summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/cpu/armv8/fsl-layerscape/soc.c20
-rw-r--r--arch/arm/dts/fsl-ls1043a-qds.dtsi8
-rw-r--r--arch/arm/include/asm/arch-fsl-layerscape/config.h18
-rw-r--r--arch/arm/include/asm/arch-fsl-layerscape/cpu.h1
-rw-r--r--arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h32
-rw-r--r--arch/arm/include/asm/arch-fsl-layerscape/soc.h3
-rw-r--r--arch/arm/include/asm/fsl_secure_boot.h50
-rw-r--r--board/freescale/common/cmd_esbc_validate.c14
-rw-r--r--board/freescale/common/fsl_validate.c66
-rw-r--r--board/freescale/common/vid.c15
-rw-r--r--board/freescale/ls2080a/ls2080a.c6
-rw-r--r--board/freescale/ls2080aqds/MAINTAINERS6
-rw-r--r--board/freescale/ls2080aqds/ls2080aqds.c9
-rw-r--r--board/freescale/ls2080ardb/MAINTAINERS6
-rw-r--r--board/freescale/ls2080ardb/ls2080ardb.c18
-rw-r--r--configs/ls2080aqds_SECURE_BOOT_defconfig20
-rw-r--r--configs/ls2080ardb_SECURE_BOOT_defconfig20
-rw-r--r--configs/ls2085aqds_SECURE_BOOT_defconfig20
-rw-r--r--configs/ls2085ardb_SECURE_BOOT_defconfig20
-rw-r--r--drivers/crypto/fsl/desc_constr.h7
-rw-r--r--drivers/crypto/fsl/jr.c13
-rw-r--r--drivers/crypto/fsl/jr.h3
-rw-r--r--drivers/net/fsl-mc/dpio/qbman_sys.h2
-rw-r--r--drivers/net/fsl-mc/mc.c2
-rw-r--r--include/config_fsl_chain_trust.h25
-rw-r--r--include/configs/ls1043a_common.h8
-rw-r--r--include/configs/ls2080aqds.h2
-rw-r--r--include/configs/ls2080ardb.h18
-rw-r--r--include/fsl_secboot_err.h3
-rw-r--r--include/fsl_sfp.h3
-rw-r--r--include/fsl_validate.h67
31 files changed, 440 insertions, 65 deletions
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
index 213ce3a..a76447e 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
@@ -151,7 +151,14 @@ static void erratum_a009203(void)
#endif
#endif
}
-
+void bypass_smmu(void)
+{
+ u32 val;
+ val = (in_le32(SMMU_SCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK);
+ out_le32(SMMU_SCR0, val);
+ val = (in_le32(SMMU_NSCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK);
+ out_le32(SMMU_NSCR0, val);
+}
void fsl_lsch3_early_init_f(void)
{
erratum_a008751();
@@ -160,6 +167,15 @@ void fsl_lsch3_early_init_f(void)
erratum_a009203();
erratum_a008514();
erratum_a008336();
+#ifdef CONFIG_CHAIN_OF_TRUST
+ /* In case of Secure Boot, the IBR configures the SMMU
+ * to allow only Secure transactions.
+ * SMMU must be reset in bypass mode.
+ * Set the ClientPD bit and Clear the USFCFG Bit
+ */
+ if (fsl_check_boot_mode_secure() == 1)
+ bypass_smmu();
+#endif
}
#ifdef CONFIG_SCSI_AHCI_PLAT
@@ -240,7 +256,7 @@ void fsl_lsch2_early_init_f(void)
init_early_memctl_regs(); /* tighten IFC timing */
#endif
-#ifdef CONFIG_FSL_QSPI
+#if defined(CONFIG_FSL_QSPI) && !defined(CONFIG_QSPI_BOOT)
out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL);
#endif
/* Make SEC reads and writes snoopable */
diff --git a/arch/arm/dts/fsl-ls1043a-qds.dtsi b/arch/arm/dts/fsl-ls1043a-qds.dtsi
index 66efe67..2e9f1f9 100644
--- a/arch/arm/dts/fsl-ls1043a-qds.dtsi
+++ b/arch/arm/dts/fsl-ls1043a-qds.dtsi
@@ -28,8 +28,10 @@
#address-cells = <1>;
#size-cells = <1>;
compatible = "spi-flash";
- reg = <0>;
spi-max-frequency = <1000000>; /* input clock */
+ spi-cpol;
+ spi-cpha;
+ reg = <0>;
};
dflash1: sst25wf040b {
@@ -37,6 +39,8 @@
#size-cells = <1>;
compatible = "spi-flash";
spi-max-frequency = <3500000>;
+ spi-cpol;
+ spi-cpha;
reg = <1>;
};
@@ -45,6 +49,8 @@
#size-cells = <1>;
compatible = "spi-flash";
spi-max-frequency = <3500000>;
+ spi-cpol;
+ spi-cpha;
reg = <2>;
};
};
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h
index bfaece2..ceefe43 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/config.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h
@@ -67,6 +67,24 @@
/* SMMU Defintions */
#define SMMU_BASE 0x05000000 /* GR0 Base */
+/* SFP */
+#define CONFIG_SYS_FSL_SFP_VER_3_4
+#define CONFIG_SYS_FSL_SFP_LE
+#define CONFIG_SYS_FSL_SRK_LE
+
+/* SEC */
+#define CONFIG_SYS_FSL_SEC_LE
+#define CONFIG_SYS_FSL_SEC_COMPAT 5
+
+/* Security Monitor */
+#define CONFIG_SYS_FSL_SEC_MON_LE
+
+/* Secure Boot */
+#define CONFIG_ESBC_HDR_LS
+
+/* DCFG - GUR */
+#define CONFIG_SYS_FSL_CCSR_GUR_LE
+
/* Cache Coherent Interconnect */
#define CCI_MN_BASE 0x04000000
#define CCI_MN_RNF_NODEID_LIST 0x180
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h
index 93bbda3..f75faa6 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h
@@ -12,6 +12,7 @@ static struct cpu_type cpu_type_list[] = {
CPU_TYPE_ENTRY(LS2085, LS2085, 8),
CPU_TYPE_ENTRY(LS2045, LS2045, 4),
CPU_TYPE_ENTRY(LS1043, LS1043, 4),
+ CPU_TYPE_ENTRY(LS1023, LS1023, 2),
CPU_TYPE_ENTRY(LS2040, LS2040, 4),
};
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
index 081519a..1d3b336 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
@@ -73,6 +73,32 @@
#define AHCI_BASE_ADDR1 (CONFIG_SYS_IMMR + 0x02200000)
#define AHCI_BASE_ADDR2 (CONFIG_SYS_IMMR + 0x02210000)
+/* SFP */
+#define CONFIG_SYS_SFP_ADDR (CONFIG_SYS_IMMR + 0x00e80200)
+
+/* SEC */
+#define CONFIG_SYS_FSL_SEC_ADDR (CONFIG_SYS_IMMR + 0x07000000)
+#define CONFIG_SYS_FSL_JR0_ADDR (CONFIG_SYS_IMMR + 0x07010000)
+
+/* Security Monitor */
+#define CONFIG_SYS_SEC_MON_ADDR (CONFIG_SYS_IMMR + 0x00e90000)
+
+/* MMU 500 */
+#define SMMU_SCR0 (SMMU_BASE + 0x0)
+#define SMMU_SCR1 (SMMU_BASE + 0x4)
+#define SMMU_SCR2 (SMMU_BASE + 0x8)
+#define SMMU_SACR (SMMU_BASE + 0x10)
+#define SMMU_IDR0 (SMMU_BASE + 0x20)
+#define SMMU_IDR1 (SMMU_BASE + 0x24)
+
+#define SMMU_NSCR0 (SMMU_BASE + 0x400)
+#define SMMU_NSCR2 (SMMU_BASE + 0x408)
+#define SMMU_NSACR (SMMU_BASE + 0x410)
+
+#define SCR0_CLIENTPD_MASK 0x00000001
+#define SCR0_USFCFG_MASK 0x00000400
+
+
/* PCIe */
#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_IMMR + 0x2400000)
#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_IMMR + 0x2500000)
@@ -154,6 +180,10 @@ struct ccsr_gur {
u8 res_008[0x20-0x8];
u32 gpporcr1; /* General-purpose POR configuration */
u32 gpporcr2; /* General-purpose POR configuration 2 */
+#define FSL_CHASSIS3_DCFG_FUSESR_VID_SHIFT 25
+#define FSL_CHASSIS3_DCFG_FUSESR_VID_MASK 0x1F
+#define FSL_CHASSIS3_DCFG_FUSESR_ALTVID_SHIFT 20
+#define FSL_CHASSIS3_DCFG_FUSESR_ALTVID_MASK 0x1F
u32 dcfg_fusesr; /* Fuse status register */
u32 gpporcr3;
u32 gpporcr4;
@@ -209,6 +239,8 @@ struct ccsr_gur {
#define FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT 16
#define FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_MASK 0xFF000000
#define FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_SHIFT 24
+#define RCW_SB_EN_REG_INDEX 9
+#define RCW_SB_EN_MASK 0x00000400
u8 res_180[0x200-0x180];
u32 scratchrw[32]; /* Scratch Read/Write */
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/soc.h b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
index ea78e15..56989e1 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/soc.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
@@ -41,7 +41,8 @@ struct cpu_type {
{ .name = #n, .soc_ver = SVR_##v, .num_cores = (nc)}
#define SVR_WO_E 0xFFFFFE
-#define SVR_LS1043 0x879204
+#define SVR_LS1043 0x879200
+#define SVR_LS1023 0x879208
#define SVR_LS2045 0x870120
#define SVR_LS2080 0x870110
#define SVR_LS2085 0x870100
diff --git a/arch/arm/include/asm/fsl_secure_boot.h b/arch/arm/include/asm/fsl_secure_boot.h
index a32a1d7..d576f2e 100644
--- a/arch/arm/include/asm/fsl_secure_boot.h
+++ b/arch/arm/include/asm/fsl_secure_boot.h
@@ -18,7 +18,9 @@
#ifdef CONFIG_CHAIN_OF_TRUST
#define CONFIG_CMD_ESBC_VALIDATE
#define CONFIG_CMD_BLOB
+#define CONFIG_CMD_HASH
#define CONFIG_FSL_SEC_MON
+#define CONFIG_SHA_HW_ACCEL
#define CONFIG_SHA_PROG_HW_ACCEL
#define CONFIG_RSA_FREESCALE_EXP
@@ -35,21 +37,61 @@
* The feature is only applicable in case of NOR boot and is
* not applicable in case of RAMBOOT (NAND, SD, SPI).
*/
+#ifndef CONFIG_ESBC_HDR_LS
+/* Current Key EXT feature not available in LS ESBC Header */
#define CONFIG_FSL_ISBC_KEY_EXT
#endif
-#ifdef CONFIG_LS1043A
-/* For LS1043 (ARMv8), ESBC image Address in Header is 64 bit */
+#endif
+
+#if defined(CONFIG_LS1043A) || defined(CONFIG_LS2080A) ||\
+ defined(CONFIG_LS2085A)
+/* For LS1043 (ARMv8), ESBC image Address in Header is 64 bit
+ * Similiarly for LS2080 and LS2085
+ */
#define CONFIG_ESBC_ADDR_64BIT
#endif
+#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
+#define CONFIG_EXTRA_ENV \
+ "setenv fdt_high 0xa0000000;" \
+ "setenv initrd_high 0xcfffffff;" \
+ "setenv hwconfig \'fsl_ddr:ctlr_intlv=null,bank_intlv=null\';"
+#else
#define CONFIG_EXTRA_ENV \
"setenv fdt_high 0xcfffffff;" \
"setenv initrd_high 0xcfffffff;" \
"setenv hwconfig \'fsl_ddr:ctlr_intlv=null,bank_intlv=null\';"
+#endif
-/* The address needs to be modified according to NOR memory map */
-#define CONFIG_BOOTSCRIPT_HDR_ADDR 0x600a0000
+/* Copying Bootscript and Header to DDR from NOR for LS2 and for rest, from
+ * Non-XIP Memory (Nand/SD)*/
+#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_LS2080A) ||\
+ defined(CONFIG_LS2085A)
+#define CONFIG_BOOTSCRIPT_COPY_RAM
+#endif
+/* The address needs to be modified according to NOR and DDR memory map */
+#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
+#define CONFIG_BS_HDR_ADDR_FLASH 0x583920000
+#define CONFIG_BS_ADDR_FLASH 0x583900000
+#define CONFIG_BS_HDR_ADDR_RAM 0xa3920000
+#define CONFIG_BS_ADDR_RAM 0xa3900000
+#else
+#define CONFIG_BS_HDR_ADDR_FLASH 0x600a0000
+#define CONFIG_BS_ADDR_FLASH 0x60060000
+#define CONFIG_BS_HDR_ADDR_RAM 0xa0060000
+#define CONFIG_BS_ADDR_RAM 0xa0060000
+#endif
+
+#ifdef CONFIG_BOOTSCRIPT_COPY_RAM
+#define CONFIG_BOOTSCRIPT_HDR_ADDR CONFIG_BS_HDR_ADDR_RAM
+#define CONFIG_BS_HDR_SIZE 0x00002000
+#define CONFIG_BOOTSCRIPT_ADDR CONFIG_BS_ADDR_RAM
+#define CONFIG_BS_SIZE 0x00001000
+#else
+#define CONFIG_BOOTSCRIPT_HDR_ADDR CONFIG_BS_HDR_ADDR_FLASH
+/* BS_HDR_SIZE, BOOTSCRIPT_ADDR and BS_SIZE are not required */
+#endif
#include <config_fsl_chain_trust.h>
#endif /* #ifdef CONFIG_CHAIN_OF_TRUST */
diff --git a/board/freescale/common/cmd_esbc_validate.c b/board/freescale/common/cmd_esbc_validate.c
index dfa3e21..cefe3cc 100644
--- a/board/freescale/common/cmd_esbc_validate.c
+++ b/board/freescale/common/cmd_esbc_validate.c
@@ -8,7 +8,7 @@
#include <command.h>
#include <fsl_validate.h>
-static int do_esbc_halt(cmd_tbl_t *cmdtp, int flag, int argc,
+int do_esbc_halt(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[])
{
if (fsl_check_boot_mode_secure() == 0) {
@@ -29,6 +29,8 @@ static int do_esbc_validate(cmd_tbl_t *cmdtp, int flag, int argc,
char *hash_str = NULL;
uintptr_t haddr;
int ret;
+ uintptr_t img_addr = 0;
+ char buf[20];
if (argc < 2)
return cmd_usage(cmdtp);
@@ -43,7 +45,15 @@ static int do_esbc_validate(cmd_tbl_t *cmdtp, int flag, int argc,
* part of header. So, the function is called
* by passing this argument as 0.
*/
- ret = fsl_secboot_validate(haddr, hash_str, 0);
+ ret = fsl_secboot_validate(haddr, hash_str, &img_addr);
+
+ /* Need to set "img_addr" even if validation failure.
+ * Required when SB_EN in RCW set and non-fatal error
+ * to continue U-Boot
+ */
+ sprintf(buf, "%lx", img_addr);
+ setenv("img_addr", buf);
+
if (ret)
return 1;
diff --git a/board/freescale/common/fsl_validate.c b/board/freescale/common/fsl_validate.c
index 8fd6dd6..64e4e30 100644
--- a/board/freescale/common/fsl_validate.c
+++ b/board/freescale/common/fsl_validate.c
@@ -35,7 +35,13 @@ static const u8 hash_identifier[] = { 0x30, 0x31, 0x30, 0x0d, 0x06, 0x09, 0x60,
};
static u8 hash_val[SHA256_BYTES];
+
+#ifdef CONFIG_ESBC_HDR_LS
+/* New Barker Code for LS ESBC Header */
+static const u8 barker_code[ESBC_BARKER_LEN] = { 0x12, 0x19, 0x20, 0x01 };
+#else
static const u8 barker_code[ESBC_BARKER_LEN] = { 0x68, 0x39, 0x27, 0x81 };
+#endif
void branch_to_self(void) __attribute__ ((noreturn));
@@ -157,10 +163,15 @@ static int get_ie_info_addr(u32 *ie_addr)
/* This function checks srk_table_flag in header and set/reset srk_flag.*/
static u32 check_srk(struct fsl_secboot_img_priv *img)
{
+#ifdef CONFIG_ESBC_HDR_LS
+ /* In LS, No SRK Flag as SRK is always present*/
+ return 1;
+#else
if (img->hdr.len_kr.srk_table_flag & SRK_FLAG)
return 1;
return 0;
+#endif
}
/* This function returns ospr's key_revoc values.*/
@@ -223,6 +234,7 @@ static u32 read_validate_srk_tbl(struct fsl_secboot_img_priv *img)
}
#endif
+#ifndef CONFIG_ESBC_HDR_LS
static u32 read_validate_single_key(struct fsl_secboot_img_priv *img)
{
struct fsl_secboot_img_hdr *hdr = &img->hdr;
@@ -238,6 +250,7 @@ static u32 read_validate_single_key(struct fsl_secboot_img_priv *img)
return 0;
}
+#endif /* CONFIG_ESBC_HDR_LS */
#if defined(CONFIG_FSL_ISBC_KEY_EXT)
static u32 read_validate_ie_tbl(struct fsl_secboot_img_priv *img)
@@ -312,6 +325,8 @@ static void fsl_secboot_header_verification_failure(void)
printf("Generating reset request\n");
do_reset(NULL, 0, 0, NULL);
+ /* If reset doesn't coocur, halt execution */
+ do_esbc_halt(NULL, 0, 0, NULL);
}
/*
@@ -342,6 +357,9 @@ static void fsl_secboot_image_verification_failure(void)
printf("Generating reset request\n");
do_reset(NULL, 0, 0, NULL);
+ /* If reset doesn't coocur, halt execution */
+ do_esbc_halt(NULL, 0, 0, NULL);
+
} else {
change_sec_mon_state(HPSR_SSM_ST_TRUST,
HPSR_SSM_ST_NON_SECURE);
@@ -388,6 +406,7 @@ void fsl_secboot_handle_error(int error)
case ERROR_ESBC_CLIENT_HEADER_SIG_KEY_MOD:
case ERROR_ESBC_CLIENT_HEADER_SG_ESBC_EP:
case ERROR_ESBC_CLIENT_HEADER_SG_ENTIRES_BAD:
+ case ERROR_KEY_TABLE_NOT_FOUND:
#ifdef CONFIG_KEY_REVOCATION
case ERROR_ESBC_CLIENT_HEADER_KEY_REVOKED:
case ERROR_ESBC_CLIENT_HEADER_INVALID_SRK_NUM_ENTRY:
@@ -536,15 +555,22 @@ static int calc_esbchdr_esbc_hash(struct fsl_secboot_img_priv *img)
if (!key_hash && check_ie(img))
key_hash = 1;
#endif
- if (!key_hash)
+#ifndef CONFIG_ESBC_HDR_LS
+/* No single key support in LS ESBC header */
+ if (!key_hash) {
ret = algo->hash_update(algo, ctx,
img->img_key, img->hdr.key_len, 0);
+ key_hash = 1;
+ }
+#endif
if (ret)
return ret;
+ if (!key_hash)
+ return ERROR_KEY_TABLE_NOT_FOUND;
/* Update hash for actual Image */
ret = algo->hash_update(algo, ctx,
- (u8 *)img->img_addr, img->img_size, 1);
+ (u8 *)(*(img->img_addr_ptr)), img->img_size, 1);
if (ret)
return ret;
@@ -620,14 +646,11 @@ static void construct_img_encoded_hash_second(struct fsl_secboot_img_priv *img)
*/
static int read_validate_esbc_client_header(struct fsl_secboot_img_priv *img)
{
- char buf[20];
struct fsl_secboot_img_hdr *hdr = &img->hdr;
void *esbc = (u8 *)(uintptr_t)img->ehdrloc;
u8 *k, *s;
u32 ret = 0;
-#ifdef CONFIG_KEY_REVOCATION
-#endif
int key_found = 0;
/* check barker code */
@@ -637,17 +660,14 @@ static int read_validate_esbc_client_header(struct fsl_secboot_img_priv *img)
/* If Image Address is not passed as argument to function,
* then Address and Size must be read from the Header.
*/
- if (img->img_addr == 0) {
+ if (*(img->img_addr_ptr) == 0) {
#ifdef CONFIG_ESBC_ADDR_64BIT
- img->img_addr = hdr->pimg64;
+ *(img->img_addr_ptr) = hdr->pimg64;
#else
- img->img_addr = hdr->pimg;
+ *(img->img_addr_ptr) = hdr->pimg;
#endif
}
- sprintf(buf, "%lx", img->img_addr);
- setenv("img_addr", buf);
-
if (!hdr->img_size)
return ERROR_ESBC_CLIENT_HEADER_IMG_SIZE;
@@ -671,13 +691,17 @@ static int read_validate_esbc_client_header(struct fsl_secboot_img_priv *img)
key_found = 1;
}
#endif
-
+#ifndef CONFIG_ESBC_HDR_LS
+/* Single Key Feature not available in LS ESBC Header */
if (key_found == 0) {
ret = read_validate_single_key(img);
if (ret != 0)
return ret;
key_found = 1;
}
+#endif
+ if (!key_found)
+ return ERROR_KEY_TABLE_NOT_FOUND;
/* check signaure */
if (get_key_len(img) == 2 * hdr->sign_len) {
@@ -691,10 +715,12 @@ static int read_validate_esbc_client_header(struct fsl_secboot_img_priv *img)
}
memcpy(&img->img_sign, esbc + hdr->psign, hdr->sign_len);
-
+/* No SG support in LS-CH3 */
+#ifndef CONFIG_ESBC_HDR_LS
/* No SG support */
if (hdr->sg_flag)
return ERROR_ESBC_CLIENT_HEADER_SG;
+#endif
/* modulus most significant bit should be set */
k = (u8 *)&img->img_key;
@@ -784,9 +810,17 @@ static int calculate_cmp_img_sig(struct fsl_secboot_img_priv *img)
return 0;
}
-
+/* haddr - Address of the header of image to be validated.
+ * arg_hash_str - Option hash string. If provided, this
+ * overides the key hash in the SFP fuses.
+ * img_addr_ptr - Optional pointer to address of image to be validated.
+ * If non zero addr, this overides the addr of image in header,
+ * otherwise updated to image addr in header.
+ * Acts as both input and output of function.
+ * This pointer shouldn't be NULL.
+ */
int fsl_secboot_validate(uintptr_t haddr, char *arg_hash_str,
- uintptr_t img_addr)
+ uintptr_t *img_addr_ptr)
{
struct ccsr_sfp_regs *sfp_regs = (void *)(CONFIG_SYS_SFP_ADDR);
ulong hash[SHA256_BYTES/sizeof(ulong)];
@@ -839,7 +873,7 @@ int fsl_secboot_validate(uintptr_t haddr, char *arg_hash_str,
/* Update the information in Private Struct */
hdr = &img->hdr;
img->ehdrloc = haddr;
- img->img_addr = img_addr;
+ img->img_addr_ptr = img_addr_ptr;
esbc = (u8 *)img->ehdrloc;
memcpy(hdr, esbc, sizeof(struct fsl_secboot_img_hdr));
diff --git a/board/freescale/common/vid.c b/board/freescale/common/vid.c
index a6a132a..2f29795 100644
--- a/board/freescale/common/vid.c
+++ b/board/freescale/common/vid.c
@@ -10,6 +10,8 @@
#include <asm/io.h>
#ifdef CONFIG_LS1043A
#include <asm/arch/immap_lsch2.h>
+#elif defined(CONFIG_FSL_LSCH3)
+#include <asm/arch/immap_lsch3.h>
#else
#include <asm/immap_85xx.h>
#endif
@@ -285,7 +287,7 @@ static int set_voltage(int i2caddress, int vdd)
int adjust_vdd(ulong vdd_override)
{
int re_enable = disable_interrupts();
-#ifdef CONFIG_LS1043A
+#if defined(CONFIG_LS1043A) || defined(CONFIG_FSL_LSCH3)
struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
#else
ccsr_gur_t __iomem *gur =
@@ -362,7 +364,11 @@ int adjust_vdd(ulong vdd_override)
}
/* get the voltage ID from fuse status register */
+#ifdef CONFIG_FSL_LSCH3
+ fusesr = in_le32(&gur->dcfg_fusesr);
+#else
fusesr = in_be32(&gur->dcfg_fusesr);
+#endif
/*
* VID is used according to the table below
* ---------------------------------------
@@ -387,6 +393,13 @@ int adjust_vdd(ulong vdd_override)
vid = (fusesr >> FSL_CHASSIS2_DCFG_FUSESR_VID_SHIFT) &
FSL_CHASSIS2_DCFG_FUSESR_VID_MASK;
}
+#elif defined(CONFIG_FSL_LSCH3)
+ vid = (fusesr >> FSL_CHASSIS3_DCFG_FUSESR_ALTVID_SHIFT) &
+ FSL_CHASSIS3_DCFG_FUSESR_ALTVID_MASK;
+ if ((vid == 0) || (vid == FSL_CHASSIS3_DCFG_FUSESR_ALTVID_MASK)) {
+ vid = (fusesr >> FSL_CHASSIS3_DCFG_FUSESR_VID_SHIFT) &
+ FSL_CHASSIS3_DCFG_FUSESR_VID_MASK;
+ }
#else
vid = (fusesr >> FSL_CORENET_DCFG_FUSESR_ALTVID_SHIFT) &
FSL_CORENET_DCFG_FUSESR_ALTVID_MASK;
diff --git a/board/freescale/ls2080a/ls2080a.c b/board/freescale/ls2080a/ls2080a.c
index 7bce8b0..ace0d79 100644
--- a/board/freescale/ls2080a/ls2080a.c
+++ b/board/freescale/ls2080a/ls2080a.c
@@ -87,14 +87,14 @@ void fdt_fixup_board_enet(void *fdt)
{
int offset;
- offset = fdt_path_offset(fdt, "/fsl-mc");
+ offset = fdt_path_offset(fdt, "/soc/fsl-mc");
/*
* TODO: Remove this when backward compatibility
- * with old DT node (fsl,dprc@0) is no longer needed.
+ * with old DT node (/fsl-mc) is no longer needed.
*/
if (offset < 0)
- offset = fdt_path_offset(fdt, "/fsl,dprc@0");
+ offset = fdt_path_offset(fdt, "/fsl-mc");
if (offset < 0) {
printf("%s: ERROR: fsl-mc node not found in device tree (error %d)\n",
diff --git a/board/freescale/ls2080aqds/MAINTAINERS b/board/freescale/ls2080aqds/MAINTAINERS
index 6f99ad0..558cef1 100644
--- a/board/freescale/ls2080aqds/MAINTAINERS
+++ b/board/freescale/ls2080aqds/MAINTAINERS
@@ -8,3 +8,9 @@ F: configs/ls2080aqds_defconfig
F: configs/ls2080aqds_nand_defconfig
F: configs/ls2085aqds_defconfig
F: configs/ls2085aqds_nand_defconfig
+
+LS2080A_SECURE_BOOT BOARD
+M: Saksham Jain <saksham.jain@nxp.freescale.com>
+S: Maintained
+F: configs/ls2080aqds_SECURE_BOOT_defconfig
+F: configs/ls2085aqds_SECURE_BOOT_defconfig
diff --git a/board/freescale/ls2080aqds/ls2080aqds.c b/board/freescale/ls2080aqds/ls2080aqds.c
index aa256a2..e1a521d 100644
--- a/board/freescale/ls2080aqds/ls2080aqds.c
+++ b/board/freescale/ls2080aqds/ls2080aqds.c
@@ -19,6 +19,7 @@
#include <rtc.h>
#include <asm/arch/soc.h>
#include <hwconfig.h>
+#include <fsl_sec.h>
#include "../common/qixis.h"
#include "ls2080aqds_qixis.h"
@@ -248,7 +249,9 @@ int arch_misc_init(void)
#ifdef CONFIG_FSL_DEBUG_SERVER
debug_server_init();
#endif
-
+#ifdef CONFIG_FSL_CAAM
+ sec_init();
+#endif
return 0;
}
#endif
@@ -258,10 +261,10 @@ void fdt_fixup_board_enet(void *fdt)
{
int offset;
- offset = fdt_path_offset(fdt, "/fsl-mc");
+ offset = fdt_path_offset(fdt, "/soc/fsl-mc");
if (offset < 0)
- offset = fdt_path_offset(fdt, "/fsl,dprc@0");
+ offset = fdt_path_offset(fdt, "/fsl-mc");
if (offset < 0) {
printf("%s: ERROR: fsl-mc node not found in device tree (error %d)\n",
diff --git a/board/freescale/ls2080ardb/MAINTAINERS b/board/freescale/ls2080ardb/MAINTAINERS
index c9f3459..0817711d 100644
--- a/board/freescale/ls2080ardb/MAINTAINERS
+++ b/board/freescale/ls2080ardb/MAINTAINERS
@@ -8,3 +8,9 @@ F: configs/ls2080ardb_defconfig
F: configs/ls2080ardb_nand_defconfig
F: configs/ls2085ardb_defconfig
F: configs/ls2085ardb_nand_defconfig
+
+LS2080A_SECURE_BOOT BOARD
+M: Saksham Jain <saksham.jain@nxp.freescale.com>
+S: Maintained
+F: configs/ls2080ardb_SECURE_BOOT_defconfig
+F: configs/ls2085ardb_SECURE_BOOT_defconfig
diff --git a/board/freescale/ls2080ardb/ls2080ardb.c b/board/freescale/ls2080ardb/ls2080ardb.c
index 12638df..8201048 100644
--- a/board/freescale/ls2080ardb/ls2080ardb.c
+++ b/board/freescale/ls2080ardb/ls2080ardb.c
@@ -18,9 +18,11 @@
#include <environment.h>
#include <i2c.h>
#include <asm/arch/soc.h>
+#include <fsl_sec.h>
#include "../common/qixis.h"
#include "ls2080ardb_qixis.h"
+#include "../common/vid.h"
#define PIN_MUX_SEL_SDHC 0x00
#define PIN_MUX_SEL_DSPI 0x0a
@@ -122,6 +124,11 @@ int select_i2c_ch_pca9547(u8 ch)
return 0;
}
+int i2c_multiplexer_select_vid_channel(u8 channel)
+{
+ return select_i2c_ch_pca9547(channel);
+}
+
int config_board_mux(int ctrl_type)
{
u8 reg5;
@@ -188,6 +195,9 @@ int misc_init_r(void)
if (hwconfig("sdhc"))
config_board_mux(MUX_TYPE_SDHC);
+ if (adjust_vdd(0))
+ printf("Warning: Adjusting core voltage failed.\n");
+
return 0;
}
@@ -218,7 +228,9 @@ int arch_misc_init(void)
#ifdef CONFIG_FSL_DEBUG_SERVER
debug_server_init();
#endif
-
+#ifdef CONFIG_FSL_CAAM
+ sec_init();
+#endif
return 0;
}
#endif
@@ -228,10 +240,10 @@ void fdt_fixup_board_enet(void *fdt)
{
int offset;
- offset = fdt_path_offset(fdt, "/fsl-mc");
+ offset = fdt_path_offset(fdt, "/soc/fsl-mc");
if (offset < 0)
- offset = fdt_path_offset(fdt, "/fsl,dprc@0");
+ offset = fdt_path_offset(fdt, "/fsl-mc");
if (offset < 0) {
printf("%s: ERROR: fsl-mc node not found in device tree (error %d)\n",
diff --git a/configs/ls2080aqds_SECURE_BOOT_defconfig b/configs/ls2080aqds_SECURE_BOOT_defconfig
new file mode 100644
index 0000000..408d1ee
--- /dev/null
+++ b/configs/ls2080aqds_SECURE_BOOT_defconfig
@@ -0,0 +1,20 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS2080AQDS=y
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_DM_SPI=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-qds"
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, LS2080A, SECURE_BOOT"
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_OF_CONTROL=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+CONFIG_NETDEVICES=y
+CONFIG_E1000=y
+CONFIG_SYS_NS16550=y
+CONFIG_FSL_DSPI=y
+CONFIG_RSA=y
diff --git a/configs/ls2080ardb_SECURE_BOOT_defconfig b/configs/ls2080ardb_SECURE_BOOT_defconfig
new file mode 100644
index 0000000..dde3311
--- /dev/null
+++ b/configs/ls2080ardb_SECURE_BOOT_defconfig
@@ -0,0 +1,20 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS2080ARDB=y
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_DM_SPI=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-rdb"
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, LS2080A, SECURE_BOOT"
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_OF_CONTROL=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+CONFIG_NETDEVICES=y
+CONFIG_E1000=y
+CONFIG_SYS_NS16550=y
+CONFIG_FSL_DSPI=y
+CONFIG_RSA=y
diff --git a/configs/ls2085aqds_SECURE_BOOT_defconfig b/configs/ls2085aqds_SECURE_BOOT_defconfig
new file mode 100644
index 0000000..f13ee41
--- /dev/null
+++ b/configs/ls2085aqds_SECURE_BOOT_defconfig
@@ -0,0 +1,20 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS2080AQDS=y
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_DM_SPI=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-qds"
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, LS2085A, SECURE_BOOT"
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_OF_CONTROL=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+CONFIG_NETDEVICES=y
+CONFIG_E1000=y
+CONFIG_SYS_NS16550=y
+CONFIG_FSL_DSPI=y
+CONFIG_RSA=y
diff --git a/configs/ls2085ardb_SECURE_BOOT_defconfig b/configs/ls2085ardb_SECURE_BOOT_defconfig
new file mode 100644
index 0000000..aa66508
--- /dev/null
+++ b/configs/ls2085ardb_SECURE_BOOT_defconfig
@@ -0,0 +1,20 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS2080ARDB=y
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_DM_SPI=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-rdb"
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, LS2085A, SECURE_BOOT"
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_OF_CONTROL=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+CONFIG_NETDEVICES=y
+CONFIG_E1000=y
+CONFIG_SYS_NS16550=y
+CONFIG_FSL_DSPI=y
+CONFIG_RSA=y
diff --git a/drivers/crypto/fsl/desc_constr.h b/drivers/crypto/fsl/desc_constr.h
index 4ea93b0..7dad753 100644
--- a/drivers/crypto/fsl/desc_constr.h
+++ b/drivers/crypto/fsl/desc_constr.h
@@ -112,10 +112,9 @@ static inline void append_ptr(u32 *desc, dma_addr_t ptr)
#ifdef CONFIG_PHYS_64BIT
/* The Position of low and high part of 64 bit address
* will depend on the endianness of CAAM Block */
- union ptr_addr_t ptr_addr;
- ptr_addr.m_halfs.high = (u32)(ptr >> 32);
- ptr_addr.m_halfs.low = (u32)ptr;
- *offset = ptr_addr.m_whole;
+ union ptr_addr_t *ptr_addr = (union ptr_addr_t *)offset;
+ ptr_addr->m_halfs.high = (u32)(ptr >> 32);
+ ptr_addr->m_halfs.low = (u32)ptr;
#else
*offset = ptr;
#endif
diff --git a/drivers/crypto/fsl/jr.c b/drivers/crypto/fsl/jr.c
index 93c2471..3fc418a 100644
--- a/drivers/crypto/fsl/jr.c
+++ b/drivers/crypto/fsl/jr.c
@@ -543,7 +543,20 @@ int sec_init(void)
uint32_t liodn_s;
#endif
+ /*
+ * Modifying CAAM Read/Write Attributes
+ * For LS2080A and LS2085A
+ * For AXI Write - Cacheable, Write Back, Write allocate
+ * For AXI Read - Cacheable, Read allocate
+ * Only For LS2080a and LS2085a, to solve CAAM coherency issues
+ */
+#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
+ mcr = (mcr & ~MCFGR_AWCACHE_MASK) | (0xb << MCFGR_AWCACHE_SHIFT);
+ mcr = (mcr & ~MCFGR_ARCACHE_MASK) | (0x6 << MCFGR_ARCACHE_SHIFT);
+#else
mcr = (mcr & ~MCFGR_AWCACHE_MASK) | (0x2 << MCFGR_AWCACHE_SHIFT);
+#endif
+
#ifdef CONFIG_PHYS_64BIT
mcr |= (1 << MCFGR_PS_SHIFT);
#endif
diff --git a/drivers/crypto/fsl/jr.h b/drivers/crypto/fsl/jr.h
index 545d964..1642dbb 100644
--- a/drivers/crypto/fsl/jr.h
+++ b/drivers/crypto/fsl/jr.h
@@ -23,6 +23,9 @@
#define MCFGR_PS_SHIFT 16
#define MCFGR_AWCACHE_SHIFT 8
#define MCFGR_AWCACHE_MASK (0xf << MCFGR_AWCACHE_SHIFT)
+#define MCFGR_ARCACHE_SHIFT 12
+#define MCFGR_ARCACHE_MASK (0xf << MCFGR_ARCACHE_SHIFT)
+
#define JR_INTMASK 0x00000001
#define JRCR_RESET 0x01
#define JRINT_ERR_HALT_INPROGRESS 0x4
diff --git a/drivers/net/fsl-mc/dpio/qbman_sys.h b/drivers/net/fsl-mc/dpio/qbman_sys.h
index 235d641..7a537fb 100644
--- a/drivers/net/fsl-mc/dpio/qbman_sys.h
+++ b/drivers/net/fsl-mc/dpio/qbman_sys.h
@@ -255,11 +255,11 @@ static inline int qbman_swp_sys_init(struct qbman_swp_sys *s,
s->addr_cena = d->cena_bar;
s->addr_cinh = d->cinh_bar;
s->cena = (void *)valloc(CONFIG_SYS_PAGE_SIZE);
- memset((void *)s->cena, 0x00, CONFIG_SYS_PAGE_SIZE);
if (!s->cena) {
printf("Could not allocate page for cena shadow\n");
return -1;
}
+ memset((void *)s->cena, 0x00, CONFIG_SYS_PAGE_SIZE);
#ifdef QBMAN_CHECKING
/* We should never be asked to initialise for a portal that isn't in
diff --git a/drivers/net/fsl-mc/mc.c b/drivers/net/fsl-mc/mc.c
index f83bd0c..d2b8b5c 100644
--- a/drivers/net/fsl-mc/mc.c
+++ b/drivers/net/fsl-mc/mc.c
@@ -747,11 +747,11 @@ static int dpio_init(void)
err_get_swp_init:
dpio_disable(dflt_mc_io, MC_CMD_NO_FLAGS, dflt_dpio->dpio_handle);
err_get_enable:
- free(dflt_dpio);
err_get_attr:
dpio_close(dflt_mc_io, MC_CMD_NO_FLAGS, dflt_dpio->dpio_handle);
dpio_destroy(dflt_mc_io, MC_CMD_NO_FLAGS, dflt_dpio->dpio_handle);
err_create:
+ free(dflt_dpio);
err_malloc:
return err;
}
diff --git a/include/config_fsl_chain_trust.h b/include/config_fsl_chain_trust.h
index 45dda56..566fd80 100644
--- a/include/config_fsl_chain_trust.h
+++ b/include/config_fsl_chain_trust.h
@@ -44,11 +44,18 @@
* "41066b564c6ffcef40ccbc1e0a5d0d519604000c785d97bbefd25e4d288d1c8b"
*/
+#ifdef CONFIG_BOOTARGS
+#define CONFIG_SET_BOOTARGS "setenv bootargs \'" CONFIG_BOOTARGS" \';"
+#else
+#define CONFIG_SET_BOOTARGS "setenv bootargs \'root=/dev/ram " \
+ "rw console=ttyS0,115200 ramdisk_size=600000\';"
+#endif
+
+
#ifdef CONFIG_BOOTSCRIPT_KEY_HASH
#define CONFIG_SECBOOT \
"setenv bs_hdraddr " __stringify(CONFIG_BOOTSCRIPT_HDR_ADDR)";" \
- "setenv bootargs \'root=/dev/ram rw console=ttyS0,115200 " \
- "ramdisk_size=600000\';" \
+ CONFIG_SET_BOOTARGS \
CONFIG_EXTRA_ENV \
"esbc_validate $bs_hdraddr " \
__stringify(CONFIG_BOOTSCRIPT_KEY_HASH)";" \
@@ -57,16 +64,13 @@
#else
#define CONFIG_SECBOOT \
"setenv bs_hdraddr " __stringify(CONFIG_BOOTSCRIPT_HDR_ADDR)";" \
- "setenv bootargs \'root=/dev/ram rw console=ttyS0,115200 " \
- "ramdisk_size=600000\';" \
+ CONFIG_SET_BOOTARGS \
CONFIG_EXTRA_ENV \
"esbc_validate $bs_hdraddr;" \
"source $img_addr;" \
"esbc_halt\0"
#endif
-/* For secure boot flow, default environment used will be used */
-#if defined(CONFIG_SYS_RAMBOOT)
#ifdef CONFIG_BOOTSCRIPT_COPY_RAM
#define CONFIG_BS_COPY_ENV \
"setenv bs_hdr_ram " __stringify(CONFIG_BS_HDR_ADDR_RAM)";" \
@@ -76,14 +80,19 @@
"setenv bs_flash " __stringify(CONFIG_BS_ADDR_FLASH)";" \
"setenv bs_size " __stringify(CONFIG_BS_SIZE)";"
+/* For secure boot flow, default environment used will be used */
+#if defined(CONFIG_SYS_RAMBOOT)
#if defined(CONFIG_RAMBOOT_NAND)
#define CONFIG_BS_COPY_CMD \
"nand read $bs_hdr_ram $bs_hdr_flash $bs_hdr_size ;" \
"nand read $bs_ram $bs_flash $bs_size ;"
#endif /* CONFIG_RAMBOOT_NAND */
-#endif /* CONFIG_BOOTSCRIPT_COPY_RAM */
-
+#else
+#define CONFIG_BS_COPY_CMD \
+ "cp.b $bs_hdr_flash $bs_hdr_ram $bs_hdr_size ;" \
+ "cp.b $bs_flash $bs_ram $bs_size ;"
#endif
+#endif /* CONFIG_BOOTSCRIPT_COPY_RAM */
#ifndef CONFIG_BS_COPY_ENV
#define CONFIG_BS_COPY_ENV
diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
index ea25aad..fd243b1 100644
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -245,13 +245,13 @@
"ramdisk_size=0x2000000\0" \
"fdt_high=0xffffffffffffffff\0" \
"initrd_high=0xffffffffffffffff\0" \
- "kernel_start=0x61200000\0" \
- "kernel_load=0x807f0000\0" \
- "kernel_size=0x1000000\0" \
+ "kernel_start=0x61100000\0" \
+ "kernel_load=0xa0000000\0" \
+ "kernel_size=0x2800000\0" \
"console=ttyAMA0,38400n8\0"
#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0 " \
- "earlycon=uart8250,0x21c0500,115200"
+ "earlycon=uart8250,mmio,0x21c0500"
#define CONFIG_BOOTCOMMAND "cp.b $kernel_start $kernel_load " \
"$kernel_size && bootm $kernel_load"
#define CONFIG_BOOTDELAY 10
diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
index dab3820..91fad0a 100644
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@@ -399,4 +399,6 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_USB_STORAGE
#define CONFIG_CMD_EXT2
+#include <asm/fsl_secure_boot.h>
+
#endif /* __LS2_QDS_H */
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index 59a3f66..15a1172 100644
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -14,6 +14,22 @@
#define CONFIG_DISPLAY_BOARDINFO
+#define I2C_MUX_CH_VOL_MONITOR 0xa
+#define I2C_VOL_MONITOR_ADDR 0x38
+#define CONFIG_VOL_MONITOR_IR36021_READ
+#define CONFIG_VOL_MONITOR_IR36021_SET
+
+#define CONFIG_VID_FLS_ENV "ls2080ardb_vdd_mv"
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_VID
+#endif
+/* step the IR regulator in 5mV increments */
+#define IR_VDD_STEP_DOWN 5
+#define IR_VDD_STEP_UP 5
+/* The lowest and highest voltage allowed for LS2080ARDB */
+#define VDD_MV_MIN 819
+#define VDD_MV_MAX 1212
+
#ifndef __ASSEMBLY__
unsigned long get_board_sys_clk(void);
#endif
@@ -363,4 +379,6 @@ unsigned long get_board_sys_clk(void);
#define CONFIG_PHY_AQUANTIA
#endif
+#include <asm/fsl_secure_boot.h>
+
#endif /* __LS2_RDB_H */
diff --git a/include/fsl_secboot_err.h b/include/fsl_secboot_err.h
index afc50a8..95d890b 100644
--- a/include/fsl_secboot_err.h
+++ b/include/fsl_secboot_err.h
@@ -29,6 +29,7 @@
#define ERROR_ESBC_CLIENT_HEADER_INV_IE_ENTRY_KEYLEN 0x18
#define ERROR_IE_TABLE_NOT_FOUND 0x19
#define ERROR_ESBC_CLIENT_HEADER_KEY_LEN_NOT_TWICE_SIG_LEN 0x20
+#define ERROR_KEY_TABLE_NOT_FOUND 0x21
#define ERROR_ESBC_CLIENT_HEADER_KEY_MOD_1 0x40
#define ERROR_ESBC_CLIENT_HEADER_KEY_MOD_2 0x80
#define ERROR_ESBC_CLIENT_HEADER_SIG_KEY_MOD 0x100
@@ -121,6 +122,8 @@ static const struct fsl_secboot_errcode fsl_secboot_errcodes[] = {
"Wrong IE public key len in header" },
{ ERROR_IE_TABLE_NOT_FOUND,
"Information about IE Table missing" },
+ { ERROR_KEY_TABLE_NOT_FOUND,
+ "No Key/ Key Table Found in header"},
{ ERROR_ESBC_CLIENT_MAX, "NULL" }
};
diff --git a/include/fsl_sfp.h b/include/fsl_sfp.h
index 353a123..2976a2c 100644
--- a/include/fsl_sfp.h
+++ b/include/fsl_sfp.h
@@ -32,7 +32,8 @@
/* Number of SRKH registers */
#define NUM_SRKH_REGS 8
-#ifdef CONFIG_SYS_FSL_SFP_VER_3_2
+#if defined(CONFIG_SYS_FSL_SFP_VER_3_2) || \
+ defined(CONFIG_SYS_FSL_SFP_VER_3_4)
struct ccsr_sfp_regs {
u32 ospr; /* 0x200 */
u32 ospr1; /* 0x204 */
diff --git a/include/fsl_validate.h b/include/fsl_validate.h
index 83efcf4..a71e1ce 100644
--- a/include/fsl_validate.h
+++ b/include/fsl_validate.h
@@ -21,14 +21,6 @@
extern struct jobring jr;
-#ifdef CONFIG_KEY_REVOCATION
-/* Srk table and key revocation check */
-#define SRK_FLAG 0x01
-#define UNREVOCABLE_KEY 4
-#define ALIGN_REVOC_KEY 3
-#define MAX_KEY_ENTRIES 4
-#endif
-
/* Barker code size in bytes */
#define ESBC_BARKER_LEN 4 /* barker code length in ESBC uboot client */
/* header */
@@ -39,6 +31,47 @@ extern struct jobring jr;
/* Maximum number of SG entries allowed */
#define MAX_SG_ENTRIES 8
+/* Different Header Struct for LS-CH3 */
+#ifdef CONFIG_ESBC_HDR_LS
+struct fsl_secboot_img_hdr {
+ u8 barker[ESBC_BARKER_LEN]; /* barker code */
+ u32 srk_tbl_off;
+ struct {
+ u8 num_srk;
+ u8 srk_sel;
+ u8 reserve;
+ u8 ie_flag;
+ } len_kr;
+
+ u32 uid_flag;
+
+ u32 psign; /* signature offset */
+ u32 sign_len; /* length of the signature in bytes */
+
+ u64 pimg64; /* 64 bit pointer to ESBC Image */
+ u32 img_size; /* ESBC client image size in bytes */
+ u32 ie_key_sel;
+
+ u32 fsl_uid_0;
+ u32 fsl_uid_1;
+ u32 oem_uid_0;
+ u32 oem_uid_1;
+ u32 oem_uid_2;
+ u32 oem_uid_3;
+ u32 oem_uid_4;
+ u32 reserved1[3];
+};
+
+#ifdef CONFIG_KEY_REVOCATION
+/* Srk table and key revocation check */
+#define UNREVOCABLE_KEY 8
+#define ALIGN_REVOC_KEY 7
+#define MAX_KEY_ENTRIES 8
+#endif
+
+
+#else /* CONFIG_ESBC_HDR_LS */
+
/*
* ESBC uboot client header structure.
* The struct contain the following fields
@@ -109,6 +142,17 @@ struct fsl_secboot_img_hdr {
u32 ie_key_sel;
};
+#ifdef CONFIG_KEY_REVOCATION
+/* Srk table and key revocation check */
+#define SRK_FLAG 0x01
+#define UNREVOCABLE_KEY 4
+#define ALIGN_REVOC_KEY 3
+#define MAX_KEY_ENTRIES 4
+#endif
+
+#endif /* CONFIG_ESBC_HDR_LS */
+
+
#if defined(CONFIG_FSL_ISBC_KEY_EXT)
struct ie_key_table {
u32 key_len;
@@ -194,12 +238,15 @@ struct fsl_secboot_img_priv {
struct fsl_secboot_sg_table sgtbl[MAX_SG_ENTRIES]; /* SG table */
uintptr_t ehdrloc; /* ESBC Header location */
- uintptr_t img_addr; /* ESBC Image Location */
+ uintptr_t *img_addr_ptr; /* ESBC Image Location */
uint32_t img_size; /* ESBC Image Size */
};
+int do_esbc_halt(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[]);
+
int fsl_secboot_validate(uintptr_t haddr, char *arg_hash_str,
- uintptr_t img_loc);
+ uintptr_t *img_addr_ptr);
int fsl_secboot_blob_encap(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[]);
int fsl_secboot_blob_decap(cmd_tbl_t *cmdtp, int flag, int argc,