +173,22 @@ relocate_code:
mov r4, r0 /* save addr_sp */
mov r5, r1 /* save addr of gd */
mov r6, r2 /* save addr of destination */
- mov r7, r2 /* save addr of destination */
/* Set up the stack */
stack_setup:
mov sp, r4
adr r0, _start
+ cmp r0, r6
+ beq clear_bss /* skip relocation */
+ mov r1, r6 /* r1 <- scratch for copy_loop */
ldr r2, _TEXT_BASE
ldr r3, _bss_start_ofs
add r2, r0, r3 /* r2 <- source end address */
- cmp r0, r6
- beq clear_bss
copy_loop:
ldmia r0!, {r9-r10} /* copy from source address [r0] */
- stmia r6!, {r9-r10} /* copy to target address [r1] */
+ stmia r1!, {r9-r10} /* copy to target address [r1] */
cmp r0, r2 /* until source end address [r2] */
blo copy_loop
@@ -196,7 +197,7 @@ copy_loop:
* fix .rel.dyn relocations
*/
ldr r0, _TEXT_BASE /* r0 <- Text base */
- sub r9, r7, r0 /* r9 <- relocation offset */
+ sub r9, r6, r0 /* r9 <- relocation offset */
ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
add r10, r10, r0 /* r10 <- sym table in FLASH */
ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
@@ -207,10 +208,10 @@ fixloop:
ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
add r0, r0, r9 /* r0 <- location to fix up in RAM */
ldr r1, [r2, #4]
- and r8, r1, #0xff
- cmp r8, #23 /* relative fixup? */
+ and r7, r1, #0xff
+ cmp r7, #23 /* relative fixup? */
beq fixrel
- cmp r8, #2 /* absolute fixup? */
+ cmp r7, #2 /* absolute fixup? */
beq fixabs
/* ignore unknown type of fixup */
b fixnext
@@ -219,7 +220,7 @@ fixabs:
mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
add r1, r10, r1 /* r1 <- address of symbol in table */
ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r9 /* r1 <- relocated sym addr */
+ add r1, r1, r9 /* r1 <- relocated sym addr */
b fixnext
fixrel:
/* relative fix: increase location by offset */
@@ -237,7 +238,7 @@ clear_bss:
ldr r0, _bss_start_ofs
ldr r1, _bss_end_ofs
ldr r3, _TEXT_BASE /* Text base */
- mov r4, r7 /* reloc addr */
+ mov r4, r6 /* reloc addr */
add r0, r0, r4
add r1, r1, r4
mov r2, #0x00000000 /* clear */
@@ -258,7 +259,7 @@ clbss_l:str r2, [r0] /* clear loop... */
add lr, lr, r9
/* setup parameters for board_init_r */
mov r0, r5 /* gd_t */
- mov r1, r7 /* dest_addr */
+ mov r1, r6 /* dest_addr */
/* jump to it ... */
mov pc, lr
diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S
index ae358a5..fbd0def 100644
--- a/arch/arm/cpu/pxa/start.S
+++ b/arch/arm/cpu/pxa/start.S
@@ -220,6 +220,7 @@ zerojmp:
/* Set stackpointer in internal RAM to call board_init_f */
call_board_init_f:
ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
+ bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
ldr r0,=0x00000000
bl board_init_f
@@ -237,23 +238,23 @@ relocate_code:
mov r4, r0 /* save addr_sp */
mov r5, r1 /* save addr of gd */
mov r6, r2 /* save addr of destination */
- mov r7, r2 /* save addr of destination */
/* Set up the stack */
stack_setup:
mov sp, r4
adr r0, _start
+ cmp r0, r6
+ beq clear_bss /* skip relocation */
+ mov r1, r6 /* r1 <- scratch for copy_loop */
ldr r2, _TEXT_BASE
ldr r3, _bss_start_ofs
add r2, r0, r3 /* r2 <- source end address */
- cmp r0, r6
- beq clear_bss
stmfd sp!, {r0-r12}
copy_loop:
ldmia r0!, {r3-r5, r7-r11} /* copy from source address [r0] */
- stmia r6!, {r3-r5, r7-r11} /* copy to target address [r1] */
+ stmia r1!, {r3-r5, r7-r11} /* copy to target address [r1] */
cmp r0, r2 /* until source end address [r2] */
blo copy_loop
ldmfd sp!, {r0-r12}
@@ -263,7 +264,7 @@ copy_loop:
* fix .rel.dyn relocations
*/
ldr r0, _TEXT_BASE /* r0 <- Text base */
- sub r9, r7, r0 /* r9 <- relocation offset */
+ sub r9, r6, r0 /* r9 <- relocation offset */
ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
add r10, r10, r0 /* r10 <- sym table in FLASH */
ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
@@ -274,10 +275,10 @@ fixloop:
ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
add r0, r9 /* r0 <- location to fix up in RAM */
ldr r1, [r2, #4]
- and r8, r1, #0xff
- cmp r8, #23 /* relative fixup? */
+ and r7, r1, #0xff
+ cmp r7, #23 /* relative fixup? */
beq fixrel
- cmp r8, #2 /* absolute fixup? */
+ cmp r7, #2 /* absolute fixup? */
beq fixabs
/* ignore unknown type of fixup */
b fixnext
@@ -286,7 +287,7 @@ fixabs:
mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
add r1, r10, r1 /* r1 <- address of symbol in table */
ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r9 /* r1 <- relocated sym addr */
+ add r1, r1, r9 /* r1 <- relocated sym addr */
b fixnext
fixrel:
/* relative fix: increase location by offset */
@@ -304,7 +305,7 @@ clear_bss:
ldr r0, _bss_start_ofs
ldr r1, _bss_end_ofs
ldr r3, _TEXT_BASE /* Text base */
- mov r4, r7 /* reloc addr */
+ mov r4, r6 /* reloc addr */
add r0, r0, r4
add r1, r1, r4
mov r2, #0x00000000 /* clear */
@@ -332,7 +333,7 @@ _start_oneboot_ofs
add lr, lr, r9
/* setup parameters for board_init_r */
mov r0, r5 /* gd_t */
- mov r1, r7 /* dest_addr */
+ mov r1, r6 /* dest_addr */
/* jump to it ... */
mov pc, lr
diff --git a/arch/arm/cpu/s3c44b0/start.S b/arch/arm/cpu/s3c44b0/start.S
index 8c7100c..9379af6 100644
--- a/arch/arm/cpu/s3c44b0/start.S
+++ b/arch/arm/cpu/s3c44b0/start.S
@@ -127,6 +127,7 @@ reset:
/* Set stackpointer in internal RAM to call board_init_f */
call_board_init_f:
ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
+ bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
ldr r0,=0x00000000
bl board_init_f
@@ -144,22 +145,22 @@ relocate_code:
mov r4, r0 /* save addr_sp */
mov r5, r1 /* save addr of gd */
mov r6, r2 /* save addr of destination */
- mov r7, r2 /* save addr of destination */
/* Set up the stack */
stack_setup:
mov sp, r4
adr r0, _start
+ cmp r0, r6
+ beq clear_bss /* skip relocation */
+ mov r1, r6 /* r1 <- scratch for copy_loop */
ldr r2, _TEXT_BASE
ldr r3, _bss_start_ofs
add r2, r0, r3 /* r2 <- source end address */
- cmp r0, r6
- beq clear_bss
copy_loop:
ldmia r0!, {r9-r10} /* copy from source address [r0] */
- stmia r6!, {r9-r10} /* copy to target address [r1] */
+ stmia r1!, {r9-r10} /* copy to target address [r1] */
cmp r0, r2 /* until source end address [r2] */
blo copy_loop
@@ -168,7 +169,7 @@ copy_loop:
* fix .rel.dyn relocations
*/
ldr r0, _TEXT_BASE /* r0 <- Text base */
- sub r9, r7, r0 /* r9 <- relocation offset */
+ sub r9, r6, r0 /* r9 <- relocation offset */
ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
add r10, r10, r0 /* r10 <- sym table in FLASH */
ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
@@ -179,10 +180,10 @@ fixloop:
ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
add r0, r0, r9 /* r0 <- location to fix up in RAM */
ldr r1, [r2, #4]
- and r8, r1, #0xff
- cmp r8, #23 /* relative fixup? */
+ and r7, r1, #0xff
+ cmp r7, #23 /* relative fixup? */
beq fixrel
- cmp r8, #2 /* absolute fixup? */
+ cmp r7, #2 /* absolute fixup? */
beq fixabs
/* ignore unknown type of fixup */
b fixnext
@@ -191,7 +192,7 @@ fixabs:
mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
add r1, r10, r1 /* r1 <- address of symbol in table */
ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r9 /* r1 <- relocated sym addr */
+ add r1, r1, r9 /* r1 <- relocated sym addr */
b fixnext
fixrel:
/* relative fix: increase location by offset */
@@ -209,7 +210,7 @@ clear_bss:
ldr r0, _bss_start_ofs
ldr r1, _bss_end_ofs
ldr r3, _TEXT_BASE /* Text base */
- mov r4, r7 /* reloc addr */
+ mov r4, r6 /* reloc addr */
add r0, r0, r4
add r1, r1, r4
mov r2, #0x00000000 /* clear */
@@ -233,7 +234,7 @@ clbss_l:str r2, [r0] /* clear loop... */
add lr, lr, r9
/* setup parameters for board_init_r */
mov r0, r5 /* gd_t */
- mov r1, r7 /* dest_addr */
+ mov r1, r6 /* dest_addr */
/* jump to it ... */
mov pc, lr
diff --git a/arch/arm/cpu/sa1100/start.S b/arch/arm/cpu/sa1100/start.S
index 36d44da..7c2db4f 100644
--- a/arch/arm/cpu/sa1100/start.S
+++ b/arch/arm/cpu/sa1100/start.S
@@ -131,6 +131,7 @@ reset:
/* Set stackpointer in internal RAM to call board_init_f */
call_board_init_f:
ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
+ bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
ldr r0,=0x00000000
bl board_init_f
@@ -148,22 +149,22 @@ relocate_code:
mov r4, r0 /* save addr_sp */
mov r5, r1 /* save addr of gd */
mov r6, r2 /* save addr of destination */
- mov r7, r2 /* save addr of destination */
/* Set up the stack */
stack_setup:
mov sp, r4
adr r0, _start
+ cmp r0, r6
+ beq clear_bss /* skip relocation */
+ mov r1, r6 /* r1 <- scratch for copy_loop */
ldr r2, _TEXT_BASE
ldr r3, _bss_start_ofs
add r2, r0, r3 /* r2 <- source end address */
- cmp r0, r6
- beq clear_bss
copy_loop:
ldmia r0!, {r9-r10} /* copy from source address [r0] */
- stmia r6!, {r9-r10} /* copy to target address [r1] */
+ stmia r1!, {r9-r10} /* copy to target address [r1] */
cmp r0, r2 /* until source end address [r2] */
blo copy_loop
@@ -172,7 +173,7 @@ copy_loop:
* fix .rel.dyn relocations
*/
ldr r0, _TEXT_BASE /* r0 <- Text base */
- sub r9, r7, r0 /* r9 <- relocation offset */
+ sub r9, r6, r0 /* r9 <- relocation offset */
ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
add r10, r10, r0 /* r10 <- sym table in FLASH */
ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
@@ -183,10 +184,10 @@ fixloop:
ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
add r0, r0, r9 /* r0 <- location to fix up in RAM */
ldr r1, [r2, #4]
- and r8, r1, #0xff
- cmp r8, #23 /* relative fixup? */
+ and r7, r1, #0xff
+ cmp r7, #23 /* relative fixup? */
beq fixrel
- cmp r8, #2 /* absolute fixup? */
+ cmp r7, #2 /* absolute fixup? */
beq fixabs
/* ignore unknown type of fixup */
b fixnext
@@ -195,7 +196,7 @@ fixabs:
mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
add r1, r10, r1 /* r1 <- address of symbol in table */
ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r9 /* r1 <- relocated sym addr */
+ add r1, r1, r9 /* r1 <- relocated sym addr */
b fixnext
fixrel:
/* relative fix: increase location by offset */
@@ -213,7 +214,7 @@ clear_bss:
ldr r0, _bss_start_ofs
ldr r1, _bss_end_ofs
ldr r3, _TEXT_BASE /* Text base */
- mov r4, r7 /* reloc addr */
+ mov r4, r6 /* reloc addr */
add r0, r0, r4
add r1, r1, r4
mov r2, #0x00000000 /* clear */
@@ -234,7 +235,7 @@ clbss_l:str r2, [r0] /* clear loop... */
add lr, lr, r9
/* setup parameters for board_init_r */
mov r0, r5 /* gd_t */
- mov r1, r7 /* dest_addr */
+ mov r1, r6 /* dest_addr */
/* jump to it ... */
mov pc, lr
diff --git a/arch/arm/include/asm/arch-mx25/imx-regs.h b/arch/arm/include/asm/arch-mx25/imx-regs.h
index f5a2929..55ad115 100644
--- a/arch/arm/include/asm/arch-mx25/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx25/imx-regs.h
@@ -36,6 +36,7 @@
#ifndef __ASSEMBLY__
#ifdef CONFIG_FEC_MXC
extern void mx25_fec_init_pins(void);
+extern void imx_get_mac_from_fuse(unsigned char *mac);
#endif
/* Clock Control Module (CCM) registers */
@@ -129,12 +130,17 @@ struct iim_regs {
u32 iim_srev;
u32 iim_prog_p;
u32 res1[0x1f5];
- u32 iim_bank_area0[0x20];
- u32 res2[0xe0];
- u32 iim_bank_area1[0x20];
- u32 res3[0xe0];
- u32 iim_bank_area2[0x20];
+ struct fuse_bank {
+ u32 fuse_regs[0x20];
+ u32 fuse_rsvd[0xe0];
+ } bank[3];
};
+
+struct fuse_bank0_regs {
+ u32 fuse0_25[0x1a];
+ u32 mac_addr[6];
+};
+
#endif
/* AIPS 1 */
@@ -312,7 +318,4 @@ struct iim_regs {
#define WSR_UNLOCK1 0x5555
#define WSR_UNLOCK2 0xAAAA
-/* FUSE bank offsets */
-#define IIM0_MAC 0x1a
-
#endif /* _IMX_REGS_H */
diff --git a/arch/arm/include/asm/arch-mx27/imx-regs.h b/arch/arm/include/asm/arch-mx27/imx-regs.h
index 6ecddaa..8f40aa7 100644
--- a/arch/arm/include/asm/arch-mx27/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx27/imx-regs.h
@@ -34,6 +34,7 @@ extern void mx27_uart_init_pins(void);
#ifdef CONFIG_FEC_MXC
extern void mx27_fec_init_pins(void);
+extern void imx_get_mac_from_fuse(unsigned char *mac);
#endif /* CONFIG_FEC_MXC */
#ifdef CONFIG_MXC_MMC
@@ -202,9 +203,19 @@ struct iim_regs {
u32 iim_scs1;
u32 iim_scs2;
u32 iim_scs3;
- u32 res[0x1F0];
- u32 iim_bank_area0[0x100];
+ u32 res[0x1f1];
+ struct fuse_bank {
+ u32 fuse_regs[0x20];
+ u32 fuse_rsvd[0xe0];
+ } bank[1];
};
+
+struct fuse_bank0_regs {
+ u32 fuse0_3[5];
+ u32 mac_addr[6];
+ u32 fuse10_31[0x16];
+};
+
#endif
#define IMX_IO_BASE 0x10000000
@@ -512,9 +523,4 @@ struct iim_regs {
#define IIM_ERR_SNSE (1 << 2)
#define IIM_ERR_PARITYE (1 << 1)
-/* Definitions for i.MX27 TO2 */
-#define IIM0_MAC 5
-#define IIM0_SCC_KEY 11
-#define IIM1_SUID 1
-
#endif /* _IMX_REGS_H */
diff --git a/arch/arm/include/asm/arch-mx5/imx-regs.h b/arch/arm/include/asm/arch-mx5/imx-regs.h
index 0b6249a..b45026d 100644
--- a/arch/arm/include/asm/arch-mx5/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx5/imx-regs.h
@@ -205,9 +205,13 @@
#define BOARD_REV_1_0 0x0
#define BOARD_REV_2_0 0x1
+#define IMX_IIM_BASE (IIM_BASE_ADDR)
+
#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
#include <asm/types.h>
+extern void imx_get_mac_from_fuse(unsigned char *mac);
+
#define __REG(x) (*((volatile u32 *)(x)))
#define __REG16(x) (*((volatile u16 *)(x)))
#define __REG8(x) (*((volatile u8 *)(x)))
@@ -275,6 +279,36 @@ struct src {
u32 sisr;
u32 simr;
};
+
+struct iim_regs {
+ u32 stat;
+ u32 statm;
+ u32 err;
+ u32 emask;
+ u32 fctl;
+ u32 ua;
+ u32 la;
+ u32 sdat;
+ u32 prev;
+ u32 srev;
+ u32 preg_p;
+ u32 scs0;
+ u32 scs1;
+ u32 scs2;
+ u32 scs3;
+ u32 res0[0x1f1];
+ struct fuse_bank {
+ u32 fuse_regs[0x20];
+ u32 fuse_rsvd[0xe0];
+ } bank[4];
+};
+
+struct fuse_bank1_regs {
+ u32 fuse0_8[9];
+ u32 mac_addr[6];
+ u32 fuse15_31[0x11];
+};
+
#endif /* __ASSEMBLER__*/
#endif /* __ASM_ARCH_MXC_MX51_H__ */
diff --git a/arch/arm/include/asm/global_data.h b/arch/arm/include/asm/global_data.h
index ada3fbb..2a84d27 100644
--- a/arch/arm/include/asm/global_data.h
+++ b/arch/arm/include/asm/global_data.h
@@ -55,11 +55,14 @@ typedef struct global_data {
unsigned long plla_rate_hz;
unsigned long pllb_rate_hz;
unsigned long at91_pllb_usb_init;
- /* "static data" needed by at91's timer.c */
+#endif
+#ifdef CONFIG_ARM
+ /* "static data" needed by most of timer.c on ARM platforms */
unsigned long timer_rate_hz;
unsigned long tbl;
unsigned long tbu;
unsigned long long timer_reset_value;
+ unsigned long lastinc;
#endif
unsigned long relocaddr; /* Start address of U-Boot in RAM */
phys_size_t ram_size; /* RAM size */
diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c
index 1fd5f83..96c0e30 100644
--- a/arch/arm/lib/board.c
+++ b/arch/arm/lib/board.c
@@ -276,7 +276,7 @@ void board_init_f (ulong bootflag)
ulong addr, addr_sp;
/* Pointer is writable since we allocated a register for it */
- gd = (gd_t *) (CONFIG_SYS_INIT_SP_ADDR);
+ gd = (gd_t *) ((CONFIG_SYS_INIT_SP_ADDR) & ~0x07);
/* compiler optimization barrier needed for GCC >= 3.4 */
__asm__ __volatile__("": : :"memory");
diff --git a/arch/powerpc/cpu/mpc83xx/pcie.c b/arch/powerpc/cpu/mpc83xx/pcie.c
index 1771c48..46a706d 100644
--- a/arch/powerpc/cpu/mpc83xx/pcie.c
+++ b/arch/powerpc/cpu/mpc83xx/pcie.c
@@ -201,18 +201,18 @@ static void mpc83xx_pcie_init_bus(int bus, struct pci_region *reg)
out_le32(&out_win->tarl, 0);
out_le32(&out_win->tarh, 0);
- for (i = 0; i < 2; i++, reg++) {
+ for (i = 0; i < 2; i++) {
u32 ar;
- if (reg->size == 0)
+ if (reg[i].size == 0)
break;
out_win = &pex->bridge.pex_outbound_win[i + 1];
- out_le32(&out_win->bar, reg->phys_start);
- out_le32(&out_win->tarl, reg->bus_start);
+ out_le32(&out_win->bar, reg[i].phys_start);
+ out_le32(&out_win->tarl, reg[i].bus_start);
out_le32(&out_win->tarh, 0);
- ar = PEX_OWAR_EN | (reg->size & PEX_OWAR_SIZE);
- if (reg->flags & PCI_REGION_IO)
+ ar = PEX_OWAR_EN | (reg[i].size & PEX_OWAR_SIZE);
+ if (reg[i].flags & PCI_REGION_IO)
ar |= PEX_OWAR_TYPE_IO;
else
ar |= PEX_OWAR_TYPE_MEM;
diff --git a/arch/powerpc/cpu/mpc83xx/start.S b/arch/powerpc/cpu/mpc83xx/start.S
index 515be4c..460ac9a 100644
--- a/arch/powerpc/cpu/mpc83xx/start.S
+++ b/arch/powerpc/cpu/mpc83xx/start.S
@@ -1158,6 +1158,10 @@ map_flash_by_law1:
bne 1b
stw r4, LBLAWAR1(r3) /* LBLAWAR1 <= 8MB Flash Size */
+ /* Wait for HW to catch up */
+ lwz r4, LBLAWAR1(r3)
+ twi 0,r4,0
+ isync
blr
/* Though all the LBIU Local Access Windows and LBC Banks will be
@@ -1196,5 +1200,9 @@ remap_flash_by_law0:
xor r4, r4, r4
stw r4, LBLAWBAR1(r3)
stw r4, LBLAWAR1(r3) /* Off LBIU LAW1 */
+ /* Wait for HW to catch up */
+ lwz r4, LBLAWAR1(r3)
+ twi 0,r4,0
+ isync
blr
#endif /* CONFIG_SYS_FLASHBOOT */
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index 27236a0..4b8faa5 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -327,7 +327,7 @@ int cpu_init_r(void)
if (l2cache->l2ctl & MPC85xx_L2CTL_L2E) {
puts("already enabled");
l2srbar = l2cache->l2srbar0;
-#ifdef CONFIG_SYS_INIT_L2_ADDR
+#if defined(CONFIG_SYS_INIT_L2_ADDR) && defined(CONFIG_SYS_FLASH_BASE)
if (l2cache->l2ctl & MPC85xx_L2CTL_L2SRAM_ENTIRE
&& l2srbar >= CONFIG_SYS_FLASH_BASE) {
l2srbar = CONFIG_SYS_INIT_L2_ADDR;
diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c
index b21c1d6..9759e23 100644
--- a/arch/powerpc/lib/board.c
+++ b/arch/powerpc/lib/board.c
@@ -645,6 +645,17 @@ void board_init_r (gd_t *id, ulong dest_addr)
gd->cpu += dest_addr - CONFIG_SYS_MONITOR_BASE;
#endif
+#ifdef CONFIG_SYS_EXTRA_ENV_RELOC
+ /*
+ * Some systems need to relocate the env_addr pointer early because the
+ * location it points to will get invalidated before env_relocate is
+ * called. One example is on systems that might use a L2 or L3 cache
+ * in SRAM mode and initialize that cache from SRAM mode back to being
+ * a cache in cpu_init_r.
+ */
+ gd->env_addr += dest_addr - CONFIG_SYS_MONITOR_BASE;
+#endif
+
#ifdef CONFIG_SERIAL_MULTI
serial_initialize();
#endif
diff --git a/arch/sh/cpu/sh2/start.S b/arch/sh/cpu/sh2/start.S
index 77043f6..8e0e640 100644
--- a/arch/sh/cpu/sh2/start.S
+++ b/arch/sh/cpu/sh2/start.S
@@ -26,7 +26,7 @@
.align 2
.global _start
-_start:
+_sh_start:
.long 0x00000010 /* Ppower ON reset PC*/
.long 0x00000000
.long 0x00000010 /* Manual reset PC */
@@ -39,7 +39,7 @@ _init:
nop
1: sts pr, r5
mov.l ._reloc_dst, r4
- add #(_start-1b), r5
+ add #(_sh_start-1b), r5
mov.l ._reloc_dst_end, r6
2: mov.l @r5+, r1
@@ -74,6 +74,6 @@ loop:
._reloc_dst_end: .long reloc_dst_end
._bss_start: .long bss_start
._bss_end: .long bss_end
-._gd_init: .long (_start - GENERATED_GBL_DATA_SIZE)
-._stack_init: .long (_start - GENERATED_GBL_DATA_SIZE - CONFIG_SYS_MALLOC_LEN - 16)
+._gd_init: .long (_sh_start - GENERATED_GBL_DATA_SIZE)
+._stack_init: .long (_sh_start - GENERATED_GBL_DATA_SIZE - CONFIG_SYS_MALLOC_LEN - 16)
._sh_generic_init: .long sh_generic_init
diff --git a/arch/sh/cpu/sh3/start.S b/arch/sh/cpu/sh3/start.S
index 9dd2303..d96ca91 100644
--- a/arch/sh/cpu/sh3/start.S
+++ b/arch/sh/cpu/sh3/start.S
@@ -29,7 +29,7 @@
.align 2
.global _start
-_start:
+_sh_start:
mov.l ._lowlevel_init, r0
100: bsrf r0
nop
@@ -38,7 +38,7 @@ _start:
nop
1: sts pr, r5
mov.l ._reloc_dst, r4
- add #(_start-1b), r5
+ add #(_sh_start-1b), r5
mov.l ._reloc_dst_end, r6
2: mov.l @r5+, r1
@@ -73,6 +73,6 @@ loop:
._reloc_dst_end: .long reloc_dst_end
._bss_start: .long bss_start
._bss_end: .long bss_end
-._gd_init: .long (_start - GENERATED_GBL_DATA_SIZE)
-._stack_init: .long (_start - GENERATED_GBL_DATA_SIZE - CONFIG_SYS_MALLOC_LEN - 16)
+._gd_init: .long (_sh_start - GENERATED_GBL_DATA_SIZE)
+._stack_init: .long (_sh_start - GENERATED_GBL_DATA_SIZE - CONFIG_SYS_MALLOC_LEN - 16)
._sh_generic_init: .long sh_generic_init
diff --git a/arch/sh/cpu/sh4/start.S b/arch/sh/cpu/sh4/start.S
index 4b5f606..a1d5ee4 100644
--- a/arch/sh/cpu/sh4/start.S
+++ b/arch/sh/cpu/sh4/start.S
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2007
+ * (C) Copyright 2007, 2010
* Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
*
* This program is free software; you can redistribute it and/or
@@ -26,7 +26,7 @@
.align 2
.global _start
-_start:
+_sh_start:
mov.l ._lowlevel_init, r0
100: bsrf r0
nop
@@ -35,7 +35,7 @@ _start:
nop
1: sts pr, r5
mov.l ._reloc_dst, r4
- add #(_start-1b), r5
+ add #(_sh_start-1b), r5
mov.l ._reloc_dst_end, r6
2: mov.l @r5+, r1
@@ -70,6 +70,6 @@ loop:
._reloc_dst_end: .long reloc_dst_end
._bss_start: .long bss_start
._bss_end: .long bss_end
-._gd_init: .long (_start - GENERATED_GBL_DATA_SIZE)
-._stack_init: .long (_start - GENERATED_GBL_DATA_SIZE - CONFIG_SYS_MALLOC_LEN - 16)
+._gd_init: .long (_sh_start - GENERATED_GBL_DATA_SIZE)
+._stack_init: .long (_sh_start - GENERATED_GBL_DATA_SIZE - CONFIG_SYS_MALLOC_LEN - 16)
._sh_generic_init: .long sh_generic_init
diff --git a/board/amcc/acadia/u-boot-nand.lds b/board/amcc/acadia/u-boot-nand.lds
index e256b19..c2a04c7 100644
--- a/board/amcc/acadia/u-boot-nand.lds
+++ b/board/amcc/acadia/u-boot-nand.lds
@@ -26,34 +26,12 @@ SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/powerpc/cpu/ppc4xx/start.o (.text)
+ arch/powerpc/cpu/ppc4xx/start.o (.text*)
/* Align to next NAND block */
. = ALIGN(0x4000);
@@ -61,8 +39,7 @@ SECTIONS
/* Keep some space here for redundant env and potential bad env blocks */
. = ALIGN(0x10000);
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
@@ -70,9 +47,6 @@ SECTIONS
{
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
@@ -80,23 +54,19 @@ SECTIONS
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
@@ -122,9 +92,8 @@ SECTIONS
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
diff --git a/board/amcc/kilauea/u-boot-nand.lds b/board/amcc/kilauea/u-boot-nand.lds
index e256b19..c2a04c7 100644
--- a/board/amcc/kilauea/u-boot-nand.lds
+++ b/board/amcc/kilauea/u-boot-nand.lds
@@ -26,34 +26,12 @@ SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/powerpc/cpu/ppc4xx/start.o (.text)
+ arch/powerpc/cpu/ppc4xx/start.o (.text*)
/* Align to next NAND block */
. = ALIGN(0x4000);
@@ -61,8 +39,7 @@ SECTIONS
/* Keep some space here for redundant env and potential bad env blocks */
. = ALIGN(0x10000);
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
@@ -70,9 +47,6 @@ SECTIONS
{
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
@@ -80,23 +54,19 @@ SECTIONS
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
@@ -122,9 +92,8 @@ SECTIONS
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
diff --git a/board/armltd/vexpress/ca9x4_ct_vxp.c b/board/armltd/vexpress/ca9x4_ct_vxp.c
index 48dfc8c..ce1be1e 100644
--- a/board/armltd/vexpress/ca9x4_ct_vxp.c
+++ b/board/armltd/vexpress/ca9x4_ct_vxp.c
@@ -95,16 +95,19 @@ static void flash__init(void)
int dram_init(void)
{
- gd->ram_size = get_ram_size(CONFIG_SYS_SDRAM_BASE, PHYS_SDRAM_1_SIZE);
+ gd->ram_size =
+ get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, PHYS_SDRAM_1_SIZE);
return 0;
}
void dram_init_banksize(void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = get_ram_size(PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
+ gd->bd->bi_dram[0].size =
+ get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
- gd->bd->bi_dram[1].size = get_ram_size(PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE);
+ gd->bd->bi_dram[1].size =
+ get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE);
}
int timer_init(void)
@@ -154,7 +157,7 @@ void reset_cpu(ulong addr)
* Delay x useconds AND perserve advance timstamp value
* assumes timer is ticking at 1 msec
*/
-void udelay(ulong usec)
+void __udelay(ulong usec)
{
ulong tmo, tmp;
diff --git a/board/armltd/vexpress/config.mk b/board/armltd/vexpress/config.mk
index 2d797d7..36395f2 100644
--- a/board/armltd/vexpress/config.mk
+++ b/board/armltd/vexpress/config.mk
@@ -19,5 +19,4 @@
#
# Linux-Kernel is expected to be at 0x60008000
#
-TEXT_BASE = 0x60800000
-LDSCRIPT := $(SRCTREE)/board/armltd/vexpress/u-boot.lds
+CONFIG_SYS_TEXT_BASE = 0x60800000
diff --git a/board/armltd/vexpress/u-boot.lds b/board/armltd/vexpress/u-boot.lds
deleted file mode 100644
index 5ac62f2..0000000
--- a/board/armltd/vexpress/u-boot.lds
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
- . = 0x00000000;
- . = ALIGN(4);
- .text :
- {
- arch/arm/cpu/armv7/start.o (.text)
- *(.text)
- }
-
- . = ALIGN(4);
- .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata))) }
-
- . = ALIGN(4);
- .data : { *(.data)
- __datarel_start = .;
- *(.data.rel)
- __datarelrolocal_start = .;
- *(.data.rel.ro.local)
- __datarellocal_start = .;
- *(.data.rel.local)
- __datarelro_start = .;
- *(.data.rel.ro)
- }
-
- __got_start = .;
- . = ALIGN(4);
- .got : { *(.got) }
- __got_end = .;
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
- . = ALIGN(4);
- __bss_start = .;
- .bss : { *(.bss) }
- _end = .;
-}
diff --git a/board/atmel/at91rm9200ek/config.mk b/board/atmel/at91rm9200ek/config.mk
deleted file mode 100644
index c7323fe..0000000
--- a/board/atmel/at91rm9200ek/config.mk
+++ /dev/null
@@ -1,2 +0,0 @@
-# currently only NOR flash booting is supported
-CONFIG_SYS_TEXT_BASE = 0x10000000
diff --git a/board/emk/top9000/Makefile b/board/emk/top9000/Makefile
new file mode 100644
index 0000000..9b28048
--- /dev/null
+++ b/board/emk/top9000/Makefile
@@ -0,0 +1,54 @@
+#
+# (C) Copyright 2003-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2010
+# Reinhard Meyer, EMK Elektronik, reinhard.meyer@emk-elektronik.de
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS-y += top9000.o
+COBJS-$(CONFIG_ATMEL_SPI) += spi.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS-y))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/emk/top9000/spi.c b/board/emk/top9000/spi.c
new file mode 100644
index 0000000..b468948
--- /dev/null
+++ b/board/emk/top9000/spi.c
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2010
+ * Reinhard Meyer, EMK Elektronik, reinhard.meyer@emk-elektronik.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/at91_spi.h>
+#include <asm/arch/gpio.h>
+#include <spi.h>
+
+static const struct {
+ u32 port;
+ u32 bit;
+} cs_to_portbit[2][4] = {
+ {{AT91_PIO_PORTA, 3}, {AT91_PIO_PORTC, 11},
+ {AT91_PIO_PORTC, 16}, {AT91_PIO_PORTC, 17} },
+ {{AT91_PIO_PORTB, 3}, {AT91_PIO_PORTC, 5},
+ {AT91_PIO_PORTC, 4}, {AT91_PIO_PORTC, 3} }
+};
+
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+ debug("spi_cs_is_valid: bus=%u cs=%u\n", bus, cs);
+ if (bus < 2 && cs < 4)
+ return 1;
+ return 0;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+ debug("spi_cs_activate: bus=%u cs=%u\n", slave->bus, slave->cs);
+ at91_set_pio_output(cs_to_portbit[slave->bus][slave->cs].port,
+ cs_to_portbit[slave->bus][slave->cs].bit, 0);
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+ debug("spi_cs_deactivate: bus=%u cs=%u\n", slave->bus, slave->cs);
+ at91_set_pio_output(cs_to_portbit[slave->bus][slave->cs].port,
+ cs_to_portbit[slave->bus][slave->cs].bit, 1);
+}
+
diff --git a/board/emk/top9000/top9000.c b/board/emk/top9000/top9000.c
new file mode 100644
index 0000000..b0fe2d6
--- /dev/null
+++ b/board/emk/top9000/top9000.c
@@ -0,0 +1,290 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * (C) Copyright 2010
+ * Reinhard Meyer, EMK Elektronik, reinhard.meyer@emk-elektronik.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <net.h>
+#include <netdev.h>
+#include <mmc.h>
+#include <i2c.h>
+#include <spi.h>
+#include <asm/arch/at91sam9260.h>
+#include <asm/arch/at91sam9260_matrix.h>
+#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/at91_shdwn.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+#include <asm/arch/hardware.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_CMD_NAND
+static void nand_hw_init(void)
+{
+ unsigned long csa;
+
+ /* Enable CS3 */
+ csa = at91_sys_read(AT91_MATRIX_EBICSA);
+ at91_sys_write(AT91_MATRIX_EBICSA,
+ csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
+
+ /* Configure SMC CS3 for NAND/SmartMedia */
+ at91_sys_write(AT91_SMC_SETUP(3),
+ AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) |
+ AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
+ at91_sys_write(AT91_SMC_PULSE(3),
+ AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) |
+ AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
+ at91_sys_write(AT91_SMC_CYCLE(3),
+ AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
+ at91_sys_write(AT91_SMC_MODE(3),
+ AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+ AT91_SMC_EXNWMODE_DISABLE |
+ AT91_SMC_DBW_8 |
+ AT91_SMC_TDF_(2));
+
+ /* Configure RDY/BSY */
+ at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+
+ /* Enable NandFlash */
+ at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+}
+#endif
+
+#ifdef CONFIG_MACB
+static void macb_hw_init(void)
+{
+ /* Enable EMAC clock */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_EMAC);
+
+ /* Initialize EMAC=MACB hardware */
+ at91_macb_hw_init();
+}
+#endif
+
+#ifdef CONFIG_GENERIC_ATMEL_MCI
+/* this is a weak define that we are overriding */
+int board_mmc_init(bd_t *bd)
+{
+ /* Enable MCI clock */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_MCI);
+
+ /* Initialize MCI hardware */
+ at91_mci_hw_init();
+
+ /* This calls the atmel_mmc_init in gen_atmel_mci.c */
+ return atmel_mci_init((void *)AT91_BASE_MCI);
+}
+
+/* this is a weak define that we are overriding */
+int board_mmc_getcd(u8 *cd, struct mmc *mmc)
+{
+ /*
+ * the only currently existing use of this function
+ * (fsl_esdhc.c) suggests this function must return
+ * *cs = TRUE if a card is NOT detected -> in most
+ * cases the value of the pin when the detect switch
+ * closes to GND
+ */
+ *cd = at91_get_gpio_value(CONFIG_SYS_MMC_CD_PIN) ? 1 : 0;
+ return 0;
+}
+
+#endif
+
+int board_early_init_f(void)
+{
+ at91_shdwn_t *shdwn = (at91_shdwn_t *)AT91_SHDWN_BASE;
+
+ /*
+ * make sure the board can be powered on by
+ * any transition on WKUP
+ */
+ writel(AT91_SHDW_MR_WKMODE0H2L | AT91_SHDW_MR_WKMODE0L2H,
+ &shdwn->mr);
+
+ /* Enable clocks for all PIOs */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOA);
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOB);
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOC);
+
+ /* set SCL0 and SDA0 to open drain */
+ at91_set_pio_output(I2C0_PORT, SCL0_PIN, 1);
+ at91_set_pio_multi_drive(I2C0_PORT, SCL0_PIN, 1);
+ at91_set_pio_pullup(I2C0_PORT, SCL0_PIN, 1);
+ at91_set_pio_output(I2C0_PORT, SDA0_PIN, 1);
+ at91_set_pio_multi_drive(I2C0_PORT, SDA0_PIN, 1);
+ at91_set_pio_pullup(I2C0_PORT, SDA0_PIN, 1);
+
+ /* set SCL1 and SDA1 to open drain */
+ at91_set_pio_output(I2C1_PORT, SCL1_PIN, 1);
+ at91_set_pio_multi_drive(I2C1_PORT, SCL1_PIN, 1);
+ at91_set_pio_pullup(I2C1_PORT, SCL1_PIN, 1);
+ at91_set_pio_output(I2C1_PORT, SDA1_PIN, 1);
+ at91_set_pio_multi_drive(I2C1_PORT, SDA1_PIN, 1);
+ at91_set_pio_pullup(I2C1_PORT, SDA1_PIN, 1);
+ return 0;
+}
+
+int board_init(void)
+{
+ /* arch number of TOP9000 Board */
+ gd->bd->bi_arch_number = MACH_TYPE_TOP9000;
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+ at91_serial_hw_init();
+#ifdef CONFIG_CMD_NAND
+ nand_hw_init();
+#endif
+#ifdef CONFIG_MACB
+ macb_hw_init();
+#endif
+#ifdef CONFIG_ATMEL_SPI0
+ /* (n+4) denotes to use nSPISEL(0) in GPIO mode! */
+ at91_spi0_hw_init(1 << (FRAM_CS_NUM + 4));
+#endif
+#ifdef CONFIG_ATMEL_SPI1
+ at91_spi1_hw_init(1 << (ENC_CS_NUM + 4));
+#endif
+ return 0;
+}
+
+#ifdef CONFIG_MISC_INIT_R
+int misc_init_r(void)
+{
+ /* read 'factory' part of EEPROM */
+ read_factory_r();
+ return 0;
+}
+#endif
+
+int dram_init(void)
+{
+ gd->ram_size = get_ram_size(
+ (void *)CONFIG_SYS_SDRAM_BASE,
+ CONFIG_SYS_SDRAM_SIZE);
+ return 0;
+}
+
+#ifdef CONFIG_RESET_PHY_R
+void reset_phy(void)
+{
+ /*
+ * Initialize ethernet HW addresses prior to starting Linux,
+ * needed for nfsroot.
+ * TODO: We need to investigate if that is really necessary.
+ */
+ eth_init(gd->bd);
+}
+#endif
+
+int board_eth_init(bd_t *bis)
+{
+ int rc = 0;
+ int num = 0;
+#ifdef CONFIG_MACB
+ rc = macb_eth_initialize(0,
+ (void *)AT91_EMAC_BASE,
+ CONFIG_SYS_PHY_ID);
+ if (!rc)
+ num++;
+#endif
+#ifdef CONFIG_ENC28J60
+ rc = enc28j60_initialize(ENC_SPI_BUS, ENC_CS_NUM,
+ ENC_SPI_CLOCK, SPI_MODE_0);
+ if (!rc)
+ num++;
+# ifdef CONFIG_ENC28J60_2
+ rc = enc28j60_initialize(ENC_SPI_BUS, ENC_CS_NUM+1,
+ ENC_SPI_CLOCK, SPI_MODE_0);
+ if (!rc)
+ num++;
+# ifdef CONFIG_ENC28J60_3
+ rc = enc28j60_initialize(ENC_SPI_BUS, ENC_CS_NUM+2,
+ ENC_SPI_CLOCK, SPI_MODE_0);
+ if (!rc)
+ num++;
+# endif
+# endif
+#endif
+ return num;
+}
+
+/*
+ * I2C access functions
+ *
+ * Note:
+ * We need to access Bus 0 before relocation to access the
+ * environment settings.
+ * However i2c_get_bus_num() cannot be called before
+ * relocation.
+ */
+#ifdef CONFIG_SOFT_I2C
+void iic_init(void)
+{
+ /* ports are now initialized in board_early_init_f() */
+}
+
+int iic_read(void)
+{
+ switch ((gd->flags & GD_FLG_RELOC) ? i2c_get_bus_num() : 0) {
+ case 0:
+ return at91_get_pio_value(I2C0_PORT, SDA0_PIN);
+ case 1:
+ return at91_get_pio_value(I2C1_PORT, SDA1_PIN);
+ }
+ return 1;
+}
+
+void iic_sda(int bit)
+{
+ switch ((gd->flags & GD_FLG_RELOC) ? i2c_get_bus_num() : 0) {
+ case 0:
+ at91_set_pio_value(I2C0_PORT, SDA0_PIN, bit);
+ break;
+ case 1:
+ at91_set_pio_value(I2C1_PORT, SDA1_PIN, bit);
+ break;
+ }
+}
+
+void iic_scl(int bit)
+{
+ switch ((gd->flags & GD_FLG_RELOC) ? i2c_get_bus_num() : 0) {
+ case 0:
+ at91_set_pio_value(I2C0_PORT, SCL0_PIN, bit);
+ break;
+ case 1:
+ at91_set_pio_value(I2C1_PORT, SCL1_PIN, bit);
+ break;
+ }
+}
+
+#endif
diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile
index 905dd7a..1abd3e5 100644
--- a/board/freescale/common/Makefile
+++ b/board/freescale/common/Makefile
@@ -31,7 +31,6 @@ LIB = $(obj)libfreescale.o
COBJS-$(CONFIG_FSL_CADMUS) += cadmus.o
COBJS-$(CONFIG_FSL_VIA) += cds_via.o
-COBJS-$(CONFIG_FSL_DIU_FB) += fsl_diu_fb.o
COBJS-$(CONFIG_FSL_PIXIS) += pixis.o
COBJS-$(CONFIG_FSL_NGPIXIS) += ngpixis.o
COBJS-$(CONFIG_PQ_MDS_PIB) += pq-mds-pib.o
diff --git a/board/freescale/mpc8641hpcn/mpc8641hpcn.c b/board/freescale/mpc8641hpcn/mpc8641hpcn.c
index 812111d..882ff0b 100644
--- a/board/freescale/mpc8641hpcn/mpc8641hpcn.c
+++ b/board/freescale/mpc8641hpcn/mpc8641hpcn.c
@@ -60,9 +60,6 @@ int checkboard(void)
return 0;
}
-const char *board_hwconfig = "foo:bar=baz";
-const char *cpu_hwconfig = "foo:bar=baz";
-
phys_size_t
initdram(int board_type)
{
diff --git a/board/freescale/p1022ds/diu.c b/board/freescale/p1022ds/diu.c
index 12b40a0..8f5305c 100644
--- a/board/freescale/p1022ds/diu.c
+++ b/board/freescale/p1022ds/diu.c
@@ -32,6 +32,7 @@
#define PMUXCR_ELBCDIU_MASK 0xc0000000
#define PMUXCR_ELBCDIU_NOR16 0x80000000
+#define PMUXCR_ELBCDIU_DIU 0x40000000
/*
* DIU Area Descriptor
@@ -131,9 +132,8 @@ int platform_diu_init(unsigned int *xres, unsigned int *yres)
px_brdcfg0 = in_8(lbc_lcs1_ba);
out_8(lbc_lcs1_ba, px_brdcfg0 | PX_BRDCFG0_ELBC_DIU);
- /* Setting PMUXCR to switch to DVI from ELBC */
- clrsetbits_be32(&gur->pmuxcr,
- PMUXCR_ELBCDIU_MASK, PMUXCR_ELBCDIU_NOR16);
+ /* Set PMUXCR to switch the muxed pins from the LBC to the DIU */
+ clrsetbits_be32(&gur->pmuxcr, PMUXCR_ELBCDIU_MASK, PMUXCR_ELBCDIU_DIU);
pmuxcr = in_be32(&gur->pmuxcr);
return fsl_diu_init(*xres, pixel_format, 0);
@@ -161,7 +161,7 @@ static int set_mux_to_lbc(void)
ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
/* Switch the muxes only if they're currently set to DIU mode */
- if ((in_be32(&gur->pmuxcr) & PMUXCR_ELBCDIU_MASK) ==
+ if ((in_be32(&gur->pmuxcr) & PMUXCR_ELBCDIU_MASK) !=
PMUXCR_ELBCDIU_NOR16) {
/*
* In DIU mode, the PIXIS can only be accessed indirectly
@@ -216,8 +216,17 @@ void flash_write8(u8 value, void *addr)
int sw = set_mux_to_lbc();
__raw_writeb(value, addr);
- if (sw)
+ if (sw) {
+ /*
+ * To ensure the post-write is completed to eLBC, software must
+ * perform a dummy read from one valid address from eLBC space
+ * before changing the eLBC_DIU from NOR mode to DIU mode.
+ * set_mux_to_diu() includes a sync that will ensure the
+ * __raw_readb() completes before it switches the mux.
+ */
+ __raw_readb(addr);
set_mux_to_diu();
+ }
}
void flash_write16(u16 value, void *addr)
@@ -225,8 +234,17 @@ void flash_write16(u16 value, void *addr)
int sw = set_mux_to_lbc();
__raw_writew(value, addr);
- if (sw)
+ if (sw) {
+ /*
+ * To ensure the post-write is completed to eLBC, software must
+ * perform a dummy read from one valid address from eLBC space
+ * before changing the eLBC_DIU from NOR mode to DIU mode.
+ * set_mux_to_diu() includes a sync that will ensure the
+ * __raw_readb() completes before it switches the mux.
+ */
+ __raw_readb(addr);
set_mux_to_diu();
+ }
}
void flash_write32(u32 value, void *addr)
@@ -234,18 +252,47 @@ void flash_write32(u32 value, void *addr)
int sw = set_mux_to_lbc();
__raw_writel(value, addr);
- if (sw)
+ if (sw) {
+ /*
+ * To ensure the post-write is completed to eLBC, software must
+ * perform a dummy read from one valid address from eLBC space
+ * before changing the eLBC_DIU from NOR mode to DIU mode.
+ * set_mux_to_diu() includes a sync that will ensure the
+ * __raw_readb() completes before it switches the mux.
+ */
+ __raw_readb(addr);
set_mux_to_diu();
+ }
}
void flash_write64(u64 value, void *addr)
{
int sw = set_mux_to_lbc();
+ uint32_t *p = addr;
- /* There is no __raw_writeq(), so do the write manually */
- *(volatile u64 *)addr = value;
- if (sw)
+ /*
+ * There is no __raw_writeq(), so do the write manually. We don't trust
+ * the compiler, so we use inline assembly.
+ */
+ __asm__ __volatile__(
+ "stw%U0%X0 %2,%0;\n"
+ "stw%U1%X1 %3,%1;\n"
+ : "=m" (*p), "=m" (*(p + 1))
+ : "r" ((uint32_t) (value >> 32)), "r" ((uint32_t) (value)));
+
+ if (sw) {
+ /*
+ * To ensure the post-write is completed to eLBC, software must
+ * perform a dummy read from one valid address from eLBC space
+ * before changing the eLBC_DIU from NOR mode to DIU mode. We
+ * read addr+4 because we just wrote to addr+4, so that's how we
+ * maintain execution order. set_mux_to_diu() includes a sync
+ * that will ensure the __raw_readb() completes before it
+ * switches the mux.
+ */
+ __raw_readb(addr + 4);
set_mux_to_diu();
+ }
}
u8 flash_read8(void *addr)
diff --git a/board/freescale/p2020ds/p2020ds.c b/board/freescale/p2020ds/p2020ds.c
index b507677..b05ef98 100644
--- a/board/freescale/p2020ds/p2020ds.c
+++ b/board/freescale/p2020ds/p2020ds.c
@@ -69,9 +69,6 @@ int checkboard(void)
return 0;
}
-const char *board_hwconfig = "foo:bar=baz";
-const char *cpu_hwconfig = "foo:bar=baz";
-
phys_size_t initdram(int board_type)
{
phys_size_t dram_size = 0;
diff --git a/board/logicpd/am3517evm/config.mk b/board/logicpd/am3517evm/config.mk
index 102d32b..71ec5d0 100644
--- a/board/logicpd/am3517evm/config.mk
+++ b/board/logicpd/am3517evm/config.mk
@@ -27,4 +27,4 @@
# (mem base + reserved)
# For use with external or internal boots.
-CONFIG_SYS_TEXT_BASE = 0x80e80000
+CONFIG_SYS_TEXT_BASE = 0x80008000
diff --git a/board/logicpd/zoom1/config.mk b/board/logicpd/zoom1/config.mk
index 39a94dc..e89de31 100644
--- a/board/logicpd/zoom1/config.mk
+++ b/board/logicpd/zoom1/config.mk
@@ -30,4 +30,4 @@
# (mem base + reserved)
# For use with external or internal boots.
-CONFIG_SYS_TEXT_BASE = 0x80e80000
+CONFIG_SYS_TEXT_BASE = 0x80008000
diff --git a/board/logicpd/zoom2/config.mk b/board/logicpd/zoom2/config.mk
index 8a8adc7..9f3f57d 100644
--- a/board/logicpd/zoom2/config.mk
+++ b/board/logicpd/zoom2/config.mk
@@ -30,4 +30,4 @@
# (mem base + reserved)
# For use with external or internal boots.
-CONFIG_SYS_TEXT_BASE = 0x80e80000
+CONFIG_SYS_TEXT_BASE = 0x80008000
diff --git a/board/ronetix/pm9261/config.mk b/board/ronetix/pm9261/config.mk
deleted file mode 100644
index 975522a..0000000
--- a/board/ronetix/pm9261/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x23f00000 \ No newline at end of file
diff --git a/board/ronetix/pm9261/pm9261.c b/board/ronetix/pm9261/pm9261.c
index 53d8c48..e0f44dd 100644
--- a/board/ronetix/pm9261/pm9261.c
+++ b/board/ronetix/pm9261/pm9261.c
@@ -281,9 +281,16 @@ int board_eth_init(bd_t *bis)
int dram_init(void)
{
+ /* dram_init must store complete ramsize in gd->ram_size */
+ gd->ram_size = get_ram_size((volatile void *)PHYS_SDRAM,
+ PHYS_SDRAM_SIZE);
+ return 0;
+}
+
+void dram_init_banksize(void)
+{
gd->bd->bi_dram[0].start = PHYS_SDRAM;
gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
- return 0;
}
#ifdef CONFIG_RESET_PHY_R
diff --git a/board/ronetix/pm9263/config.mk b/board/ronetix/pm9263/config.mk
deleted file mode 100644
index e554a45..0000000
--- a/board/ronetix/pm9263/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x23f00000
diff --git a/board/ronetix/pm9263/pm9263.c b/board/ronetix/pm9263/pm9263.c
index 4dc0237..ec9f865 100644
--- a/board/ronetix/pm9263/pm9263.c
+++ b/board/ronetix/pm9263/pm9263.c
@@ -378,9 +378,16 @@ int board_init(void)
int dram_init(void)
{
+ /* dram_init must store complete ramsize in gd->ram_size */
+ gd->ram_size = get_ram_size((volatile void *)PHYS_SDRAM,
+ PHYS_SDRAM_SIZE);
+ return 0;
+}
+
+void dram_init_banksize(void)
+{
gd->bd->bi_dram[0].start = PHYS_SDRAM;
gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
- return 0;
}
#ifdef CONFIG_RESET_PHY_R
diff --git a/board/ronetix/pm9g45/config.mk b/board/ronetix/pm9g45/config.mk
deleted file mode 100644
index 9d3c5ae..0000000
--- a/board/ronetix/pm9g45/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x73f00000
diff --git a/board/ronetix/pm9g45/pm9g45.c b/board/ronetix/pm9g45/pm9g45.c
index f3d48f2..79b7c9d 100644
--- a/board/ronetix/pm9g45/pm9g45.c
+++ b/board/ronetix/pm9g45/pm9g45.c
@@ -159,9 +159,16 @@ int board_init(void)
int dram_init(void)
{
+ /* dram_init must store complete ramsize in gd->ram_size */
+ gd->ram_size = get_ram_size((volatile void *)PHYS_SDRAM,
+ PHYS_SDRAM_SIZE);
+ return 0;
+}
+
+void dram_init_banksize(void)
+{
gd->bd->bi_dram[0].start = PHYS_SDRAM;
gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
- return 0;
}
#ifdef CONFIG_RESET_PHY_R
diff --git a/board/samsung/goni/goni.c b/board/samsung/goni/goni.c
index 0b09eba..581935d 100644
--- a/board/samsung/goni/goni.c
+++ b/board/samsung/goni/goni.c
@@ -43,14 +43,20 @@ int board_init(void)
int dram_init(void)
{
+ gd->ram_size = PHYS_SDRAM_1_SIZE + PHYS_SDRAM_2_SIZE +
+ PHYS_SDRAM_3_SIZE;
+
+ return 0;
+}
+
+void dram_init_banksize(void)
+{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE;
-
- return 0;
}
#ifdef CONFIG_DISPLAY_BOARDINFO
diff --git a/board/samsung/smdkc100/smdkc100.c b/board/samsung/smdkc100/smdkc100.c
index 31e8d9e..d3189f6 100644
--- a/board/samsung/smdkc100/smdkc100.c
+++ b/board/samsung/smdkc100/smdkc100.c
@@ -65,13 +65,17 @@ int board_init(void)
int dram_init(void)
{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1,
- PHYS_SDRAM_1_SIZE);
+ gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
return 0;
}
+void dram_init_banksize(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+}
+
#ifdef CONFIG_DISPLAY_BOARDINFO
int checkboard(void)
{
diff --git a/board/ti/sdp3430/config.mk b/board/ti/sdp3430/config.mk
index 2ca03dd..be46298 100644
--- a/board/ti/sdp3430/config.mk
+++ b/board/ti/sdp3430/config.mk
@@ -30,4 +30,4 @@
# (mem base + reserved)
# For use with external or internal boots.
-CONFIG_SYS_TEXT_BASE = 0x80e80000
+CONFIG_SYS_TEXT_BASE = 0x80008000
diff --git a/boards.cfg b/boards.cfg
index 6258eb2..939a82d 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -48,7 +48,8 @@ lpc2292sodimm arm arm720t - -
SMN42 arm arm720t - siemens lpc2292
evb4510 arm arm720t - - s3c4510b
a320evb arm arm920t - faraday a320
-at91rm9200ek arm arm920t - atmel at91
+at91rm9200ek arm arm920t at91rm9200ek atmel at91 at91rm9200ek
+at91rm9200ek_ram arm arm920t at91rm9200ek atmel at91 at91rm9200ek:RAMBOOT
eb_cpux9k2 arm arm920t - BuS at91
cmc_pu2 arm arm920t - - at91rm9200
csb637 arm arm920t - - at91rm9200
@@ -70,6 +71,8 @@ voiceblue arm arm925t
omap1510inn arm arm925t - ti
afeb9260 arm arm926ejs - - at91
at91cap9adk arm arm926ejs - atmel at91
+top9000eval_xe arm arm926ejs top9000 emk at91 top9000:EVAL9000
+top9000su_xe arm arm926ejs top9000 emk at91 top9000:SU9000
meesc arm arm926ejs - esd at91
otc570 arm arm926ejs - esd at91
pm9261 arm arm926ejs - ronetix at91
@@ -407,10 +410,10 @@ vme8349 powerpc mpc83xx vme8349 esd
MPC8308RDB powerpc mpc83xx mpc8308rdb freescale
MPC8313ERDB_33 powerpc mpc83xx mpc8313erdb freescale - MPC8313ERDB:SYS_33MHZ
MPC8313ERDB_66 powerpc mpc83xx mpc8313erdb freescale - MPC8313ERDB:SYS_66MHZ
-MPC8313ERDB_NAND_33 powerpc mpc83xx mpc8313erdb freescale - MPC8313ERDB:SYS_33MHZ,NAND_U_BOOT,SYS_TEXT_BASE=0x00100000
-MPC8313ERDB_NAND_66 powerpc mpc83xx mpc8313erdb freescale - MPC8313ERDB:SYS_66MHZ,NAND_U_BOOT,SYS_TEXT_BASE=0x00100000
+MPC8313ERDB_NAND_33 powerpc mpc83xx mpc8313erdb freescale - MPC8313ERDB:SYS_33MHZ,NAND_U_BOOT
+MPC8313ERDB_NAND_66 powerpc mpc83xx mpc8313erdb freescale - MPC8313ERDB:SYS_66MHZ,NAND_U_BOOT
MPC8315ERDB powerpc mpc83xx mpc8315erdb freescale - MPC8315ERDB
-MPC8315ERDB_NAND powerpc mpc83xx mpc8315erdb freescale - MPC8315ERDB:NAND
+MPC8315ERDB_NAND powerpc mpc83xx mpc8315erdb freescale - MPC8315ERDB:NAND_U_BOOT
MPC8323ERDB powerpc mpc83xx mpc8323erdb freescale
MPC832XEMDS powerpc mpc83xx mpc832xemds freescale - MPC832XEMDS:
MPC832XEMDS_ATM powerpc mpc83xx mpc832xemds freescale - MPC832XEMDS:PQ_MDS_PIB=1,PQ_MDS_PIB_ATM=1
diff --git a/common/cmd_onenand.c b/common/cmd_onenand.c
index 33108f1..cb2ba70 100644
--- a/common/cmd_onenand.c
+++ b/common/cmd_onenand.c
@@ -293,7 +293,7 @@ static int onenand_dump(struct mtd_info *mtd, ulong off, int only_oob)
addr = (loff_t) off;
memset(&ops, 0, sizeof(ops));
ops.datbuf = datbuf;
- ops.oobbuf = oobbuf; /* must exist, but oob data will be appended to ops.datbuf */
+ ops.oobbuf = oobbuf;
ops.len = mtd->writesize;
ops.ooblen = mtd->oobsize;
ops.retlen = 0;
@@ -319,6 +319,8 @@ static int onenand_dump(struct mtd_info *mtd, ulong off, int only_oob)
}
puts("OOB:\n");
i = mtd->oobsize >> 3;
+ p = oobbuf;
+
while (i--) {
printf("\t%02x %02x %02x %02x %02x %02x %02x %02x\n",
p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7]);
diff --git a/common/cmd_ubi.c b/common/cmd_ubi.c
index 7692ac7..b486ca8 100644
--- a/common/cmd_ubi.c
+++ b/common/cmd_ubi.c
@@ -42,6 +42,11 @@ struct selected_dev {
static struct selected_dev ubi_dev;
+#ifdef CONFIG_CMD_UBIFS
+int ubifs_is_mounted(void);
+void cmd_ubifs_umount(void);
+#endif
+
static void ubi_dump_vol_info(const struct ubi_volume *vol)
{
ubi_msg("volume information dump:");
@@ -472,6 +477,16 @@ static int do_ubi(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
if (argc < 3)
return cmd_usage(cmdtp);
+#ifdef CONFIG_CMD_UBIFS
+ /*
+ * Automatically unmount UBIFS partition when user
+ * changes the UBI device. Otherwise the following
+ * UBIFS commands will crash.
+ */
+ if (ubifs_is_mounted())
+ cmd_ubifs_umount();
+#endif
+
/* todo: get dev number for NAND... */
ubi_dev.nr = 0;
diff --git a/common/cmd_ubifs.c b/common/cmd_ubifs.c
index a0ec184..3cd2d8f 100644
--- a/common/cmd_ubifs.c
+++ b/common/cmd_ubifs.c
@@ -33,12 +33,17 @@
#include <config.h>
#include <command.h>
+#include "../fs/ubifs/ubifs.h"
+
static int ubifs_initialized;
static int ubifs_mounted;
+extern struct super_block *ubifs_sb;
+
/* Prototypes */
int ubifs_init(void);
int ubifs_mount(char *vol_name);
+void ubifs_umount(struct ubifs_info *c);
int ubifs_ls(char *dir_name);
int ubifs_load(char *filename, u32 addr, u32 size);
@@ -67,13 +72,47 @@ int do_ubifs_mount(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
return 0;
}
+int ubifs_is_mounted(void)
+{
+ return ubifs_mounted;
+}
+
+void cmd_ubifs_umount(void)
+{
+
+ if (ubifs_sb) {
+ printf("Unmounting UBIFS volume %s!\n",
+ ((struct ubifs_info *)(ubifs_sb->s_fs_info))->vi.name);
+ ubifs_umount(ubifs_sb->s_fs_info);
+ }
+
+ ubifs_sb = NULL;
+ ubifs_mounted = 0;
+ ubifs_initialized = 0;
+}
+
+int do_ubifs_umount(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ if (argc != 1)
+ return cmd_usage(cmdtp);
+
+ if (ubifs_initialized == 0) {
+ printf("No UBIFS volume mounted!\n");
+ return -1;
+ }
+
+ cmd_ubifs_umount();
+
+ return 0;
+}
+
int do_ubifs_ls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
char *filename = "/";
int ret;
if (!ubifs_mounted) {
- printf("UBIFS not mounted, use ubifs mount to mount volume first!\n");
+ printf("UBIFS not mounted, use ubifsmount to mount volume first!\n");
return -1;
}
@@ -132,6 +171,12 @@ U_BOOT_CMD(
);
U_BOOT_CMD(
+ ubifsumount, 1, 0, do_ubifs_umount,
+ "unmount UBIFS volume",
+ " - unmount current volume"
+);
+
+U_BOOT_CMD(
ubifsls, 2, 0, do_ubifs_ls,
"list files in a directory",
"[directory]\n"
diff --git a/common/env_nand.c b/common/env_nand.c
index 4e8307a..7f6c917 100644
--- a/common/env_nand.c
+++ b/common/env_nand.c
@@ -297,7 +297,7 @@ int readenv(size_t offset, u_char * buf)
offset += blocksize;
} else {
char_ptr = &buf[amount_loaded];
- if (nand_read(&nand_info[0], offset, &len, char_ptr))
+ if (nand_read_skip_bad(&nand_info[0], offset, &len, char_ptr))
return 1;
offset += blocksize;
amount_loaded += len;
diff --git a/common/hwconfig.c b/common/hwconfig.c
index 3c9759f..193863a 100644
--- a/common/hwconfig.c
+++ b/common/hwconfig.c
@@ -68,14 +68,14 @@ next:
return NULL;
}
-const char *cpu_hwconfig __attribute__((weak));
-const char *board_hwconfig __attribute__((weak));
+const char cpu_hwconfig[] __attribute__((weak)) = "";
+const char board_hwconfig[] __attribute__((weak)) = "";
#define HWCONFIG_PRE_RELOC_BUF_SIZE 128
static const char *__hwconfig(const char *opt, size_t *arglen)
{
- const char *env_hwconfig = NULL;
+ const char *env_hwconfig = NULL, *ret;
char buf[HWCONFIG_PRE_RELOC_BUF_SIZE];
if (gd->flags & GD_FLG_ENV_READY) {
@@ -92,19 +92,20 @@ static const char *__hwconfig(const char *opt, size_t *arglen)
env_hwconfig = buf;
}
- if (env_hwconfig)
- return hwconfig_parse(env_hwconfig, strlen(env_hwconfig),
+ if (env_hwconfig) {
+ ret = hwconfig_parse(env_hwconfig, strlen(env_hwconfig),
opt, ";", ':', arglen);
+ if (ret)
+ return ret;
+ }
- if (board_hwconfig)
- return hwconfig_parse(board_hwconfig, strlen(board_hwconfig),
- opt, ";", ':', arglen);
+ ret = hwconfig_parse(board_hwconfig, strlen(board_hwconfig),
+ opt, ";", ':', arglen);
+ if (ret)
+ return ret;
- if (cpu_hwconfig)
- return hwconfig_parse(cpu_hwconfig, strlen(cpu_hwconfig),
- opt, ";", ':', arglen);
-
- return NULL;
+ return hwconfig_parse(cpu_hwconfig, strlen(cpu_hwconfig),
+ opt, ";", ':', arglen);
}
/*
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index a368fe6..57cd4ee 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -384,10 +384,6 @@ static int esdhc_init(struct mmc *mmc)
int ret = 0;
u8 card_absent;
- /* Enable cache snooping */
- if (cfg && !cfg->no_snoop)
- esdhc_write32(&regs->scr, 0x00000040);
-
/* Reset the entire host controller */
esdhc_write32(&regs->sysctl, SYSCTL_RSTA);
@@ -395,6 +391,10 @@ static int esdhc_init(struct mmc *mmc)
while ((esdhc_read32(&regs->sysctl) & SYSCTL_RSTA) && --timeout)
udelay(1000);
+ /* Enable cache snooping */
+ if (cfg && !cfg->no_snoop)
+ esdhc_write32(&regs->scr, 0x00000040);
+
esdhc_write32(&regs->sysctl, SYSCTL_HCKEN | SYSCTL_IPGEN);
/* Set the initial clock speed */
diff --git a/drivers/mmc/gen_atmel_mci.c b/drivers/mmc/gen_atmel_mci.c
index fa4df99..2984d64 100644
--- a/drivers/mmc/gen_atmel_mci.c
+++ b/drivers/mmc/gen_atmel_mci.c
@@ -308,6 +308,7 @@ static int mci_init(struct mmc *mmc)
writel(MMCI_BIT(SWRST), &mci->cr); /* soft reset */
writel(MMCI_BIT(PWSDIS), &mci->cr); /* disable power save */
writel(MMCI_BIT(MCIEN), &mci->cr); /* enable mci */
+ writel(MMCI_BF(SCDSEL, MCI_BUS), &mci->sdcr); /* select port */
/* Initial Time-outs */
writel(0x5f, &mci->dtor);
diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c
index 7cb99cb..c33e278 100644
--- a/drivers/mtd/nand/fsl_upm.c
+++ b/drivers/mtd/nand/fsl_upm.c
@@ -21,6 +21,7 @@
static void fsl_upm_start_pattern(struct fsl_upm *upm, u32 pat_offset)
{
clrsetbits_be32(upm->mxmr, MxMR_MAD_MSK, MxMR_OP_RUNP | pat_offset);
+ (void)in_be32(upm->mxmr);
}
static void fsl_upm_end_pattern(struct fsl_upm *upm)
@@ -35,6 +36,7 @@ static void fsl_upm_run_pattern(struct fsl_upm *upm, int width,
void __iomem *io_addr, u32 mar)
{
out_be32(upm->mar, mar);
+ (void)in_be32(upm->mar);
switch (width) {
case 8:
out_8(io_addr, 0x0);
diff --git a/drivers/mtd/nand/s3c2410_nand.c b/drivers/mtd/nand/s3c2410_nand.c
index f70daef..27351fb 100644
--- a/drivers/mtd/nand/s3c2410_nand.c
+++ b/drivers/mtd/nand/s3c2410_nand.c
@@ -133,9 +133,15 @@ int board_nand_init(struct nand_chip *nand)
writel(readl(&clk_power->clkcon) | (1 << 4), &clk_power->clkcon);
/* initialize hardware */
- twrph0 = 3;
- twrph1 = 0;
- tacls = 0;
+#if defined(CONFIG_S3C24XX_CUSTOM_NAND_TIMING)
+ tacls = CONFIG_S3C24XX_TACLS;
+ twrph0 = CONFIG_S3C24XX_TWRPH0;
+ twrph1 = CONFIG_S3C24XX_TWRPH1;
+#else
+ tacls = 4;
+ twrph0 = 8;
+ twrph1 = 8;
+#endif
cfg = S3C2410_NFCONF_EN;
cfg |= S3C2410_NFCONF_TACLS(tacls - 1);
diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index c17f937..0d0f392 100644
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -312,21 +312,8 @@ static void fec_rbd_clean(int last, struct fec_bd *pRbd)
static int fec_get_hwaddr(struct eth_device *dev, unsigned char *mac)
{
-/*
- * The MX27 can store the mac address in internal eeprom
- * This mechanism is not supported now by MX51 or MX25
- */
-#if defined(CONFIG_MX51) || defined(CONFIG_MX25)
- return -1;
-#else
- struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE;
- int i;
-
- for (i = 0; i < 6; i++)
- mac[6-1-i] = readl(&iim->iim_bank_area0[IIM0_MAC + i]);
-
+ imx_get_mac_from_fuse(mac);
return !is_valid_ether_addr(mac);
-#endif
}
static int fec_set_hwaddr(struct eth_device *dev)
@@ -754,7 +741,7 @@ static int fec_probe(bd_t *bd)
eth_register(edev);
if (fec_get_hwaddr(edev, ethaddr) == 0) {
- printf("got MAC address from EEPROM: %pM\n", ethaddr);
+ printf("got MAC address from fuse: %pM\n", ethaddr);
memcpy(edev->enetaddr, ethaddr, 6);
}
diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c
index 9b5dd92..77908d1 100644
--- a/drivers/net/tsec.c
+++ b/drivers/net/tsec.c
@@ -5,7 +5,7 @@
* terms of the GNU Public License, Version 2, incorporated
* herein by reference.
*
- * Copyright 2004-2009 Freescale Semiconductor, Inc.
+ * Copyright 2004-2010 Freescale Semiconductor, Inc.
* (C) Copyright 2003, Motorola, Inc.
* author Andy Fleming
*
@@ -292,13 +292,12 @@ static uint tsec_local_mdio_read(volatile tsec_mdio_t *phyregs,
/* By default force the TBI PHY into 1000Mbps full duplex when in SGMII mode */
#ifndef CONFIG_TSEC_TBICR_SETTINGS
-#define TBICR_SETTINGS ( \
+#define CONFIG_TSEC_TBICR_SETTINGS ( \
TBICR_PHY_RESET \
+ | TBICR_ANEG_ENABLE \
| TBICR_FULL_DUPLEX \
| TBICR_SPEED1_SET \
)
-#else
-#define TBICR_SETTINGS CONFIG_TSEC_TBICR_SETTINGS
#endif /* CONFIG_TSEC_TBICR_SETTINGS */
/* Configure the TBI for SGMII operation */
@@ -311,7 +310,7 @@ static void tsec_configure_serdes(struct tsec_private *priv)
tsec_local_mdio_write(priv->phyregs_sgmii, priv->regs->tbipa, TBI_TBICON,
TBICON_CLK_SELECT);
tsec_local_mdio_write(priv->phyregs_sgmii, priv->regs->tbipa, TBI_CR,
- TBICR_SETTINGS);
+ CONFIG_TSEC_TBICR_SETTINGS);
}
/* Discover which PHY is attached to the device, and configure it
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 83274c3..2c53a6f 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -28,6 +28,7 @@ LIB := $(obj)libvideo.o
COBJS-$(CONFIG_ATI_RADEON_FB) += ati_radeon_fb.o videomodes.o
COBJS-$(CONFIG_ATMEL_LCD) += atmel_lcdfb.o
COBJS-$(CONFIG_CFB_CONSOLE) += cfb_console.o
+COBJS-$(CONFIG_FSL_DIU_FB) += fsl_diu_fb.o
COBJS-$(CONFIG_S6E63D6) += s6e63d6.o
COBJS-$(CONFIG_VIDEO_AMBA) += amba.o
COBJS-$(CONFIG_VIDEO_CT69000) += ct69000.o videomodes.o
diff --git a/board/freescale/common/fsl_diu_fb.c b/drivers/video/fsl_diu_fb.c
index 35ed938..35ed938 100644
--- a/board/freescale/common/fsl_diu_fb.c
+++ b/drivers/video/fsl_diu_fb.c
diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c
index 39e3efe..63b2164 100644
--- a/fs/ubifs/super.c
+++ b/fs/ubifs/super.c
@@ -824,7 +824,7 @@ out_free:
* through mounting (error path cleanup function). So it has to make sure the
* resource was actually allocated before freeing it.
*/
-static void ubifs_umount(struct ubifs_info *c)
+void ubifs_umount(struct ubifs_info *c)
{
dbg_gen("un-mounting UBI device %d, volume %d", c->vi.ubi_num,
c->vi.vol_id);
diff --git a/fs/ubifs/ubifs.c b/fs/ubifs/ubifs.c
index 1cc31a9..5a5c739 100644
--- a/fs/ubifs/ubifs.c
+++ b/fs/ubifs/ubifs.c
@@ -3,7 +3,7 @@
*
* Copyright (C) 2006-2008 Nokia Corporation.
*
- * (C) Copyright 2008-2009
+ * (C) Copyright 2008-2010
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* This program is free software; you can redistribute it and/or modify it
@@ -384,6 +384,7 @@ static unsigned long ubifs_findfile(struct super_block *sb, char *filename)
unsigned long root_inum = 1;
unsigned long inum;
int symlink_count = 0; /* Don't allow symlink recursion */
+ char link_name[64];
strcpy(fpath, filename);
@@ -420,7 +421,6 @@ static unsigned long ubifs_findfile(struct super_block *sb, char *filename)
ui = ubifs_inode(inode);
if ((inode->i_mode & S_IFMT) == S_IFLNK) {
- char link_name[64];
char buf[128];
/* We have some sort of symlink recursion, bail out */
@@ -567,7 +567,8 @@ dump:
return -EINVAL;
}
-static int do_readpage(struct ubifs_info *c, struct inode *inode, struct page *page)
+static int do_readpage(struct ubifs_info *c, struct inode *inode,
+ struct page *page, int last_block_size)
{
void *addr;
int err = 0, i;
@@ -601,17 +602,54 @@ static int do_readpage(struct ubifs_info *c, struct inode *inode, struct page *p
err = -ENOENT;
memset(addr, 0, UBIFS_BLOCK_SIZE);
} else {
- ret = read_block(inode, addr, block, dn);
- if (ret) {
- err = ret;
- if (err != -ENOENT)
+ /*
+ * Reading last block? Make sure to not write beyond
+ * the requested size in the destination buffer.
+ */
+ if (((block + 1) == beyond) || last_block_size) {
+ void *buff;
+ int dlen;
+
+ /*
+ * We need to buffer the data locally for the
+ * last block. This is to not pad the
+ * destination area to a multiple of
+ * UBIFS_BLOCK_SIZE.
+ */
+ buff = malloc(UBIFS_BLOCK_SIZE);
+ if (!buff) {
+ printf("%s: Error, malloc fails!\n",
+ __func__);
+ err = -ENOMEM;
break;
- } else if (block + 1 == beyond) {
- int dlen = le32_to_cpu(dn->size);
- int ilen = i_size & (UBIFS_BLOCK_SIZE - 1);
-
- if (ilen && ilen < dlen)
- memset(addr + ilen, 0, dlen - ilen);
+ }
+
+ /* Read block-size into temp buffer */
+ ret = read_block(inode, buff, block, dn);
+ if (ret) {
+ err = ret;
+ if (err != -ENOENT) {
+ free(buff);
+ break;
+ }
+ }
+
+ if (last_block_size)
+ dlen = last_block_size;
+ else
+ dlen = le32_to_cpu(dn->size);
+
+ /* Now copy required size back to dest */
+ memcpy(addr, buff, dlen);
+
+ free(buff);
+ } else {
+ ret = read_block(inode, addr, block, dn);
+ if (ret) {
+ err = ret;
+ if (err != -ENOENT)
+ break;
+ }
}
}
if (++i >= UBIFS_BLOCKS_PER_PAGE)
@@ -649,6 +687,7 @@ int ubifs_load(char *filename, u32 addr, u32 size)
int err = 0;
int i;
int count;
+ int last_block_size = 0;
c->ubi = ubi_open_volume(c->vi.ubi_num, c->vi.vol_id, UBI_READONLY);
/* ubifs_findfile will resolve symlinks, so we know that we get
@@ -684,7 +723,13 @@ int ubifs_load(char *filename, u32 addr, u32 size)
page.index = 0;
page.inode = inode;
for (i = 0; i < count; i++) {
- err = do_readpage(c, inode, &page);
+ /*
+ * Make sure to not read beyond the requested size
+ */
+ if (((i + 1) == count) && (size < inode->i_size))
+ last_block_size = size - (i * PAGE_SIZE);
+
+ err = do_readpage(c, inode, &page, last_block_size);
if (err)
break;
diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
index 7b82c43..a959940 100644
--- a/include/configs/MPC8360EMDS.h
+++ b/include/configs/MPC8360EMDS.h
@@ -296,13 +296,13 @@
/*
* CS4 on Local Bus, to PIB
*/
-#define CONFIG_SYS_BR4_PRELIM 0xf8010801 /* CS4 base address at 0xf8010000 */
+#define CONFIG_SYS_BR4_PRELIM 0xf8008801 /* CS4 base address at 0xf8008000 */
#define CONFIG_SYS_OR4_PRELIM 0xffffe9f7 /* size 32KB, port size 8bit, GPCM */
/*
* CS5 on Local Bus, to PIB
*/
-#define CONFIG_SYS_BR5_PRELIM 0xf8008801 /* CS5 base address at 0xf8008000 */
+#define CONFIG_SYS_BR5_PRELIM 0xf8010801 /* CS5 base address at 0xf8010000 */
#define CONFIG_SYS_OR5_PRELIM 0xffffe9f7 /* size 32KB, port size 8bit, GPCM */
/*
diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index 850665a..5c5be0c 100644
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -242,9 +242,10 @@
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#if defined(CONFIG_SYS_SPL) || defined(CONFIG_RAMBOOT_NAND) \
- || defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH)
+#if defined(CONFIG_RAMBOOT_NAND) || defined(CONFIG_RAMBOOT_SDCARD) || \
+ defined(CONFIG_RAMBOOT_SPIFLASH)
#define CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_EXTRA_ENV_RELOC
#else
#undef CONFIG_SYS_RAMBOOT
#endif
diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h
index c7973b4..9620fd0 100644
--- a/include/configs/MPC8569MDS.h
+++ b/include/configs/MPC8569MDS.h
@@ -203,8 +203,9 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#if defined(CONFIG_SYS_SPL) || defined(CONFIG_RAMBOOT_NAND)
+#if defined(CONFIG_RAMBOOT_NAND)
#define CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_EXTRA_ENV_RELOC
#else
#undef CONFIG_SYS_RAMBOOT
#endif
diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index 692c811..1ee95ae 100644
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -202,6 +202,7 @@
#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */
+#define CONFIG_HWCONFIG /* enable hwconfig */
#define CONFIG_FSL_PIXIS 1 /* use common PIXIS code */
#define PIXIS_BASE 0xffdf0000 /* PIXIS registers */
#ifdef CONFIG_PHYS_64BIT
diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h
index 610f3ed..2dfee3d 100644
--- a/include/configs/P1_P2_RDB.h
+++ b/include/configs/P1_P2_RDB.h
@@ -201,9 +201,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#if defined(CONFIG_SYS_SPL) || defined(CONFIG_RAMBOOT_NAND) \
- || defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH)
+#if defined(CONFIG_RAMBOOT_NAND) || defined(CONFIG_RAMBOOT_SDCARD) || \
+ defined(CONFIG_RAMBOOT_SPIFLASH)
#define CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_EXTRA_ENV_RELOC
#else
#undef CONFIG_SYS_RAMBOOT
#endif
@@ -436,14 +437,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
-/* TBI PHY configuration for SGMII mode */
-#define CONFIG_TSEC_TBICR_SETTINGS ( \
- TBICR_PHY_RESET \
- | TBICR_ANEG_ENABLE \
- | TBICR_FULL_DUPLEX \
- | TBICR_SPEED1_SET \
- )
-
#endif /* CONFIG_TSEC_ENET */
/*
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index 9a9ba88..70e8f07 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -163,6 +163,7 @@
#define CONFIG_DRIVER_OMAP34XX_I2C 1
#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
/*
* Board NAND Info.
*/
@@ -330,4 +331,10 @@ extern unsigned int boot_flash_sec;
extern unsigned int boot_flash_type;
#endif
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE 0x800
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
#endif /* __CONFIG_H */
diff --git a/include/configs/aria.h b/include/configs/aria.h
index b3ca8d2..3a60de0 100644
--- a/include/configs/aria.h
+++ b/include/configs/aria.h
@@ -49,7 +49,6 @@
#define CONFIG_E300 1 /* E300 Family */
#define CONFIG_MPC512X 1 /* MPC512X family */
#define CONFIG_FSL_DIU_FB 1 /* FSL DIU */
-#define CONFIG_FSL_DIU_LOGO_BMP 1 /* Don't include FSL DIU binary bmp */
#define CONFIG_SYS_TEXT_BASE 0xFFF00000
diff --git a/include/configs/at91rm9200ek.h b/include/configs/at91rm9200ek.h
index 14559f5..810023a 100644
--- a/include/configs/at91rm9200ek.h
+++ b/include/configs/at91rm9200ek.h
@@ -33,6 +33,20 @@
#include <asm/sizes.h>
/*
+ * set some initial configurations depending on configure target
+ *
+ * at91rm9200ek_config -> boot from 0x0 in NOR Flash at CS0
+ * at91rm9200ek_ram_config -> continue booting from 0x20100000 in RAM; lowlevel
+ * initialisation was done by some preloader
+ */
+#ifdef CONFIG_RAMBOOT
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SYS_TEXT_BASE 0x20100000
+#else
+#define CONFIG_SYS_TEXT_BASE 0x10000000
+#endif
+
+/*
* AT91C_XTAL_CLOCK is the frequency of external xtal in hertz
* AT91C_MAIN_CLOCK is the frequency of PLLA output
* AT91C_MASTER_CLOCK is the peripherial clock
@@ -57,6 +71,8 @@
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
+#define CONFIG_AT91FAMILY
+
/*
* Memory Configuration
*/
@@ -90,7 +106,7 @@
#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */
#define CONFIG_SYS_SDRC_CR_VAL 0x2188c155 /* set up the CONFIG_SYS_SDRAM */
#define CONFIG_SYS_SDRAM CONFIG_SYS_SDRAM_BASE /* address of the SDRAM */
-#define CONFIG_SYS_SDRAM1 CONFIG_SYS_SDRAM_BASE /* address of the SDRAM */
+#define CONFIG_SYS_SDRAM1 (CONFIG_SYS_SDRAM_BASE+0x80)
#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to CONFIG_SYS_SDRAM */
#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */
#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */
diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h
index 83056b6..92491ca 100644
--- a/include/configs/atngw100.h
+++ b/include/configs/atngw100.h
@@ -104,8 +104,6 @@
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_DOS_PARTITION 1
-
/*
* Command line configuration.
*/
diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h
index e1b1db1..45214fa 100644
--- a/include/configs/davinci_dvevm.h
+++ b/include/configs/davinci_dvevm.h
@@ -50,7 +50,7 @@
/*=======*/
#define DV_EVM
#define CONFIG_SYS_NAND_SMALLPAGE
-#define CONFIG_SYS_USE_NOR
+#define CONFIG_SYS_USE_NAND
#define CONFIG_DISPLAY_CPUINFO
/*===================*/
/* SoC Configuration */
@@ -78,6 +78,7 @@
#define CONFIG_STACKSIZE (256*1024) /* regular stack */
#define PHYS_SDRAM_1 0x80000000 /* DDR Start */
#define PHYS_SDRAM_1_SIZE 0x10000000 /* DDR size 256MB */
+
#define DDR_8BANKS /* 8-bank DDR2 (256MB) */
/*====================*/
/* Serial Driver info */
@@ -228,11 +229,13 @@
#define CONFIG_PREBOOT "usb start"
#endif
#endif
-/*=======================*/
-/* KGDB support (if any) */
-/*=======================*/
-#ifdef CONFIG_CMD_KGDB
-#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
-#endif
+
+#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */
+
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
+
#endif /* __CONFIG_H */
diff --git a/include/configs/igep0030.h b/include/configs/igep0030.h
index d61793c..1325bfa 100644
--- a/include/configs/igep0030.h
+++ b/include/configs/igep0030.h
@@ -110,6 +110,7 @@
#define CONFIG_MTD_DEVICE
#undef CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
+#undef CONFIG_CMD_NFS /* nfs */
#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
#undef CONFIG_CMD_IMLS /* List all found images */
diff --git a/include/configs/mimc200.h b/include/configs/mimc200.h
index 6ed9e75..16e2ec6 100644
--- a/include/configs/mimc200.h
+++ b/include/configs/mimc200.h
@@ -109,8 +109,6 @@
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_DOS_PARTITION 1
-
/*
* Command line configuration.
*/
diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h
index f98438d..b4e5738 100644
--- a/include/configs/mx51evk.h
+++ b/include/configs/mx51evk.h
@@ -216,8 +216,9 @@
*/
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_ENV_SECT_SIZE (128 * 1024)
-#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
-#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
+#define CONFIG_ENV_SIZE (8 * 1024)
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 0
#endif
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
index 84b2986..5bdb3fd 100644
--- a/include/configs/omap3_evm.h
+++ b/include/configs/omap3_evm.h
@@ -330,7 +330,11 @@ extern unsigned int boot_flash_type;
* Support for relocation
*/
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR (LOW_LEVEL_SRAM_STACK - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE 0x800
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
/*
* Define the board revision statically
diff --git a/include/configs/omap3_sdp3430.h b/include/configs/omap3_sdp3430.h
index a5eb648..4708981 100644
--- a/include/configs/omap3_sdp3430.h
+++ b/include/configs/omap3_sdp3430.h
@@ -309,6 +309,12 @@
#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack */
#endif
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE 0x800
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
/*
* SDRAM Memory Map
*/
diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h
index d9e8ea0..f7d0652 100644
--- a/include/configs/omap3_zoom1.h
+++ b/include/configs/omap3_zoom1.h
@@ -236,6 +236,12 @@
#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default */
/* load address */
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE 0x800
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
/*
* OMAP3 has 12 GP timers, they can be driven by the system clock
* (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h
index 41abe04..7377933 100644
--- a/include/configs/omap3_zoom2.h
+++ b/include/configs/omap3_zoom2.h
@@ -188,6 +188,12 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"usbtty=cdc_acm\0" \
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE 0x800
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
/*
* Miscellaneous configurable options
*/
diff --git a/include/configs/omap4_sdp4430.h b/include/configs/omap4_sdp4430.h
index bdd330a..9a8bb73 100644
--- a/include/configs/omap4_sdp4430.h
+++ b/include/configs/omap4_sdp4430.h
@@ -140,6 +140,7 @@
/* Disabled commands */
#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
#undef CONFIG_CMD_IMLS /* List all found images */
diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h
index 7fcc9ba..26e5049 100644
--- a/include/configs/pm9261.h
+++ b/include/configs/pm9261.h
@@ -45,6 +45,8 @@
#define CONFIG_PM9261 1 /* on a Ronetix PM9261 Board */
#define CONFIG_ARCH_CPU_INIT
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+#define CONFIG_SYS_TEXT_BASE 0
+#define CONFIG_AT91FAMILY
/* clocks */
/* CKGR_MOR - enable main osc. */
@@ -201,6 +203,7 @@
#undef CONFIG_CMD_LOADS
#undef CONFIG_CMD_IMLS
+#define CONFIG_CMD_CACHE
#define CONFIG_CMD_PING 1
#define CONFIG_CMD_DHCP 1
#define CONFIG_CMD_NAND 1
@@ -370,6 +373,10 @@
#define CONFIG_SYS_MALLOC_LEN \
ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000)
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
+ GENERATED_GBL_DATA_SIZE)
+
#define CONFIG_STACKSIZE (32 * 1024) /* regular stack */
#ifdef CONFIG_USE_IRQ
diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h
index 619af2d..96e12f2 100644
--- a/include/configs/pm9263.h
+++ b/include/configs/pm9263.h
@@ -44,6 +44,8 @@
#define CONFIG_PM9263 1 /* on a Ronetix PM9263 Board */
#define CONFIG_ARCH_CPU_INIT
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+#define CONFIG_SYS_TEXT_BASE 0
+#define CONFIG_AT91FAMILY
/* clocks */
#define CONFIG_SYS_MOR_VAL \
@@ -212,6 +214,7 @@
#undef CONFIG_CMD_LOADS
#undef CONFIG_CMD_IMLS
+#define CONFIG_CMD_CACHE
#define CONFIG_CMD_PING 1
#define CONFIG_CMD_DHCP 1
#define CONFIG_CMD_NAND 1
@@ -401,6 +404,10 @@
*/
#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000)
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
+ GENERATED_GBL_DATA_SIZE)
+
#define CONFIG_STACKSIZE (32 * 1024) /* regular stack */
#ifdef CONFIG_USE_IRQ
diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h
index 3ed6b56..ec51ccf 100644
--- a/include/configs/pm9g45.h
+++ b/include/configs/pm9g45.h
@@ -39,6 +39,8 @@
/* ARM asynchronous clock */
#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_TEXT_BASE 0x73f00000
+#define CONFIG_AT91FAMILY
#define CONFIG_ARCH_CPU_INIT
@@ -79,6 +81,7 @@
#undef CONFIG_CMD_FPGA
#undef CONFIG_CMD_IMLS
+#define CONFIG_CMD_CACHE
#define CONFIG_CMD_PING 1
#define CONFIG_CMD_DHCP 1
#define CONFIG_CMD_NAND 1
@@ -175,6 +178,10 @@
#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024,\
0x1000)
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
+ GENERATED_GBL_DATA_SIZE)
+
#define CONFIG_STACKSIZE (32*1024) /* regular stack */
#ifdef CONFIG_USE_IRQ
diff --git a/include/configs/r7780mp.h b/include/configs/r7780mp.h
index 3416cb8..802416f 100644
--- a/include/configs/r7780mp.h
+++ b/include/configs/r7780mp.h
@@ -154,7 +154,6 @@
#define CONFIG_RTL8169
*/
/* AX88796L Support(NE2000 base chip) */
-#define CONFIG_DRIVER_NE2000
#define CONFIG_DRIVER_AX88796L
#define CONFIG_DRIVER_NE2000_BASE 0xA4100000
#endif
diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h
index 541aec0..f53e798 100644
--- a/include/configs/s5p_goni.h
+++ b/include/configs/s5p_goni.h
@@ -217,4 +217,6 @@
#define CONFIG_DOS_PARTITION 1
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000)
+
#endif /* __CONFIG_H */
diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h
index e36b262..fb8b43c 100644
--- a/include/configs/smdkc100.h
+++ b/include/configs/smdkc100.h
@@ -231,6 +231,8 @@
#define CONFIG_DOS_PARTITION 1
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000)
+
/*
* Ethernet Contoller driver
*/
diff --git a/include/configs/top9000.h b/include/configs/top9000.h
new file mode 100644
index 0000000..ff3933b
--- /dev/null
+++ b/include/configs/top9000.h
@@ -0,0 +1,314 @@
+/*
+ * (C) Copyright 2010
+ * Reinhard Meyer, EMK Elektronik, reinhard.meyer@emk-elektronik.de
+ *
+ * Configuation settings for the TOP9000 CPU module with AT91SAM9XE.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/*
+ * top9000 with at91sam9xe256 or at91sam9xe512
+ *
+ * Initial Bootloader is in embedded flash.
+ * Vital Product Data, U-Boot Environment are in I2C-EEPROM.
+ * U-Boot is in embedded flash, a backup U-Boot can be in NAND flash.
+ * kernel and file system are either in NAND flash or on a micro SD card.
+ * NAND flash is optional.
+ * I2C EEPROM is never optional.
+ * SPI FRAM is optional.
+ * SPI ENC28J60 is optional.
+ * 16 or 32 bit wide SDRAM.
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * Warning: changing CONFIG_SYS_TEXT_BASE requires
+ * adapting the initial boot program
+ */
+#define CONFIG_SYS_TEXT_BASE 0x21f00000 /* 31 MB into RAM */
+
+/* Command line configuration */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_XIMG
+#define CONFIG_CMD_ASKENV
+#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_PBSIZE \
+ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_PROMPT "TOP9000> "
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_CACHE
+
+/* ARM asynchronous clock */
+#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432 MHz xtal */
+#define CONFIG_SYS_HZ 1000
+
+/* SoC */
+#define CONFIG_ARM926EJS /* ARM926EJS Core */
+#define CONFIG_AT91FAMILY /* it's a member of AT91 */
+#define CONFIG_AT91SAM9260 /* Atmel AT91SAM9260 based SoC */
+#define CONFIG_AT91SAM9XE
+
+/* Misc CPU related */
+#define CONFIG_AT91_LEGACY
+#define CONFIG_ARCH_CPU_INIT
+#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_AT91RESET_EXTRST /* assert external reset */
+
+/* general purpose I/O */
+#define CONFIG_AT91_GPIO
+#define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */
+
+/* serial console */
+#define CONFIG_ATMEL_USART
+#define CONFIG_USART3 /* USART 3 is DBGU !!! */
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
+
+/* SD/MMC card */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_GENERIC_ATMEL_MCI
+#define CONFIG_SYS_MMC_CD_PIN AT91_PIN_PC9
+#define CONFIG_CMD_MMC
+
+/* Ethernet */
+#define CONFIG_MACB
+#define CONFIG_SYS_PHY_ID 1
+#define CONFIG_RMII
+#define CONFIG_NET_MULTI
+#define CONFIG_NET_RETRY_COUNT 20
+
+/* real time clock */
+#define CONFIG_RTC_AT91SAM9_RTT
+#define CONFIG_CMD_DATE
+
+#if defined(CONFIG_AT91SAM9XE)
+/*
+ * NOR flash - use embedded flash of SAM9XE256/512
+ * U-Boot will not fit into 128K !
+ * 2010.09 will not fit into 256K with all options enabled !
+ *
+ * Layout:
+ * 16kB 1st Bootloader
+ * Rest U-Boot
+ * the first sector (16kB) of EFLASH cannot be unprotected
+ * with u-boot commands
+ */
+# define CONFIG_AT91_EFLASH
+# define CONFIG_SYS_FLASH_BASE 0x200000
+# define CONFIG_SYS_MAX_FLASH_SECT 32
+# define CONFIG_SYS_MAX_FLASH_BANKS 1
+# define CONFIG_SYS_FLASH_PROTECTION
+# define CONFIG_EFLASH_PROTSECTORS 1 /* protect first sector */
+#endif
+
+/* SPI */
+#define CONFIG_ATMEL_SPI
+#define CONFIG_CMD_SPI
+
+/* RAMTRON FRAM */
+#define CONFIG_CMD_SF
+#define CONFIG_ATMEL_SPI0 /* SPI used for FRAM is SPI0 */
+#define FRAM_SPI_BUS 0
+#define FRAM_CS_NUM 0
+#define CONFIG_SPI_FLASH /* RAMTRON FRAM on SPI bus */
+#define CONFIG_SPI_FRAM_RAMTRON
+#define CONFIG_SF_DEFAULT_SPEED 1000000 /* be conservative here... */
+#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
+#define CONFIG_SPI_FRAM_RAMTRON_NON_JEDEC "FM25H20"
+
+/* Microchip ENC28J60 (second LAN) */
+#if defined(CONFIG_EVAL9000)
+# define CONFIG_ENC28J60
+# define CONFIG_ATMEL_SPI1 /* SPI used for ENC28J60 is SPI1 */
+# define ENC_SPI_BUS 1
+# define ENC_CS_NUM 0
+# define ENC_SPI_CLOCK 1000000
+#endif /* CONFIG_EVAL9000 */
+
+/*
+ * SDRAM: 1 bank, min 32, max 128 MB
+ * Initialized before u-boot gets started.
+ */
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_SYS_SDRAM_BASE 0x20000000
+#define CONFIG_SYS_SDRAM_SIZE 0x08000000
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END 0x21e00000
+#define CONFIG_SYS_LOAD_ADDR \
+ (CONFIG_SYS_SDRAM_BASE + 0x01000000)
+/*
+ * Initial stack pointer: 16k - GENERATED_GBL_DATA_SIZE in internal SRAM,
+ * leaving the correct space for initial global data structure above
+ * that address while providing maximum stack area below.
+ */
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (0x00300000 + 0x4000 - GENERATED_GBL_DATA_SIZE)
+
+/*
+ * NAND flash: 256 MB (optional)
+ *
+ * Layout:
+ * 640kB: u-boot (includes space for spare sectors, handled by
+ * initial loader)
+ * 2MB: kernel
+ * rest: file system
+ */
+#define CONFIG_NAND_ATMEL
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE 0x40000000
+#define CONFIG_SYS_NAND_DBW_8
+#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
+#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
+#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
+#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13
+#define CONFIG_CMD_NAND
+
+/* USB */
+#define CONFIG_USB_ATMEL
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_DOS_PARTITION
+#define CONFIG_SYS_USB_OHCI_CPU_INIT
+#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME "top9000"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_USB
+
+/* I2C support must always be enabled */
+#define CONFIG_SOFT_I2C
+#define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C_SPEED 400000
+#define CONFIG_SYS_I2C_SLAVE 0x7F
+#define CONFIG_I2C_MULTI_BUS
+#define I2C0_PORT AT91_PIO_PORTA
+#define SDA0_PIN 23
+#define SCL0_PIN 24
+#define I2C1_PORT AT91_PIO_PORTB
+#define SDA1_PIN 12
+#define SCL1_PIN 13
+#define I2C_SOFT_DECLARATIONS void iic_init(void);\
+ int iic_read(void);\
+ void iic_sda(int);\
+ void iic_scl(int);
+#define I2C_ACTIVE
+#define I2C_TRISTATE
+#define I2C_INIT iic_init()
+#define I2C_READ iic_read()
+#define I2C_SDA(bit) iic_sda(bit)
+#define I2C_SCL(bit) iic_scl(bit)
+#define I2C_DELAY udelay(3)
+/* EEPROM configuration */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
+#define CONFIG_SYS_EEPROM_SIZE 0x2000
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
+/* later: #define CONFIG_I2C_ENV_EEPROM_BUS 0 */
+/* ENV is always in I2C-EEPROM */
+#define CONFIG_ENV_IS_IN_EEPROM
+#define CONFIG_ENV_OFFSET 0x1000
+#define CONFIG_ENV_SIZE 0x0f00
+/* VPD settings */
+#define CONFIG_SYS_I2C_FACT_ADDR 0x57
+#define CONFIG_SYS_FACT_OFFSET 0x1F00
+#define CONFIG_SYS_FACT_SIZE 0x0100
+/* later: #define CONFIG_MISC_INIT_R */
+/* define the next only if you want to allow users to enter VPD data */
+#define CONFIG_SYS_FACT_ENTRY
+#ifndef __ASSEMBLY__
+extern void read_factory_r(void);
+#endif
+
+/*
+ * Only interrupt autoboot if <space> is pressed. Otherwise, garbage
+ * data on the serial line may interrupt the boot sequence.
+ */
+#define CONFIG_BOOTDELAY 1
+#define CONFIG_AUTOBOOT
+#define CONFIG_AUTOBOOT_KEYED
+#define CONFIG_AUTOBOOT_PROMPT \
+ "Press SPACE to abort autoboot in %d seconds\n", bootdelay
+#define CONFIG_AUTOBOOT_DELAY_STR "d"
+#define CONFIG_AUTOBOOT_STOP_STR " "
+
+/*
+ * add filesystem commands if we have at least 1 storage
+ * media with filesystem
+ */
+#if defined(CONFIG_NAND_ATMEL) \
+ || defined(CONFIG_USB_ATMEL) \
+ || defined(CONFIG_MMC)
+# define CONFIG_DOS_PARTITION
+# define CONFIG_CMD_FAT
+# define CONFIG_CMD_EXT2
+/* later: #define CONFIG_CMD_JFFS2 */
+#endif
+
+/* add NET commands if we have at least 1 LAN */
+#if defined(CONFIG_MACB) || defined(CONFIG_ENC28J60)
+# define CONFIG_CMD_PING
+# define CONFIG_CMD_DHCP
+# define CONFIG_CMD_MII
+/* is this really needed ? */
+# define CONFIG_RESET_PHY_R
+/* BOOTP options */
+# define CONFIG_BOOTP_BOOTFILESIZE
+# define CONFIG_BOOTP_BOOTPATH
+# define CONFIG_BOOTP_GATEWAY
+# define CONFIG_BOOTP_HOSTNAME
+#endif
+
+/* linux in NAND flash */
+#define CONFIG_BOOTCOUNT_LIMIT 1
+#define CONFIG_BOOTCOMMAND \
+ "nand read 0x21000000 0xA0000 0x200000; bootm"
+#define CONFIG_BOOTARGS \
+ "console=ttyS0,115200 " \
+ "root=/dev/mtdblock2 " \
+ "mtdparts=atmel_nand:" \
+ "640k(uboot)ro," \
+ "2M(linux)," \
+ "16M(root)," \
+ "-(rest) " \
+ "rw "\
+ "rootfstype=jffs2"
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN \
+ ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
+#define CONFIG_STACKSIZE (32*1024)
+#ifdef CONFIG_USE_IRQ
+#error CONFIG_USE_IRQ not supported
+#endif
+
+#endif
+
diff --git a/include/configs/xpedite537x.h b/include/configs/xpedite537x.h
index e0a1fa4..a74766d 100644
--- a/include/configs/xpedite537x.h
+++ b/include/configs/xpedite537x.h
@@ -375,6 +375,16 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
#define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */
#define CONFIG_ETHPRIME "eTSEC2"
+/*
+ * In-band SGMII auto-negotiation between TBI and BCM5482S PHY fails, force
+ * 1000mbps SGMII link
+ */
+#define CONFIG_TSEC_TBICR_SETTINGS ( \
+ TBICR_PHY_RESET \
+ | TBICR_FULL_DUPLEX \
+ | TBICR_SPEED1_SET \
+ )
+
#define CONFIG_TSEC1 1
#define CONFIG_TSEC1_NAME "eTSEC1"
#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
diff --git a/include/configs/xpedite550x.h b/include/configs/xpedite550x.h
index 42d1f69..a051913 100644
--- a/include/configs/xpedite550x.h
+++ b/include/configs/xpedite550x.h
@@ -345,6 +345,16 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
#define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */
#define CONFIG_ETHPRIME "eTSEC2"
+/*
+ * In-band SGMII auto-negotiation between TBI and BCM5482S PHY fails, force
+ * 1000mbps SGMII link
+ */
+#define CONFIG_TSEC_TBICR_SETTINGS ( \
+ TBICR_PHY_RESET \
+ | TBICR_FULL_DUPLEX \
+ | TBICR_SPEED1_SET \
+ )
+
#define CONFIG_TSEC1 1
#define CONFIG_TSEC1_NAME "eTSEC1"
#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
diff --git a/include/linux/mii.h b/include/linux/mii.h
index 7c63095..6e7ffab 100644
--- a/include/linux/mii.h
+++ b/include/linux/mii.h
@@ -10,98 +10,132 @@
/* Generic MII registers. */
-#define MII_BMCR 0x00 /* Basic mode control register */
-#define MII_BMSR 0x01 /* Basic mode status register */
-#define MII_PHYSID1 0x02 /* PHYS ID 1 */
-#define MII_PHYSID2 0x03 /* PHYS ID 2 */
-#define MII_ADVERTISE 0x04 /* Advertisement control reg */
-#define MII_LPA 0x05 /* Link partner ability reg */
-#define MII_EXPANSION 0x06 /* Expansion register */
-#define MII_DCOUNTER 0x12 /* Disconnect counter */
-#define MII_FCSCOUNTER 0x13 /* False carrier counter */
-#define MII_NWAYTEST 0x14 /* N-way auto-neg test reg */
-#define MII_RERRCOUNTER 0x15 /* Receive error counter */
-#define MII_SREVISION 0x16 /* Silicon revision */
-#define MII_RESV1 0x17 /* Reserved... */
-#define MII_LBRERROR 0x18 /* Lpback, rx, bypass error */
-#define MII_PHYADDR 0x19 /* PHY address */
-#define MII_RESV2 0x1a /* Reserved... */
-#define MII_TPISTATUS 0x1b /* TPI status for 10mbps */
-#define MII_NCONFIG 0x1c /* Network interface config */
+#define MII_BMCR 0x00 /* Basic mode control register */
+#define MII_BMSR 0x01 /* Basic mode status register */
+#define MII_PHYSID1 0x02 /* PHYS ID 1 */
+#define MII_PHYSID2 0x03 /* PHYS ID 2 */
+#define MII_ADVERTISE 0x04 /* Advertisement control reg */
+#define MII_LPA 0x05 /* Link partner ability reg */
+#define MII_EXPANSION 0x06 /* Expansion register */
+#define MII_CTRL1000 0x09 /* 1000BASE-T control */
+#define MII_STAT1000 0x0a /* 1000BASE-T status */
+#define MII_ESTATUS 0x0f /* Extended Status */
+#define MII_DCOUNTER 0x12 /* Disconnect counter */
+#define MII_FCSCOUNTER 0x13 /* False carrier counter */
+#define MII_NWAYTEST 0x14 /* N-way auto-neg test reg */
+#define MII_RERRCOUNTER 0x15 /* Receive error counter */
+#define MII_SREVISION 0x16 /* Silicon revision */
+#define MII_RESV1 0x17 /* Reserved... */
+#define MII_LBRERROR 0x18 /* Lpback, rx, bypass error */
+#define MII_PHYADDR 0x19 /* PHY address */
+#define MII_RESV2 0x1a /* Reserved... */
+#define MII_TPISTATUS 0x1b /* TPI status for 10mbps */
+#define MII_NCONFIG 0x1c /* Network interface config */
/* Basic mode control register. */
-#define BMCR_RESV 0x003f /* Unused... */
-#define BMCR_SPEED1000 0x0040 /* MSB of Speed (1000) */
-#define BMCR_CTST 0x0080 /* Collision test */
-#define BMCR_FULLDPLX 0x0100 /* Full duplex */
-#define BMCR_ANRESTART 0x0200 /* Auto negotiation restart */
-#define BMCR_ISOLATE 0x0400 /* Disconnect DP83840 from MII */
-#define BMCR_PDOWN 0x0800 /* Powerdown the DP83840 */
-#define BMCR_ANENABLE 0x1000 /* Enable auto negotiation */
-#define BMCR_SPEED100 0x2000 /* Select 100Mbps */
-#define BMCR_LOOPBACK 0x4000 /* TXD loopback bits */
-#define BMCR_RESET 0x8000 /* Reset the DP83840 */
+#define BMCR_RESV 0x003f /* Unused... */
+#define BMCR_SPEED1000 0x0040 /* MSB of Speed (1000) */
+#define BMCR_CTST 0x0080 /* Collision test */
+#define BMCR_FULLDPLX 0x0100 /* Full duplex */
+#define BMCR_ANRESTART 0x0200 /* Auto negotiation restart */
+#define BMCR_ISOLATE 0x0400 /* Disconnect DP83840 from MII */
+#define BMCR_PDOWN 0x0800 /* Powerdown the DP83840 */
+#define BMCR_ANENABLE 0x1000 /* Enable auto negotiation */
+#define BMCR_SPEED100 0x2000 /* Select 100Mbps */
+#define BMCR_LOOPBACK 0x4000 /* TXD loopback bits */
+#define BMCR_RESET 0x8000 /* Reset the DP83840 */
/* Basic mode status register. */
-#define BMSR_ERCAP 0x0001 /* Ext-reg capability */
-#define BMSR_JCD 0x0002 /* Jabber detected */
-#define BMSR_LSTATUS 0x0004 /* Link status */
-#define BMSR_ANEGCAPABLE 0x0008 /* Able to do auto-negotiation */
-#define BMSR_RFAULT 0x0010 /* Remote fault detected */
-#define BMSR_ANEGCOMPLETE 0x0020 /* Auto-negotiation complete */
-#define BMSR_RESV 0x07c0 /* Unused... */
-#define BMSR_10HALF 0x0800 /* Can do 10mbps, half-duplex */
-#define BMSR_10FULL 0x1000 /* Can do 10mbps, full-duplex */
-#define BMSR_100HALF 0x2000 /* Can do 100mbps, half-duplex */
-#define BMSR_100FULL 0x4000 /* Can do 100mbps, full-duplex */
-#define BMSR_100BASE4 0x8000 /* Can do 100mbps, 4k packets */
+#define BMSR_ERCAP 0x0001 /* Ext-reg capability */
+#define BMSR_JCD 0x0002 /* Jabber detected */
+#define BMSR_LSTATUS 0x0004 /* Link status */
+#define BMSR_ANEGCAPABLE 0x0008 /* Able to do auto-negotiation */
+#define BMSR_RFAULT 0x0010 /* Remote fault detected */
+#define BMSR_ANEGCOMPLETE 0x0020 /* Auto-negotiation complete */
+#define BMSR_RESV 0x00c0 /* Unused... */
+#define BMSR_ESTATEN 0x0100 /* Extended Status in R15 */
+#define BMSR_100HALF2 0x0200 /* Can do 100BASE-T2 HDX */
+#define BMSR_100FULL2 0x0400 /* Can do 100BASE-T2 FDX */
+#define BMSR_10HALF 0x0800 /* Can do 10mbps, half-duplex */
+#define BMSR_10FULL 0x1000 /* Can do 10mbps, full-duplex */
+#define BMSR_100HALF 0x2000 /* Can do 100mbps, half-duplex */
+#define BMSR_100FULL 0x4000 /* Can do 100mbps, full-duplex */
+#define BMSR_100BASE4 0x8000 /* Can do 100mbps, 4k packets */
/* Advertisement control register. */
-#define ADVERTISE_SLCT 0x001f /* Selector bits */
-#define ADVERTISE_CSMA 0x0001 /* Only selector supported */
-#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */
-#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */
-#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */
-#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */
-#define ADVERTISE_100BASE4 0x0200 /* Try for 100mbps 4k packets */
-#define ADVERTISE_RESV 0x1c00 /* Unused... */
-#define ADVERTISE_RFAULT 0x2000 /* Say we can detect faults */
-#define ADVERTISE_LPACK 0x4000 /* Ack link partners response */
-#define ADVERTISE_NPAGE 0x8000 /* Next page bit */
+#define ADVERTISE_SLCT 0x001f /* Selector bits */
+#define ADVERTISE_CSMA 0x0001 /* Only selector supported */
+#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */
+#define ADVERTISE_1000XFULL 0x0020 /* Try for 1000BASE-X full-duplex */
+#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */
+#define ADVERTISE_1000XHALF 0x0040 /* Try for 1000BASE-X half-duplex */
+#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */
+#define ADVERTISE_1000XPAUSE 0x0080 /* Try for 1000BASE-X pause */
+#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */
+#define ADVERTISE_1000XPSE_ASYM 0x0100 /* Try for 1000BASE-X asym pause */
+#define ADVERTISE_100BASE4 0x0200 /* Try for 100mbps 4k packets */
+#define ADVERTISE_PAUSE_CAP 0x0400 /* Try for pause */
+#define ADVERTISE_PAUSE_ASYM 0x0800 /* Try for asymetric pause */
+#define ADVERTISE_RESV 0x1000 /* Unused... */
+#define ADVERTISE_RFAULT 0x2000 /* Say we can detect faults */
+#define ADVERTISE_LPACK 0x4000 /* Ack link partners response */
+#define ADVERTISE_NPAGE 0x8000 /* Next page bit */
#define ADVERTISE_FULL (ADVERTISE_100FULL | ADVERTISE_10FULL | \
ADVERTISE_CSMA)
#define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \
- ADVERTISE_100HALF | ADVERTISE_100FULL)
+ ADVERTISE_100HALF | ADVERTISE_100FULL)
/* Link partner ability register. */
-#define LPA_SLCT 0x001f /* Same as advertise selector */
-#define LPA_10HALF 0x0020 /* Can do 10mbps half-duplex */
-#define LPA_10FULL 0x0040 /* Can do 10mbps full-duplex */
-#define LPA_100HALF 0x0080 /* Can do 100mbps half-duplex */
-#define LPA_100FULL 0x0100 /* Can do 100mbps full-duplex */
-#define LPA_100BASE4 0x0200 /* Can do 100mbps 4k packets */
-#define LPA_RESV 0x1c00 /* Unused... */
-#define LPA_RFAULT 0x2000 /* Link partner faulted */
-#define LPA_LPACK 0x4000 /* Link partner acked us */
-#define LPA_NPAGE 0x8000 /* Next page bit */
+#define LPA_SLCT 0x001f /* Same as advertise selector */
+#define LPA_10HALF 0x0020 /* Can do 10mbps half-duplex */
+#define LPA_1000XFULL 0x0020 /* Can do 1000BASE-X full-duplex */
+#define LPA_10FULL 0x0040 /* Can do 10mbps full-duplex */
+#define LPA_1000XHALF 0x0040 /* Can do 1000BASE-X half-duplex */
+#define LPA_100HALF 0x0080 /* Can do 100mbps half-duplex */
+#define LPA_1000XPAUSE 0x0080 /* Can do 1000BASE-X pause */
+#define LPA_100FULL 0x0100 /* Can do 100mbps full-duplex */
+#define LPA_1000XPAUSE_ASYM 0x0100 /* Can do 1000BASE-X pause asym*/
+#define LPA_100BASE4 0x0200 /* Can do 100mbps 4k packets */
+#define LPA_PAUSE_CAP 0x0400 /* Can pause */
+#define LPA_PAUSE_ASYM 0x0800 /* Can pause asymetrically */
+#define LPA_RESV 0x1000 /* Unused... */
+#define LPA_RFAULT 0x2000 /* Link partner faulted */
+#define LPA_LPACK 0x4000 /* Link partner acked us */
+#define LPA_NPAGE 0x8000 /* Next page bit */
#define LPA_DUPLEX (LPA_10FULL | LPA_100FULL)
#define LPA_100 (LPA_100FULL | LPA_100HALF | LPA_100BASE4)
/* Expansion register for auto-negotiation. */
-#define EXPANSION_NWAY 0x0001 /* Can do N-way auto-nego */
-#define EXPANSION_LCWP 0x0002 /* Got new RX page code word */
-#define EXPANSION_ENABLENPAGE 0x0004 /* This enables npage words */
-#define EXPANSION_NPCAPABLE 0x0008 /* Link partner supports npage */
-#define EXPANSION_MFAULTS 0x0010 /* Multiple faults detected */
-#define EXPANSION_RESV 0xffe0 /* Unused... */
+#define EXPANSION_NWAY 0x0001 /* Can do N-way auto-nego */
+#define EXPANSION_LCWP 0x0002 /* Got new RX page code word */
+#define EXPANSION_ENABLENPAGE 0x0004 /* This enables npage words */
+#define EXPANSION_NPCAPABLE 0x0008 /* Link partner supports npage */
+#define EXPANSION_MFAULTS 0x0010 /* Multiple faults detected */
+#define EXPANSION_RESV 0xffe0 /* Unused... */
+
+#define ESTATUS_1000_TFULL 0x2000 /* Can do 1000BT Full */
+#define ESTATUS_1000_THALF 0x1000 /* Can do 1000BT Half */
/* N-way test register. */
-#define NWAYTEST_RESV1 0x00ff /* Unused... */
-#define NWAYTEST_LOOPBACK 0x0100 /* Enable loopback for N-way */
-#define NWAYTEST_RESV2 0xfe00 /* Unused... */
+#define NWAYTEST_RESV1 0x00ff /* Unused... */
+#define NWAYTEST_LOOPBACK 0x0100 /* Enable loopback for N-way */
+#define NWAYTEST_RESV2 0xfe00 /* Unused... */
+
+/* 1000BASE-T Control register */
+#define ADVERTISE_1000FULL 0x0200 /* Advertise 1000BASE-T full duplex */
+#define ADVERTISE_1000HALF 0x0100 /* Advertise 1000BASE-T half duplex */
+/* 1000BASE-T Status register */
+#define LPA_1000LOCALRXOK 0x2000 /* Link partner local receiver status */
+#define LPA_1000REMRXOK 0x1000 /* Link partner remote receiver status */
+#define LPA_1000FULL 0x0800 /* Link partner 1000BASE-T full duplex */
+#define LPA_1000HALF 0x0400 /* Link partner 1000BASE-T half duplex */
+
+/* Flow control flags */
+#define FLOW_CTRL_TX 0x01
+#define FLOW_CTRL_RX 0x02
/**
* mii_nway_result
@@ -114,7 +148,7 @@
*
* The one exception to IEEE 802.3u is that 100baseT4 is placed
* between 100T-full and 100T-half. If your phy does not support
- * 100T4 this is fine. If your phy places 100T4 elsewhere in the
+ * 100T4 this is fine. If your phy places 100T4 elsewhere in the
* priority order, you will need to roll your own function.
*/
static inline unsigned int mii_nway_result (unsigned int negotiated)
@@ -154,5 +188,4 @@ static inline unsigned int mii_duplex (unsigned int duplex_lock,
return 0;
}
-
#endif /* __LINUX_MII_H__ */
diff --git a/include/pci_ids.h b/include/pci_ids.h
index dcc381d..cb8398d 100644
--- a/include/pci_ids.h
+++ b/include/pci_ids.h
@@ -882,6 +882,7 @@
#define PCI_DEVICE_ID_PLX_SPCOM200 0x1103
#define PCI_DEVICE_ID_PLX_DJINN_ITOO 0x1151
#define PCI_DEVICE_ID_PLX_R753 0x1152
+#define PCI_DEVICE_ID_PLX_9030 0x9030
#define PCI_DEVICE_ID_PLX_9050 0x9050
#define PCI_DEVICE_ID_PLX_9060 0x9060
#define PCI_DEVICE_ID_PLX_9060ES 0x906E
diff --git a/include/post.h b/include/post.h
index 957ce3b..519cef1 100644
--- a/include/post.h
+++ b/include/post.h
@@ -58,11 +58,13 @@
#elif defined (CONFIG_MPC85xx)
#include <asm/immap_85xx.h>
-#define _POST_WORD_ADDR (CONFIG_SYS_IMMR + offsetof(ccsr_pic_t, tfrr))
+#define _POST_WORD_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PIC_OFFSET + \
+ offsetof(ccsr_pic_t, tfrr))
#elif defined (CONFIG_MPC86xx)
#include <asm/immap_86xx.h>
-#define _POST_WORD_ADDR (CONFIG_SYS_IMMR + offsetof(ccsr_pic_t, tfrr))
+#define _POST_WORD_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_PIC_OFFSET + \
+ offsetof(ccsr_pic_t, tfrr))
#elif defined (CONFIG_4xx)
#define _POST_WORD_ADDR \