summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--board/keymile/common/common.c2
-rw-r--r--board/keymile/kmeter1/kmeter1.c33
-rw-r--r--include/configs/keymile-common.h7
-rw-r--r--include/configs/kmeter1.h35
4 files changed, 69 insertions, 8 deletions
diff --git a/board/keymile/common/common.c b/board/keymile/common/common.c
index 1338950..48ce613 100644
--- a/board/keymile/common/common.c
+++ b/board/keymile/common/common.c
@@ -318,7 +318,7 @@ int ivm_read_eeprom (void)
if (buf != NULL)
dev_addr = simple_strtoul ((char *)buf, NULL, 16);
- if (eeprom_read (dev_addr, 0, i2c_buffer, CONFIG_SYS_IVM_EEPROM_MAX_LEN) != 0) {
+ if (i2c_read(dev_addr, 0, 1, i2c_buffer, CONFIG_SYS_IVM_EEPROM_MAX_LEN) != 0) {
printf ("Error reading EEprom\n");
return -2;
}
diff --git a/board/keymile/kmeter1/kmeter1.c b/board/keymile/kmeter1/kmeter1.c
index f04a57a..a3c58ae 100644
--- a/board/keymile/kmeter1/kmeter1.c
+++ b/board/keymile/kmeter1/kmeter1.c
@@ -59,6 +59,23 @@ const qe_iop_conf_t qe_iop_conf_tab[] = {
{0, 0, 0, 0, QE_IOP_TAB_END},
};
+static int board_init_i2c_busses (void)
+{
+ I2C_MUX_DEVICE *dev = NULL;
+ uchar *buf;
+
+ /* Set up the Bus for the DTTs */
+ buf = (unsigned char *) getenv ("dtt_bus");
+ if (buf != NULL)
+ dev = i2c_mux_ident_muxstring (buf);
+ if (dev == NULL) {
+ printf ("Error couldn't add Bus for DTT\n");
+ printf ("please setup dtt_bus to where your\n");
+ printf ("DTT is found.\n");
+ }
+ return 0;
+}
+
int board_early_init_r (void)
{
void *reg = (void *)(CONFIG_SYS_IMMR + 0x14a8);
@@ -80,6 +97,13 @@ int board_early_init_r (void)
return 0;
}
+int misc_init_r (void)
+{
+ /* add board specific i2c busses */
+ board_init_i2c_busses ();
+ return 0;
+}
+
int fixed_sdram(void)
{
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
@@ -156,3 +180,12 @@ void ft_board_setup (void *blob, bd_t *bd)
ft_cpu_setup (blob, bd);
}
#endif
+
+#if defined(CONFIG_HUSH_INIT_VAR)
+extern int ivm_read_eeprom (void);
+int hush_init_var (void)
+{
+ ivm_read_eeprom ();
+ return 0;
+}
+#endif
diff --git a/include/configs/keymile-common.h b/include/configs/keymile-common.h
index d70bc48..c7f6ba3 100644
--- a/include/configs/keymile-common.h
+++ b/include/configs/keymile-common.h
@@ -42,13 +42,9 @@
#define CONFIG_CMD_IMMAP
#define CONFIG_CMD_MII
#define CONFIG_CMD_PING
-
-/* should go away, if kmeter I2C support is enabled */
-#if defined(CONFIG_MGCOGE) || defined(CONFIG_MGSUVD)
#define CONFIG_CMD_DTT
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_I2C
-#endif
#undef CONFIG_WATCHDOG /* disable platform specific watchdog */
@@ -73,10 +69,7 @@
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
-/* should go away, if kmeter I2C support is enabled */
-#if defined(CONFIG_MGCOGE) || defined(CONFIG_MGSUVD)
#define CONFIG_HUSH_INIT_VAR 1
-#endif
#define CONFIG_SYS_ALT_MEMTEST /* memory test, takes time */
#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h
index b86c61d..a23c9ed 100644
--- a/include/configs/kmeter1.h
+++ b/include/configs/kmeter1.h
@@ -32,6 +32,7 @@
/* include common defines/options for all Keymile boards */
#include "keymile-common.h"
+#define CONFIG_MISC_INIT_R 1
/*
* System Clock Setup
*/
@@ -300,6 +301,38 @@
#define CONFIG_ENV_SIZE 0x2000
#endif /* CFG_RAMBOOT */
+/* I2C */
+#define CONFIG_HARD_I2C /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CONFIG_FSL_I2C
+#define CONFIG_SYS_I2C_SPEED 200000 /* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE 0x7F
+#define CONFIG_SYS_I2C_OFFSET 0x3000
+#define CONFIG_I2C_MULTI_BUS 1
+#define CONFIG_I2C_CMD_TREE 1
+#define CONFIG_SYS_MAX_I2C_BUS 2
+#define CONFIG_I2C_MUX 1
+
+/* EEprom support */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
+#define CONFIG_SYS_I2C_MULTI_EEPROMS 1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
+
+/* Support the IVM EEprom */
+#define CONFIG_SYS_IVM_EEPROM_ADR 0x50
+#define CONFIG_SYS_IVM_EEPROM_MAX_LEN 0x400
+#define CONFIG_SYS_IVM_EEPROM_PAGE_LEN 0x100
+
+/* I2C SYSMON (LM75, AD7414 is almost compatible) */
+#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */
+#define CONFIG_DTT_SENSORS {0, 1, 2, 3} /* Sensor addresses */
+#define CONFIG_SYS_DTT_MAX_TEMP 70
+#define CONFIG_SYS_DTT_LOW_TEMP -30
+#define CONFIG_SYS_DTT_HYSTERESIS 3
+#define CONFIG_SYS_DTT_BUS_NUM (2)
+
#if defined(CONFIG_PCI)
#define CONFIG_CMD_PCI
#endif
@@ -452,6 +485,8 @@
"loadfdt=tftp ${fdt_addr_r} ${fdt_file}\0" \
"loadkernel=tftp ${kernel_addr_r} ${boot_file}\0" \
"unlock=yes\0" \
+ "EEprom_ivm=pca9547:70:9\0" \
+ "dtt_bus=pca9547:70:a\0" \
""
#endif /* __CONFIG_H */