diff options
128 files changed, 2760 insertions, 630 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index b387207..9d447ea 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -126,8 +126,8 @@ F: arch/arm/cpu/armv7/s5p-common/ F: arch/arm/include/asm/arch-s3c24x0/ ARM STM SPEAR -M: Vipin Kumar <vipin.kumar@st.com> -S: Maintained +#M: Vipin Kumar <vipin.kumar@st.com> +S: Orphaned (Since 2016-02) T: git git://git.denx.de/u-boot-stm.git F: arch/arm/cpu/arm926ejs/spear/ F: arch/arm/include/asm/arch-spear/ @@ -309,8 +309,8 @@ T: git git://git.denx.de/u-boot-mpc82xx.git F: arch/powerpc/cpu/mpc82*/ POWERPC MPC83XX -M: Kim Phillips <kim.phillips@freescale.com> -S: Maintained +#M: Kim Phillips <kim.phillips@freescale.com> +S: Orphaned (Since 2016-02) T: git git://git.denx.de/u-boot-mpc83xx.git F: arch/powerpc/cpu/mpc83xx/ F: arch/powerpc/include/asm/arch-mpc83xx/ @@ -376,8 +376,8 @@ T: git git://git.denx.de/u-boot-sh.git F: arch/sh/ SPARC -M: Francois Retief <fgretief@spaceteq.co.za> -S: Maintained +#M: Francois Retief <fgretief@spaceteq.co.za> +S: Orphaned (Since 2016-02) T: git git://git.denx.de/u-boot-sparc.git F: arch/sparc/ @@ -390,8 +390,8 @@ F: drivers/spi/ F: include/spi* TQ GROUP -M: Martin Krause <martin.krause@tq-systems.de> -S: Maintained +#M: Martin Krause <martin.krause@tq-systems.de> +S: Orphaned (Since 2016-02) T: git git://git.denx.de/u-boot-tq-group.git UBI diff --git a/arch/arm/cpu/armv7/ls102xa/soc.c b/arch/arm/cpu/armv7/ls102xa/soc.c index 79ae883..b1b0c71 100644 --- a/arch/arm/cpu/armv7/ls102xa/soc.c +++ b/arch/arm/cpu/armv7/ls102xa/soc.c @@ -9,6 +9,43 @@ #include <asm/io.h> #include <asm/arch/immap_ls102xa.h> #include <asm/arch/ls102xa_soc.h> +#include <asm/arch/ls102xa_stream_id.h> + +struct liodn_id_table sec_liodn_tbl[] = { + SET_SEC_JR_LIODN_ENTRY(0, 0x10, 0x10), + SET_SEC_JR_LIODN_ENTRY(1, 0x10, 0x10), + SET_SEC_JR_LIODN_ENTRY(2, 0x10, 0x10), + SET_SEC_JR_LIODN_ENTRY(3, 0x10, 0x10), + SET_SEC_RTIC_LIODN_ENTRY(a, 0x10), + SET_SEC_RTIC_LIODN_ENTRY(b, 0x10), + SET_SEC_RTIC_LIODN_ENTRY(c, 0x10), + SET_SEC_RTIC_LIODN_ENTRY(d, 0x10), + SET_SEC_DECO_LIODN_ENTRY(0, 0x10, 0x10), + SET_SEC_DECO_LIODN_ENTRY(1, 0x10, 0x10), + SET_SEC_DECO_LIODN_ENTRY(2, 0x10, 0x10), + SET_SEC_DECO_LIODN_ENTRY(3, 0x10, 0x10), + SET_SEC_DECO_LIODN_ENTRY(4, 0x10, 0x10), + SET_SEC_DECO_LIODN_ENTRY(5, 0x10, 0x10), + SET_SEC_DECO_LIODN_ENTRY(6, 0x10, 0x10), + SET_SEC_DECO_LIODN_ENTRY(7, 0x10, 0x10), +}; + +struct smmu_stream_id dev_stream_id[] = { + { 0x100, 0x01, "ETSEC MAC1" }, + { 0x104, 0x02, "ETSEC MAC2" }, + { 0x108, 0x03, "ETSEC MAC3" }, + { 0x10c, 0x04, "PEX1" }, + { 0x110, 0x05, "PEX2" }, + { 0x114, 0x06, "qDMA" }, + { 0x118, 0x07, "SATA" }, + { 0x11c, 0x08, "USB3" }, + { 0x120, 0x09, "QE" }, + { 0x124, 0x0a, "eSDHC" }, + { 0x128, 0x0b, "eMA" }, + { 0x14c, 0x0c, "2D-ACE" }, + { 0x150, 0x0d, "USB2" }, + { 0x18c, 0x0e, "DEBUG" }, +}; unsigned int get_soc_major_rev(void) { @@ -88,3 +125,14 @@ int arch_soc_init(void) return 0; } + +int ls102xa_smmu_stream_id_init(void) +{ + ls1021x_config_caam_stream_id(sec_liodn_tbl, + ARRAY_SIZE(sec_liodn_tbl)); + + ls102xa_config_smmu_stream_id(dev_stream_id, + ARRAY_SIZE(dev_stream_id)); + + return 0; +} diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c index 4e4861d..9c18fd7 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c @@ -14,6 +14,9 @@ #ifdef CONFIG_FSL_ESDHC #include <fsl_esdhc.h> #endif +#ifdef CONFIG_SYS_DPAA_FMAN +#include <fsl_fman.h> +#endif #ifdef CONFIG_MP #include <asm/arch/mp.h> #endif @@ -204,4 +207,8 @@ void ft_cpu_setup(void *blob, bd_t *bd) #ifdef CONFIG_FSL_LSCH3 fdt_fixup_smmu(blob); #endif + +#ifdef CONFIG_SYS_DPAA_FMAN + fdt_fixup_fman_firmware(blob); +#endif } diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c index 7ff0148..213ce3a 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c @@ -213,6 +213,24 @@ static void erratum_a009929(void) #endif } +/* + * This erratum requires setting a value to eddrtqcr1 to optimal + * the DDR performance. The eddrtqcr1 register is in SCFG space + * of LS1043A and the offset is 0x157_020c. + */ +#if defined(CONFIG_SYS_FSL_ERRATUM_A009660) \ + && defined(CONFIG_SYS_FSL_ERRATUM_A008514) +#error A009660 and A008514 can not be both enabled. +#endif + +static void erratum_a009660(void) +{ +#ifdef CONFIG_SYS_FSL_ERRATUM_A009660 + u32 *eddrtqcr1 = (void *)CONFIG_SYS_FSL_SCFG_ADDR + 0x20c; + out_be32(eddrtqcr1, 0x63b20042); +#endif +} + void fsl_lsch2_early_init_f(void) { struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR; @@ -238,6 +256,7 @@ void fsl_lsch2_early_init_f(void) /* Erratum */ erratum_a009929(); + erratum_a009660(); } #endif diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index b574284..578038b 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -96,7 +96,8 @@ dtb-$(CONFIG_TARGET_DRA7XX_EVM) += dra72-evm.dtb dra7-evm.dtb dtb-$(CONFIG_TARGET_BEAGLE_X15) += am57xx-beagle-x15.dtb dtb-$(CONFIG_TARGET_STV0991) += stv0991.dtb -dtb-$(CONFIG_LS102XA) += ls1021a-qds.dtb \ +dtb-$(CONFIG_LS102XA) += ls1021a-qds-duart.dtb \ + ls1021a-qds-lpuart.dtb \ ls1021a-twr-duart.dtb ls1021a-twr-lpuart.dtb dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2080a-qds.dtb \ fsl-ls2080a-rdb.dtb diff --git a/arch/arm/dts/ls1021a-qds-duart.dts b/arch/arm/dts/ls1021a-qds-duart.dts new file mode 100644 index 0000000..bc56867 --- /dev/null +++ b/arch/arm/dts/ls1021a-qds-duart.dts @@ -0,0 +1,16 @@ +/* + * Freescale ls1021a QDS board common device tree source + * + * Copyright 2013-2015 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; +#include "ls1021a-qds.dtsi" + +/ { + chosen { + stdout-path = &uart0; + }; +}; diff --git a/arch/arm/dts/ls1021a-qds-lpuart.dts b/arch/arm/dts/ls1021a-qds-lpuart.dts new file mode 100644 index 0000000..1d16ffd --- /dev/null +++ b/arch/arm/dts/ls1021a-qds-lpuart.dts @@ -0,0 +1,16 @@ +/* + * Freescale ls1021a QDS board common device tree source + * + * Copyright 2013-2015 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; +#include "ls1021a-qds.dtsi" + +/ { + chosen { + stdout-path = &lpuart0; + }; +}; diff --git a/arch/arm/dts/ls1021a-qds.dts b/arch/arm/dts/ls1021a-qds.dtsi index e634292..ca9e835 100644 --- a/arch/arm/dts/ls1021a-qds.dts +++ b/arch/arm/dts/ls1021a-qds.dtsi @@ -1,12 +1,11 @@ /* - * Freescale ls1021a QDS board device tree source + * Freescale ls1021a QDS board common device tree source * * Copyright 2013-2015 Freescale Semiconductor, Inc. * * SPDX-License-Identifier: GPL-2.0+ */ -/dts-v1/; #include "ls1021a.dtsi" / { diff --git a/arch/arm/dts/socfpga_arria5_socdk.dts b/arch/arm/dts/socfpga_arria5_socdk.dts index 5933a40..9ac48a1 100644 --- a/arch/arm/dts/socfpga_arria5_socdk.dts +++ b/arch/arm/dts/socfpga_arria5_socdk.dts @@ -82,8 +82,10 @@ &qspi { status = "okay"; + u-boot,dm-pre-reloc; flash0: n25q00@0 { + u-boot,dm-pre-reloc; #address-cells = <1>; #size-cells = <1>; compatible = "n25q00"; diff --git a/arch/arm/dts/socfpga_cyclone5_socdk.dts b/arch/arm/dts/socfpga_cyclone5_socdk.dts index a202709..da13435 100644 --- a/arch/arm/dts/socfpga_cyclone5_socdk.dts +++ b/arch/arm/dts/socfpga_cyclone5_socdk.dts @@ -84,8 +84,10 @@ &qspi { status = "okay"; + u-boot,dm-pre-reloc; flash0: n25q00@0 { + u-boot,dm-pre-reloc; #address-cells = <1>; #size-cells = <1>; compatible = "n25q00"; diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h index ff3b1be..0ef7c9d 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/config.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h @@ -177,6 +177,8 @@ #define CONFIG_SYS_FSL_ERRATUM_A009663 #define CONFIG_SYS_FSL_ERRATUM_A009929 +#define CONFIG_SYS_FSL_ERRATUM_A009942 +#define CONFIG_SYS_FSL_ERRATUM_A009660 #else #error SoC not defined #endif diff --git a/arch/arm/include/asm/arch-ls102xa/ls102xa_soc.h b/arch/arm/include/asm/arch-ls102xa/ls102xa_soc.h index f10cb91..a354684 100644 --- a/arch/arm/include/asm/arch-ls102xa/ls102xa_soc.h +++ b/arch/arm/include/asm/arch-ls102xa/ls102xa_soc.h @@ -9,4 +9,6 @@ unsigned int get_soc_major_rev(void); int arch_soc_init(void); +int ls102xa_smmu_stream_id_init(void); + #endif /* __FSL_LS102XA_SOC_H */ diff --git a/arch/arm/include/asm/arch-stm32f1/stm32.h b/arch/arm/include/asm/arch-stm32f1/stm32.h index 4094a75..1af73c5 100644 --- a/arch/arm/include/asm/arch-stm32f1/stm32.h +++ b/arch/arm/include/asm/arch-stm32f1/stm32.h @@ -24,6 +24,14 @@ #define STM32_BUS_MASK 0xFFFF0000 +#define STM32_GPIOA_BASE (STM32_APB2PERIPH_BASE + 0x0800) +#define STM32_GPIOB_BASE (STM32_APB2PERIPH_BASE + 0x0C00) +#define STM32_GPIOC_BASE (STM32_APB2PERIPH_BASE + 0x1000) +#define STM32_GPIOD_BASE (STM32_APB2PERIPH_BASE + 0x1400) +#define STM32_GPIOE_BASE (STM32_APB2PERIPH_BASE + 0x1800) +#define STM32_GPIOF_BASE (STM32_APB2PERIPH_BASE + 0x1C00) +#define STM32_GPIOG_BASE (STM32_APB2PERIPH_BASE + 0x2000) + /* * Register maps */ diff --git a/arch/arm/include/asm/arch-stm32f4/stm32.h b/arch/arm/include/asm/arch-stm32f4/stm32.h index 6b64d03..7d6331b 100644 --- a/arch/arm/include/asm/arch-stm32f4/stm32.h +++ b/arch/arm/include/asm/arch-stm32f4/stm32.h @@ -23,6 +23,16 @@ #define STM32_BUS_MASK 0xFFFF0000 +#define STM32_GPIOA_BASE (STM32_AHB1PERIPH_BASE + 0x0000) +#define STM32_GPIOB_BASE (STM32_AHB1PERIPH_BASE + 0x0400) +#define STM32_GPIOC_BASE (STM32_AHB1PERIPH_BASE + 0x0800) +#define STM32_GPIOD_BASE (STM32_AHB1PERIPH_BASE + 0x0C00) +#define STM32_GPIOE_BASE (STM32_AHB1PERIPH_BASE + 0x1000) +#define STM32_GPIOF_BASE (STM32_AHB1PERIPH_BASE + 0x1400) +#define STM32_GPIOG_BASE (STM32_AHB1PERIPH_BASE + 0x1800) +#define STM32_GPIOH_BASE (STM32_AHB1PERIPH_BASE + 0x1C00) +#define STM32_GPIOI_BASE (STM32_AHB1PERIPH_BASE + 0x2000) + /* * Register maps */ diff --git a/arch/arm/include/asm/arch-stm32f4/stm32_periph.h b/arch/arm/include/asm/arch-stm32f4/stm32_periph.h index a1af25c..38adc4e 100644 --- a/arch/arm/include/asm/arch-stm32f4/stm32_periph.h +++ b/arch/arm/include/asm/arch-stm32f4/stm32_periph.h @@ -22,6 +22,17 @@ enum periph_id { enum periph_clock { USART1_CLOCK_CFG = 0, USART2_CLOCK_CFG, + GPIO_A_CLOCK_CFG, + GPIO_B_CLOCK_CFG, + GPIO_C_CLOCK_CFG, + GPIO_D_CLOCK_CFG, + GPIO_E_CLOCK_CFG, + GPIO_F_CLOCK_CFG, + GPIO_G_CLOCK_CFG, + GPIO_H_CLOCK_CFG, + GPIO_I_CLOCK_CFG, + GPIO_J_CLOCK_CFG, + GPIO_K_CLOCK_CFG, }; #endif /* __ASM_ARM_ARCH_PERIPH_H */ diff --git a/arch/arm/include/asm/arch-stm32f7/gpio.h b/arch/arm/include/asm/arch-stm32f7/gpio.h new file mode 100644 index 0000000..2942cd9 --- /dev/null +++ b/arch/arm/include/asm/arch-stm32f7/gpio.h @@ -0,0 +1,113 @@ +/* + * (C) Copyright 2016 + * Vikas Manocha, <vikas.manocha@st.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _STM32_GPIO_H_ +#define _STM32_GPIO_H_ + +enum stm32_gpio_port { + STM32_GPIO_PORT_A = 0, + STM32_GPIO_PORT_B, + STM32_GPIO_PORT_C, + STM32_GPIO_PORT_D, + STM32_GPIO_PORT_E, + STM32_GPIO_PORT_F, + STM32_GPIO_PORT_G, + STM32_GPIO_PORT_H, + STM32_GPIO_PORT_I +}; + +enum stm32_gpio_pin { + STM32_GPIO_PIN_0 = 0, + STM32_GPIO_PIN_1, + STM32_GPIO_PIN_2, + STM32_GPIO_PIN_3, + STM32_GPIO_PIN_4, + STM32_GPIO_PIN_5, + STM32_GPIO_PIN_6, + STM32_GPIO_PIN_7, + STM32_GPIO_PIN_8, + STM32_GPIO_PIN_9, + STM32_GPIO_PIN_10, + STM32_GPIO_PIN_11, + STM32_GPIO_PIN_12, + STM32_GPIO_PIN_13, + STM32_GPIO_PIN_14, + STM32_GPIO_PIN_15 +}; + +enum stm32_gpio_mode { + STM32_GPIO_MODE_IN = 0, + STM32_GPIO_MODE_OUT, + STM32_GPIO_MODE_AF, + STM32_GPIO_MODE_AN +}; + +enum stm32_gpio_otype { + STM32_GPIO_OTYPE_PP = 0, + STM32_GPIO_OTYPE_OD +}; + +enum stm32_gpio_speed { + STM32_GPIO_SPEED_2M = 0, + STM32_GPIO_SPEED_25M, + STM32_GPIO_SPEED_50M, + STM32_GPIO_SPEED_100M +}; + +enum stm32_gpio_pupd { + STM32_GPIO_PUPD_NO = 0, + STM32_GPIO_PUPD_UP, + STM32_GPIO_PUPD_DOWN +}; + +enum stm32_gpio_af { + STM32_GPIO_AF0 = 0, + STM32_GPIO_AF1, + STM32_GPIO_AF2, + STM32_GPIO_AF3, + STM32_GPIO_AF4, + STM32_GPIO_AF5, + STM32_GPIO_AF6, + STM32_GPIO_AF7, + STM32_GPIO_AF8, + STM32_GPIO_AF9, + STM32_GPIO_AF10, + STM32_GPIO_AF11, + STM32_GPIO_AF12, + STM32_GPIO_AF13, + STM32_GPIO_AF14, + STM32_GPIO_AF15 +}; + +struct stm32_gpio_dsc { + enum stm32_gpio_port port; + enum stm32_gpio_pin pin; +}; + +struct stm32_gpio_ctl { + enum stm32_gpio_mode mode; + enum stm32_gpio_otype otype; + enum stm32_gpio_speed speed; + enum stm32_gpio_pupd pupd; + enum stm32_gpio_af af; +}; + +static inline unsigned stm32_gpio_to_port(unsigned gpio) +{ + return gpio / 16; +} + +static inline unsigned stm32_gpio_to_pin(unsigned gpio) +{ + return gpio % 16; +} + +int stm32_gpio_config(const struct stm32_gpio_dsc *gpio_dsc, + const struct stm32_gpio_ctl *gpio_ctl); +int stm32_gpout_set(const struct stm32_gpio_dsc *gpio_dsc, int state); + +#endif /* _STM32_GPIO_H_ */ diff --git a/arch/arm/include/asm/arch-stm32f7/gpt.h b/arch/arm/include/asm/arch-stm32f7/gpt.h new file mode 100644 index 0000000..903bdf6 --- /dev/null +++ b/arch/arm/include/asm/arch-stm32f7/gpt.h @@ -0,0 +1,53 @@ +/* + * (C) Copyright 2016 + * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _STM32_GPT_H +#define _STM32_GPT_H + +#include <asm/arch/stm32.h> + +struct gpt_regs { + u32 cr1; + u32 cr2; + u32 smcr; + u32 dier; + u32 sr; + u32 egr; + u32 ccmr1; + u32 ccmr2; + u32 ccer; + u32 cnt; + u32 psc; + u32 arr; + u32 reserved; + u32 ccr1; + u32 ccr2; + u32 ccr3; + u32 ccr4; + u32 reserved1; + u32 dcr; + u32 dmar; + u32 tim2_5_or; +}; + +struct gpt_regs *const gpt1_regs_ptr = + (struct gpt_regs *)TIM2_BASE; + +/* Timer control1 register */ +#define GPT_CR1_CEN 0x0001 +#define GPT_MODE_AUTO_RELOAD (1 << 7) + +/* Auto reload register for free running config */ +#define GPT_FREE_RUNNING 0xFFFFFFFF + +/* Timer, HZ specific defines */ +#define CONFIG_STM32_HZ 1000 + +/* Timer Event Generation registers */ +#define TIM_EGR_UG (1 << 0) + +#endif diff --git a/arch/arm/include/asm/arch-stm32f7/rcc.h b/arch/arm/include/asm/arch-stm32f7/rcc.h new file mode 100644 index 0000000..8bfb7b6 --- /dev/null +++ b/arch/arm/include/asm/arch-stm32f7/rcc.h @@ -0,0 +1,64 @@ +/* + * (C) Copyright 2016 + * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _STM32_RCC_H +#define _STM32_RCC_H + +#define RCC_CR 0x00 /* clock control */ +#define RCC_PLLCFGR 0x04 /* PLL configuration */ +#define RCC_CFGR 0x08 /* clock configuration */ +#define RCC_CIR 0x0C /* clock interrupt */ +#define RCC_AHB1RSTR 0x10 /* AHB1 peripheral reset */ +#define RCC_AHB2RSTR 0x14 /* AHB2 peripheral reset */ +#define RCC_AHB3RSTR 0x18 /* AHB3 peripheral reset */ +#define RCC_APB1RSTR 0x20 /* APB1 peripheral reset */ +#define RCC_APB2RSTR 0x24 /* APB2 peripheral reset */ +#define RCC_AHB1ENR 0x30 /* AHB1 peripheral clock enable */ +#define RCC_AHB2ENR 0x34 /* AHB2 peripheral clock enable */ +#define RCC_AHB3ENR 0x38 /* AHB3 peripheral clock enable */ +#define RCC_APB1ENR 0x40 /* APB1 peripheral clock enable */ +#define RCC_APB2ENR 0x44 /* APB2 peripheral clock enable */ +#define RCC_AHB1LPENR 0x50 /* periph clk enable in low pwr mode */ +#define RCC_AHB2LPENR 0x54 /* AHB2 periph clk enable in low pwr mode */ +#define RCC_AHB3LPENR 0x58 /* AHB3 periph clk enable in low pwr mode */ +#define RCC_APB1LPENR 0x60 /* APB1 periph clk enable in low pwr mode */ +#define RCC_APB2LPENR 0x64 /* APB2 periph clk enable in low pwr mode */ +#define RCC_BDCR 0x70 /* Backup domain control */ +#define RCC_CSR 0x74 /* clock control & status */ +#define RCC_SSCGR 0x80 /* spread spectrum clock generation */ +#define RCC_PLLI2SCFGR 0x84 /* PLLI2S configuration */ +#define RCC_PLLSAICFG 0x88 /* PLLSAI configuration */ +#define RCC_DCKCFG1 0x8C /* dedicated clocks configuration register */ +#define RCC_DCKCFG2 0x90 /* dedicated clocks configuration register */ + +#define RCC_APB1ENR_TIM2EN (1 << 0) +#define RCC_APB1ENR_PWREN (1 << 28) + +/* + * RCC USART specific definitions + */ +#define RCC_ENR_USART1EN (1 << 4) +#define RCC_ENR_USART2EN (1 << 17) +#define RCC_ENR_USART3EN (1 << 18) +#define RCC_ENR_USART6EN (1 << 5) + +/* + * RCC GPIO specific definitions + */ +#define RCC_ENR_GPIO_A_EN (1 << 0) +#define RCC_ENR_GPIO_B_EN (1 << 1) +#define RCC_ENR_GPIO_C_EN (1 << 2) +#define RCC_ENR_GPIO_D_EN (1 << 3) +#define RCC_ENR_GPIO_E_EN (1 << 4) +#define RCC_ENR_GPIO_F_EN (1 << 5) +#define RCC_ENR_GPIO_G_EN (1 << 6) +#define RCC_ENR_GPIO_H_EN (1 << 7) +#define RCC_ENR_GPIO_I_EN (1 << 8) +#define RCC_ENR_GPIO_J_EN (1 << 9) +#define RCC_ENR_GPIO_K_EN (1 << 10) + +#endif diff --git a/arch/arm/include/asm/arch-stm32f7/stm32.h b/arch/arm/include/asm/arch-stm32f7/stm32.h new file mode 100644 index 0000000..713eb2e --- /dev/null +++ b/arch/arm/include/asm/arch-stm32f7/stm32.h @@ -0,0 +1,63 @@ +/* + * (C) Copyright 2016 + * Vikas Manocha, STMicroelectronics, <vikas.manocha@st.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _ASM_ARCH_HARDWARE_H +#define _ASM_ARCH_HARDWARE_H + +/* STM32F746 */ +#define ITCM_FLASH_BASE 0x00200000UL +#define AXIM_FLASH_BASE 0x08000000UL + +#define ITCM_SRAM_BASE 0x00000000UL +#define DTCM_SRAM_BASE 0x20000000UL +#define SRAM1_BASE 0x20010000UL +#define SRAM2_BASE 0x2004C000UL + +#define PERIPH_BASE 0x40000000UL + +#define APB1_PERIPH_BASE (PERIPH_BASE + 0x00000000) +#define APB2_PERIPH_BASE (PERIPH_BASE + 0x00010000) +#define AHB1_PERIPH_BASE (PERIPH_BASE + 0x00020000) +#define AHB2_PERIPH_BASE (PERIPH_BASE + 0x10000000) +#define AHB3_PERIPH_BASE (PERIPH_BASE + 0x20000000) + +#define TIM2_BASE (APB1_PERIPH_BASE + 0x0000) +#define USART2_BASE (APB1_PERIPH_BASE + 0x4400) +#define USART3_BASE (APB1_PERIPH_BASE + 0x4800) +#define PWR_BASE (APB1_PERIPH_BASE + 0x7000) + +#define USART1_BASE (APB2_PERIPH_BASE + 0x1000) +#define USART6_BASE (APB2_PERIPH_BASE + 0x1400) + +#define STM32_GPIOA_BASE (AHB1_PERIPH_BASE + 0x0000) +#define STM32_GPIOB_BASE (AHB1_PERIPH_BASE + 0x0400) +#define STM32_GPIOC_BASE (AHB1_PERIPH_BASE + 0x0800) +#define STM32_GPIOD_BASE (AHB1_PERIPH_BASE + 0x0C00) +#define STM32_GPIOE_BASE (AHB1_PERIPH_BASE + 0x1000) +#define STM32_GPIOF_BASE (AHB1_PERIPH_BASE + 0x1400) +#define STM32_GPIOG_BASE (AHB1_PERIPH_BASE + 0x1800) +#define STM32_GPIOH_BASE (AHB1_PERIPH_BASE + 0x1C00) +#define STM32_GPIOI_BASE (AHB1_PERIPH_BASE + 0x2000) +#define STM32_GPIOJ_BASE (AHB1_PERIPH_BASE + 0x2400) +#define STM32_GPIOK_BASE (AHB1_PERIPH_BASE + 0x2800) +#define RCC_BASE (AHB1_PERIPH_BASE + 0x3800) +#define FLASH_CNTL_BASE (AHB1_PERIPH_BASE + 0x3C00) + + +#define SDRAM_FMC_BASE (AHB3_PERIPH_BASE + 0x4A0000140) + +enum clock { + CLOCK_CORE, + CLOCK_AHB, + CLOCK_APB1, + CLOCK_APB2 +}; +#define STM32_BUS_MASK 0xFFFF0000 + +int configure_clocks(void); + +#endif /* _ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/include/asm/arch-stm32f7/stm32_defs.h b/arch/arm/include/asm/arch-stm32f7/stm32_defs.h new file mode 100644 index 0000000..29b98ae --- /dev/null +++ b/arch/arm/include/asm/arch-stm32f7/stm32_defs.h @@ -0,0 +1,15 @@ +/* + * (C) Copyright 2016 + * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __STM32_DEFS_H__ +#define __STM32_DEFS_H__ +#include <asm/arch/stm32_periph.h> + +int clock_setup(enum periph_clock); + +#endif + diff --git a/arch/arm/include/asm/arch-stm32f7/stm32_periph.h b/arch/arm/include/asm/arch-stm32f7/stm32_periph.h new file mode 100644 index 0000000..38adc4e --- /dev/null +++ b/arch/arm/include/asm/arch-stm32f7/stm32_periph.h @@ -0,0 +1,38 @@ +/* + * (C) Copyright 2016 + * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARM_ARCH_PERIPH_H +#define __ASM_ARM_ARCH_PERIPH_H + +/* + * Peripherals required for pinmux configuration. List will + * grow with support for more devices getting added. + * Numbering based on interrupt table. + * + */ +enum periph_id { + UART1_GPIOA_9_10 = 0, + UART2_GPIOD_5_6, +}; + +enum periph_clock { + USART1_CLOCK_CFG = 0, + USART2_CLOCK_CFG, + GPIO_A_CLOCK_CFG, + GPIO_B_CLOCK_CFG, + GPIO_C_CLOCK_CFG, + GPIO_D_CLOCK_CFG, + GPIO_E_CLOCK_CFG, + GPIO_F_CLOCK_CFG, + GPIO_G_CLOCK_CFG, + GPIO_H_CLOCK_CFG, + GPIO_I_CLOCK_CFG, + GPIO_J_CLOCK_CFG, + GPIO_K_CLOCK_CFG, +}; + +#endif /* __ASM_ARM_ARCH_PERIPH_H */ diff --git a/arch/arm/mach-bcm283x/include/mach/mbox.h b/arch/arm/mach-bcm283x/include/mach/mbox.h index af94dff..4a14391 100644 --- a/arch/arm/mach-bcm283x/include/mach/mbox.h +++ b/arch/arm/mach-bcm283x/include/mach/mbox.h @@ -150,6 +150,17 @@ struct bcm2835_mbox_tag_get_mac_address { } body; }; +#define BCM2835_MBOX_TAG_GET_BOARD_SERIAL 0x00010004 + +struct bcm2835_mbox_tag_get_board_serial { + struct bcm2835_mbox_tag_hdr tag_hdr; + union { + struct __packed { + u64 serial; + } resp; + } body; +}; + #define BCM2835_MBOX_TAG_GET_ARM_MEMORY 0x00010005 struct bcm2835_mbox_tag_get_arm_mem { diff --git a/arch/arm/mach-socfpga/misc.c b/arch/arm/mach-socfpga/misc.c index 9b43b92..ce3ff0a 100644 --- a/arch/arm/mach-socfpga/misc.c +++ b/arch/arm/mach-socfpga/misc.c @@ -104,7 +104,7 @@ static void dwmac_deassert_reset(const unsigned int of_reset_id) socfpga_per_reset(reset, 0); } -int cpu_eth_init(bd_t *bis) +static int socfpga_eth_reset(void) { const void *fdt = gd->fdt_blob; struct fdtdec_phandle_args args; @@ -137,6 +137,11 @@ int cpu_eth_init(bd_t *bis) return 0; } +#else +static int socfpga_eth_reset(void) +{ + return 0 +}; #endif struct { @@ -232,7 +237,7 @@ int arch_misc_init(void) setenv("bootmode", bsel_str[bsel].mode); if (fpga_id >= 0) setenv("fpgatype", socfpga_fpga_model[fpga_id].var); - return 0; + return socfpga_eth_reset(); } #endif diff --git a/arch/arm/mach-socfpga/qts-filter.sh b/arch/arm/mach-socfpga/qts-filter.sh index 1adfbf7..050d6ba 100755 --- a/arch/arm/mach-socfpga/qts-filter.sh +++ b/arch/arm/mach-socfpga/qts-filter.sh @@ -187,13 +187,13 @@ usage() { echo "$0 [soc_type] [input_qts_dir] [input_bsp_dir] [output_dir]" echo "Process QTS-generated headers into U-Boot compatible ones." echo "" - echo -e " soc_type\t-\tType of SoC, either 'cyclone5' or 'arria5'." - echo -e " input_qts_dir\t-\tDirectory with compiled Quartus project" - echo -e "\t\t\t\tand containing the Quartus project file (QPF)." - echo -e " input_bsp_dir\t-\tDirectory with generated bsp containing" - echo -e "\t\t\t\tthe settings.bsp file." - echo -e " output_dir\t-\tDirectory to store the U-Boot compatible" - echo -e "\t\t\t\theaders." + echo " soc_type - Type of SoC, either 'cyclone5' or 'arria5'." + echo " input_qts_dir - Directory with compiled Quartus project" + echo " and containing the Quartus project file (QPF)." + echo " input_bsp_dir - Directory with generated bsp containing" + echo " the settings.bsp file." + echo " output_dir - Directory to store the U-Boot compatible" + echo " headers." echo "" } diff --git a/arch/arm/mach-stm32/Kconfig b/arch/arm/mach-stm32/Kconfig index 7dbeb04..ec6b3ff 100644 --- a/arch/arm/mach-stm32/Kconfig +++ b/arch/arm/mach-stm32/Kconfig @@ -6,7 +6,11 @@ config STM32F4 config STM32F1 bool "stm32f1 family" +config STM32F7 + bool "stm32f7 family" + source "arch/arm/mach-stm32/stm32f4/Kconfig" source "arch/arm/mach-stm32/stm32f1/Kconfig" +source "arch/arm/mach-stm32/stm32f7/Kconfig" endif diff --git a/arch/arm/mach-stm32/Makefile b/arch/arm/mach-stm32/Makefile index ea06034..ffc537f 100644 --- a/arch/arm/mach-stm32/Makefile +++ b/arch/arm/mach-stm32/Makefile @@ -7,3 +7,4 @@ obj-$(CONFIG_STM32F1) += stm32f1/ obj-$(CONFIG_STM32F4) += stm32f4/ +obj-$(CONFIG_STM32F7) += stm32f7/ diff --git a/arch/arm/mach-stm32/stm32f4/clock.c b/arch/arm/mach-stm32/stm32f4/clock.c index 576d3e6..631f36a 100644 --- a/arch/arm/mach-stm32/stm32f4/clock.c +++ b/arch/arm/mach-stm32/stm32f4/clock.c @@ -71,6 +71,21 @@ #define FLASH_ACR_ICEN (1 << 9) #define FLASH_ACR_DCEN (1 << 10) +/* + * RCC GPIO specific definitions + */ +#define RCC_ENR_GPIO_A_EN (1 << 0) +#define RCC_ENR_GPIO_B_EN (1 << 1) +#define RCC_ENR_GPIO_C_EN (1 << 2) +#define RCC_ENR_GPIO_D_EN (1 << 3) +#define RCC_ENR_GPIO_E_EN (1 << 4) +#define RCC_ENR_GPIO_F_EN (1 << 5) +#define RCC_ENR_GPIO_G_EN (1 << 6) +#define RCC_ENR_GPIO_H_EN (1 << 7) +#define RCC_ENR_GPIO_I_EN (1 << 8) +#define RCC_ENR_GPIO_J_EN (1 << 9) +#define RCC_ENR_GPIO_K_EN (1 << 10) + struct pll_psc { u8 pll_m; u16 pll_n; @@ -237,6 +252,39 @@ void clock_setup(int peripheral) case USART1_CLOCK_CFG: setbits_le32(&STM32_RCC->apb2enr, RCC_ENR_USART1EN); break; + case GPIO_A_CLOCK_CFG: + setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_A_EN); + break; + case GPIO_B_CLOCK_CFG: + setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_B_EN); + break; + case GPIO_C_CLOCK_CFG: + setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_C_EN); + break; + case GPIO_D_CLOCK_CFG: + setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_D_EN); + break; + case GPIO_E_CLOCK_CFG: + setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_E_EN); + break; + case GPIO_F_CLOCK_CFG: + setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_F_EN); + break; + case GPIO_G_CLOCK_CFG: + setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_G_EN); + break; + case GPIO_H_CLOCK_CFG: + setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_H_EN); + break; + case GPIO_I_CLOCK_CFG: + setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_I_EN); + break; + case GPIO_J_CLOCK_CFG: + setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_J_EN); + break; + case GPIO_K_CLOCK_CFG: + setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_K_EN); + break; default: break; } diff --git a/arch/arm/mach-stm32/stm32f7/Kconfig b/arch/arm/mach-stm32/stm32f7/Kconfig new file mode 100644 index 0000000..287e5ad --- /dev/null +++ b/arch/arm/mach-stm32/stm32f7/Kconfig @@ -0,0 +1,8 @@ +if STM32F7 + +config TARGET_STM32F746_DISCO + bool "STM32F746 Discovery board" + +source "board/st/stm32f746-disco/Kconfig" + +endif diff --git a/arch/arm/mach-stm32/stm32f7/Makefile b/arch/arm/mach-stm32/stm32f7/Makefile new file mode 100644 index 0000000..40f1ad3 --- /dev/null +++ b/arch/arm/mach-stm32/stm32f7/Makefile @@ -0,0 +1,8 @@ +# +# (C) Copyright 2016 +# Vikas Manocha, <vikas.manocha@gmail.com> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += timer.o clock.o diff --git a/arch/arm/mach-stm32/stm32f7/clock.c b/arch/arm/mach-stm32/stm32f7/clock.c new file mode 100644 index 0000000..17a715b --- /dev/null +++ b/arch/arm/mach-stm32/stm32f7/clock.c @@ -0,0 +1,56 @@ +/* + * (C) Copyright 2016 + * Vikas Manocha, <vikas.manocha@st.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/rcc.h> +#include <asm/arch/stm32.h> +#include <asm/arch/stm32_periph.h> + +void clock_setup(int peripheral) +{ + switch (peripheral) { + case USART1_CLOCK_CFG: + setbits_le32(RCC_BASE + RCC_APB2ENR, RCC_ENR_USART1EN); + break; + case GPIO_A_CLOCK_CFG: + setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_A_EN); + break; + case GPIO_B_CLOCK_CFG: + setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_B_EN); + break; + case GPIO_C_CLOCK_CFG: + setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_C_EN); + break; + case GPIO_D_CLOCK_CFG: + setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_D_EN); + break; + case GPIO_E_CLOCK_CFG: + setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_E_EN); + break; + case GPIO_F_CLOCK_CFG: + setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_F_EN); + break; + case GPIO_G_CLOCK_CFG: + setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_G_EN); + break; + case GPIO_H_CLOCK_CFG: + setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_H_EN); + break; + case GPIO_I_CLOCK_CFG: + setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_I_EN); + break; + case GPIO_J_CLOCK_CFG: + setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_J_EN); + break; + case GPIO_K_CLOCK_CFG: + setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_K_EN); + break; + default: + break; + } +} diff --git a/arch/arm/mach-stm32/stm32f7/timer.c b/arch/arm/mach-stm32/stm32f7/timer.c new file mode 100644 index 0000000..a7dee10 --- /dev/null +++ b/arch/arm/mach-stm32/stm32f7/timer.c @@ -0,0 +1,112 @@ +/* + * (C) Copyright 2016 + * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/stm32.h> +#include <asm/arch/gpt.h> +#include <asm/arch/rcc.h> + +#define READ_TIMER() (readl(&gpt1_regs_ptr->cnt) & GPT_FREE_RUNNING) +#define GPT_RESOLUTION (CONFIG_SYS_HZ_CLOCK/CONFIG_STM32_HZ) + +DECLARE_GLOBAL_DATA_PTR; + +#define timestamp gd->arch.tbl +#define lastdec gd->arch.lastinc + +int timer_init(void) +{ + /* Timer2 clock configuration */ + setbits_le32(RCC_BASE + RCC_APB1ENR, RCC_APB1ENR_TIM2EN); + /* Stop the timer */ + writel(readl(&gpt1_regs_ptr->cr1) & ~GPT_CR1_CEN, &gpt1_regs_ptr->cr1); + + writel((CONFIG_SYS_CLK_FREQ/CONFIG_SYS_HZ_CLOCK) - 1, + &gpt1_regs_ptr->psc); + + /* Configure timer for auto-reload */ + writel(readl(&gpt1_regs_ptr->cr1) | GPT_MODE_AUTO_RELOAD, + &gpt1_regs_ptr->cr1); + + /* load value for free running */ + writel(GPT_FREE_RUNNING, &gpt1_regs_ptr->arr); + + /* start timer */ + writel(readl(&gpt1_regs_ptr->cr1) | GPT_CR1_CEN, &gpt1_regs_ptr->cr1); + + writel(readl(&gpt1_regs_ptr->egr) | TIM_EGR_UG, &gpt1_regs_ptr->egr); + + /* Reset the timer */ + lastdec = READ_TIMER(); + timestamp = 0; + + return 0; +} + +/* + * timer without interrupts + */ +ulong get_timer(ulong base) +{ + return (get_timer_masked() / GPT_RESOLUTION) - base; +} + +void __udelay(unsigned long usec) +{ + ulong tmo; + ulong start = get_timer_masked(); + ulong tenudelcnt = CONFIG_SYS_HZ_CLOCK / (1000 * 100); + ulong rndoff; + + rndoff = (usec % 10) ? 1 : 0; + + /* tenudelcnt timer tick gives 10 microsecconds delay */ + tmo = ((usec / 10) + rndoff) * tenudelcnt; + + while ((ulong) (get_timer_masked() - start) < tmo) + ; +} + +ulong get_timer_masked(void) +{ + ulong now = READ_TIMER(); + + if (now >= lastdec) { + /* normal mode */ + timestamp += now - lastdec; + } else { + /* we have an overflow ... */ + timestamp += now + GPT_FREE_RUNNING - lastdec; + } + lastdec = now; + + return timestamp; +} + +void udelay_masked(unsigned long usec) +{ + return udelay(usec); +} + +/* + * This function is derived from PowerPC code (read timebase as long long). + * On ARM it just returns the timer value. + */ +unsigned long long get_ticks(void) +{ + return get_timer(0); +} + +/* + * This function is derived from PowerPC code (timebase clock frequency). + * On ARM it returns the number of timer ticks per second. + */ +ulong get_tbclk(void) +{ + return CONFIG_STM32_HZ; +} diff --git a/arch/microblaze/dts/microblaze-generic.dts b/arch/microblaze/dts/microblaze-generic.dts index 2033309..08a1396 100644 --- a/arch/microblaze/dts/microblaze-generic.dts +++ b/arch/microblaze/dts/microblaze-generic.dts @@ -4,4 +4,6 @@ #size-cells = <1>; aliases { } ; + chosen { + } ; } ; diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index 80bbc18..f168375 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -37,6 +37,10 @@ #ifdef CONFIG_FSL_CAAM #include <fsl_sec.h> #endif +#if defined(CONFIG_SECURE_BOOT) && defined(CONFIG_FSL_CORENET) +#include <asm/fsl_pamu.h> +#include <fsl_secboot_err.h> +#endif #ifdef CONFIG_SYS_QE_FMAN_FW_IN_NAND #include <nand.h> #include <errno.h> @@ -44,7 +48,7 @@ #include "../../../../drivers/block/fsl_sata.h" #ifdef CONFIG_U_QE -#include "../../../../drivers/qe/qe.h" +#include <fsl_qe.h> #endif DECLARE_GLOBAL_DATA_PTR; @@ -432,8 +436,7 @@ void fsl_erratum_a007212_workaround(void) ulong cpu_init_f(void) { extern void m8560_cpm_reset (void); -#if defined(CONFIG_SYS_DCSRBAR_PHYS) || \ - (defined(CONFIG_SECURE_BOOT) && defined(CONFIG_FSL_CORENET)) +#ifdef CONFIG_SYS_DCSRBAR_PHYS ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); #endif #if defined(CONFIG_SECURE_BOOT) @@ -465,12 +468,6 @@ ulong cpu_init_f(void) #if defined(CONFIG_SYS_CPC_REINIT_F) disable_cpc_sram(); #endif - -#if defined(CONFIG_FSL_CORENET) - /* Put PAMU in bypass mode */ - out_be32(&gur->pamubypenr, FSL_CORENET_PAMU_BYPASS); -#endif - #endif #ifdef CONFIG_CPM2 @@ -954,6 +951,11 @@ int cpu_init_r(void) fman_enet_init(); #endif +#if defined(CONFIG_SECURE_BOOT) && defined(CONFIG_FSL_CORENET) + if (pamu_init() < 0) + fsl_secboot_handle_error(ERROR_ESBC_PAMU_INIT); +#endif + #ifdef CONFIG_FSL_CAAM sec_init(); #endif diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c index 7270be1..ced216c 100644 --- a/arch/powerpc/cpu/mpc85xx/fdt.c +++ b/arch/powerpc/cpu/mpc85xx/fdt.c @@ -19,7 +19,9 @@ #ifdef CONFIG_FSL_ESDHC #include <fsl_esdhc.h> #endif -#include "../../../../drivers/qe/qe.h" /* For struct qe_firmware */ +#ifdef CONFIG_SYS_DPAA_FMAN +#include <fsl_fman.h> +#endif DECLARE_GLOBAL_DATA_PTR; @@ -488,125 +490,6 @@ static void ft_fixup_qe_snum(void *blob) } #endif -/** - * fdt_fixup_fman_firmware -- insert the Fman firmware into the device tree - * - * The binding for an Fman firmware node is documented in - * Documentation/powerpc/dts-bindings/fsl/dpaa/fman.txt. This node contains - * the actual Fman firmware binary data. The operating system is expected to - * be able to parse the binary data to determine any attributes it needs. - */ -#ifdef CONFIG_SYS_DPAA_FMAN -void fdt_fixup_fman_firmware(void *blob) -{ - int rc, fmnode, fwnode = -1; - uint32_t phandle; - struct qe_firmware *fmanfw; - const struct qe_header *hdr; - unsigned int length; - uint32_t crc; - const char *p; - - /* The first Fman we find will contain the actual firmware. */ - fmnode = fdt_node_offset_by_compatible(blob, -1, "fsl,fman"); - if (fmnode < 0) - /* Exit silently if there are no Fman devices */ - return; - - /* If we already have a firmware node, then also exit silently. */ - if (fdt_node_offset_by_compatible(blob, -1, "fsl,fman-firmware") > 0) - return; - - /* If the environment variable is not set, then exit silently */ - p = getenv("fman_ucode"); - if (!p) - return; - - fmanfw = (struct qe_firmware *) simple_strtoul(p, NULL, 16); - if (!fmanfw) - return; - - hdr = &fmanfw->header; - length = be32_to_cpu(hdr->length); - - /* Verify the firmware. */ - if ((hdr->magic[0] != 'Q') || (hdr->magic[1] != 'E') || - (hdr->magic[2] != 'F')) { - printf("Data at %p is not an Fman firmware\n", fmanfw); - return; - } - - if (length > CONFIG_SYS_QE_FMAN_FW_LENGTH) { - printf("Fman firmware at %p is too large (size=%u)\n", - fmanfw, length); - return; - } - - length -= sizeof(u32); /* Subtract the size of the CRC */ - crc = be32_to_cpu(*(u32 *)((void *)fmanfw + length)); - if (crc != crc32_no_comp(0, (void *)fmanfw, length)) { - printf("Fman firmware at %p has invalid CRC\n", fmanfw); - return; - } - - /* Increase the size of the fdt to make room for the node. */ - rc = fdt_increase_size(blob, fmanfw->header.length); - if (rc < 0) { - printf("Unable to make room for Fman firmware: %s\n", - fdt_strerror(rc)); - return; - } - - /* Create the firmware node. */ - fwnode = fdt_add_subnode(blob, fmnode, "fman-firmware"); - if (fwnode < 0) { - char s[64]; - fdt_get_path(blob, fmnode, s, sizeof(s)); - printf("Could not add firmware node to %s: %s\n", s, - fdt_strerror(fwnode)); - return; - } - rc = fdt_setprop_string(blob, fwnode, "compatible", "fsl,fman-firmware"); - if (rc < 0) { - char s[64]; - fdt_get_path(blob, fwnode, s, sizeof(s)); - printf("Could not add compatible property to node %s: %s\n", s, - fdt_strerror(rc)); - return; - } - phandle = fdt_create_phandle(blob, fwnode); - if (!phandle) { - char s[64]; - fdt_get_path(blob, fwnode, s, sizeof(s)); - printf("Could not add phandle property to node %s: %s\n", s, - fdt_strerror(rc)); - return; - } - rc = fdt_setprop(blob, fwnode, "fsl,firmware", fmanfw, fmanfw->header.length); - if (rc < 0) { - char s[64]; - fdt_get_path(blob, fwnode, s, sizeof(s)); - printf("Could not add firmware property to node %s: %s\n", s, - fdt_strerror(rc)); - return; - } - - /* Find all other Fman nodes and point them to the firmware node. */ - while ((fmnode = fdt_node_offset_by_compatible(blob, fmnode, "fsl,fman")) > 0) { - rc = fdt_setprop_cell(blob, fmnode, "fsl,firmware-phandle", phandle); - if (rc < 0) { - char s[64]; - fdt_get_path(blob, fmnode, s, sizeof(s)); - printf("Could not add pointer property to node %s: %s\n", - s, fdt_strerror(rc)); - return; - } - } -} -#else -#define fdt_fixup_fman_firmware(x) -#endif - #if defined(CONFIG_PPC_P4080) static void fdt_fixup_usb(void *fdt) { @@ -752,7 +635,9 @@ void ft_cpu_setup(void *blob, bd_t *bd) ft_fixup_qe_snum(blob); #endif +#ifdef CONFIG_SYS_DPAA_FMAN fdt_fixup_fman_firmware(blob); +#endif #ifdef CONFIG_SYS_NS16550 do_fixup_by_compat_u32(blob, "ns16550", diff --git a/arch/powerpc/cpu/mpc8xxx/Makefile b/arch/powerpc/cpu/mpc8xxx/Makefile index ac45e0e..c5592cd 100644 --- a/arch/powerpc/cpu/mpc8xxx/Makefile +++ b/arch/powerpc/cpu/mpc8xxx/Makefile @@ -24,5 +24,6 @@ obj-$(CONFIG_OF_LIBFDT) += fdt.o obj-$(CONFIG_FSL_LBC) += fsl_lbc.o obj-$(CONFIG_SYS_SRIO) += srio.o obj-$(CONFIG_FSL_LAW) += law.o +obj-$(CONFIG_FSL_CORENET) += fsl_pamu.o pamu_table.o endif diff --git a/arch/powerpc/cpu/mpc8xxx/fsl_pamu.c b/arch/powerpc/cpu/mpc8xxx/fsl_pamu.c new file mode 100644 index 0000000..9421f1e --- /dev/null +++ b/arch/powerpc/cpu/mpc8xxx/fsl_pamu.c @@ -0,0 +1,433 @@ +/* + * FSL PAMU driver + * + * Copyright 2012-2016 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <linux/log2.h> +#include <malloc.h> +#include <asm/fsl_pamu.h> + +struct paace *ppaact; +struct paace *sec; +unsigned long fspi; + +static inline int __ilog2_roundup_64(uint64_t val) +{ + if ((val & (val - 1)) == 0) + return __ilog2_u64(val); + else + return __ilog2_u64(val) + 1; +} + + +static inline int count_lsb_zeroes(unsigned long val) +{ + return ffs(val) - 1; +} + +static unsigned int map_addrspace_size_to_wse(uint64_t addrspace_size) +{ + /* window size is 2^(WSE+1) bytes */ + return count_lsb_zeroes(addrspace_size >> PAMU_PAGE_SHIFT) + + PAMU_PAGE_SHIFT - 1; +} + +static unsigned int map_subwindow_cnt_to_wce(uint32_t subwindow_cnt) +{ + /* window count is 2^(WCE+1) bytes */ + return count_lsb_zeroes(subwindow_cnt) - 1; +} + +static void pamu_setup_default_xfer_to_host_ppaace(struct paace *ppaace) +{ + set_bf(ppaace->addr_bitfields, PAACE_AF_PT, PAACE_PT_PRIMARY); + set_bf(ppaace->domain_attr.to_host.coherency_required, PAACE_DA_HOST_CR, + PAACE_M_COHERENCE_REQ); +} + +static void pamu_setup_default_xfer_to_host_spaace(struct paace *spaace) +{ + set_bf(spaace->addr_bitfields, PAACE_AF_PT, PAACE_PT_SECONDARY); + set_bf(spaace->domain_attr.to_host.coherency_required, PAACE_DA_HOST_CR, + PAACE_M_COHERENCE_REQ); +} + +/** Sets up PPAACE entry for specified liodn + * + * @param[in] liodn Logical IO device number + * @param[in] win_addr starting address of DSA window + * @param[in] win-size size of DSA window + * @param[in] omi Operation mapping index -- if ~omi == 0 then omi + not defined + * @param[in] stashid cache stash id for associated cpu -- if ~stashid == 0 + then stashid not defined + * @param[in] snoopid snoop id for hardware coherency -- if ~snoopid == 0 + then snoopid not defined + * @param[in] subwin_cnt number of sub-windows + * + * @return Returns 0 upon success else error code < 0 returned + */ +static int pamu_config_ppaace(uint32_t liodn, uint64_t win_addr, + uint64_t win_size, uint32_t omi, + uint32_t snoopid, uint32_t stashid, + uint32_t subwin_cnt) +{ + struct paace *ppaace; + + if ((win_size & (win_size - 1)) || win_size < PAMU_PAGE_SIZE) + return -1; + + if (win_addr & (win_size - 1)) + return -2; + + if (liodn > NUM_PPAACT_ENTRIES) { + printf("Entries in PPACT not sufficient\n"); + return -3; + } + + ppaace = &ppaact[liodn]; + + /* window size is 2^(WSE+1) bytes */ + set_bf(ppaace->addr_bitfields, PPAACE_AF_WSE, + map_addrspace_size_to_wse(win_size)); + + pamu_setup_default_xfer_to_host_ppaace(ppaace); + + if (sizeof(phys_addr_t) > 4) + ppaace->wbah = (u64)win_addr >> (PAMU_PAGE_SHIFT + 20); + else + ppaace->wbah = 0; + + set_bf(ppaace->addr_bitfields, PPAACE_AF_WBAL, + (win_addr >> PAMU_PAGE_SHIFT)); + + /* set up operation mapping if it's configured */ + if (omi < OME_NUMBER_ENTRIES) { + set_bf(ppaace->impl_attr, PAACE_IA_OTM, PAACE_OTM_INDEXED); + ppaace->op_encode.index_ot.omi = omi; + } else if (~omi != 0) { + return -3; + } + + /* configure stash id */ + if (~stashid != 0) + set_bf(ppaace->impl_attr, PAACE_IA_CID, stashid); + + /* configure snoop id */ + if (~snoopid != 0) + ppaace->domain_attr.to_host.snpid = snoopid; + + if (subwin_cnt) { + /* window count is 2^(WCE+1) bytes */ + set_bf(ppaace->impl_attr, PAACE_IA_WCE, + map_subwindow_cnt_to_wce(subwin_cnt)); + set_bf(ppaace->addr_bitfields, PPAACE_AF_MW, 0x1); + ppaace->fspi = fspi; + fspi = fspi + DEFAULT_NUM_SUBWINDOWS - 1; + } else { + set_bf(ppaace->addr_bitfields, PAACE_AF_AP, PAACE_AP_PERMS_ALL); + } + + asm volatile("sync" : : : "memory"); + /* Mark the ppace entry valid */ + ppaace->addr_bitfields |= PAACE_V_VALID; + asm volatile("sync" : : : "memory"); + + return 0; +} + +static int pamu_config_spaace(uint32_t liodn, + uint64_t subwin_size, uint64_t subwin_addr, uint64_t size, + uint32_t omi, uint32_t snoopid, uint32_t stashid) +{ + struct paace *paace; + /* Align start addr of subwin to subwindoe size */ + uint64_t sec_addr = subwin_addr & ~(subwin_size - 1); + uint64_t end_addr = subwin_addr + size; + int size_shift = __ilog2_u64(subwin_size); + uint64_t win_size = 0; + uint32_t index, swse; + unsigned long fspi_idx; + + /* Recalculate the size */ + size = end_addr - sec_addr; + + if (!subwin_size) + return -1; + + if (liodn > NUM_PPAACT_ENTRIES) { + printf("LIODN No programmed %d > no. of PPAACT entries %d\n", + liodn, NUM_PPAACT_ENTRIES); + return -1; + } + + while (sec_addr < end_addr) { + debug("sec_addr < end_addr is %llx < %llx\n", sec_addr, + end_addr); + paace = &ppaact[liodn]; + if (!paace) + return -1; + fspi_idx = paace->fspi; + + /* Calculating the win_size here as if we map in index 0, + paace entry woudl need to be programmed for SWSE */ + win_size = end_addr - sec_addr; + win_size = 1 << __ilog2_roundup_64(win_size); + + if (win_size > subwin_size) + win_size = subwin_size; + else if (win_size < PAMU_PAGE_SIZE) + win_size = PAMU_PAGE_SIZE; + + debug("win_size is %llx\n", win_size); + + swse = map_addrspace_size_to_wse(win_size); + index = sec_addr >> size_shift; + + if (index == 0) { + set_bf(paace->win_bitfields, PAACE_WIN_SWSE, swse); + set_bf(paace->addr_bitfields, PAACE_AF_AP, + PAACE_AP_PERMS_ALL); + sec_addr += subwin_size; + continue; + } + + paace = sec + fspi_idx + index - 1; + + debug("SPAACT:Writing at location %p, index %d\n", paace, + index); + + pamu_setup_default_xfer_to_host_spaace(paace); + set_bf(paace->addr_bitfields, SPAACE_AF_LIODN, liodn); + set_bf(paace->addr_bitfields, PAACE_AF_AP, PAACE_AP_PERMS_ALL); + + /* configure snoop id */ + if (~snoopid != 0) + paace->domain_attr.to_host.snpid = snoopid; + + if (paace->addr_bitfields & PAACE_V_VALID) { + debug("Reached overlap condition\n"); + debug("%d < %d\n", get_bf(paace->win_bitfields, + PAACE_WIN_SWSE), swse); + if (get_bf(paace->win_bitfields, PAACE_WIN_SWSE) < swse) + set_bf(paace->win_bitfields, PAACE_WIN_SWSE, + swse); + } else { + set_bf(paace->win_bitfields, PAACE_WIN_SWSE, swse); + } + + paace->addr_bitfields |= PAACE_V_VALID; + sec_addr += subwin_size; + } + + return 0; +} + +int pamu_init(void) +{ + u32 base_addr = CONFIG_SYS_PAMU_ADDR; + struct ccsr_pamu *regs; + u32 i = 0; + u64 ppaact_phys, ppaact_lim, ppaact_size; + u64 spaact_phys, spaact_lim, spaact_size; + + ppaact_size = sizeof(struct paace) * NUM_PPAACT_ENTRIES; + spaact_size = sizeof(struct paace) * NUM_SPAACT_ENTRIES; + + /* Allocate space for Primary PAACT Table */ + ppaact = memalign(PAMU_TABLE_ALIGNMENT, ppaact_size); + if (!ppaact) + return -1; + memset(ppaact, 0, ppaact_size); + + /* Allocate space for Secondary PAACT Table */ + sec = memalign(PAMU_TABLE_ALIGNMENT, spaact_size); + if (!sec) + return -1; + memset(sec, 0, spaact_size); + + ppaact_phys = virt_to_phys((void *)ppaact); + ppaact_lim = ppaact_phys + ppaact_size; + + spaact_phys = (uint64_t)virt_to_phys((void *)sec); + spaact_lim = spaact_phys + spaact_size; + + /* Configure all PAMU's */ + for (i = 0; i < CONFIG_NUM_PAMU; i++) { + regs = (struct ccsr_pamu *)base_addr; + + out_be32(®s->ppbah, ppaact_phys >> 32); + out_be32(®s->ppbal, (uint32_t)ppaact_phys); + + out_be32(®s->pplah, (ppaact_lim) >> 32); + out_be32(®s->pplal, (uint32_t)ppaact_lim); + + if (sec != NULL) { + out_be32(®s->spbah, spaact_phys >> 32); + out_be32(®s->spbal, (uint32_t)spaact_phys); + out_be32(®s->splah, spaact_lim >> 32); + out_be32(®s->splal, (uint32_t)spaact_lim); + } + asm volatile("sync" : : : "memory"); + + base_addr += PAMU_OFFSET; + } + + return 0; +} + +void pamu_enable(void) +{ + u32 i = 0; + u32 base_addr = CONFIG_SYS_PAMU_ADDR; + for (i = 0; i < CONFIG_NUM_PAMU; i++) { + setbits_be32((void *)base_addr + PAMU_PCR_OFFSET, + PAMU_PCR_PE); + asm volatile("sync" : : : "memory"); + base_addr += PAMU_OFFSET; + } +} + +void pamu_reset(void) +{ + u32 i = 0; + u32 base_addr = CONFIG_SYS_PAMU_ADDR; + struct ccsr_pamu *regs; + + for (i = 0; i < CONFIG_NUM_PAMU; i++) { + regs = (struct ccsr_pamu *)base_addr; + /* Clear PPAACT Base register */ + out_be32(®s->ppbah, 0); + out_be32(®s->ppbal, 0); + out_be32(®s->pplah, 0); + out_be32(®s->pplal, 0); + out_be32(®s->spbah, 0); + out_be32(®s->spbal, 0); + out_be32(®s->splah, 0); + out_be32(®s->splal, 0); + + clrbits_be32((void *)regs + PAMU_PCR_OFFSET, PAMU_PCR_PE); + asm volatile("sync" : : : "memory"); + base_addr += PAMU_OFFSET; + } +} + +void pamu_disable(void) +{ + u32 i = 0; + u32 base_addr = CONFIG_SYS_PAMU_ADDR; + + + for (i = 0; i < CONFIG_NUM_PAMU; i++) { + clrbits_be32((void *)base_addr + PAMU_PCR_OFFSET, PAMU_PCR_PE); + asm volatile("sync" : : : "memory"); + base_addr += PAMU_OFFSET; + } +} + + +static uint64_t find_max(uint64_t arr[], int num) +{ + int i = 0; + int max = 0; + for (i = 1 ; i < num; i++) + if (arr[max] < arr[i]) + max = i; + + return arr[max]; +} + +static uint64_t find_min(uint64_t arr[], int num) +{ + int i = 0; + int min = 0; + for (i = 1 ; i < num; i++) + if (arr[min] > arr[i]) + min = i; + + return arr[min]; +} + +static uint32_t get_win_cnt(uint64_t size) +{ + uint32_t win_cnt = DEFAULT_NUM_SUBWINDOWS; + + while (win_cnt && (size/win_cnt) < PAMU_PAGE_SIZE) + win_cnt >>= 1; + + return win_cnt; +} + +int config_pamu(struct pamu_addr_tbl *tbl, int num_entries, uint32_t liodn) +{ + int i = 0; + int ret = 0; + uint32_t num_sec_windows = 0; + uint32_t num_windows = 0; + uint64_t min_addr, max_addr; + uint64_t size; + uint64_t subwin_size; + int sizebit; + + min_addr = find_min(tbl->start_addr, num_entries); + max_addr = find_max(tbl->end_addr, num_entries); + size = max_addr - min_addr + 1; + + if (!size) + return -1; + + sizebit = __ilog2_roundup_64(size); + size = 1 << sizebit; + debug("min start_addr is %llx\n", min_addr); + debug("max end_addr is %llx\n", max_addr); + debug("size found is %llx\n", size); + + if (size < PAMU_PAGE_SIZE) + size = PAMU_PAGE_SIZE; + + while (1) { + min_addr = min_addr & ~(size - 1); + if (min_addr + size > max_addr) + break; + size <<= 1; + if (!size) + return -1; + } + debug("PAACT :Base addr is %llx\n", min_addr); + debug("PAACT : Size is %llx\n", size); + num_windows = get_win_cnt(size); + /* For a single window, no spaact entries are required + * sec_sub_window count = 0 */ + if (num_windows > 1) + num_sec_windows = num_windows; + else + num_sec_windows = 0; + + ret = pamu_config_ppaace(liodn, min_addr, + size , -1, -1, -1, num_sec_windows); + + if (ret < 0) + return ret; + + debug("configured ppace\n"); + + if (num_sec_windows) { + subwin_size = size >> count_lsb_zeroes(num_sec_windows); + debug("subwin_size is %llx\n", subwin_size); + + for (i = 0; i < num_entries; i++) { + ret = pamu_config_spaace(liodn, + subwin_size, tbl->start_addr[i] - min_addr, + tbl->size[i], -1, -1, -1); + + if (ret < 0) + return ret; + } + } + + return ret; +} diff --git a/arch/powerpc/cpu/mpc8xxx/pamu_table.c b/arch/powerpc/cpu/mpc8xxx/pamu_table.c new file mode 100644 index 0000000..26c5ea4 --- /dev/null +++ b/arch/powerpc/cpu/mpc8xxx/pamu_table.c @@ -0,0 +1,55 @@ +/* + * Copyright 2012-2016 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/fsl_pamu.h> + +DECLARE_GLOBAL_DATA_PTR; + +void construct_pamu_addr_table(struct pamu_addr_tbl *tbl, int *num_entries) +{ + int i = 0; + int j; + + tbl->start_addr[i] = + (uint64_t)virt_to_phys((void *)CONFIG_SYS_SDRAM_BASE); + tbl->size[i] = (phys_size_t)(min(gd->ram_size, CONFIG_MAX_MEM_MAPPED)); + tbl->end_addr[i] = tbl->start_addr[i] + tbl->size[i] - 1; + + i++; +#ifdef CONFIG_SYS_FLASH_BASE_PHYS + tbl->start_addr[i] = + (uint64_t)virt_to_phys((void *)CONFIG_SYS_FLASH_BASE_PHYS); + tbl->size[i] = 256 * 1024 * 1024; /* 256MB flash */ + tbl->end_addr[i] = tbl->start_addr[i] + tbl->size[i] - 1; + + i++; +#endif + debug("PAMU address\t\t\tsize\n"); + for (j = 0; j < i ; j++) + debug("%llx \t\t\t%llx\n", tbl->start_addr[j], tbl->size[j]); + + *num_entries = i; +} + +int sec_config_pamu_table(uint32_t liodn_ns, uint32_t liodn_s) +{ + struct pamu_addr_tbl tbl; + int num_entries = 0; + int ret = 0; + + construct_pamu_addr_table(&tbl, &num_entries); + + ret = config_pamu(&tbl, num_entries, liodn_ns); + if (ret) + return ret; + + ret = config_pamu(&tbl, num_entries, liodn_s); + if (ret) + return ret; + + return ret; +} diff --git a/arch/powerpc/include/asm/fsl_pamu.h b/arch/powerpc/include/asm/fsl_pamu.h new file mode 100644 index 0000000..93a7cae --- /dev/null +++ b/arch/powerpc/include/asm/fsl_pamu.h @@ -0,0 +1,169 @@ +/* + * Copyright 2012-2016 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __PAMU_H +#define __PAMU_H + +#define CONFIG_NUM_PAMU 16 +#define NUM_PPAACT_ENTRIES 512 +#define NUM_SPAACT_ENTRIES 256 + +/* PAMU_OFFSET to the next pamu space in ccsr */ +#define PAMU_OFFSET 0x1000 + +#define PAMU_TABLE_ALIGNMENT 0x00001000 + +#define PAMU_PAGE_SHIFT 12 +#define PAMU_PAGE_SIZE 4096U + +#define PAACE_M_COHERENCE_REQ 0x01 + +#define PAACE_DA_HOST_CR 0x80 +#define PAACE_DA_HOST_CR_SHIFT 7 + +#define PAACE_AF_PT 0x00000002 +#define PAACE_AF_PT_SHIFT 1 + +#define PAACE_PT_PRIMARY 0x0 +#define PAACE_PT_SECONDARY 0x1 + +#define PPAACE_AF_WBAL 0xfffff000 +#define PPAACE_AF_WBAL_SHIFT 12 + +#define OME_NUMBER_ENTRIES 16 /* based on P4080 2.0 silicon plan */ + +#define PAACE_IA_CID 0x00FF0000 +#define PAACE_IA_CID_SHIFT 16 +#define PAACE_IA_WCE 0x000000F0 +#define PAACE_IA_WCE_SHIFT 4 +#define PAACE_IA_ATM 0x0000000C +#define PAACE_IA_ATM_SHIFT 2 +#define PAACE_IA_OTM 0x00000003 +#define PAACE_IA_OTM_SHIFT 0 + +#define PAACE_OTM_NO_XLATE 0x00 +#define PAACE_OTM_IMMEDIATE 0x01 +#define PAACE_OTM_INDEXED 0x02 +#define PAACE_OTM_RESERVED 0x03 +#define PAACE_ATM_NO_XLATE 0x00 +#define PAACE_ATM_WINDOW_XLATE 0x01 +#define PAACE_ATM_PAGE_XLATE 0x02 +#define PAACE_ATM_WIN_PG_XLATE \ + (PAACE_ATM_WINDOW_XLATE | PAACE_ATM_PAGE_XLATE) +#define PAACE_WIN_TWBAL 0xfffff000 +#define PAACE_WIN_TWBAL_SHIFT 12 +#define PAACE_WIN_SWSE 0x00000fc0 +#define PAACE_WIN_SWSE_SHIFT 6 + +#define PAACE_AF_AP 0x00000018 +#define PAACE_AF_AP_SHIFT 3 +#define PAACE_AF_DD 0x00000004 +#define PAACE_AF_DD_SHIFT 2 +#define PAACE_AF_PT 0x00000002 +#define PAACE_AF_PT_SHIFT 1 +#define PAACE_AF_V 0x00000001 +#define PAACE_AF_V_SHIFT 0 +#define PPAACE_AF_WSE 0x00000fc0 +#define PPAACE_AF_WSE_SHIFT 6 +#define PPAACE_AF_MW 0x00000020 +#define PPAACE_AF_MW_SHIFT 5 + +#define PAACE_AP_PERMS_DENIED 0x0 +#define PAACE_AP_PERMS_QUERY 0x1 +#define PAACE_AP_PERMS_UPDATE 0x2 +#define PAACE_AP_PERMS_ALL 0x3 + +#define SPAACE_AF_LIODN 0xffff0000 +#define SPAACE_AF_LIODN_SHIFT 16 +#define PAACE_V_VALID 0x1 + +#define set_bf(v, m, x) (v = ((v) & ~(m)) | (((x) << \ + (m##_SHIFT)) & (m))) +#define get_bf(v, m) (((v) & (m)) >> (m##_SHIFT)) + +#define DEFAULT_NUM_SUBWINDOWS 128 +#define PAMU_PCR_OFFSET 0xc10 +#define PAMU_PCR_PE 0x40000000 + +struct pamu_addr_tbl { + phys_addr_t start_addr[10]; + phys_addr_t end_addr[10]; + phys_size_t size[10]; +}; + +struct paace { + /* PAACE Offset 0x00 */ + uint32_t wbah; /* only valid for Primary PAACE */ + uint32_t addr_bitfields; /* See P/S PAACE_AF_* */ + + /* PAACE Offset 0x08 */ + /* Interpretation of first 32 bits dependent on DD above */ + union { + struct { + /* Destination ID, see PAACE_DID_* defines */ + uint8_t did; + /* Partition ID */ + uint8_t pid; + /* Snoop ID */ + uint8_t snpid; + /* coherency_required : 1 reserved : 7 */ + uint8_t coherency_required; /* See PAACE_DA_* */ + } to_host; + struct { + /* Destination ID, see PAACE_DID_* defines */ + uint8_t did; + uint8_t reserved1; + uint16_t reserved2; + } to_io; + } domain_attr; + + /* Implementation attributes + window count + address & operation + * translation modes + */ + uint32_t impl_attr; /* See PAACE_IA_* */ + + /* PAACE Offset 0x10 */ + /* Translated window base address */ + uint32_t twbah; + uint32_t win_bitfields; /* See PAACE_WIN_* */ + + /* PAACE Offset 0x18 */ + /* first secondary paace entry */ + uint32_t fspi; /* only valid for Primary PAACE */ + union { + struct { + uint8_t ioea; + uint8_t moea; + uint8_t ioeb; + uint8_t moeb; + } immed_ot; + struct { + uint16_t reserved; + uint16_t omi; + } index_ot; + } op_encode; + + /* PAACE Offset 0x20 */ + uint32_t reserved1[2]; /* not currently implemented */ + + /* PAACE Offset 0x28 */ + uint32_t reserved2[2]; /* not currently implemented */ + + /* PAACE Offset 0x30 */ + uint32_t reserved3[2]; /* not currently implemented */ + + /* PAACE Offset 0x38 */ + uint32_t reserved4[2]; /* not currently implemented */ + +}; + +int pamu_init(void); +void pamu_enable(void); +void pamu_disable(void); +int config_pamu(struct pamu_addr_tbl *tbl, int num_entries, uint32_t liodn); +int sec_config_pamu_table(uint32_t liodn_ns, uint32_t liodn_s); + +#endif diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index fd8aba4..53ca6d9 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -1935,7 +1935,6 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022) u8 res24[64]; u32 pblsr; /* Preboot loader status */ u32 pamubypenr; /* PAMU bypass enable */ -#define FSL_CORENET_PAMU_BYPASS 0xffff0000 u32 dmacr1; /* DMA control */ u8 res25[4]; u32 gensr1; /* General status */ @@ -2774,6 +2773,21 @@ typedef struct ccsr_pme { u8 res4[0x400]; } ccsr_pme_t; +struct ccsr_pamu { + u32 ppbah; + u32 ppbal; + u32 pplah; + u32 pplal; + u32 spbah; + u32 spbal; + u32 splah; + u32 splal; + u32 obah; + u32 obal; + u32 olah; + u32 olal; +}; + #ifdef CONFIG_SYS_FSL_RAID_ENGINE struct ccsr_raide { u8 res0[0x543]; @@ -2854,6 +2868,7 @@ struct ccsr_pman { #define CONFIG_SYS_FSL_CORENET_SERDES4_OFFSET 0xED000 #define CONFIG_SYS_FSL_CPC_OFFSET 0x10000 #define CONFIG_SYS_FSL_SCFG_OFFSET 0xFC000 +#define CONFIG_SYS_FSL_PAMU_OFFSET 0x20000 #define CONFIG_SYS_MPC85xx_DMA1_OFFSET 0x100000 #define CONFIG_SYS_MPC85xx_DMA2_OFFSET 0x101000 #define CONFIG_SYS_MPC85xx_DMA3_OFFSET 0x102000 @@ -3067,6 +3082,8 @@ struct ccsr_pman { (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_FM2_OFFSET) #define CONFIG_SYS_FSL_SRIO_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_SRIO_OFFSET) +#define CONFIG_SYS_PAMU_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_PAMU_OFFSET) #define CONFIG_SYS_PCI1_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCI1_OFFSET) diff --git a/board/BuR/common/common.c b/board/BuR/common/common.c index 441465c..ce4acc1 100644 --- a/board/BuR/common/common.c +++ b/board/BuR/common/common.c @@ -12,7 +12,6 @@ #include <version.h> #include <common.h> #include <errno.h> -#include <spl.h> #include <asm/arch/cpu.h> #include <asm/arch/hardware.h> #include <asm/arch/omap.h> @@ -640,8 +639,7 @@ static struct cpsw_platform_data cpsw_data = { }; #endif /* CONFIG_DRIVER_TI_CPSW, ... */ -#if defined(CONFIG_DRIVER_TI_CPSW) - +#if defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD) int board_eth_init(bd_t *bis) { int rv = 0; @@ -658,8 +656,6 @@ int board_eth_init(bd_t *bis) mac_addr[4] = mac_lo & 0xFF; mac_addr[5] = (mac_lo & 0xFF00) >> 8; -#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ - (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)) if (!getenv("ethaddr")) { #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_USE_FDT) printf("<ethaddr> not set. trying DTB ... "); @@ -685,10 +681,9 @@ int board_eth_init(bd_t *bis) printf("Error %d registering CPSW switch\n", rv); return 0; } -#endif /* CONFIG_DRIVER_TI_CPSW, ... */ return rv; } -#endif /* CONFIG_DRIVER_TI_CPSW */ +#endif /* defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD) */ #if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD) int board_mmc_init(bd_t *bis) { diff --git a/board/compulab/cm_t43/Makefile b/board/compulab/cm_t43/Makefile index 3993689..c749659 100644 --- a/board/compulab/cm_t43/Makefile +++ b/board/compulab/cm_t43/Makefile @@ -6,4 +6,8 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-y += board.o mux.o +ifdef CONFIG_SPL_BUILD +obj-y += spl.o mux.o +else +obj-y += cm_t43.o mux.o +endif diff --git a/board/compulab/cm_t43/cm_t43.c b/board/compulab/cm_t43/cm_t43.c new file mode 100644 index 0000000..0d5da6f --- /dev/null +++ b/board/compulab/cm_t43/cm_t43.c @@ -0,0 +1,151 @@ +/* + * Copyright (C) 2015 Compulab, Ltd. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <i2c.h> +#include <miiphy.h> +#include <cpsw.h> +#include <asm/gpio.h> +#include <asm/arch/sys_proto.h> +#include <asm/emif.h> +#include <power/pmic.h> +#include <power/tps65218.h> +#include "board.h" + +DECLARE_GLOBAL_DATA_PTR; + +static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; + +/* setup board specific PMIC */ +int power_init_board(void) +{ + struct pmic *p; + uchar tps_status = 0; + + power_tps65218_init(I2C_PMIC); + p = pmic_get("TPS65218_PMIC"); + if (p && !pmic_probe(p)) { + puts("PMIC: TPS65218\n"); + /* We don't care if fseal is locked, but we do need it set */ + tps65218_lock_fseal(); + tps65218_reg_read(TPS65218_STATUS, &tps_status); + if (!(tps_status & TPS65218_FSEAL)) + printf("WARNING: RTC not backed by battery!\n"); + } + + return 0; +} + +int board_init(void) +{ + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; + gpmc_init(); + set_i2c_pin_mux(); + i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); + i2c_probe(TPS65218_CHIP_PM); + + return 0; +} + +#ifdef CONFIG_DRIVER_TI_CPSW + +static void cpsw_control(int enabled) +{ + return; +} + +static struct cpsw_slave_data cpsw_slaves[] = { + { + .slave_reg_ofs = 0x208, + .sliver_reg_ofs = 0xd80, + .phy_addr = 0, + .phy_if = PHY_INTERFACE_MODE_RGMII, + }, + { + .slave_reg_ofs = 0x308, + .sliver_reg_ofs = 0xdc0, + .phy_addr = 1, + .phy_if = PHY_INTERFACE_MODE_RGMII, + }, +}; + +static struct cpsw_platform_data cpsw_data = { + .mdio_base = CPSW_MDIO_BASE, + .cpsw_base = CPSW_BASE, + .mdio_div = 0xff, + .channels = 8, + .cpdma_reg_ofs = 0x800, + .slaves = 2, + .slave_data = cpsw_slaves, + .ale_reg_ofs = 0xd00, + .ale_entries = 1024, + .host_port_reg_ofs = 0x108, + .hw_stats_reg_ofs = 0x900, + .bd_ram_ofs = 0x2000, + .mac_control = (1 << 5), + .control = cpsw_control, + .host_port_num = 0, + .version = CPSW_CTRL_VERSION_2, +}; + +#define GPIO_PHY1_RST 170 +#define GPIO_PHY2_RST 168 + +int board_phy_config(struct phy_device *phydev) +{ + unsigned short val; + + /* introduce tx clock delay */ + phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x5); + val = phy_read(phydev, MDIO_DEVAD_NONE, 0x1e); + val |= 0x0100; + phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, val); + + if (phydev->drv->config) + return phydev->drv->config(phydev); + + return 0; +} + +static void board_phy_init(void) +{ + set_mdio_pin_mux(); + writel(0x40003, 0x44e10a74); /* Mux pin as clkout2 */ + writel(0x10006, 0x44df4108); /* Select EXTDEV as clock source */ + writel(0x4, 0x44df2e60); /* Set EXTDEV as MNbypass */ + + /* For revision A */ + writel(0x2000009, 0x44df2e6c); + writel(0x38a, 0x44df2e70); + + mdelay(10); + + gpio_request(GPIO_PHY1_RST, "phy1_rst"); + gpio_request(GPIO_PHY2_RST, "phy2_rst"); + gpio_direction_output(GPIO_PHY1_RST, 0); + gpio_direction_output(GPIO_PHY2_RST, 0); + mdelay(2); + + gpio_set_value(GPIO_PHY1_RST, 1); + gpio_set_value(GPIO_PHY2_RST, 1); + mdelay(2); +} + +int board_eth_init(bd_t *bis) +{ + int rv; + + set_rgmii_pin_mux(); + writel(RGMII_MODE_ENABLE | RGMII_INT_DELAY, &cdev->miisel); + board_phy_init(); + + rv = cpsw_register(&cpsw_data); + if (rv < 0) + printf("Error %d registering CPSW switch\n", rv); + + return rv; +} +#endif diff --git a/board/compulab/cm_t43/board.c b/board/compulab/cm_t43/spl.c index 4272c45..b7d118e 100644 --- a/board/compulab/cm_t43/board.c +++ b/board/compulab/cm_t43/spl.c @@ -1,31 +1,21 @@ /* - * Copyright (C) 2015 Compulab, Ltd. + * Copyright (C) 2016 Compulab, Ltd. * * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> -#include <i2c.h> -#include <miiphy.h> -#include <cpsw.h> #include <spl.h> +#include <i2c.h> #include <asm/arch/clock.h> -#include <asm/arch/sys_proto.h> -#include <asm/arch/mux.h> #include <asm/arch/ddr_defs.h> -#include <asm/errno.h> #include <asm/gpio.h> -#include <asm/emif.h> #include <power/pmic.h> #include <power/tps65218.h> #include "board.h" DECLARE_GLOBAL_DATA_PTR; -static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; - -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - const struct dpll_params dpll_mpu = { 800, 24, 1, -1, -1, -1, -1 }; const struct dpll_params dpll_core = { 1000, 24, -1, -1, 10, 8, 4 }; const struct dpll_params dpll_per = { 960, 24, 5, -1, -1, -1, -1 }; @@ -114,22 +104,21 @@ const struct dpll_params *get_dpll_per_params(void) return &dpll_per; } -static void enable_vtt_regulator(void) +void scale_vcores(void) { - u32 temp; + set_i2c_pin_mux(); + i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); + if (i2c_probe(TPS65218_CHIP_PM)) + return; - writel(GPIO_CTRL_ENABLEMODULE, AM33XX_GPIO5_BASE + OMAP_GPIO_CTRL); - writel(GPIO_SETDATAOUT(7), AM33XX_GPIO5_BASE + OMAP_GPIO_SETDATAOUT); - temp = readl(AM33XX_GPIO5_BASE + OMAP_GPIO_OE); - temp = temp & ~(GPIO_OE_ENABLE(7)); - writel(temp, AM33XX_GPIO5_BASE + OMAP_GPIO_OE); + tps65218_voltage_update(TPS65218_DCDC1, TPS65218_DCDC_VOLT_SEL_1100MV); + tps65218_voltage_update(TPS65218_DCDC2, TPS65218_DCDC_VOLT_SEL_1100MV); } void sdram_init(void) { unsigned long ram_size; - enable_vtt_regulator(); config_ddr(0, &ioregs_ddr3, NULL, NULL, &ddr3_emif_regs, 0); ram_size = get_ram_size((long int *)CONFIG_SYS_SDRAM_BASE, 0x80000000); if (ram_size == 0x80000000 || @@ -145,128 +134,4 @@ void sdram_init(void) hang(); } -#endif - -/* setup board specific PMIC */ -int power_init_board(void) -{ - struct pmic *p; - - power_tps65218_init(I2C_PMIC); - p = pmic_get("TPS65218_PMIC"); - if (p && !pmic_probe(p)) - puts("PMIC: TPS65218\n"); - - return 0; -} -int board_init(void) -{ - gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - gpmc_init(); - set_i2c_pin_mux(); - i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); - i2c_probe(TPS65218_CHIP_PM); - - return 0; -} - -#ifdef CONFIG_DRIVER_TI_CPSW - -static void cpsw_control(int enabled) -{ - return; -} - -static struct cpsw_slave_data cpsw_slaves[] = { - { - .slave_reg_ofs = 0x208, - .sliver_reg_ofs = 0xd80, - .phy_addr = 0, - .phy_if = PHY_INTERFACE_MODE_RGMII, - }, - { - .slave_reg_ofs = 0x308, - .sliver_reg_ofs = 0xdc0, - .phy_addr = 1, - .phy_if = PHY_INTERFACE_MODE_RGMII, - }, -}; - -static struct cpsw_platform_data cpsw_data = { - .mdio_base = CPSW_MDIO_BASE, - .cpsw_base = CPSW_BASE, - .mdio_div = 0xff, - .channels = 8, - .cpdma_reg_ofs = 0x800, - .slaves = 2, - .slave_data = cpsw_slaves, - .ale_reg_ofs = 0xd00, - .ale_entries = 1024, - .host_port_reg_ofs = 0x108, - .hw_stats_reg_ofs = 0x900, - .bd_ram_ofs = 0x2000, - .mac_control = (1 << 5), - .control = cpsw_control, - .host_port_num = 0, - .version = CPSW_CTRL_VERSION_2, -}; - -#define GPIO_PHY1_RST 170 -#define GPIO_PHY2_RST 168 - -int board_phy_config(struct phy_device *phydev) -{ - unsigned short val; - - /* introduce tx clock delay */ - phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x5); - val = phy_read(phydev, MDIO_DEVAD_NONE, 0x1e); - val |= 0x0100; - phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, val); - - if (phydev->drv->config) - return phydev->drv->config(phydev); - - return 0; -} - -static void board_phy_init(void) -{ - set_mdio_pin_mux(); - writel(0x40003, 0x44e10a74); /* Mux pin as clkout2 */ - writel(0x10006, 0x44df4108); /* Select EXTDEV as clock source */ - writel(0x4, 0x44df2e60); /* Set EXTDEV as MNbypass */ - - /* For revision A */ - writel(0x2000009, 0x44df2e6c); - writel(0x38a, 0x44df2e70); - - mdelay(10); - - gpio_request(GPIO_PHY1_RST, "phy1_rst"); - gpio_request(GPIO_PHY2_RST, "phy2_rst"); - gpio_direction_output(GPIO_PHY1_RST, 0); - gpio_direction_output(GPIO_PHY2_RST, 0); - mdelay(2); - - gpio_set_value(GPIO_PHY1_RST, 1); - gpio_set_value(GPIO_PHY2_RST, 1); - mdelay(2); -} - -int board_eth_init(bd_t *bis) -{ - int rv; - - set_rgmii_pin_mux(); - writel(RGMII_MODE_ENABLE | RGMII_INT_DELAY, &cdev->miisel); - board_phy_init(); - - rv = cpsw_register(&cpsw_data); - if (rv < 0) - printf("Error %d registering CPSW switch\n", rv); - - return rv; -} -#endif diff --git a/board/freescale/common/arm_sleep.c b/board/freescale/common/arm_sleep.c index a498c65..71ed15e 100644 --- a/board/freescale/common/arm_sleep.c +++ b/board/freescale/common/arm_sleep.c @@ -19,7 +19,7 @@ #include "sleep.h" #ifdef CONFIG_U_QE -#include "../../../drivers/qe/qe.h" +#include <fsl_qe.h> #endif DECLARE_GLOBAL_DATA_PTR; diff --git a/board/freescale/common/mpc85xx_sleep.c b/board/freescale/common/mpc85xx_sleep.c index e9cbd51..498d770 100644 --- a/board/freescale/common/mpc85xx_sleep.c +++ b/board/freescale/common/mpc85xx_sleep.c @@ -8,7 +8,7 @@ #include <asm/immap_85xx.h> #include "sleep.h" #ifdef CONFIG_U_QE -#include "../../../drivers/qe/qe.h" +#include <fsl_qe.h> #endif DECLARE_GLOBAL_DATA_PTR; diff --git a/board/freescale/ls1021aqds/MAINTAINERS b/board/freescale/ls1021aqds/MAINTAINERS index 820d322..c37ab99 100644 --- a/board/freescale/ls1021aqds/MAINTAINERS +++ b/board/freescale/ls1021aqds/MAINTAINERS @@ -8,6 +8,7 @@ F: configs/ls1021aqds_ddr4_nor_defconfig F: configs/ls1021aqds_ddr4_nor_lpuart_defconfig F: configs/ls1021aqds_nor_SECURE_BOOT_defconfig F: configs/ls1021aqds_nor_lpuart_defconfig -F: configs/ls1021aqds_sdcard_defconfig +F: configs/ls1021aqds_sdcard_ifc_defconfig +F: configs/ls1021aqds_sdcard_qspi_defconfig F: configs/ls1021aqds_qspi_defconfig F: configs/ls1021aqds_nand_defconfig diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c index 5f4ec9d..dbea0bf 100644 --- a/board/freescale/ls1021aqds/ls1021aqds.c +++ b/board/freescale/ls1021aqds/ls1021aqds.c @@ -10,7 +10,6 @@ #include <asm/arch/immap_ls102xa.h> #include <asm/arch/clock.h> #include <asm/arch/fsl_serdes.h> -#include <asm/arch/ls102xa_stream_id.h> #include <asm/arch/ls102xa_soc.h> #include <asm/arch/ls102xa_devdis.h> #include <asm/arch/ls102xa_sata.h> @@ -28,7 +27,7 @@ #include "../common/qixis.h" #include "ls1021aqds_qixis.h" #ifdef CONFIG_U_QE -#include "../../../drivers/qe/qe.h" +#include <fsl_qe.h> #endif #define PIN_MUX_SEL_CAN 0x03 @@ -61,7 +60,7 @@ enum { int checkboard(void) { -#ifndef CONFIG_QSPI_BOOT +#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) char buf[64]; #endif #if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_QSPI_BOOT) @@ -90,7 +89,7 @@ int checkboard(void) printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH); #endif -#ifndef CONFIG_QSPI_BOOT +#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) printf("Sys ID:0x%02x, Sys Ver: 0x%02x\n", QIXIS_READ(id), QIXIS_READ(arch)); @@ -426,42 +425,6 @@ int misc_init_r(void) return 0; } -struct liodn_id_table sec_liodn_tbl[] = { - SET_SEC_JR_LIODN_ENTRY(0, 0x10, 0x10), - SET_SEC_JR_LIODN_ENTRY(1, 0x10, 0x10), - SET_SEC_JR_LIODN_ENTRY(2, 0x10, 0x10), - SET_SEC_JR_LIODN_ENTRY(3, 0x10, 0x10), - SET_SEC_RTIC_LIODN_ENTRY(a, 0x10), - SET_SEC_RTIC_LIODN_ENTRY(b, 0x10), - SET_SEC_RTIC_LIODN_ENTRY(c, 0x10), - SET_SEC_RTIC_LIODN_ENTRY(d, 0x10), - SET_SEC_DECO_LIODN_ENTRY(0, 0x10, 0x10), - SET_SEC_DECO_LIODN_ENTRY(1, 0x10, 0x10), - SET_SEC_DECO_LIODN_ENTRY(2, 0x10, 0x10), - SET_SEC_DECO_LIODN_ENTRY(3, 0x10, 0x10), - SET_SEC_DECO_LIODN_ENTRY(4, 0x10, 0x10), - SET_SEC_DECO_LIODN_ENTRY(5, 0x10, 0x10), - SET_SEC_DECO_LIODN_ENTRY(6, 0x10, 0x10), - SET_SEC_DECO_LIODN_ENTRY(7, 0x10, 0x10), -}; - -struct smmu_stream_id dev_stream_id[] = { - { 0x100, 0x01, "ETSEC MAC1" }, - { 0x104, 0x02, "ETSEC MAC2" }, - { 0x108, 0x03, "ETSEC MAC3" }, - { 0x10c, 0x04, "PEX1" }, - { 0x110, 0x05, "PEX2" }, - { 0x114, 0x06, "qDMA" }, - { 0x118, 0x07, "SATA" }, - { 0x11c, 0x08, "USB3" }, - { 0x120, 0x09, "QE" }, - { 0x124, 0x0a, "eSDHC" }, - { 0x128, 0x0b, "eMA" }, - { 0x14c, 0x0c, "2D-ACE" }, - { 0x150, 0x0d, "USB2" }, - { 0x18c, 0x0e, "DEBUG" }, -}; - int board_init(void) { struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR; @@ -481,10 +444,7 @@ int board_init(void) config_serdes_mux(); #endif - ls1021x_config_caam_stream_id(sec_liodn_tbl, - ARRAY_SIZE(sec_liodn_tbl)); - ls102xa_config_smmu_stream_id(dev_stream_id, - ARRAY_SIZE(dev_stream_id)); + ls102xa_smmu_stream_id_init(); #ifdef CONFIG_LAYERSCAPE_NS_ACCESS enable_layerscape_ns_access(); diff --git a/board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg b/board/freescale/ls1021aqds/ls102xa_rcw_sd_ifc.cfg index 9d99bd8..9d99bd8 100644 --- a/board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg +++ b/board/freescale/ls1021aqds/ls102xa_rcw_sd_ifc.cfg diff --git a/board/freescale/ls1021aqds/ls102xa_rcw_sd_qspi.cfg b/board/freescale/ls1021aqds/ls102xa_rcw_sd_qspi.cfg new file mode 100644 index 0000000..2bd398c --- /dev/null +++ b/board/freescale/ls1021aqds/ls102xa_rcw_sd_qspi.cfg @@ -0,0 +1,14 @@ +#PBL preamble and RCW header +aa55aa55 01ee0100 + +#enable IFC, disable QSPI and DSPI +#0608000a 00000000 00000000 00000000 +#60000000 00407900 60040a00 21046000 +#00000000 00000000 00000000 00038000 +#00000000 001b7200 00000000 00000000 + +#disable IFC, enable QSPI and DSPI +0608000a 00000000 00000000 00000000 +60000000 00407900 60040a00 21046000 +00000000 00000000 00000000 00038000 +20024800 001b7200 00000000 00000000 diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c index 616e0bf..c69c9cb 100644 --- a/board/freescale/ls1021atwr/ls1021atwr.c +++ b/board/freescale/ls1021atwr/ls1021atwr.c @@ -10,7 +10,6 @@ #include <asm/arch/immap_ls102xa.h> #include <asm/arch/clock.h> #include <asm/arch/fsl_serdes.h> -#include <asm/arch/ls102xa_stream_id.h> #include <asm/arch/ls102xa_devdis.h> #include <asm/arch/ls102xa_soc.h> #include <asm/arch/ls102xa_sata.h> @@ -28,7 +27,7 @@ #include <spl.h> #include "../common/sleep.h" #ifdef CONFIG_U_QE -#include "../../../drivers/qe/qe.h" +#include <fsl_qe.h> #endif #include <fsl_validate.h> @@ -448,43 +447,6 @@ void board_init_f(ulong dummy) } #endif - -struct liodn_id_table sec_liodn_tbl[] = { - SET_SEC_JR_LIODN_ENTRY(0, 0x10, 0x10), - SET_SEC_JR_LIODN_ENTRY(1, 0x10, 0x10), - SET_SEC_JR_LIODN_ENTRY(2, 0x10, 0x10), - SET_SEC_JR_LIODN_ENTRY(3, 0x10, 0x10), - SET_SEC_RTIC_LIODN_ENTRY(a, 0x10), - SET_SEC_RTIC_LIODN_ENTRY(b, 0x10), - SET_SEC_RTIC_LIODN_ENTRY(c, 0x10), - SET_SEC_RTIC_LIODN_ENTRY(d, 0x10), - SET_SEC_DECO_LIODN_ENTRY(0, 0x10, 0x10), - SET_SEC_DECO_LIODN_ENTRY(1, 0x10, 0x10), - SET_SEC_DECO_LIODN_ENTRY(2, 0x10, 0x10), - SET_SEC_DECO_LIODN_ENTRY(3, 0x10, 0x10), - SET_SEC_DECO_LIODN_ENTRY(4, 0x10, 0x10), - SET_SEC_DECO_LIODN_ENTRY(5, 0x10, 0x10), - SET_SEC_DECO_LIODN_ENTRY(6, 0x10, 0x10), - SET_SEC_DECO_LIODN_ENTRY(7, 0x10, 0x10), -}; - -struct smmu_stream_id dev_stream_id[] = { - { 0x100, 0x01, "ETSEC MAC1" }, - { 0x104, 0x02, "ETSEC MAC2" }, - { 0x108, 0x03, "ETSEC MAC3" }, - { 0x10c, 0x04, "PEX1" }, - { 0x110, 0x05, "PEX2" }, - { 0x114, 0x06, "qDMA" }, - { 0x118, 0x07, "SATA" }, - { 0x11c, 0x08, "USB3" }, - { 0x120, 0x09, "QE" }, - { 0x124, 0x0a, "eSDHC" }, - { 0x128, 0x0b, "eMA" }, - { 0x14c, 0x0c, "2D-ACE" }, - { 0x150, 0x0d, "USB2" }, - { 0x18c, 0x0e, "DEBUG" }, -}; - #ifdef CONFIG_DEEP_SLEEP /* program the regulator (MC34VR500) to support deep sleep */ void ls1twr_program_regulator(void) @@ -525,10 +487,7 @@ int board_init(void) #endif #endif - ls1021x_config_caam_stream_id(sec_liodn_tbl, - ARRAY_SIZE(sec_liodn_tbl)); - ls102xa_config_smmu_stream_id(dev_stream_id, - ARRAY_SIZE(dev_stream_id)); + ls102xa_smmu_stream_id_init(); #ifdef CONFIG_LAYERSCAPE_NS_ACCESS enable_layerscape_ns_access(); diff --git a/board/freescale/ls1043aqds/ls1043aqds.c b/board/freescale/ls1043aqds/ls1043aqds.c index 01db078..a72fe52 100644 --- a/board/freescale/ls1043aqds/ls1043aqds.c +++ b/board/freescale/ls1043aqds/ls1043aqds.c @@ -223,10 +223,25 @@ void board_retimer_init(void) int board_early_init_f(void) { +#ifdef CONFIG_HAS_FSL_XHCI_USB + struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR; + u32 usb_pwrfault; +#endif #ifdef CONFIG_LPUART u8 uart; #endif fsl_lsch2_early_init_f(); + +#ifdef CONFIG_HAS_FSL_XHCI_USB + out_be32(&scfg->rcwpmuxcr0, 0x3333); + out_be32(&scfg->usbdrvvbus_selcr, SCFG_USBDRVVBUS_SELCR_USB1); + usb_pwrfault = + (SCFG_USBPWRFAULT_SHARED << SCFG_USBPWRFAULT_USB3_SHIFT) | + (SCFG_USBPWRFAULT_SHARED << SCFG_USBPWRFAULT_USB2_SHIFT) | + (SCFG_USBPWRFAULT_SHARED << SCFG_USBPWRFAULT_USB1_SHIFT); + out_be32(&scfg->usbpwrfault_selcr, usb_pwrfault); +#endif + #ifdef CONFIG_LPUART /* We use lpuart0 as system console */ uart = QIXIS_READ(brdcfg[14]); diff --git a/board/freescale/ls1043ardb/ls1043ardb.c b/board/freescale/ls1043ardb/ls1043ardb.c index c8f723a..66d974a 100644 --- a/board/freescale/ls1043ardb/ls1043ardb.c +++ b/board/freescale/ls1043ardb/ls1043ardb.c @@ -21,6 +21,10 @@ #include <environment.h> #include <fsl_sec.h> #include "cpld.h" +#ifdef CONFIG_U_QE +#include <fsl_qe.h> +#endif + DECLARE_GLOBAL_DATA_PTR; @@ -71,23 +75,8 @@ int dram_init(void) int board_early_init_f(void) { - struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR; - u32 usb_pwrfault; - fsl_lsch2_early_init_f(); -#ifdef CONFIG_HAS_FSL_XHCI_USB - out_be32(&scfg->rcwpmuxcr0, 0x3333); - out_be32(&scfg->usbdrvvbus_selcr, SCFG_USBDRVVBUS_SELCR_USB1); - usb_pwrfault = (SCFG_USBPWRFAULT_DEDICATED << - SCFG_USBPWRFAULT_USB3_SHIFT) | - (SCFG_USBPWRFAULT_DEDICATED << - SCFG_USBPWRFAULT_USB2_SHIFT) | - (SCFG_USBPWRFAULT_SHARED << - SCFG_USBPWRFAULT_USB1_SHIFT); - out_be32(&scfg->usbpwrfault_selcr, usb_pwrfault); -#endif - return 0; } @@ -113,11 +102,36 @@ int board_init(void) enable_layerscape_ns_access(); #endif +#ifdef CONFIG_U_QE + u_qe_init(); +#endif + return 0; } int config_board_mux(void) { + struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR; + u32 usb_pwrfault; + + if (hwconfig("qe-hdlc")) { + out_be32(&scfg->rcwpmuxcr0, + (in_be32(&scfg->rcwpmuxcr0) & ~0xff00) | 0x6600); + printf("Assign to qe-hdlc clk, rcwpmuxcr0=%x\n", + in_be32(&scfg->rcwpmuxcr0)); + } else { +#ifdef CONFIG_HAS_FSL_XHCI_USB + out_be32(&scfg->rcwpmuxcr0, 0x3333); + out_be32(&scfg->usbdrvvbus_selcr, SCFG_USBDRVVBUS_SELCR_USB1); + usb_pwrfault = (SCFG_USBPWRFAULT_DEDICATED << + SCFG_USBPWRFAULT_USB3_SHIFT) | + (SCFG_USBPWRFAULT_DEDICATED << + SCFG_USBPWRFAULT_USB2_SHIFT) | + (SCFG_USBPWRFAULT_SHARED << + SCFG_USBPWRFAULT_USB1_SHIFT); + out_be32(&scfg->usbpwrfault_selcr, usb_pwrfault); +#endif + } return 0; } @@ -144,6 +158,16 @@ int misc_init_r(void) } #endif +void fdt_del_qe(void *blob) +{ + int nodeoff = 0; + + while ((nodeoff = fdt_node_offset_by_compatible(blob, 0, + "fsl,qe")) >= 0) { + fdt_del_node(blob, nodeoff); + } +} + int ft_board_setup(void *blob, bd_t *bd) { u64 base[CONFIG_NR_DRAM_BANKS]; @@ -161,6 +185,23 @@ int ft_board_setup(void *blob, bd_t *bd) #ifdef CONFIG_SYS_DPAA_FMAN fdt_fixup_fman_ethernet(blob); #endif + + /* + * qe-hdlc and usb multi-use the pins, + * when set hwconfig to qe-hdlc, delete usb node. + */ + if (hwconfig("qe-hdlc")) +#ifdef CONFIG_HAS_FSL_XHCI_USB + fdt_del_node_and_alias(blob, "usb1"); +#endif + /* + * qe just support qe-uart and qe-hdlc, + * if qe-uart and qe-hdlc are not set in hwconfig, + * delete qe node. + */ + if (!hwconfig("qe-uart") && !hwconfig("qe-hdlc")) + fdt_del_qe(blob); + return 0; } diff --git a/board/logicpd/omap3som/omap3logic.c b/board/logicpd/omap3som/omap3logic.c index b5c44f9..668f684 100644 --- a/board/logicpd/omap3som/omap3logic.c +++ b/board/logicpd/omap3som/omap3logic.c @@ -228,6 +228,30 @@ int board_init(void) return 0; } +#ifdef CONFIG_BOARD_LATE_INIT +int board_late_init(void) +{ + switch (gd->bd->bi_arch_number) { + case MACH_TYPE_DM3730_TORPEDO: + setenv("fdtimage", "logicpd-torpedo-37xx-devkit.dtb"); + break; + case MACH_TYPE_DM3730_SOM_LV: + setenv("fdtimage", "logicpd-som-lv-37xx-devkit.dtb"); + break; + case MACH_TYPE_OMAP3_TORPEDO: + setenv("fdtimage", "logicpd-torpedo-35xx-devkit.dtb"); + break; + case MACH_TYPE_OMAP3530_LV_SOM: + setenv("fdtimage", "logicpd-som-lv-35xx-devkit.dtb"); + break; + default: + /* unknown machine type */ + break; + } + return 0; +} +#endif + #if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD) int board_mmc_init(bd_t *bis) { diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c index 7f4fe64..1d3a4e0 100644 --- a/board/raspberrypi/rpi/rpi.c +++ b/board/raspberrypi/rpi/rpi.c @@ -5,6 +5,7 @@ */ #include <common.h> +#include <inttypes.h> #include <config.h> #include <dm.h> #include <fdt_support.h> @@ -56,6 +57,12 @@ struct msg_get_board_rev { u32 end_tag; }; +struct msg_get_board_serial { + struct bcm2835_mbox_hdr hdr; + struct bcm2835_mbox_tag_get_board_serial get_board_serial; + u32 end_tag; +}; + struct msg_get_mac_address { struct bcm2835_mbox_hdr hdr; struct bcm2835_mbox_tag_get_mac_address get_mac_address; @@ -281,6 +288,30 @@ static void set_board_info(void) } #endif /* CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG */ +static void set_serial_number(void) +{ + ALLOC_CACHE_ALIGN_BUFFER(struct msg_get_board_serial, msg, 1); + int ret; + char serial_string[17] = { 0 }; + + if (getenv("serial#")) + return; + + BCM2835_MBOX_INIT_HDR(msg); + BCM2835_MBOX_INIT_TAG_NO_REQ(&msg->get_board_serial, GET_BOARD_SERIAL); + + ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg->hdr); + if (ret) { + printf("bcm2835: Could not query board serial\n"); + /* Ignore error; not critical */ + return; + } + + snprintf(serial_string, sizeof(serial_string), "%016" PRIx64, + msg->get_board_serial.body.resp.serial); + setenv("serial#", serial_string); +} + int misc_init_r(void) { set_fdtfile(); @@ -288,6 +319,8 @@ int misc_init_r(void) #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG set_board_info(); #endif + set_serial_number(); + return 0; } diff --git a/board/samsung/origen/tools/mkorigenspl.c b/board/samsung/origen/tools/mkorigenspl.c index 8b0c3ac..7b5d93b 100644 --- a/board/samsung/origen/tools/mkorigenspl.c +++ b/board/samsung/origen/tools/mkorigenspl.c @@ -83,8 +83,8 @@ int main(int argc, char **argv) for (i = 0; i < IMG_SIZE - SPL_HEADER_SIZE; i++) checksum += buffer[i+16]; - *(ulong *)buffer ^= 0x1f; - *(ulong *)(buffer+4) ^= checksum; + *(unsigned long *)buffer ^= 0x1f; + *(unsigned long *)(buffer+4) ^= checksum; for (i = 1; i < SPL_HEADER_SIZE; i++) buffer[i] ^= buffer[i-1]; diff --git a/board/st/stm32f429-discovery/stm32f429-discovery.c b/board/st/stm32f429-discovery/stm32f429-discovery.c index fb8475f..d16d73f 100644 --- a/board/st/stm32f429-discovery/stm32f429-discovery.c +++ b/board/st/stm32f429-discovery/stm32f429-discovery.c @@ -50,6 +50,7 @@ int uart_setup_gpio(void) int i; int rv = 0; + clock_setup(GPIO_A_CLOCK_CFG); for (i = 0; i < ARRAY_SIZE(usart_gpio); i++) { rv = stm32_gpio_config(&usart_gpio[i], &gpio_ctl_usart); if (rv) @@ -115,6 +116,13 @@ static int fmc_setup_gpio(void) int rv = 0; int i; + clock_setup(GPIO_B_CLOCK_CFG); + clock_setup(GPIO_C_CLOCK_CFG); + clock_setup(GPIO_D_CLOCK_CFG); + clock_setup(GPIO_E_CLOCK_CFG); + clock_setup(GPIO_F_CLOCK_CFG); + clock_setup(GPIO_G_CLOCK_CFG); + for (i = 0; i < ARRAY_SIZE(ext_ram_fmc_gpio); i++) { rv = stm32_gpio_config(&ext_ram_fmc_gpio[i], &gpio_ctl_fmc); diff --git a/board/st/stm32f746-disco/Kconfig b/board/st/stm32f746-disco/Kconfig new file mode 100644 index 0000000..09289d2 --- /dev/null +++ b/board/st/stm32f746-disco/Kconfig @@ -0,0 +1,19 @@ +if TARGET_STM32F746_DISCO + +config SYS_BOARD + string + default "stm32f746-disco" + +config SYS_VENDOR + string + default "st" + +config SYS_SOC + string + default "stm32f7" + +config SYS_CONFIG_NAME + string + default "stm32f746-disco" + +endif diff --git a/board/st/stm32f746-disco/MAINTAINERS b/board/st/stm32f746-disco/MAINTAINERS new file mode 100644 index 0000000..2df0a65 --- /dev/null +++ b/board/st/stm32f746-disco/MAINTAINERS @@ -0,0 +1,6 @@ +STM32F746 DISCOVERY BOARD +M: Vikas Manocha <vikas.manocha@st.com> +S: Maintained +F: board/st/stm32f746-disco +F: include/configs/stm32f746-disco.h +F: configs/stm32f746-disco_defconfig diff --git a/board/st/stm32f746-disco/Makefile b/board/st/stm32f746-disco/Makefile new file mode 100644 index 0000000..db8a0a4 --- /dev/null +++ b/board/st/stm32f746-disco/Makefile @@ -0,0 +1,8 @@ +# +# (C) Copyright 2016 +# Vikas Manocha <vikas.manocha@st.com> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := stm32f746-disco.o diff --git a/board/st/stm32f746-disco/stm32f746-disco.c b/board/st/stm32f746-disco/stm32f746-disco.c new file mode 100644 index 0000000..0e04d14 --- /dev/null +++ b/board/st/stm32f746-disco/stm32f746-disco.c @@ -0,0 +1,99 @@ +/* + * (C) Copyright 2016 + * Vikas Manocha, <vikas.manocha@st.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/armv7m.h> +#include <asm/arch/stm32.h> +#include <asm/arch/gpio.h> +#include <dm/platdata.h> +#include <dm/platform_data/serial_stm32x7.h> +#include <asm/arch/stm32_periph.h> +#include <asm/arch/stm32_defs.h> + +DECLARE_GLOBAL_DATA_PTR; + +const struct stm32_gpio_ctl gpio_ctl_gpout = { + .mode = STM32_GPIO_MODE_OUT, + .otype = STM32_GPIO_OTYPE_PP, + .speed = STM32_GPIO_SPEED_50M, + .pupd = STM32_GPIO_PUPD_NO, + .af = STM32_GPIO_AF0 +}; + +const struct stm32_gpio_ctl gpio_ctl_usart = { + .mode = STM32_GPIO_MODE_AF, + .otype = STM32_GPIO_OTYPE_PP, + .speed = STM32_GPIO_SPEED_50M, + .pupd = STM32_GPIO_PUPD_UP, + .af = STM32_GPIO_AF7 +}; + +static const struct stm32_gpio_dsc usart_gpio[] = { + {STM32_GPIO_PORT_A, STM32_GPIO_PIN_9}, /* TX */ + {STM32_GPIO_PORT_B, STM32_GPIO_PIN_7}, /* RX */ +}; + +int uart_setup_gpio(void) +{ + int i; + int rv = 0; + + clock_setup(GPIO_A_CLOCK_CFG); + clock_setup(GPIO_B_CLOCK_CFG); + for (i = 0; i < ARRAY_SIZE(usart_gpio); i++) { + rv = stm32_gpio_config(&usart_gpio[i], &gpio_ctl_usart); + if (rv) + goto out; + } + +out: + return rv; +} + +static const struct stm32x7_serial_platdata serial_platdata = { + .base = (struct stm32_usart *)USART1_BASE, + .clock = CONFIG_SYS_CLK_FREQ, +}; + +U_BOOT_DEVICE(stm32x7_serials) = { + .name = "serial_stm32x7", + .platdata = &serial_platdata, +}; + +u32 get_board_rev(void) +{ + return 0; +} + +int board_early_init_f(void) +{ + int res; + + res = uart_setup_gpio(); + clock_setup(USART1_CLOCK_CFG); + if (res) + return res; + + return 0; +} + +int board_init(void) +{ + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; + + return 0; +} + +int dram_init(void) +{ + gd->bd->bi_dram[0].start = CONFIG_SYS_RAM_BASE; + gd->bd->bi_dram[0].size = CONFIG_SYS_RAM_SIZE; + + gd->ram_size = CONFIG_SYS_RAM_SIZE; + return 0; +} diff --git a/cmd/bootm.c b/cmd/bootm.c index 48738ac..555ccbc 100644 --- a/cmd/bootm.c +++ b/cmd/bootm.c @@ -755,15 +755,15 @@ int do_booti(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #ifdef CONFIG_SYS_LONGHELP static char booti_help_text[] = "[addr [initrd[:size]] [fdt]]\n" - " - boot Linux Image stored in memory\n" + " - boot arm64 Linux Image stored in memory\n" "\tThe argument 'initrd' is optional and specifies the address\n" - "\tof the initrd in memory. The optional argument ':size' allows\n" - "\tspecifying the size of RAW initrd.\n" + "\tof an initrd in memory. The optional parameter ':size' allows\n" + "\tspecifying the size of a RAW initrd.\n" #if defined(CONFIG_OF_LIBFDT) - "\tSince booting a Linux kernelrequires a flat device-tree\n" - "\ta third argument is required which is the address of the\n" - "\tdevice-tree blob. To boot that kernel without an initrd image,\n" - "\tuse a '-' for the second argument.\n" + "\tSince booting a Linux kernel requires a flat device-tree, a\n" + "\tthird argument providing the address of the device-tree blob\n" + "\tis required. To boot a kernel with a device-tree blob but\n" + "\twithout an initrd image, use a '-' for the initrd argument.\n" #endif ""; #endif @@ -79,6 +79,26 @@ static int do_dfu(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (ctrlc()) goto exit; + if (dfu_get_defer_flush()) { + /* + * Call to usb_gadget_handle_interrupts() is necessary + * to act on ZLP OUT transaction from HOST PC after + * transmitting the whole file. + * + * If this ZLP OUT packet is NAK'ed, the HOST libusb + * function fails after timeout (by default it is set to + * 5 seconds). In such situation the dfu-util program + * exits with error message. + */ + usb_gadget_handle_interrupts(controller_index); + ret = dfu_flush(dfu_get_defer_flush(), NULL, 0, 0); + dfu_set_defer_flush(NULL); + if (ret) { + error("Deferred dfu_flush() failed!"); + goto exit; + } + } + WATCHDOG_RESET(); usb_gadget_handle_interrupts(controller_index); } @@ -1038,7 +1038,7 @@ static int do_mem_mtest(cmd_tbl_t *cmdtp, int flag, int argc, return -1; } - printf("Testing %08x ... %08x:\n", (uint)start, (uint)end); + printf("Testing %08lx ... %08lx:\n", start, end); debug("%s:%d: start %#08lx end %#08lx\n", __func__, __LINE__, start, end); diff --git a/configs/cm_t43_defconfig b/configs/cm_t43_defconfig index 6044ae9..d1da759 100644 --- a/configs/cm_t43_defconfig +++ b/configs/cm_t43_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_TARGET_CM_T43=y CONFIG_DM_GPIO=y CONFIG_SPL=y +CONFIG_SYS_PROMPT="CM-T43 # " # CONFIG_CMD_FLASH is not set CONFIG_CMD_SF=y CONFIG_CMD_USB=y @@ -10,3 +11,15 @@ CONFIG_CMD_GPIO=y # CONFIG_CMD_NFS is not set CONFIG_DM=y CONFIG_SYS_NS16550=y +CONFIG_DM_SERIAL=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y +CONFIG_SPI_FLASH_WINBOND=y +CONFIG_SPI_FLASH_SST=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_ISSI=y +CONFIG_SPI_FLASH_GIGADEVICE=y +CONFIG_SPI_FLASH_EON=y +CONFIG_SPI_FLASH_ATMEL=y diff --git a/configs/kwb_defconfig b/configs/kwb_defconfig index 10d39eb..4d2aa6c 100644 --- a/configs/kwb_defconfig +++ b/configs/kwb_defconfig @@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_TARGET_KWB=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1" -CONFIG_SYS_PROMPT="U-Boot (BuR V2.0)# " +CONFIG_HUSH_PARSER=y # CONFIG_CMD_BOOTD is not set # CONFIG_CMD_BOOTM is not set # CONFIG_CMD_GO is not set @@ -14,9 +14,18 @@ CONFIG_SYS_PROMPT="U-Boot (BuR V2.0)# " # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_I2C=y +CONFIG_CMD_USB=y # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_DHCP=y # CONFIG_CMD_NFS is not set +CONFIG_CMD_PING=y +CONFIG_CMD_TIME=y +CONFIG_NETCONSOLE=y CONFIG_SYS_NS16550=y +CONFIG_USB=y +CONFIG_USB_MUSB_HOST=y +CONFIG_USB_STORAGE=y diff --git a/configs/ls1021aqds_ddr4_nor_defconfig b/configs/ls1021aqds_ddr4_nor_defconfig index 2f16339..842f645 100644 --- a/configs/ls1021aqds_ddr4_nor_defconfig +++ b/configs/ls1021aqds_ddr4_nor_defconfig @@ -1,7 +1,11 @@ CONFIG_ARM=y CONFIG_TARGET_LS1021AQDS=y CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4" +CONFIG_DM_SERIAL=y +CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart" # CONFIG_CMD_SETEXPR is not set +CONFIG_OF_CONTROL=y +CONFIG_DM=y CONFIG_NETDEVICES=y CONFIG_E1000=y CONFIG_SYS_NS16550=y diff --git a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig index 44b2a0d..0e1a59d 100644 --- a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig +++ b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig @@ -1,7 +1,11 @@ CONFIG_ARM=y CONFIG_TARGET_LS1021AQDS=y CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,LPUART" +CONFIG_DM_SERIAL=y +CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-lpuart" # CONFIG_CMD_SETEXPR is not set +CONFIG_OF_CONTROL=y +CONFIG_DM=y CONFIG_NETDEVICES=y CONFIG_E1000=y CONFIG_FSL_LPUART=y diff --git a/configs/ls1021aqds_nor_defconfig b/configs/ls1021aqds_nor_defconfig index 6878df4..f4c81e2 100644 --- a/configs/ls1021aqds_nor_defconfig +++ b/configs/ls1021aqds_nor_defconfig @@ -1,6 +1,10 @@ CONFIG_ARM=y CONFIG_TARGET_LS1021AQDS=y +CONFIG_DM_SERIAL=y +CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart" # CONFIG_CMD_SETEXPR is not set +CONFIG_OF_CONTROL=y +CONFIG_DM=y CONFIG_NETDEVICES=y CONFIG_E1000=y CONFIG_SYS_NS16550=y diff --git a/configs/ls1021aqds_nor_lpuart_defconfig b/configs/ls1021aqds_nor_lpuart_defconfig index 1186af2..e81448d 100644 --- a/configs/ls1021aqds_nor_lpuart_defconfig +++ b/configs/ls1021aqds_nor_lpuart_defconfig @@ -1,7 +1,11 @@ CONFIG_ARM=y CONFIG_TARGET_LS1021AQDS=y +CONFIG_DM_SERIAL=y +CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-lpuart" CONFIG_SYS_EXTRA_OPTIONS="LPUART" # CONFIG_CMD_SETEXPR is not set +CONFIG_OF_CONTROL=y +CONFIG_DM=y CONFIG_NETDEVICES=y CONFIG_E1000=y CONFIG_FSL_LPUART=y diff --git a/configs/ls1021aqds_qspi_defconfig b/configs/ls1021aqds_qspi_defconfig index 0f740fd..2e98d6c 100644 --- a/configs/ls1021aqds_qspi_defconfig +++ b/configs/ls1021aqds_qspi_defconfig @@ -1,7 +1,7 @@ CONFIG_ARM=y CONFIG_TARGET_LS1021AQDS=y CONFIG_DM_SPI=y -CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds" +CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart" CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_SETEXPR is not set diff --git a/configs/ls1021aqds_sdcard_defconfig b/configs/ls1021aqds_sdcard_ifc_defconfig index 3249b48..e283f69 100644 --- a/configs/ls1021aqds_sdcard_defconfig +++ b/configs/ls1021aqds_sdcard_ifc_defconfig @@ -1,8 +1,11 @@ CONFIG_ARM=y CONFIG_TARGET_LS1021AQDS=y +CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT" # CONFIG_CMD_SETEXPR is not set +CONFIG_OF_CONTROL=y +CONFIG_DM=y CONFIG_NETDEVICES=y CONFIG_E1000=y CONFIG_SYS_NS16550=y diff --git a/configs/ls1021aqds_sdcard_qspi_defconfig b/configs/ls1021aqds_sdcard_qspi_defconfig new file mode 100644 index 0000000..cd75af6 --- /dev/null +++ b/configs/ls1021aqds_sdcard_qspi_defconfig @@ -0,0 +1,16 @@ +CONFIG_ARM=y +CONFIG_TARGET_LS1021AQDS=y +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT,SD_BOOT_QSPI" +CONFIG_DM_SPI=y +CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart" +# CONFIG_CMD_SETEXPR is not set +CONFIG_OF_CONTROL=y +CONFIG_DM=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_NETDEVICES=y +CONFIG_E1000=y +CONFIG_SYS_NS16550=y +CONFIG_FSL_DSPI=y +CONFIG_FSL_QSPI=y diff --git a/configs/stm32f746-disco_defconfig b/configs/stm32f746-disco_defconfig new file mode 100644 index 0000000..7cfed4a --- /dev/null +++ b/configs/stm32f746-disco_defconfig @@ -0,0 +1,9 @@ +CONFIG_ARM=y +CONFIG_STM32=y +CONFIG_STM32F7=y +CONFIG_TARGET_STM32F746_DISCO=y +CONFIG_SYS_PROMPT="U-Boot > " +CONFIG_AUTOBOOT_KEYED=y +CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n" +CONFIG_AUTOBOOT_STOP_STR=" " +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/tseries_mmc_defconfig b/configs/tseries_mmc_defconfig index 7518774..168e379 100644 --- a/configs/tseries_mmc_defconfig +++ b/configs/tseries_mmc_defconfig @@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_TARGET_TSERIES=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,EMMC_BOOT" -CONFIG_SYS_PROMPT="U-Boot (BuR V2.0)# " +CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_XIMG is not set @@ -11,9 +11,18 @@ CONFIG_SYS_PROMPT="U-Boot (BuR V2.0)# " # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_I2C=y +CONFIG_CMD_USB=y # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_DHCP=y # CONFIG_CMD_NFS is not set +CONFIG_CMD_PING=y +CONFIG_CMD_TIME=y +CONFIG_NETCONSOLE=y CONFIG_SYS_NS16550=y +CONFIG_USB=y +CONFIG_USB_MUSB_HOST=y +CONFIG_USB_STORAGE=y diff --git a/configs/tseries_nand_defconfig b/configs/tseries_nand_defconfig index 65d514a..8151caf 100644 --- a/configs/tseries_nand_defconfig +++ b/configs/tseries_nand_defconfig @@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_TARGET_TSERIES=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND" -CONFIG_SYS_PROMPT="U-Boot (BuR V2.0)# " +CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_XIMG is not set @@ -11,9 +11,19 @@ CONFIG_SYS_PROMPT="U-Boot (BuR V2.0)# " # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_NAND=y +CONFIG_CMD_I2C=y +CONFIG_CMD_USB=y # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_DHCP=y # CONFIG_CMD_NFS is not set +CONFIG_CMD_PING=y +CONFIG_CMD_TIME=y +CONFIG_NETCONSOLE=y CONFIG_SYS_NS16550=y +CONFIG_USB=y +CONFIG_USB_MUSB_HOST=y +CONFIG_USB_STORAGE=y diff --git a/configs/tseries_spi_defconfig b/configs/tseries_spi_defconfig index 11e4e6b..901c55e 100644 --- a/configs/tseries_spi_defconfig +++ b/configs/tseries_spi_defconfig @@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_TARGET_TSERIES=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,SPI_BOOT,EMMC_BOOT" -CONFIG_SYS_PROMPT="U-Boot (BuR V2.0)# " +CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_XIMG is not set @@ -11,11 +11,23 @@ CONFIG_SYS_PROMPT="U-Boot (BuR V2.0)# " # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_SF=y +CONFIG_CMD_SPI=y +CONFIG_CMD_I2C=y +CONFIG_CMD_USB=y # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_DHCP=y # CONFIG_CMD_NFS is not set +CONFIG_CMD_PING=y +CONFIG_CMD_TIME=y +CONFIG_NETCONSOLE=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set CONFIG_SYS_NS16550=y +CONFIG_USB=y +CONFIG_USB_MUSB_HOST=y +CONFIG_USB_STORAGE=y diff --git a/doc/driver-model/serial-howto.txt b/doc/driver-model/serial-howto.txt index 61f2da3..cddfb9f 100644 --- a/doc/driver-model/serial-howto.txt +++ b/doc/driver-model/serial-howto.txt @@ -4,7 +4,6 @@ How to port a serial driver to driver model Almost all of the serial drivers have been converted as at January 2016. These ones remain: - arm_dcc.c mcfuart.c serial_bfin.c serial_pxa.c diff --git a/drivers/crypto/fsl/jr.c b/drivers/crypto/fsl/jr.c index b553e3c..b766470 100644 --- a/drivers/crypto/fsl/jr.c +++ b/drivers/crypto/fsl/jr.c @@ -12,6 +12,9 @@ #include "jr.h" #include "jobdesc.h" #include "desc_constr.h" +#ifdef CONFIG_FSL_CORENET +#include <asm/fsl_pamu.h> +#endif #define CIRC_CNT(head, tail, size) (((head) - (tail)) & (size - 1)) #define CIRC_SPACE(head, tail, size) CIRC_CNT((tail), (head) + 1, (size)) @@ -95,14 +98,16 @@ static int jr_init(void) JR_SIZE * sizeof(dma_addr_t)); if (!jr.input_ring) return -1; + + jr.op_size = roundup(JR_SIZE * sizeof(struct op_ring), + ARCH_DMA_MINALIGN); jr.output_ring = - (struct op_ring *)memalign(ARCH_DMA_MINALIGN, - JR_SIZE * sizeof(struct op_ring)); + (struct op_ring *)memalign(ARCH_DMA_MINALIGN, jr.op_size); if (!jr.output_ring) return -1; memset(jr.input_ring, 0, JR_SIZE * sizeof(dma_addr_t)); - memset(jr.output_ring, 0, JR_SIZE * sizeof(struct op_ring)); + memset(jr.output_ring, 0, jr.op_size); start_jr0(); @@ -190,8 +195,8 @@ static int jr_enqueue(uint32_t *desc_addr, unsigned long start = (unsigned long)&jr.info[head] & ~(ARCH_DMA_MINALIGN - 1); - unsigned long end = ALIGN(start + sizeof(struct jr_info), - ARCH_DMA_MINALIGN); + unsigned long end = ALIGN((unsigned long)&jr.info[head] + + sizeof(struct jr_info), ARCH_DMA_MINALIGN); flush_dcache_range(start, end); #ifdef CONFIG_PHYS_64BIT @@ -216,11 +221,19 @@ static int jr_enqueue(uint32_t *desc_addr, #endif /* ifdef CONFIG_PHYS_64BIT */ start = (unsigned long)&jr.input_ring[head] & ~(ARCH_DMA_MINALIGN - 1); - end = ALIGN(start + sizeof(phys_addr_t), ARCH_DMA_MINALIGN); + end = ALIGN((unsigned long)&jr.input_ring[head] + + sizeof(dma_addr_t), ARCH_DMA_MINALIGN); flush_dcache_range(start, end); jr.head = (head + 1) & (jr.size - 1); + /* Invalidate output ring */ + start = (unsigned long)jr.output_ring & + ~(ARCH_DMA_MINALIGN - 1); + end = ALIGN((unsigned long)jr.output_ring + jr.op_size, + ARCH_DMA_MINALIGN); + invalidate_dcache_range(start, end); + sec_out32(®s->irja, 1); return 0; @@ -241,12 +254,6 @@ static int jr_dequeue(void) #endif while (sec_in32(®s->orsf) && CIRC_CNT(jr.head, jr.tail, jr.size)) { - unsigned long start = (unsigned long)jr.output_ring & - ~(ARCH_DMA_MINALIGN - 1); - unsigned long end = ALIGN(start + - sizeof(struct op_ring)*JR_SIZE, - ARCH_DMA_MINALIGN); - invalidate_dcache_range(start, end); found = 0; @@ -530,18 +537,38 @@ int sec_init(void) uint32_t mcr = sec_in32(&sec->mcfgr); int ret = 0; +#ifdef CONFIG_FSL_CORENET + uint32_t liodnr; + uint32_t liodn_ns; + uint32_t liodn_s; +#endif + mcr = (mcr & ~MCFGR_AWCACHE_MASK) | (0x2 << MCFGR_AWCACHE_SHIFT); #ifdef CONFIG_PHYS_64BIT mcr |= (1 << MCFGR_PS_SHIFT); #endif sec_out32(&sec->mcfgr, mcr); +#ifdef CONFIG_FSL_CORENET + liodnr = sec_in32(&sec->jrliodnr[0].ls); + liodn_ns = (liodnr & JRNSLIODN_MASK) >> JRNSLIODN_SHIFT; + liodn_s = (liodnr & JRSLIODN_MASK) >> JRSLIODN_SHIFT; +#endif + ret = jr_init(); if (ret < 0) { printf("SEC initialization failed\n"); return -1; } +#ifdef CONFIG_FSL_CORENET + ret = sec_config_pamu_table(liodn_ns, liodn_s); + if (ret < 0) + return -1; + + pamu_enable(); +#endif + if (get_rng_vid() >= 4) { if (rng_init() < 0) { printf("RNG instantiation failed\n"); diff --git a/drivers/crypto/fsl/jr.h b/drivers/crypto/fsl/jr.h index 5899696..545d964 100644 --- a/drivers/crypto/fsl/jr.h +++ b/drivers/crypto/fsl/jr.h @@ -72,6 +72,8 @@ struct jobring { int write_idx; /* Size of the rings. */ int size; + /* Op ring size aligned to cache line size */ + int op_size; /* The ip and output rings have to be accessed by SEC. So the * pointers will ahve to point to the housekeeping region provided * by SEC diff --git a/drivers/gpio/stm32_gpio.c b/drivers/gpio/stm32_gpio.c index 75a84e1..50f86d3 100644 --- a/drivers/gpio/stm32_gpio.c +++ b/drivers/gpio/stm32_gpio.c @@ -19,17 +19,7 @@ DECLARE_GLOBAL_DATA_PTR; -#if defined(CONFIG_STM32F4) -#define STM32_GPIOA_BASE (STM32_AHB1PERIPH_BASE + 0x0000) -#define STM32_GPIOB_BASE (STM32_AHB1PERIPH_BASE + 0x0400) -#define STM32_GPIOC_BASE (STM32_AHB1PERIPH_BASE + 0x0800) -#define STM32_GPIOD_BASE (STM32_AHB1PERIPH_BASE + 0x0C00) -#define STM32_GPIOE_BASE (STM32_AHB1PERIPH_BASE + 0x1000) -#define STM32_GPIOF_BASE (STM32_AHB1PERIPH_BASE + 0x1400) -#define STM32_GPIOG_BASE (STM32_AHB1PERIPH_BASE + 0x1800) -#define STM32_GPIOH_BASE (STM32_AHB1PERIPH_BASE + 0x1C00) -#define STM32_GPIOI_BASE (STM32_AHB1PERIPH_BASE + 0x2000) - +#if defined(CONFIG_STM32F4) || defined(CONFIG_STM32F7) static const unsigned long io_base[] = { STM32_GPIOA_BASE, STM32_GPIOB_BASE, STM32_GPIOC_BASE, STM32_GPIOD_BASE, STM32_GPIOE_BASE, STM32_GPIOF_BASE, @@ -70,8 +60,6 @@ int stm32_gpio_config(const struct stm32_gpio_dsc *dsc, gpio_regs = (struct stm32_gpio_regs *)io_base[dsc->port]; - setbits_le32(&STM32_RCC->ahb1enr, 1 << dsc->port); - i = (dsc->pin & 0x07) * 4; clrsetbits_le32(&gpio_regs->afr[dsc->pin >> 3], 0xF << i, ctl->af << i); @@ -87,14 +75,6 @@ out: return rv; } #elif defined(CONFIG_STM32F1) -#define STM32_GPIOA_BASE (STM32_APB2PERIPH_BASE + 0x0800) -#define STM32_GPIOB_BASE (STM32_APB2PERIPH_BASE + 0x0C00) -#define STM32_GPIOC_BASE (STM32_APB2PERIPH_BASE + 0x1000) -#define STM32_GPIOD_BASE (STM32_APB2PERIPH_BASE + 0x1400) -#define STM32_GPIOE_BASE (STM32_APB2PERIPH_BASE + 0x1800) -#define STM32_GPIOF_BASE (STM32_APB2PERIPH_BASE + 0x1C00) -#define STM32_GPIOG_BASE (STM32_APB2PERIPH_BASE + 0x2000) - static const unsigned long io_base[] = { STM32_GPIOA_BASE, STM32_GPIOB_BASE, STM32_GPIOC_BASE, STM32_GPIOD_BASE, STM32_GPIOE_BASE, STM32_GPIOF_BASE, @@ -141,9 +121,6 @@ int stm32_gpio_config(const struct stm32_gpio_dsc *dsc, gpio_regs = (struct stm32_gpio_regs *)io_base[dsc->port]; - /* Enable clock for GPIO port */ - setbits_le32(&STM32_RCC->apb2enr, 0x04 << dsc->port); - if (p < 8) { cr = &gpio_regs->crl; crp = p; @@ -230,7 +207,7 @@ int gpio_direction_input(unsigned gpio) dsc.port = stm32_gpio_to_port(gpio); dsc.pin = stm32_gpio_to_pin(gpio); -#if defined(CONFIG_STM32F4) +#if defined(CONFIG_STM32F4) || defined(CONFIG_STM32F7) ctl.af = STM32_GPIO_AF0; ctl.mode = STM32_GPIO_MODE_IN; ctl.otype = STM32_GPIO_OTYPE_PP; @@ -256,7 +233,7 @@ int gpio_direction_output(unsigned gpio, int value) dsc.port = stm32_gpio_to_port(gpio); dsc.pin = stm32_gpio_to_pin(gpio); -#if defined(CONFIG_STM32F4) +#if defined(CONFIG_STM32F4) || defined(CONFIG_STM32F7) ctl.af = STM32_GPIO_AF0; ctl.mode = STM32_GPIO_MODE_OUT; ctl.pupd = STM32_GPIO_PUPD_NO; diff --git a/drivers/net/fm/Makefile b/drivers/net/fm/Makefile index a3c9f99..493cdc6 100644 --- a/drivers/net/fm/Makefile +++ b/drivers/net/fm/Makefile @@ -6,6 +6,7 @@ obj-y += dtsec.o obj-y += eth.o +obj-y += fdt.o obj-y += fm.o obj-y += init.o obj-y += tgec.o diff --git a/drivers/net/fm/fdt.c b/drivers/net/fm/fdt.c new file mode 100644 index 0000000..9918d80 --- /dev/null +++ b/drivers/net/fm/fdt.c @@ -0,0 +1,129 @@ +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include <asm/io.h> +#include <fsl_qe.h> /* For struct qe_firmware */ + +#ifdef CONFIG_SYS_DPAA_FMAN +/** + * fdt_fixup_fman_firmware -- insert the Fman firmware into the device tree + * + * The binding for an Fman firmware node is documented in + * Documentation/powerpc/dts-bindings/fsl/dpaa/fman.txt. This node contains + * the actual Fman firmware binary data. The operating system is expected to + * be able to parse the binary data to determine any attributes it needs. + */ +void fdt_fixup_fman_firmware(void *blob) +{ + int rc, fmnode, fwnode = -1; + uint32_t phandle; + struct qe_firmware *fmanfw; + const struct qe_header *hdr; + unsigned int length; + uint32_t crc; + const char *p; + + /* The first Fman we find will contain the actual firmware. */ + fmnode = fdt_node_offset_by_compatible(blob, -1, "fsl,fman"); + if (fmnode < 0) + /* Exit silently if there are no Fman devices */ + return; + + /* If we already have a firmware node, then also exit silently. */ + if (fdt_node_offset_by_compatible(blob, -1, "fsl,fman-firmware") > 0) + return; + + /* If the environment variable is not set, then exit silently */ + p = getenv("fman_ucode"); + if (!p) + return; + + fmanfw = (struct qe_firmware *)simple_strtoul(p, NULL, 16); + if (!fmanfw) + return; + + hdr = &fmanfw->header; + length = fdt32_to_cpu(hdr->length); + + /* Verify the firmware. */ + if ((hdr->magic[0] != 'Q') || (hdr->magic[1] != 'E') || + (hdr->magic[2] != 'F')) { + printf("Data at %p is not an Fman firmware\n", fmanfw); + return; + } + + if (length > CONFIG_SYS_QE_FMAN_FW_LENGTH) { + printf("Fman firmware at %p is too large (size=%u)\n", + fmanfw, length); + return; + } + + length -= sizeof(u32); /* Subtract the size of the CRC */ + crc = fdt32_to_cpu(*(u32 *)((void *)fmanfw + length)); + if (crc != crc32_no_comp(0, (void *)fmanfw, length)) { + printf("Fman firmware at %p has invalid CRC\n", fmanfw); + return; + } + + length += sizeof(u32); + + /* Increase the size of the fdt to make room for the node. */ + rc = fdt_increase_size(blob, length); + if (rc < 0) { + printf("Unable to make room for Fman firmware: %s\n", + fdt_strerror(rc)); + return; + } + + /* Create the firmware node. */ + fwnode = fdt_add_subnode(blob, fmnode, "fman-firmware"); + if (fwnode < 0) { + char s[64]; + fdt_get_path(blob, fmnode, s, sizeof(s)); + printf("Could not add firmware node to %s: %s\n", s, + fdt_strerror(fwnode)); + return; + } + rc = fdt_setprop_string(blob, fwnode, "compatible", + "fsl,fman-firmware"); + if (rc < 0) { + char s[64]; + fdt_get_path(blob, fwnode, s, sizeof(s)); + printf("Could not add compatible property to node %s: %s\n", s, + fdt_strerror(rc)); + return; + } + phandle = fdt_create_phandle(blob, fwnode); + if (!phandle) { + char s[64]; + fdt_get_path(blob, fwnode, s, sizeof(s)); + printf("Could not add phandle property to node %s: %s\n", s, + fdt_strerror(rc)); + return; + } + rc = fdt_setprop(blob, fwnode, "fsl,firmware", fmanfw, length); + if (rc < 0) { + char s[64]; + fdt_get_path(blob, fwnode, s, sizeof(s)); + printf("Could not add firmware property to node %s: %s\n", s, + fdt_strerror(rc)); + return; + } + + /* Find all other Fman nodes and point them to the firmware node. */ + while ((fmnode = fdt_node_offset_by_compatible(blob, fmnode, + "fsl,fman")) > 0) { + rc = fdt_setprop_cell(blob, fmnode, "fsl,firmware-phandle", + phandle); + if (rc < 0) { + char s[64]; + fdt_get_path(blob, fmnode, s, sizeof(s)); + printf("Could not add pointer property to node %s: %s\n", + s, fdt_strerror(rc)); + return; + } + } +} +#endif diff --git a/drivers/net/fm/fm.c b/drivers/net/fm/fm.c index 40fbf19..e2a8ed3 100644 --- a/drivers/net/fm/fm.c +++ b/drivers/net/fm/fm.c @@ -10,7 +10,7 @@ #include <asm/errno.h> #include "fm.h" -#include "../../qe/qe.h" /* For struct qe_firmware */ +#include <fsl_qe.h> /* For struct qe_firmware */ #ifdef CONFIG_SYS_QE_FMAN_FW_IN_NAND #include <nand.h> diff --git a/drivers/pci/pci_rom.c b/drivers/pci/pci_rom.c index d5bf6f4..9eb605b 100644 --- a/drivers/pci/pci_rom.c +++ b/drivers/pci/pci_rom.c @@ -266,7 +266,7 @@ int dm_pci_run_vga_bios(struct udevice *dev, int (*int15_handler)(void), int exec_method) { struct pci_child_platdata *pplat = dev_get_parent_platdata(dev); - struct pci_rom_header *rom, *ram = NULL; + struct pci_rom_header *rom = NULL, *ram = NULL; int vesa_mode = -1; bool emulate, alloced; int ret; diff --git a/drivers/power/pmic/pmic_tps65218.c b/drivers/power/pmic/pmic_tps65218.c index dbc7a73..0fd0ad4 100644 --- a/drivers/power/pmic/pmic_tps65218.c +++ b/drivers/power/pmic/pmic_tps65218.c @@ -11,6 +11,20 @@ #include <power/pmic.h> #include <power/tps65218.h> +int tps65218_reg_read(uchar dest_reg, uchar *dest_val) +{ + uchar read_val; + int ret; + + ret = i2c_read(TPS65218_CHIP_PM, dest_reg, 1, &read_val, 1); + if (ret) + return ret; + + *dest_val = read_val; + + return 0; +} + /** * tps65218_reg_write() - Generic function that can write a TPS65218 PMIC * register or bit field regardless of protection @@ -98,6 +112,48 @@ int tps65218_voltage_update(uchar dc_cntrl_reg, uchar volt_sel) return 0; } +/** + * tps65218_toggle_fseal() - Perform the sequence that toggles the FSEAL bit. + * + * @return: 0 on success, -EBADE if the sequence was broken + */ +int tps65218_toggle_fseal(void) +{ + if (tps65218_reg_write(TPS65218_PROT_LEVEL_NONE, TPS65218_PASSWORD, + 0xb1, TPS65218_MASK_ALL_BITS)) + return -EBADE; + + if (tps65218_reg_write(TPS65218_PROT_LEVEL_NONE, TPS65218_PASSWORD, + 0xfe, TPS65218_MASK_ALL_BITS)) + return -EBADE; + + if (tps65218_reg_write(TPS65218_PROT_LEVEL_NONE, TPS65218_PASSWORD, + 0xa3, TPS65218_MASK_ALL_BITS)) + return -EBADE; + + return 0; +} + +/** + * tps65218_lock_fseal() - Perform the sequence that locks the FSEAL bit to 1. + * + * The FSEAL bit prevents the PMIC from turning off DCDC5 and DCDC6. It can be + * toggled at most 3 times: 0->1, 1->0, and finally 0->1. After the third switch + * its value is locked and can only be reset by powering off the PMIC entirely. + * + * @return: 0 on success, -EBADE if the sequence was broken + */ +int tps65218_lock_fseal(void) +{ + int i; + + for (i = 0; i < 3; i++) + if (tps65218_toggle_fseal()) + return -EBADE; + + return 0; +} + int power_tps65218_init(unsigned char bus) { static const char name[] = "TPS65218_PMIC"; diff --git a/drivers/qe/fdt.c b/drivers/qe/fdt.c index dfae4bf..4f48f98 100644 --- a/drivers/qe/fdt.c +++ b/drivers/qe/fdt.c @@ -10,7 +10,7 @@ #include <common.h> #include <libfdt.h> #include <fdt_support.h> -#include "qe.h" +#include <fsl_qe.h> #ifdef CONFIG_QE DECLARE_GLOBAL_DATA_PTR; diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c index 08620b2..2b98984 100644 --- a/drivers/qe/qe.c +++ b/drivers/qe/qe.c @@ -12,7 +12,7 @@ #include "asm/errno.h" #include "asm/io.h" #include "linux/immap_qe.h" -#include "qe.h" +#include <fsl_qe.h> #ifdef CONFIG_LS102XA #include <asm/arch/immap_ls102xa.h> #endif @@ -20,7 +20,9 @@ #define MPC85xx_DEVDISR_QE_DISABLE 0x1 qe_map_t *qe_immr = NULL; +#ifdef CONFIG_QE static qe_snum_t snums[QE_NUM_OF_SNUM]; +#endif DECLARE_GLOBAL_DATA_PTR; @@ -81,6 +83,7 @@ void *qe_muram_addr(uint offset) return (void *)&qe_immr->muram[offset]; } +#ifdef CONFIG_QE static void qe_sdma_init(void) { volatile sdma_t *p; @@ -184,12 +187,12 @@ void qe_init(uint qe_base) qe_sdma_init(); qe_snums_init(); } +#endif #ifdef CONFIG_U_QE void u_qe_init(void) { - uint qe_base = CONFIG_SYS_IMMR + 0x01400000; /* QE immr base */ - qe_immr = (qe_map_t *)qe_base; + qe_immr = (qe_map_t *)(CONFIG_SYS_IMMR + QE_IMMR_OFFSET); u_qe_upload_firmware((const void *)CONFIG_SYS_QE_FW_ADDR); out_be32(&qe_immr->iram.iready, QE_IRAM_READY); @@ -200,9 +203,8 @@ void u_qe_init(void) void u_qe_resume(void) { qe_map_t *qe_immrr; - uint qe_base = CONFIG_SYS_IMMR + QE_IMMR_OFFSET; /* QE immr base */ - qe_immrr = (qe_map_t *)qe_base; + qe_immrr = (qe_map_t *)(CONFIG_SYS_IMMR + QE_IMMR_OFFSET); u_qe_firmware_resume((const void *)CONFIG_SYS_QE_FW_ADDR, qe_immrr); out_be32(&qe_immrr->iram.iready, QE_IRAM_READY); } @@ -214,6 +216,7 @@ void qe_reset(void) (u8) QE_CR_PROTOCOL_UNSPECIFIED, 0); } +#ifdef CONFIG_QE void qe_assign_page(uint snum, uint para_ram_base) { u32 cecr; @@ -229,6 +232,7 @@ void qe_assign_page(uint snum, uint para_ram_base) return; } +#endif /* * brg: 0~15 as BRG1~BRG16 diff --git a/drivers/qe/uccf.c b/drivers/qe/uccf.c index 85386bf..e011886 100644 --- a/drivers/qe/uccf.c +++ b/drivers/qe/uccf.c @@ -12,8 +12,8 @@ #include "asm/errno.h" #include "asm/io.h" #include "linux/immap_qe.h" -#include "qe.h" #include "uccf.h" +#include <fsl_qe.h> void ucc_fast_transmit_on_demand(ucc_fast_private_t *uccf) { diff --git a/drivers/qe/uccf.h b/drivers/qe/uccf.h index 55941e4..aa817e7 100644 --- a/drivers/qe/uccf.h +++ b/drivers/qe/uccf.h @@ -11,8 +11,8 @@ #define __UCCF_H__ #include "common.h" -#include "qe.h" #include "linux/immap_qe.h" +#include <fsl_qe.h> /* Fast or Giga ethernet */ diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c index e0ab04a..40cccc2 100644 --- a/drivers/qe/uec.c +++ b/drivers/qe/uec.c @@ -12,11 +12,11 @@ #include "asm/errno.h" #include "asm/io.h" #include "linux/immap_qe.h" -#include "qe.h" #include "uccf.h" #include "uec.h" #include "uec_phy.h" #include "miiphy.h" +#include <fsl_qe.h> #include <phy.h> /* Default UTBIPAR SMI address */ diff --git a/drivers/qe/uec.h b/drivers/qe/uec.h index 6b559f7..22e248f 100644 --- a/drivers/qe/uec.h +++ b/drivers/qe/uec.h @@ -10,8 +10,8 @@ #ifndef __UEC_H__ #define __UEC_H__ -#include "qe.h" #include "uccf.h" +#include <fsl_qe.h> #include <phy.h> #define MAX_TX_THREADS 8 diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c index e701787..272874d 100644 --- a/drivers/qe/uec_phy.c +++ b/drivers/qe/uec_phy.c @@ -16,11 +16,11 @@ #include "asm/errno.h" #include "linux/immap_qe.h" #include "asm/io.h" -#include "qe.h" #include "uccf.h" #include "uec.h" #include "uec_phy.h" #include "miiphy.h" +#include <fsl_qe.h> #include <phy.h> #define ugphy_printk(format, arg...) \ diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index c63999a..05bdf56 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -37,6 +37,7 @@ obj-$(CONFIG_ARC_SERIAL) += serial_arc.o obj-$(CONFIG_UNIPHIER_SERIAL) += serial_uniphier.o obj-$(CONFIG_STM32_SERIAL) += serial_stm32.o obj-$(CONFIG_PIC32_SERIAL) += serial_pic32.o +obj-$(CONFIG_STM32X7_SERIAL) += serial_stm32x7.o ifndef CONFIG_SPL_BUILD obj-$(CONFIG_USB_TTY) += usbtty.o diff --git a/drivers/serial/serial_stm32x7.c b/drivers/serial/serial_stm32x7.c new file mode 100644 index 0000000..cfbfab7 --- /dev/null +++ b/drivers/serial/serial_stm32x7.c @@ -0,0 +1,83 @@ +/* + * (C) Copyright 2016 + * Vikas Manocha, <vikas.manocha@st.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <asm/io.h> +#include <serial.h> +#include <dm/platform_data/serial_stm32x7.h> +#include "serial_stm32x7.h" + +DECLARE_GLOBAL_DATA_PTR; + +static int stm32_serial_setbrg(struct udevice *dev, int baudrate) +{ + struct stm32x7_serial_platdata *plat = dev->platdata; + struct stm32_usart *const usart = plat->base; + writel(plat->clock/baudrate, &usart->brr); + + return 0; +} + +static int stm32_serial_getc(struct udevice *dev) +{ + struct stm32x7_serial_platdata *plat = dev->platdata; + struct stm32_usart *const usart = plat->base; + + if ((readl(&usart->sr) & USART_SR_FLAG_RXNE) == 0) + return -EAGAIN; + + return readl(&usart->rd_dr); +} + +static int stm32_serial_putc(struct udevice *dev, const char c) +{ + struct stm32x7_serial_platdata *plat = dev->platdata; + struct stm32_usart *const usart = plat->base; + + if ((readl(&usart->sr) & USART_SR_FLAG_TXE) == 0) + return -EAGAIN; + + writel(c, &usart->tx_dr); + + return 0; +} + +static int stm32_serial_pending(struct udevice *dev, bool input) +{ + struct stm32x7_serial_platdata *plat = dev->platdata; + struct stm32_usart *const usart = plat->base; + + if (input) + return readl(&usart->sr) & USART_SR_FLAG_RXNE ? 1 : 0; + else + return readl(&usart->sr) & USART_SR_FLAG_TXE ? 0 : 1; +} + +static int stm32_serial_probe(struct udevice *dev) +{ + struct stm32x7_serial_platdata *plat = dev->platdata; + struct stm32_usart *const usart = plat->base; + setbits_le32(&usart->cr1, USART_CR1_RE | USART_CR1_TE | USART_CR1_UE); + + return 0; +} + +static const struct dm_serial_ops stm32_serial_ops = { + .putc = stm32_serial_putc, + .pending = stm32_serial_pending, + .getc = stm32_serial_getc, + .setbrg = stm32_serial_setbrg, +}; + +U_BOOT_DRIVER(serial_stm32) = { + .name = "serial_stm32x7", + .id = UCLASS_SERIAL, + .ops = &stm32_serial_ops, + .probe = stm32_serial_probe, + .flags = DM_FLAG_PRE_RELOC, +}; diff --git a/drivers/serial/serial_stm32x7.h b/drivers/serial/serial_stm32x7.h new file mode 100644 index 0000000..6190d67 --- /dev/null +++ b/drivers/serial/serial_stm32x7.h @@ -0,0 +1,37 @@ +/* + * (C) Copyright 2016 + * Vikas Manocha, <vikas.manocha@st.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _SERIAL_STM32_X7_ +#define _SERIAL_STM32_X7_ + +struct stm32_usart { + u32 cr1; + u32 cr2; + u32 cr3; + u32 brr; + u32 gtpr; + u32 rtor; + u32 rqr; + u32 sr; + u32 icr; + u32 rd_dr; + u32 tx_dr; +}; + + +#define USART_CR1_RE (1 << 2) +#define USART_CR1_TE (1 << 3) +#define USART_CR1_UE (1 << 0) + +#define USART_SR_FLAG_RXNE (1 << 5) +#define USART_SR_FLAG_TXE (1 << 7) + +#define USART_BRR_F_MASK 0xFF +#define USART_BRR_M_SHIFT 4 +#define USART_BRR_M_MASK 0xFFF0 + +#endif diff --git a/drivers/usb/eth/usb_ether.c b/drivers/usb/eth/usb_ether.c index b9c9a84..36734e2 100644 --- a/drivers/usb/eth/usb_ether.c +++ b/drivers/usb/eth/usb_ether.c @@ -73,7 +73,7 @@ int usb_ether_register(struct udevice *dev, struct ueth_data *ueth, int rxsize) } ueth->rxsize = rxsize; - ueth->rxbuf = memalign(rxsize, ARCH_DMA_MINALIGN); + ueth->rxbuf = memalign(ARCH_DMA_MINALIGN, rxsize); if (!ueth->rxbuf) return -ENOMEM; diff --git a/drivers/usb/gadget/f_dfu.c b/drivers/usb/gadget/f_dfu.c index 77a1567..7d88008 100644 --- a/drivers/usb/gadget/f_dfu.c +++ b/drivers/usb/gadget/f_dfu.c @@ -44,6 +44,8 @@ struct f_dfu { unsigned int poll_timeout; }; +struct dfu_entity *dfu_defer_flush; + typedef int (*dfu_state_fn) (struct f_dfu *, const struct usb_ctrlrequest *, struct usb_gadget *, @@ -167,14 +169,7 @@ static void dnload_request_complete(struct usb_ep *ep, struct usb_request *req) static void dnload_request_flush(struct usb_ep *ep, struct usb_request *req) { struct f_dfu *f_dfu = req->context; - int ret; - - ret = dfu_flush(dfu_get_entity(f_dfu->altsetting), req->buf, - req->length, f_dfu->blk_seq_num); - if (ret) { - f_dfu->dfu_status = DFU_STATUS_errUNKNOWN; - f_dfu->dfu_state = DFU_STATE_dfuERROR; - } + dfu_set_defer_flush(dfu_get_entity(f_dfu->altsetting)); } static inline int dfu_get_manifest_timeout(struct dfu_entity *dfu) diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c index 87e54eb..a54b4ee 100644 --- a/drivers/usb/gadget/f_fastboot.c +++ b/drivers/usb/gadget/f_fastboot.c @@ -382,7 +382,7 @@ static void cb_getvar(struct usb_ep *ep, struct usb_request *req) strsep(&cmd, ":"); if (!cmd) { - error("missing variable\n"); + error("missing variable"); fastboot_tx_write_str("FAILmissing var"); return; } @@ -413,7 +413,7 @@ static void cb_getvar(struct usb_ep *ep, struct usb_request *req) else strcpy(response, "FAILValue not set"); } else { - error("unknown variable: %s\n", cmd); + printf("WARNING: unknown variable: %s\n", cmd); strcpy(response, "FAILVariable not implemented"); } fastboot_tx_write_str(response); @@ -561,7 +561,7 @@ static void cb_flash(struct usb_ep *ep, struct usb_request *req) strsep(&cmd, ":"); if (!cmd) { - error("missing partition name\n"); + error("missing partition name"); fastboot_tx_write_str("FAILmissing partition name"); return; } @@ -683,7 +683,7 @@ static void rx_handler_command(struct usb_ep *ep, struct usb_request *req) } if (!func_cb) { - error("unknown command: %s\n", cmdbuf); + error("unknown command: %s", cmdbuf); fastboot_tx_write_str("FAILunknown command"); } else { if (req->actual < req->length) { @@ -691,7 +691,7 @@ static void rx_handler_command(struct usb_ep *ep, struct usb_request *req) buf[req->actual] = 0; func_cb(ep, req); } else { - error("buffer overflow\n"); + error("buffer overflow"); fastboot_tx_write_str("FAILbuffer overflow"); } } diff --git a/drivers/usb/host/ehci-generic.c b/drivers/usb/host/ehci-generic.c index 84114c5..4444988 100644 --- a/drivers/usb/host/ehci-generic.c +++ b/drivers/usb/host/ehci-generic.c @@ -6,6 +6,7 @@ #include <common.h> #include <clk.h> +#include <asm/io.h> #include <dm.h> #include "ehci.h" @@ -20,7 +21,7 @@ struct generic_ehci { static int ehci_usb_probe(struct udevice *dev) { - struct ehci_hccr *hccr = (struct ehci_hccr *)dev_get_addr(dev); + struct ehci_hccr *hccr; struct ehci_hcor *hcor; int i; @@ -36,6 +37,7 @@ static int ehci_usb_probe(struct udevice *dev) clk_dev->name, clk_id); } + hccr = map_physmem(dev_get_addr(dev), 0x100, MAP_NOCACHE); hcor = (struct ehci_hcor *)((uintptr_t)hccr + HC_LENGTH(ehci_readl(&hccr->cr_capbase))); diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index c664b16..8f259be 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -134,6 +134,8 @@ static void ehci_set_usbmode(struct ehci_ctrl *ctrl) tmp |= USBMODE_CM_HC; #if defined(CONFIG_EHCI_MMIO_BIG_ENDIAN) tmp |= USBMODE_BE; +#else + tmp &= ~USBMODE_BE; #endif ehci_writel(reg_ptr, tmp); } @@ -245,7 +247,7 @@ static int ehci_td_buffer(struct qTD *td, void *buf, size_t sz) idx = 0; while (idx < QT_BUFFER_CNT) { - td->qt_buffer[idx] = cpu_to_hc32(addr); + td->qt_buffer[idx] = cpu_to_hc32(virt_to_phys((void *)addr)); td->qt_buffer_hi[idx] = 0; next = (addr + EHCI_PAGE_SIZE) & ~(EHCI_PAGE_SIZE - 1); delta = next - addr; @@ -398,7 +400,7 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer, * qh_overlay.qt_next ...... 13-10 H * - qh_overlay.qt_altnext */ - qh->qh_link = cpu_to_hc32((unsigned long)&ctrl->qh_list | QH_LINK_TYPE_QH); + qh->qh_link = cpu_to_hc32(virt_to_phys(&ctrl->qh_list) | QH_LINK_TYPE_QH); c = (dev->speed != USB_SPEED_HIGH) && !usb_pipeendpoint(pipe); maxpacket = usb_maxpacket(dev, pipe); endpt = QH_ENDPT1_RL(8) | QH_ENDPT1_C(c) | @@ -415,7 +417,6 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer, qh->qh_overlay.qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); tdp = &qh->qh_overlay.qt_next; - if (req != NULL) { /* * Setup request qTD (3.5 in ehci-r10.pdf) @@ -438,7 +439,7 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer, goto fail; } /* Update previous qTD! */ - *tdp = cpu_to_hc32((unsigned long)&qtd[qtd_counter]); + *tdp = cpu_to_hc32(virt_to_phys(&qtd[qtd_counter])); tdp = &qtd[qtd_counter++].qt_next; toggle = 1; } @@ -497,7 +498,7 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer, goto fail; } /* Update previous qTD! */ - *tdp = cpu_to_hc32((unsigned long)&qtd[qtd_counter]); + *tdp = cpu_to_hc32(virt_to_phys(&qtd[qtd_counter])); tdp = &qtd[qtd_counter++].qt_next; /* * Data toggle has to be adjusted since the qTD transfer @@ -528,11 +529,11 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer, QT_TOKEN_STATUS(QT_TOKEN_STATUS_ACTIVE); qtd[qtd_counter].qt_token = cpu_to_hc32(token); /* Update previous qTD! */ - *tdp = cpu_to_hc32((unsigned long)&qtd[qtd_counter]); + *tdp = cpu_to_hc32(virt_to_phys(&qtd[qtd_counter])); tdp = &qtd[qtd_counter++].qt_next; } - ctrl->qh_list.qh_link = cpu_to_hc32((unsigned long)qh | QH_LINK_TYPE_QH); + ctrl->qh_list.qh_link = cpu_to_hc32(virt_to_phys(qh) | QH_LINK_TYPE_QH); /* Flush dcache */ flush_dcache_range((unsigned long)&ctrl->qh_list, @@ -542,7 +543,7 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer, ALIGN_END_ADDR(struct qTD, qtd, qtd_count)); /* Set async. queue head pointer. */ - ehci_writel(&ctrl->hcor->or_asynclistaddr, (unsigned long)&ctrl->qh_list); + ehci_writel(&ctrl->hcor->or_asynclistaddr, virt_to_phys(&ctrl->qh_list)); usbsts = ehci_readl(&ctrl->hcor->or_usbsts); ehci_writel(&ctrl->hcor->or_usbsts, (usbsts & 0x3f)); @@ -989,7 +990,7 @@ static int ehci_common_init(struct ehci_ctrl *ctrl, uint tweaks) /* Set head of reclaim list */ memset(qh_list, 0, sizeof(*qh_list)); - qh_list->qh_link = cpu_to_hc32((unsigned long)qh_list | QH_LINK_TYPE_QH); + qh_list->qh_link = cpu_to_hc32(virt_to_phys(qh_list) | QH_LINK_TYPE_QH); qh_list->qh_endpt1 = cpu_to_hc32(QH_ENDPT1_H(1) | QH_ENDPT1_EPS(USB_SPEED_HIGH)); qh_list->qh_overlay.qt_next = cpu_to_hc32(QT_NEXT_TERMINATE); @@ -1001,7 +1002,7 @@ static int ehci_common_init(struct ehci_ctrl *ctrl, uint tweaks) ALIGN_END_ADDR(struct QH, qh_list, 1)); /* Set async. queue head pointer. */ - ehci_writel(&ctrl->hcor->or_asynclistaddr, (unsigned long)qh_list); + ehci_writel(&ctrl->hcor->or_asynclistaddr, virt_to_phys(qh_list)); /* * Set up periodic list diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index b41c04a..826b3fe 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -102,8 +102,9 @@ struct usb_linux_config_descriptor { } __attribute__ ((packed)); #if defined CONFIG_EHCI_DESC_BIG_ENDIAN -#define ehci_readl(x) (*((volatile u32 *)(x))) -#define ehci_writel(a, b) (*((volatile u32 *)(a)) = ((volatile u32)b)) +#define ehci_readl(x) cpu_to_be32((*((volatile u32 *)(x)))) +#define ehci_writel(a, b) (*((volatile u32 *)(a)) = \ + cpu_to_be32(((volatile u32)b))) #else #define ehci_readl(x) cpu_to_le32((*((volatile u32 *)(x)))) #define ehci_writel(a, b) (*((volatile u32 *)(a)) = \ diff --git a/include/configs/bcm28155_ap.h b/include/configs/bcm28155_ap.h index a257084..c9515a8 100644 --- a/include/configs/bcm28155_ap.h +++ b/include/configs/bcm28155_ap.h @@ -130,7 +130,6 @@ #define CONFIG_CMD_BOOTZ #define CONFIG_FAT_WRITE - /* Fastboot and USB OTG */ #define CONFIG_USB_FUNCTION_FASTBOOT #define CONFIG_CMD_FASTBOOT @@ -150,23 +149,4 @@ #define CONFIG_G_DNL_PRODUCT_NUM 0x0d02 /* nexus one */ #define CONFIG_G_DNL_MANUFACTURER "Broadcom Corporation" -/* Fastboot and USB OTG */ -#define CONFIG_USB_FUNCTION_FASTBOOT -#define CONFIG_CMD_FASTBOOT -#define CONFIG_FASTBOOT_FLASH -#define CONFIG_FASTBOOT_FLASH_MMC_DEV 0 -#define CONFIG_SYS_CACHELINE_SIZE 64 -#define CONFIG_USB_FASTBOOT_BUF_SIZE (CONFIG_SYS_SDRAM_SIZE - SZ_1M) -#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_SDRAM_BASE -#define CONFIG_USB_GADGET -#define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 0 -#define CONFIG_USB_GADGET_S3C_UDC_OTG -#define CONFIG_USB_GADGET_BCM_UDC_OTG_PHY -#define CONFIG_USB_GADGET_DOWNLOAD -#define CONFIG_USBID_ADDR 0x34052c46 -#define CONFIG_G_DNL_VENDOR_NUM 0x18d1 /* google */ -#define CONFIG_G_DNL_PRODUCT_NUM 0x0d02 /* nexus one */ -#define CONFIG_G_DNL_MANUFACTURER "Broadcom Corporation" - #endif /* __BCM28155_AP_H */ diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h index ffc6811..a94b1e2 100644 --- a/include/configs/bur_am335x_common.h +++ b/include/configs/bur_am335x_common.h @@ -3,7 +3,7 @@ * * common parts used by B&R AM335x based boards * - * Copyright (C) 2013 Hannes Schmelzer <oe5hpm@oevsv.at> - + * Copyright (C) 2016 Hannes Schmelzer <oe5hpm@oevsv.at> - * Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com * * SPDX-License-Identifier: GPL-2.0+ @@ -12,25 +12,9 @@ #ifndef __BUR_AM335X_COMMON_H__ #define __BUR_AM335X_COMMON_H__ /* ------------------------------------------------------------------------- */ -#define BUR_COMMON_ENV \ -"usbscript=usb start && fatload usb 0 0x80000000 usbscript.img && source\0" \ -"brdefaultip=if test -r ${ipaddr}; then; else" \ -" setenv ipaddr 192.168.60.1; setenv serverip 192.168.60.254;" \ -" setenv gatewayip 192.168.60.254; setenv netmask 255.255.255.0; fi;\0" \ -"netconsole=echo switching to network console ...; " \ -"if dhcp; then; else run brdefaultip; fi; setenv ncip ${serverip}; " \ -"setcurs 1 9; lcdputs myip; setcurs 10 9; lcdputs ${ipaddr};" \ -"setcurs 1 10;lcdputs serverip; setcurs 10 10; lcdputs ${serverip};" \ -"setenv stdout nc;setenv stdin nc;setenv stderr nc\0" - -#define CONFIG_PREBOOT "run brdefaultip" -#define CONFIG_CMD_TIME - - #define CONFIG_AM33XX #define CONFIG_OMAP #define CONFIG_OMAP_COMMON -#define CONFIG_BOARD_LATE_INIT #define CONFIG_SYS_CACHELINE_SIZE 64 #define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ @@ -53,24 +37,11 @@ #define CONFIG_BAUDRATE 115200 /* Network defines */ -#define CONFIG_CMD_DHCP -#define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */ -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_NET_RETRY_COUNT 2 -#define CONFIG_CMD_PING #define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */ #define CONFIG_MII /* Required in net/eth.c */ -#define CONFIG_SPL_ETH_SUPPORT #define CONFIG_PHYLIB #define CONFIG_PHY_NATSEMI -#define CONFIG_SPL_NET_SUPPORT -#define CONFIG_SPL_ENV_SUPPORT /* used for a fetching MAC-Address */ -#define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL" -/* Network console */ -#define CONFIG_NETCONSOLE 1 -#define CONFIG_BOOTP_MAY_FAIL /* if we don't have DHCP environment */ + /* * SPL related defines. The Public RAM memory map the ROM defines the * area between 0x402F0400 and 0x4030B800 as a download area and @@ -109,42 +80,8 @@ #define CONFIG_SYS_OMAP24_I2C_SPEED 100000 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1 #define CONFIG_SYS_I2C_OMAP24XX -#define CONFIG_CMD_I2C /* GPIO */ #define CONFIG_OMAP_GPIO -/* - * ---------------------------------------------------------------------------- - * The following are general good-enough settings for U-Boot. We set a - * large malloc pool as we generally have a lot of DDR, and we opt for - * function over binary size in the main portion of U-Boot as this is - * generally easily constrained later if needed. We enable the config - * options that give us information in the environment about what board - * we are on so we do not need to rely on the command prompt. We set a - * console baudrate of 115200 and use the default baud rate table. - */ -#define CONFIG_SYS_MALLOC_LEN (5120 << 10) -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_CONSOLE_INFO_QUIET -#define CONFIG_ENV_OVERWRITE /* Overwrite ethaddr / serial# */ -#define CONFIG_SYS_CONSOLE_IS_IN_ENV -#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE - -/* As stated above, the following choices are optional. */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING -#define CONFIG_VERSION_VARIABLE - -/* We set the max number of command args high to avoid HUSH bugs. */ -#define CONFIG_SYS_MAXARGS 64 - -/* Console I/O Buffer Size */ -#define CONFIG_SYS_CBSIZE 512 -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE +\ - sizeof(CONFIG_SYS_PROMPT) + 16) -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* * Our platforms make use of SPL to initalize the hardware (primarily diff --git a/include/configs/bur_cfg_common.h b/include/configs/bur_cfg_common.h new file mode 100644 index 0000000..f183775 --- /dev/null +++ b/include/configs/bur_cfg_common.h @@ -0,0 +1,64 @@ +/* + * bur_cfg_common.h + * + * common parts used over all B&R boards + * + * Copyright (C) 2016 Hannes Schmelzer <oe5hpm@oevsv.at> - + * Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __BUR_CFG_COMMON_H__ +#define __BUR_CFG_COMMON_H__ +/* ------------------------------------------------------------------------- */ +#define BUR_COMMON_ENV \ +"usbscript=usb start && fatload usb 0 ${scradr} usbscript.img &&" \ +" source ${scradr}\0" \ +"brdefaultip=if test -r ${ipaddr}; then; else" \ +" setenv ipaddr 192.168.60.1; setenv serverip 192.168.60.254;" \ +" setenv gatewayip 192.168.60.254; setenv netmask 255.255.255.0; fi;\0" \ +"netconsole=echo switching to network console ...; " \ +"if dhcp; then; else run brdefaultip; fi; setenv ncip ${serverip}; " \ +"setcurs 1 9; lcdputs myip; setcurs 10 9; lcdputs ${ipaddr};" \ +"setcurs 1 10;lcdputs serverip; setcurs 10 10; lcdputs ${serverip};" \ +"setenv stdout nc;setenv stdin nc;setenv stderr nc\0" + +#define CONFIG_PREBOOT "run cfgscr; run brdefaultip" + +#define CONFIG_BOARD_LATE_INIT + +/* Network defines */ +#define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */ +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_NET_RETRY_COUNT 2 + +/* Network console */ +#define CONFIG_NETCONSOLE 1 +#define CONFIG_BOOTP_MAY_FAIL /* if we don't have DHCP environment */ + +#define CONFIG_SYS_CONSOLE_INFO_QUIET +#define CONFIG_ENV_OVERWRITE /* Overwrite ethaddr / serial# */ +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE + +/* As stated above, the following choices are optional. */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_AUTO_COMPLETE +#define CONFIG_CMDLINE_EDITING +#define CONFIG_VERSION_VARIABLE + +/* We set the max number of command args high to avoid HUSH bugs. */ +#define CONFIG_SYS_MAXARGS 64 + +/* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 512 +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE +\ + sizeof(CONFIG_SYS_PROMPT) + 16) +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#endif /* __BUR_CFG_COMMON_H__ */ diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h index d3cd38d..1c1951c 100644 --- a/include/configs/cm_t43.h +++ b/include/configs/cm_t43.h @@ -18,10 +18,12 @@ #include <asm/arch/omap.h> /* Serial support */ -#define CONFIG_DM_SERIAL #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_CLK 48000000 #define CONFIG_SYS_NS16550_COM1 0x44e09000 +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#endif /* NAND support */ #define CONFIG_NAND @@ -68,9 +70,7 @@ #define CONFIG_AM437X_USB2PHY2_HOST /* SPI Flash support */ -#define CONFIG_SPI_FLASH #define CONFIG_TI_SPI_MMAP -#define CONFIG_SPI_FLASH_BAR #define CONFIG_SF_DEFAULT_SPEED 48000000 #define CONFIG_DEFAULT_SPI_MODE SPI_MODE_3 @@ -98,9 +98,8 @@ #undef CONFIG_SPL_OS_BOOT #undef CONFIG_SPL_GPIO_SUPPORT #undef CONFIG_SPL_NAND_SUPPORT -#undef CONFIG_SPL_BOARD_INIT -#undef CONFIG_BOOTDELAY -#include <config_distro_defaults.h> +#undef CONFIG_SYS_MONITOR_LEN +#undef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR #define CONFIG_ZERO_BOOTDELAY_CHECK #undef CONFIG_CMD_IMLS @@ -165,8 +164,12 @@ #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + (128 << 20)) #define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SYS_SPI_U_BOOT_OFFS (256 * 1024) +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x480 #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD +#define CONFIG_SPL_I2C_SUPPORT +#define CONFIG_SPL_POWER_SUPPORT #endif /* __CONFIG_CM_T43_H */ diff --git a/include/configs/kwb.h b/include/configs/kwb.h index 45253b8..60e6496 100644 --- a/include/configs/kwb.h +++ b/include/configs/kwb.h @@ -12,6 +12,7 @@ #ifndef __CONFIG_KWB_H__ #define __CONFIG_KWB_H__ +#include <configs/bur_cfg_common.h> #include <configs/bur_am335x_common.h> /* ------------------------------------------------------------------------- */ #define CONFIG_AM335X_LCD @@ -27,6 +28,9 @@ #define CONFIG_BMP_24BMP #define CONFIG_BMP_32BPP +/* memory */ +#define CONFIG_SYS_MALLOC_LEN (5 * 1024 * 1024) + /* Clock Defines */ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK) @@ -103,10 +107,9 @@ BUR_COMMON_ENV \ #define CONFIG_BOOTDELAY 0 /* undefine command which we not need here */ -#undef CONFIG_BOOTM_NETBSD -#undef CONFIG_BOOTM_PLAN9 -#undef CONFIG_BOOTM_RTEMS -#undef CONFIG_CMD_CRC32 +#undef CONFIG_BOOTM_NETBSD +#undef CONFIG_BOOTM_PLAN9 +#undef CONFIG_BOOTM_RTEMS /* Support both device trees and ATAGs. */ #define CONFIG_OF_LIBFDT @@ -122,17 +125,11 @@ BUR_COMMON_ENV \ #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT /* attention! not only for gadget, enables also highspeed in hostmode */ #define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_MUSB_HOST #define CONFIG_AM335X_USB0 #define CONFIG_AM335X_USB0_MODE MUSB_HOST #define CONFIG_AM335X_USB1 #define CONFIG_AM335X_USB1_MODE MUSB_HOST -#ifdef CONFIG_USB_MUSB_HOST -#define CONFIG_CMD_USB -#define CONFIG_USB_STORAGE -#endif /* CONFIG_USB_MUSB_HOST */ - #undef CONFIG_ENV_IS_NOWHERE #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 @@ -151,4 +148,4 @@ BUR_COMMON_ENV \ #define CONFIG_CMD_FS_GENERIC #endif /* CONFIG_MMC, ... */ -#endif /* ! __CONFIG_TSERIES_H__ */ +#endif /* __CONFIG_KWB_H__ */ diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index f6efc55..39d747f 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -42,7 +42,7 @@ unsigned long get_board_sys_clk(void); unsigned long get_board_ddr_clk(void); #endif -#ifdef CONFIG_QSPI_BOOT +#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) #define CONFIG_SYS_CLK_FREQ 100000000 #define CONFIG_DDR_CLK_FREQ 100000000 #define CONFIG_QIXIS_I2C_ACCESS @@ -56,7 +56,13 @@ unsigned long get_board_ddr_clk(void); #endif #ifdef CONFIG_SD_BOOT -#define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg +#ifdef CONFIG_SD_BOOT_QSPI +#define CONFIG_SYS_FSL_PBL_RCW \ + board/freescale/ls1021aqds/ls102xa_rcw_sd_qspi.cfg +#else +#define CONFIG_SYS_FSL_PBL_RCW \ + board/freescale/ls1021aqds/ls102xa_rcw_sd_ifc.cfg +#endif #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" #define CONFIG_SPL_LIBCOMMON_SUPPORT @@ -87,6 +93,9 @@ unsigned long get_board_ddr_clk(void); #ifdef CONFIG_QSPI_BOOT #define CONFIG_SYS_TEXT_BASE 0x40010000 +#endif + +#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) #define CONFIG_SYS_NO_FLASH #endif @@ -162,7 +171,7 @@ unsigned long get_board_ddr_clk(void); /* * IFC Definitions */ -#ifndef CONFIG_QSPI_BOOT +#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) #define CONFIG_FSL_IFC #define CONFIG_SYS_FLASH_BASE 0x60000000 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE @@ -375,7 +384,9 @@ unsigned long get_board_ddr_clk(void); #else #define CONFIG_CONS_INDEX 1 #define CONFIG_SYS_NS16550_SERIAL +#ifndef CONFIG_DM_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 +#endif #define CONFIG_SYS_NS16550_CLK get_serial_clock() #endif @@ -410,7 +421,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_DOS_PARTITION /* SPI */ -#ifdef CONFIG_QSPI_BOOT +#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) /* QSPI */ #define QSPI0_AMBA_BASE 0x40000000 #define FSL_QSPI_FLASH_SIZE (1 << 24) @@ -555,6 +566,10 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_CMDLINE_TAG #define CONFIG_CMDLINE_EDITING +#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) +#undef CONFIG_CMD_IMLS +#endif + #define CONFIG_ARMV7_NONSEC #define CONFIG_ARMV7_VIRT #define CONFIG_PEN_ADDR_BIG_ENDIAN diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h index 4ab8e13..158cf02 100644 --- a/include/configs/ls1043aqds.h +++ b/include/configs/ls1043aqds.h @@ -379,6 +379,19 @@ unsigned long get_board_ddr_clk(void); #endif #endif +/* USB */ +#define CONFIG_HAS_FSL_XHCI_USB +#ifdef CONFIG_HAS_FSL_XHCI_USB +#define CONFIG_USB_XHCI +#define CONFIG_USB_XHCI_FSL +#define CONFIG_USB_XHCI_DWC3 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 3 +#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 +#define CONFIG_CMD_USB +#define CONFIG_USB_STORAGE +#define CONFIG_CMD_EXT2 +#endif + /* * Miscellaneous configurable options */ diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h index 506f50d..bc40b06 100644 --- a/include/configs/ls1043ardb.h +++ b/include/configs/ls1043ardb.h @@ -268,6 +268,13 @@ #define CONFIG_ETHPRIME "FM1@DTSEC3" #endif +/* QE */ +#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \ + !defined(CONFIG_QSPI_BOOT) +#define CONFIG_U_QE +#endif +#define CONFIG_SYS_QE_FW_ADDR 0x60600000 + /* USB */ #define CONFIG_HAS_FSL_XHCI_USB #ifdef CONFIG_HAS_FSL_XHCI_USB diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h index def0a6f..64b82e8 100644 --- a/include/configs/ls2080a_common.h +++ b/include/configs/ls2080a_common.h @@ -264,14 +264,17 @@ unsigned long long get_qixis_addr(void); "kernel_start=0x581200000\0" \ "kernel_load=0xa0000000\0" \ "kernel_size=0x2800000\0" \ - "console=ttyAMA0,38400n8\0" + "console=ttyAMA0,38400n8\0" \ + "mcinitcmd=fsl_mc start mc 0x580300000" \ + " 0x580800000 \0" #define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0 " \ "earlycon=uart8250,mmio,0x21c0500" \ "ramdisk_size=0x2000000 default_hugepagesz=2m" \ - " hugepagesz=2m hugepages=16" -#define CONFIG_BOOTCOMMAND "cp.b $kernel_start $kernel_load " \ - "$kernel_size && bootm $kernel_load" + " hugepagesz=2m hugepages=256" +#define CONFIG_BOOTCOMMAND "fsl_mc apply dpl 0x580700000 &&" \ + " cp.b $kernel_start $kernel_load" \ + " $kernel_size && bootm $kernel_load" #define CONFIG_BOOTDELAY 10 /* Monitor Command Prompt */ diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h index a402c06..dab3820 100644 --- a/include/configs/ls2080aqds.h +++ b/include/configs/ls2080aqds.h @@ -346,7 +346,9 @@ unsigned long get_board_ddr_clk(void); "initrd_high=0xffffffffffffffff\0" \ "kernel_start=0x581100000\0" \ "kernel_load=0xa0000000\0" \ - "kernel_size=0x2800000\0" + "kernel_size=0x2800000\0" \ + "mcinitcmd=fsl_mc start mc 0x580300000" \ + " 0x580800000 \0" #ifdef CONFIG_FSL_MC_ENET #define CONFIG_FSL_MEMAC diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index 116dbcd..b2c0181 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -327,13 +327,15 @@ unsigned long get_board_sys_clk(void); "initrd_high=0xffffffffffffffff\0" \ "kernel_start=0x581100000\0" \ "kernel_load=0xa0000000\0" \ - "kernel_size=0x2800000\0" + "kernel_size=0x2800000\0" \ + "mcinitcmd=fsl_mc start mc 0x580300000" \ + " 0x580800000 \0" #undef CONFIG_BOOTARGS #define CONFIG_BOOTARGS "console=ttyS1,115200 root=/dev/ram0 " \ "earlycon=uart8250,mmio,0x21c0600" \ "ramdisk_size=0x2000000 default_hugepagesz=2m" \ - " hugepagesz=2m hugepages=16" + " hugepagesz=2m hugepages=256" /* MAC/PHY configuration */ #ifdef CONFIG_FSL_MC_ENET diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h index 648e48b..500f0f9 100644 --- a/include/configs/odroid_xu3.h +++ b/include/configs/odroid_xu3.h @@ -69,6 +69,7 @@ #define CONFIG_CMD_DFU #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M #define DFU_DEFAULT_POLL_TIMEOUT 300 +#define DFU_MANIFEST_POLL_TIMEOUT 25000 /* THOR */ #define CONFIG_G_DNL_THOR_VENDOR_NUM CONFIG_G_DNL_VENDOR_NUM diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index fba2a12..0fc9d1c 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -40,7 +40,7 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO - +#define CONFIG_BOARD_LATE_INIT #define CONFIG_MISC_INIT_R /* misc_init_r dumps the die id */ #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS diff --git a/include/configs/rpi-common.h b/include/configs/rpi-common.h index 97e5d2c..e07fa65 100644 --- a/include/configs/rpi-common.h +++ b/include/configs/rpi-common.h @@ -68,6 +68,7 @@ #define CONFIG_FB_ADDR 0 #define CONFIG_VIDEO_BCM2835 #define CONFIG_SYS_WHITE_ON_BLACK +#define CONFIG_CONSOLE_SCROLL_LINES 10 /* SD/MMC configuration */ #define CONFIG_GENERIC_MMC diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index 8de0ab9..0501bd1 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -30,6 +30,9 @@ #define CONFIG_TIMESTAMP /* Print image info with timestamp */ +/* add target to build it automatically upon "make" */ +#define CONFIG_BUILD_TARGET "u-boot-with-spl.sfp" + /* * Memory configurations */ diff --git a/include/configs/stm32f746-disco.h b/include/configs/stm32f746-disco.h new file mode 100644 index 0000000..e1b8bcb --- /dev/null +++ b/include/configs/stm32f746-disco.h @@ -0,0 +1,89 @@ +/* + * (C) Copyright 2016 + * Vikas Manocha, <vikas.manocha@st.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_SYS_THUMB_BUILD +#define CONFIG_SYS_NO_FLASH + +#define CONFIG_OF_LIBFDT +#define CONFIG_BOARD_EARLY_INIT_F + +#define CONFIG_SYS_FLASH_BASE 0x08000000 +#define CONFIG_SYS_INIT_SP_ADDR 0x20050000 +#define CONFIG_SYS_TEXT_BASE 0x08000000 + +#define CONFIG_SYS_ICACHE_OFF +#define CONFIG_SYS_DCACHE_OFF + +/* + * Configuration of the external SDRAM memory + */ +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_SYS_RAM_SIZE ((64 + 192) << 10) +#define CONFIG_SYS_RAM_CS 1 +#define CONFIG_SYS_RAM_FREQ_DIV 2 +#define CONFIG_SYS_RAM_BASE 0x20000000 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_RAM_BASE +#define CONFIG_SYS_LOAD_ADDR 0x20000000 +#define CONFIG_LOADADDR 0x20000000 + +#define CONFIG_SYS_MAX_FLASH_SECT 12 +#define CONFIG_SYS_MAX_FLASH_BANKS 2 + +#ifndef CONFIG_SYS_NO_FLASH +#define CONFIG_ENV_IS_IN_FLASH +#else +#define CONFIG_ENV_IS_NOWHERE +#endif +#define CONFIG_ENV_SIZE (8 << 10) + +#define CONFIG_STM32_GPIO +#define CONFIG_STM32X7_SERIAL + +#define CONFIG_SYS_CLK_FREQ 16*1000*1000 /* 180 MHz */ +#define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer is clocked at 1MHz */ + +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_REVISION_TAG + +#define CONFIG_SYS_CBSIZE 1024 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ + + sizeof(CONFIG_SYS_PROMPT) + 16) + +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_MALLOC_LEN (16 * 1024) +#define CONFIG_STACKSIZE (64 << 10) + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_BOOTARGS \ + "console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel" +#define CONFIG_BOOTCOMMAND \ + "run bootcmd_romfs" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "bootargs_romfs=uclinux.physaddr=0x08180000 root=/dev/mtdblock0\0" \ + "bootcmd_romfs=setenv bootargs ${bootargs} ${bootargs_romfs};" \ + "bootm 0x08044000 - 0x08042000\0" + +#define CONFIG_BOOTDELAY 3 + +/* + * Command line configuration. + */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_AUTO_COMPLETE +#define CONFIG_CMDLINE_EDITING + +#define CONFIG_CMD_MEM +#define CONFIG_CMD_TIMER +#undef CONFIG_CMD_IMLS +#endif /* __CONFIG_H */ diff --git a/include/configs/tseries.h b/include/configs/tseries.h index 93e3454..43cf965 100644 --- a/include/configs/tseries.h +++ b/include/configs/tseries.h @@ -12,6 +12,7 @@ #ifndef __CONFIG_TSERIES_H__ #define __CONFIG_TSERIES_H__ +#include <configs/bur_cfg_common.h> #include <configs/bur_am335x_common.h> /* ------------------------------------------------------------------------- */ #define CONFIG_AM335X_LCD @@ -30,6 +31,10 @@ #define CONFIG_SYS_BOOTCOUNT_ADDR 0x44E3E000 #define CONFIG_BOOTCOUNT_LIMIT #define CONFIG_BOOTCOUNT_AM33XX + +/* memory */ +#define CONFIG_SYS_MALLOC_LEN (5 * 1024 * 1024) + /* Clock Defines */ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK) @@ -204,7 +209,6 @@ MMCARGS #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x8000000 #define CONFIG_NAND_OMAP_GPMC -#define CONFIG_CMD_NAND /* don't change OMAP_ELM, ECCSCHEME. ROM code only supports this */ #define CONFIG_NAND_OMAP_ELM #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW @@ -249,23 +253,15 @@ MMCARGS #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT /* attention! not only for gadget, enables also highspeed in hostmode */ #define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_MUSB_HOST #define CONFIG_AM335X_USB0 #define CONFIG_AM335X_USB0_MODE MUSB_HOST #define CONFIG_AM335X_USB1 #define CONFIG_AM335X_USB1_MODE MUSB_HOST -#ifdef CONFIG_USB_MUSB_HOST -#define CONFIG_CMD_USB -#define CONFIG_USB_STORAGE -#endif /* CONFIG_USB_MUSB_HOST */ - #if defined(CONFIG_SPI_BOOT) /* McSPI IP block */ #define CONFIG_SPI #define CONFIG_OMAP3_SPI -#define CONFIG_CMD_SPI -#define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 24000000 #define CONFIG_SPL_SPI_SUPPORT diff --git a/include/dfu.h b/include/dfu.h index 6118dc2..f39d3f1 100644 --- a/include/dfu.h +++ b/include/dfu.h @@ -163,6 +163,31 @@ int dfu_read(struct dfu_entity *de, void *buf, int size, int blk_seq_num); int dfu_write(struct dfu_entity *de, void *buf, int size, int blk_seq_num); int dfu_flush(struct dfu_entity *de, void *buf, int size, int blk_seq_num); +/* + * dfu_defer_flush - pointer to store dfu_entity for deferred flashing. + * It should be NULL when not used. + */ +extern struct dfu_entity *dfu_defer_flush; +/** + * dfu_get_defer_flush - get current value of dfu_defer_flush pointer + * + * @return - value of the dfu_defer_flush pointer + */ +static inline struct dfu_entity *dfu_get_defer_flush(void) +{ + return dfu_defer_flush; +} + +/** + * dfu_set_defer_flush - set the dfu_defer_flush pointer + * + * @param dfu - pointer to the dfu_entity, which should be written + */ +static inline void dfu_set_defer_flush(struct dfu_entity *dfu) +{ + dfu_defer_flush = dfu; +} + /** * dfu_write_from_mem_addr - write data from memory to DFU managed medium * diff --git a/include/dm/platform_data/serial_stm32x7.h b/include/dm/platform_data/serial_stm32x7.h new file mode 100644 index 0000000..328a8a3 --- /dev/null +++ b/include/dm/platform_data/serial_stm32x7.h @@ -0,0 +1,17 @@ +/* + * (C) Copyright 2016 + * Vikas Manocha, <vikas.manocha@st.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __SERIAL_STM32x7_H +#define __SERIAL_STM32x7_H + +/* Information about a serial port */ +struct stm32x7_serial_platdata { + struct stm32_usart *base; /* address of registers in physical memory */ + unsigned int clock; +}; + +#endif /* __SERIAL_STM32x7_H */ diff --git a/include/fsl_fman.h b/include/fsl_fman.h index 4d04415..f3e35f8 100644 --- a/include/fsl_fman.h +++ b/include/fsl_fman.h @@ -460,4 +460,5 @@ typedef struct ccsr_fman { u8 res5[4*1024]; } ccsr_fman_t; +void fdt_fixup_fman_firmware(void *blob); #endif /*__FSL_FMAN_H__*/ diff --git a/drivers/qe/qe.h b/include/fsl_qe.h index 77b18e9..77b18e9 100644 --- a/drivers/qe/qe.h +++ b/include/fsl_qe.h diff --git a/include/power/tps65218.h b/include/power/tps65218.h index 63fc7b3..4d68faa 100644 --- a/include/power/tps65218.h +++ b/include/power/tps65218.h @@ -8,6 +8,8 @@ #ifndef __POWER_TPS65218_H__ #define __POWER_TPS65218_H__ +#include <linux/bitops.h> + /* I2C chip address */ #define TPS65218_CHIP_PM 0x24 @@ -60,8 +62,18 @@ enum { #define TPS65218_DCDC_VOLT_SEL_1260MV 0x29 #define TPS65218_DCDC_VOLT_SEL_1330MV 0x30 +#define TPS65218_CC_STAT (BIT(0) | BIT(1)) +#define TPS65218_STATE (BIT(2) | BIT(3)) +#define TPS65218_PB_STATE BIT(4) +#define TPS65218_AC_STATE BIT(5) +#define TPS65218_EE BIT(6) +#define TPS65218_FSEAL BIT(7) + +int tps65218_reg_read(uchar dest_reg, uchar *dest_val); int tps65218_reg_write(uchar prot_level, uchar dest_reg, uchar dest_val, uchar mask); int tps65218_voltage_update(uchar dc_cntrl_reg, uchar volt_sel); +int tps65218_toggle_fseal(void); +int tps65218_lock_fseal(void); int power_tps65218_init(unsigned char bus); #endif /* __POWER_TPS65218_H__ */ diff --git a/test/py/u_boot_console_base.py b/test/py/u_boot_console_base.py index bc2bd76..318e288 100644 --- a/test/py/u_boot_console_base.py +++ b/test/py/u_boot_console_base.py @@ -303,8 +303,15 @@ class ConsoleBase(object): if not self.config.gdbserver: self.p.timeout = 30000 self.p.logfile_read = self.logstream - if self.config.buildconfig.get('config_spl', False) == 'y': - m = self.p.expect([pattern_u_boot_spl_signon] + self.bad_patterns) + bcfg = self.config.buildconfig + config_spl = bcfg.get('config_spl', 'n') == 'y' + config_spl_serial_support = bcfg.get('config_spl_serial_support', + 'n') == 'y' + env_spl_skipped = self.config.env.get('env__spl_skipped', + False) + if config_spl and config_spl_serial_support and not env_spl_skipped: + m = self.p.expect([pattern_u_boot_spl_signon] + + self.bad_patterns) if m != 0: raise Exception('Bad pattern found on console: ' + self.bad_pattern_ids[m - 1]) diff --git a/tools/Makefile b/tools/Makefile index 1382b05..2881a7c 100644 --- a/tools/Makefile +++ b/tools/Makefile @@ -129,6 +129,14 @@ endif ifneq ($(CONFIG_MX23)$(CONFIG_MX28)$(CONFIG_FIT_SIGNATURE),) HOSTLOADLIBES_mkimage += \ $(shell pkg-config --libs libssl libcrypto 2> /dev/null || echo "-lssl -lcrypto") + +# OS X deprecate openssl in favour of CommonCrypto, supress deprecation +# warnings on those systems +ifeq ($(HOSTOS),darwin) +HOSTCFLAGS_mxsimage.o += -Wno-deprecated-declarations +HOSTCFLAGS_image-sig.o += -Wno-deprecated-declarations +HOSTCFLAGS_rsa-sign.o += -Wno-deprecated-declarations +endif endif HOSTLOADLIBES_dumpimage := $(HOSTLOADLIBES_mkimage) diff --git a/tools/buildman/README b/tools/buildman/README index 66502af..6f41008 100644 --- a/tools/buildman/README +++ b/tools/buildman/README @@ -157,7 +157,7 @@ aarch64: /opt/linaro/gcc-linaro-aarch64-none-elf-4.8-2013.10_linux x86: i386 blackfin: bfin nds32: nds32le -openrisc: or32 +openrisc: or1k This selects the available toolchain paths. Add the base directory for @@ -362,6 +362,10 @@ nios2: http://sourcery.mentor.com/public/gnu_toolchain/nios2-linux-gnu/ sh: http://sourcery.mentor.com/public/gnu_toolchain/sh-linux-gnu/ renesas-4.4-200-sh-linux-gnu-i686-pc-linux-gnu.tar.bz2 +Note openrisc kernel.org toolchain is out of date, download latest one from +http://opencores.org/or1k/OpenRISC_GNU_tool_chain#Prebuilt_versions, eg: +ftp://ocuser:ocuser@openrisc.opencores.org/toolchain/gcc-or1k-elf-4.8.1-x86.tar.bz2. + Buildman should now be set up to use your new toolchain. At the time of writing, U-Boot has these architectures: diff --git a/tools/mkimage.c b/tools/mkimage.c index 8f8b6df..facebcd 100644 --- a/tools/mkimage.c +++ b/tools/mkimage.c @@ -129,7 +129,7 @@ int main(int argc, char **argv) case 'a': if (--argc <= 0) usage (); - params.addr = strtoul (*++argv, &ptr, 16); + params.addr = strtoull(*++argv, &ptr, 16); if (*ptr) { fprintf (stderr, "%s: invalid load address %s\n", @@ -146,7 +146,7 @@ int main(int argc, char **argv) case 'e': if (--argc <= 0) usage (); - params.ep = strtoul (*++argv, &ptr, 16); + params.ep = strtoull(*++argv, &ptr, 16); if (*ptr) { fprintf (stderr, "%s: invalid entry point %s\n", diff --git a/tools/moveconfig.py b/tools/moveconfig.py index 1b53f95..6f71b55 100755 --- a/tools/moveconfig.py +++ b/tools/moveconfig.py @@ -184,6 +184,9 @@ SLEEP_TIME=0.03 # nds32: http://osdk.andestech.com/packages/nds32le-linux-glibc-v1.tgz # nios2: https://sourcery.mentor.com/GNUToolchain/subscription42545 # sh: http://sourcery.mentor.com/public/gnu_toolchain/sh-linux-gnu +# +# openrisc kernel.org toolchain is out of date, download latest one from +# http://opencores.org/or1k/OpenRISC_GNU_tool_chain#Prebuilt_versions CROSS_COMPILE = { 'arc': 'arc-linux-', 'aarch64': 'aarch64-linux-', @@ -195,7 +198,7 @@ CROSS_COMPILE = { 'mips': 'mips-linux-', 'nds32': 'nds32le-linux-', 'nios2': 'nios2-linux-gnu-', - 'openrisc': 'or32-linux-', + 'openrisc': 'or1k-elf-', 'powerpc': 'powerpc-linux-', 'sh': 'sh-linux-gnu-', 'sparc': 'sparc-linux-', |