summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--board/freescale/mpc8544ds/law.c2
-rw-r--r--board/freescale/mpc8544ds/mpc8544ds.c5
-rw-r--r--board/freescale/mpc8544ds/tlb.c12
-rw-r--r--board/freescale/mpc8544ds/u-boot.lds1
-rw-r--r--board/sbc8560/sbc8560.c32
-rw-r--r--common/fdt_support.c87
-rw-r--r--cpu/mpc83xx/fdt.c20
-rw-r--r--cpu/mpc85xx/cpu.c2
-rw-r--r--cpu/mpc85xx/cpu_init.c47
-rw-r--r--cpu/mpc85xx/fdt.c7
-rw-r--r--cpu/mpc85xx/start.S9
-rw-r--r--cpu/mpc86xx/fdt.c2
-rw-r--r--include/asm-ppc/processor.h29
-rw-r--r--include/configs/MPC8544DS.h52
-rw-r--r--include/configs/MPC8560ADS.h38
-rw-r--r--include/configs/sbc8560.h128
-rw-r--r--include/fdt_support.h6
-rw-r--r--include/mpc83xx.h7
18 files changed, 366 insertions, 120 deletions
diff --git a/board/freescale/mpc8544ds/law.c b/board/freescale/mpc8544ds/law.c
index a82dede..54cf36b 100644
--- a/board/freescale/mpc8544ds/law.c
+++ b/board/freescale/mpc8544ds/law.c
@@ -30,7 +30,7 @@
struct law_entry law_table[] = {
SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI),
- SET_LAW(CFG_LBC_CACHE_BASE, LAWAR_SIZE_256M, LAW_TRGT_IF_LBC),
+ SET_LAW(CFG_LBC_NONCACHE_BASE, LAWAR_SIZE_128M, LAW_TRGT_IF_LBC),
SET_LAW(CFG_PCIE1_MEM_PHYS, LAWAR_SIZE_256M, LAW_TRGT_IF_PCIE_1),
SET_LAW(CFG_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1),
SET_LAW(CFG_PCIE2_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_2),
diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c
index 8c4b040..c39ce11 100644
--- a/board/freescale/mpc8544ds/mpc8544ds.c
+++ b/board/freescale/mpc8544ds/mpc8544ds.c
@@ -49,7 +49,10 @@ int checkboard (void)
if ((uint)&gur->porpllsr != 0xe00e0000) {
printf("immap size error %lx\n",(ulong)&gur->porpllsr);
}
- printf ("Board: MPC8544DS\n");
+ printf ("Board: MPC8544DS, System ID: 0x%02x, "
+ "System Version: 0x%02x, FPGA Version: 0x%02x\n",
+ in8(PIXIS_BASE + PIXIS_ID), in8(PIXIS_BASE + PIXIS_VER),
+ in8(PIXIS_BASE + PIXIS_PVER));
lbc->ltesr = 0xffffffff; /* Clear LBC error interrupts */
lbc->lteir = 0xffffffff; /* Enable LBC error interrupts */
diff --git a/board/freescale/mpc8544ds/tlb.c b/board/freescale/mpc8544ds/tlb.c
index 61fc609..40e0499 100644
--- a/board/freescale/mpc8544ds/tlb.c
+++ b/board/freescale/mpc8544ds/tlb.c
@@ -79,21 +79,13 @@ struct fsl_e_tlb_entry tlb_table[] = {
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 4, BOOKE_PAGESZ_64M, 1),
-#ifdef CFG_LBC_CACHE_BASE
/*
- * TLB 5: 64M Cacheable, non-guarded
- */
- SET_TLB_ENTRY(1, CFG_LBC_CACHE_BASE, CFG_LBC_CACHE_BASE,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 5, BOOKE_PAGESZ_64M, 1),
-#endif
- /*
- * TLB 6: 64M Non-cacheable, guarded
+ * TLB 5: 64M Non-cacheable, guarded
* 0xf8000000 64M PIXIS 0xF8000000 - 0xFBFFFFFF
*/
SET_TLB_ENTRY(1, CFG_LBC_NONCACHE_BASE, CFG_LBC_NONCACHE_BASE,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 6, BOOKE_PAGESZ_64M, 1),
+ 0, 5, BOOKE_PAGESZ_64M, 1),
};
int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/freescale/mpc8544ds/u-boot.lds b/board/freescale/mpc8544ds/u-boot.lds
index 785a006..c66c69f 100644
--- a/board/freescale/mpc8544ds/u-boot.lds
+++ b/board/freescale/mpc8544ds/u-boot.lds
@@ -71,6 +71,7 @@ SECTIONS
lib_generic/crc32.o (.text)
lib_ppc/extable.o (.text)
lib_generic/zlib.o (.text)
+ drivers/bios_emulator/atibios.o (.text)
*(.text)
*(.fixup)
*(.got1)
diff --git a/board/sbc8560/sbc8560.c b/board/sbc8560/sbc8560.c
index 2946ca1..d9e598c 100644
--- a/board/sbc8560/sbc8560.c
+++ b/board/sbc8560/sbc8560.c
@@ -33,6 +33,8 @@
#include <ioports.h>
#include <spd_sdram.h>
#include <miiphy.h>
+#include <libfdt.h>
+#include <fdt_support.h>
long int fixed_sdram (void);
@@ -421,7 +423,11 @@ long int fixed_sdram (void)
#ifndef CFG_RAMBOOT
volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR);
+#if (CFG_SDRAM_SIZE == 512)
+ ddr->cs0_bnds = 0x0000000f;
+#else
ddr->cs0_bnds = 0x00000007;
+#endif
ddr->cs1_bnds = 0x0010001f;
ddr->cs2_bnds = 0x00000000;
ddr->cs3_bnds = 0x00000000;
@@ -452,3 +458,29 @@ long int fixed_sdram (void)
return CFG_SDRAM_SIZE * 1024 * 1024;
}
#endif /* !defined(CONFIG_SPD_EEPROM) */
+
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+void
+ft_board_setup(void *blob, bd_t *bd)
+{
+ int node, tmp[2];
+#ifdef CONFIG_PCI
+ const char *path;
+#endif
+
+ ft_cpu_setup(blob, bd);
+
+ node = fdt_path_offset(blob, "/aliases");
+ tmp[0] = 0;
+ if (node >= 0) {
+#ifdef CONFIG_PCI
+ path = fdt_getprop(blob, node, "pci0", NULL);
+ if (path) {
+ tmp[1] = hose.last_busno - hose.first_busno;
+ do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+ }
+#endif
+ }
+}
+#endif
diff --git a/common/fdt_support.c b/common/fdt_support.c
index 3828228..93b144e 100644
--- a/common/fdt_support.c
+++ b/common/fdt_support.c
@@ -442,3 +442,90 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd)
prop, compat, fdt_strerror(err));
}
#endif /* CONFIG_HAS_FSL_DR_USB */
+
+#if defined(CONFIG_MPC83XX) || defined(CONFIG_MPC85xx)
+/*
+ * update crypto node properties to a specified revision of the SEC
+ * called with sec_rev == 0 if not on an mpc8xxxE processor
+ */
+void fdt_fixup_crypto_node(void *blob, int sec_rev)
+{
+ const struct sec_rev_prop {
+ u32 sec_rev;
+ u32 num_channels;
+ u32 channel_fifo_len;
+ u32 exec_units_mask;
+ u32 descriptor_types_mask;
+ } sec_rev_prop_list [] = {
+ { 0x0200, 4, 24, 0x07e, 0x01010ebf }, /* SEC 2.0 */
+ { 0x0201, 4, 24, 0x0fe, 0x012b0ebf }, /* SEC 2.1 */
+ { 0x0202, 1, 24, 0x04c, 0x0122003f }, /* SEC 2.2 */
+ { 0x0204, 4, 24, 0x07e, 0x012b0ebf }, /* SEC 2.4 */
+ { 0x0300, 4, 24, 0x9fe, 0x03ab0ebf }, /* SEC 3.0 */
+ { 0x0303, 4, 24, 0x97c, 0x03ab0abf }, /* SEC 3.3 */
+ };
+ char compat_strlist[ARRAY_SIZE(sec_rev_prop_list) *
+ sizeof("fsl,secX.Y")];
+ int crypto_node, sec_idx, err;
+ char *p;
+ u32 val;
+
+ /* locate crypto node based on lowest common compatible */
+ crypto_node = fdt_node_offset_by_compatible(blob, -1, "fsl,sec2.0");
+ if (crypto_node == -FDT_ERR_NOTFOUND)
+ return;
+
+ /* delete it if not on an E-processor */
+ if (crypto_node > 0 && !sec_rev) {
+ fdt_del_node(blob, crypto_node);
+ return;
+ }
+
+ /* else we got called for possible uprev */
+ for (sec_idx = 0; sec_idx < ARRAY_SIZE(sec_rev_prop_list); sec_idx++)
+ if (sec_rev_prop_list[sec_idx].sec_rev == sec_rev)
+ break;
+
+ if (sec_idx == ARRAY_SIZE(sec_rev_prop_list)) {
+ puts("warning: unknown SEC revision number\n");
+ return;
+ }
+
+ val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].num_channels);
+ err = fdt_setprop(blob, crypto_node, "fsl,num-channels", &val, 4);
+ if (err < 0)
+ printf("WARNING: could not set crypto property: %s\n",
+ fdt_strerror(err));
+
+ val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].descriptor_types_mask);
+ err = fdt_setprop(blob, crypto_node, "fsl,descriptor-types-mask", &val, 4);
+ if (err < 0)
+ printf("WARNING: could not set crypto property: %s\n",
+ fdt_strerror(err));
+
+ val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].exec_units_mask);
+ err = fdt_setprop(blob, crypto_node, "fsl,exec-units-mask", &val, 4);
+ if (err < 0)
+ printf("WARNING: could not set crypto property: %s\n",
+ fdt_strerror(err));
+
+ val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].channel_fifo_len);
+ err = fdt_setprop(blob, crypto_node, "fsl,channel-fifo-len", &val, 4);
+ if (err < 0)
+ printf("WARNING: could not set crypto property: %s\n",
+ fdt_strerror(err));
+
+ val = 0;
+ while (sec_idx >= 0) {
+ p = compat_strlist + val;
+ val += sprintf(p, "fsl,sec%d.%d",
+ (sec_rev_prop_list[sec_idx].sec_rev & 0xff00) >> 8,
+ sec_rev_prop_list[sec_idx].sec_rev & 0x00ff) + 1;
+ sec_idx--;
+ }
+ err = fdt_setprop(blob, crypto_node, "compatible", &compat_strlist, val);
+ if (err < 0)
+ printf("WARNING: could not set crypto property: %s\n",
+ fdt_strerror(err));
+}
+#endif /* defined(CONFIG_MPC83XX) || defined(CONFIG_MPC85xx) */
diff --git a/cpu/mpc83xx/fdt.c b/cpu/mpc83xx/fdt.c
index 02c4d05..fda85c1 100644
--- a/cpu/mpc83xx/fdt.c
+++ b/cpu/mpc83xx/fdt.c
@@ -26,6 +26,7 @@
#include <common.h>
#include <libfdt.h>
#include <fdt_support.h>
+#include <asm/processor.h>
extern void ft_qe_setup(void *blob);
@@ -33,6 +34,23 @@ DECLARE_GLOBAL_DATA_PTR;
void ft_cpu_setup(void *blob, bd_t *bd)
{
+ immap_t *immr = (immap_t *)CFG_IMMR;
+ int spridr = immr->sysconf.spridr;
+
+ /*
+ * delete crypto node if not on an E-processor
+ * initial revisions of the MPC834xE/6xE have the original SEC 2.0.
+ * EA revisions got the SEC uprevved to 2.4 but since the default device
+ * tree contains SEC 2.0 properties we uprev them here.
+ */
+ if (!IS_E_PROCESSOR(spridr))
+ fdt_fixup_crypto_node(blob, 0);
+ else if (IS_E_PROCESSOR(spridr) &&
+ (SPR_FAMILY(spridr) == SPR_834X_FAMILY ||
+ SPR_FAMILY(spridr) == SPR_836X_FAMILY) &&
+ REVID_MAJOR(spridr) >= 2)
+ fdt_fixup_crypto_node(blob, 0x0204);
+
#if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) ||\
defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3)
fdt_fixup_ethernet(blob, bd);
@@ -60,7 +78,7 @@ void ft_cpu_setup(void *blob, bd_t *bd)
#ifdef CFG_NS16550
do_fixup_by_compat_u32(blob, "ns16550",
- "clock-frequency", bd->bi_busfreq, 1);
+ "clock-frequency", CFG_NS16550_CLK, 1);
#endif
fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c
index 0d50549..bde8e56 100644
--- a/cpu/mpc85xx/cpu.c
+++ b/cpu/mpc85xx/cpu.c
@@ -97,7 +97,7 @@ int checkcpu (void)
if (cpu) {
puts(cpu->name);
- if (svr & 0x80000)
+ if (IS_E_PROCESSOR(svr))
puts("E");
} else {
puts("Unknown");
diff --git a/cpu/mpc85xx/cpu_init.c b/cpu/mpc85xx/cpu_init.c
index 736aef1..4feb751 100644
--- a/cpu/mpc85xx/cpu_init.c
+++ b/cpu/mpc85xx/cpu_init.c
@@ -261,37 +261,50 @@ int cpu_init_r(void)
volatile uint cache_ctl;
uint svr, ver;
uint l2srbar;
+ u32 l2siz_field;
svr = get_svr();
ver = SVR_SOC_VER(svr);
asm("msync;isync");
cache_ctl = l2cache->l2ctl;
+ l2siz_field = (cache_ctl >> 28) & 0x3;
- switch (cache_ctl & 0x30000000) {
- case 0x20000000:
- if (ver == SVR_8548 || ver == SVR_8548_E ||
- ver == SVR_8544 || ver == SVR_8568_E) {
- puts ("512 KB ");
- /* set L2E=1, L2I=1, & L2SRAM=0 */
- cache_ctl = 0xc0000000;
+ switch (l2siz_field) {
+ case 0x0:
+ printf(" unknown size (0x%08x)\n", cache_ctl);
+ return -1;
+ break;
+ case 0x1:
+ if (ver == SVR_8540 || ver == SVR_8560 ||
+ ver == SVR_8541 || ver == SVR_8541_E ||
+ ver == SVR_8555 || ver == SVR_8555_E) {
+ puts("128 KB ");
+ /* set L2E=1, L2I=1, & L2BLKSZ=1 (128 Kbyte) */
+ cache_ctl = 0xc4000000;
} else {
puts("256 KB ");
+ cache_ctl = 0xc0000000; /* set L2E=1, L2I=1, & L2SRAM=0 */
+ }
+ break;
+ case 0x2:
+ if (ver == SVR_8540 || ver == SVR_8560 ||
+ ver == SVR_8541 || ver == SVR_8541_E ||
+ ver == SVR_8555 || ver == SVR_8555_E) {
+ puts("256 KB ");
/* set L2E=1, L2I=1, & L2BLKSZ=2 (256 Kbyte) */
cache_ctl = 0xc8000000;
+ } else {
+ puts ("512 KB ");
+ /* set L2E=1, L2I=1, & L2SRAM=0 */
+ cache_ctl = 0xc0000000;
}
break;
- case 0x10000000:
- puts("256 KB ");
- if (ver == SVR_8544 || ver == SVR_8544_E) {
- cache_ctl = 0xc0000000; /* set L2E=1, L2I=1, & L2SRAM=0 */
- }
+ case 0x3:
+ puts("1024 KB ");
+ /* set L2E=1, L2I=1, & L2SRAM=0 */
+ cache_ctl = 0xc0000000;
break;
- case 0x30000000:
- case 0x00000000:
- default:
- printf(" unknown size (0x%08x)\n", cache_ctl);
- return -1;
}
if (l2cache->l2ctl & 0x80000000) {
diff --git a/cpu/mpc85xx/fdt.c b/cpu/mpc85xx/fdt.c
index 92952e6..c159934 100644
--- a/cpu/mpc85xx/fdt.c
+++ b/cpu/mpc85xx/fdt.c
@@ -29,6 +29,7 @@
#include <asm/processor.h>
extern void ft_qe_setup(void *blob);
+
#ifdef CONFIG_MP
#include "mp.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -205,6 +206,10 @@ static inline void ft_fixup_cache(void *blob)
void ft_cpu_setup(void *blob, bd_t *bd)
{
+ /* delete crypto node if not on an E-processor */
+ if (!IS_E_PROCESSOR(get_svr()))
+ fdt_fixup_crypto_node(blob, 0);
+
#if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) ||\
defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3)
fdt_fixup_ethernet(blob, bd);
@@ -224,7 +229,7 @@ void ft_cpu_setup(void *blob, bd_t *bd)
#ifdef CFG_NS16550
do_fixup_by_compat_u32(blob, "ns16550",
- "clock-frequency", bd->bi_busfreq, 1);
+ "clock-frequency", CFG_NS16550_CLK, 1);
#endif
#ifdef CONFIG_CPM2
diff --git a/cpu/mpc85xx/start.S b/cpu/mpc85xx/start.S
index 2b5d90e..10fe936 100644
--- a/cpu/mpc85xx/start.S
+++ b/cpu/mpc85xx/start.S
@@ -188,11 +188,12 @@ _start_e500:
lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16M)@h
ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16M)@l
- lis r8,FSL_BOOKE_MAS2(TEXT_BASE, (MAS2_I|MAS2_G))@h
- ori r8,r8,FSL_BOOKE_MAS2(TEXT_BASE, (MAS2_I|MAS2_G))@l
+ /* Align the mapping to 16MB */
+ lis r8,FSL_BOOKE_MAS2(TEXT_BASE & 0xff000000, (MAS2_I|MAS2_G))@h
+ ori r8,r8,FSL_BOOKE_MAS2(TEXT_BASE & 0xff000000, (MAS2_I|MAS2_G))@l
- lis r9,FSL_BOOKE_MAS3(0xff800000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
- ori r9,r9,FSL_BOOKE_MAS3(0xff800000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
+ lis r9,FSL_BOOKE_MAS3(0xff000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
+ ori r9,r9,FSL_BOOKE_MAS3(0xff000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
mtspr MAS0,r6
mtspr MAS1,r7
diff --git a/cpu/mpc86xx/fdt.c b/cpu/mpc86xx/fdt.c
index 379306e..80a5c78 100644
--- a/cpu/mpc86xx/fdt.c
+++ b/cpu/mpc86xx/fdt.c
@@ -30,6 +30,6 @@ void ft_cpu_setup(void *blob, bd_t *bd)
#ifdef CFG_NS16550
do_fixup_by_compat_u32(blob, "ns16550",
- "clock-frequency", bd->bi_busfreq, 1);
+ "clock-frequency", CFG_NS16550_CLK, 1);
#endif
}
diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h
index 10fd478..e617868 100644
--- a/include/asm-ppc/processor.h
+++ b/include/asm-ppc/processor.h
@@ -426,6 +426,7 @@
/* e500 definitions */
#define SPRN_L1CFG0 0x203 /* L1 Cache Configuration Register 0 */
#define SPRN_L1CFG1 0x204 /* L1 Cache Configuration Register 1 */
+#define SPRN_L2CFG0 0x207 /* L2 Cache Configuration Register 0 */
#define SPRN_L1CSR0 0x3f2 /* L1 Data Cache Control and Status Register 0 */
#define L1CSR0_CPE 0x00010000 /* Data Cache Parity Enable */
#define L1CSR0_DCFI 0x00000002 /* Data Cache Flash Invalidate */
@@ -434,6 +435,21 @@
#define L1CSR1_CPE 0x00010000 /* Instruction Cache Parity Enable */
#define L1CSR1_ICFI 0x00000002 /* Instruction Cache Flash Invalidate */
#define L1CSR1_ICE 0x00000001 /* Instruction Cache Enable */
+#define SPRN_L1CSR2 0x25e /* L1 Data Cache Control and Status Register 2 */
+#define SPRN_L2CSR0 0x3f9 /* L2 Data Cache Control and Status Register 0 */
+#define L2CSR0_L2E 0x80000000 /* L2 Cache Enable */
+#define L2CSR0_L2PE 0x40000000 /* L2 Cache Parity/ECC Enable */
+#define L2CSR0_L2WP 0x1c000000 /* L2 I/D Way Partioning */
+#define L2CSR0_L2CM 0x03000000 /* L2 Cache Coherency Mode */
+#define L2CSR0_L2FI 0x00200000 /* L2 Cache Flash Invalidate */
+#define L2CSR0_L2IO 0x00100000 /* L2 Cache Instruction Only */
+#define L2CSR0_L2DO 0x00010000 /* L2 Cache Data Only */
+#define L2CSR0_L2REP 0x00003000 /* L2 Line Replacement Algo */
+#define L2CSR0_L2FL 0x00000800 /* L2 Cache Flush */
+#define L2CSR0_L2LFC 0x00000400 /* L2 Cache Lock Flash Clear */
+#define L2CSR0_L2LOA 0x00000080 /* L2 Cache Lock Overflow Allocate */
+#define L2CSR0_L2LO 0x00000020 /* L2 Cache Lock Overflow */
+#define SPRN_L2CSR1 0x3fa /* L2 Data Cache Control and Status Register 1 */
#define SPRN_MMUCSR0 0x3f4 /* MMU control and status register 0 */
#define SPRN_MAS0 0x270 /* MMU Assist Register 0 */
@@ -624,8 +640,12 @@
#define MCSRR1 SPRN_MCSRR1
#define L1CSR0 SPRN_L1CSR0
#define L1CSR1 SPRN_L1CSR1
+#define L1CSR2 SPRN_L1CSR2
#define L1CFG0 SPRN_L1CFG0
#define L1CFG1 SPRN_L1CFG1
+#define L2CFG0 SPRN_L2CFG0
+#define L2CSR0 SPRN_L2CSR0
+#define L2CSR1 SPRN_L2CSR1
#define MCSR SPRN_MCSR
#define MMUCSR0 SPRN_MMUCSR0
#define BUCSR SPRN_BUCSR
@@ -885,6 +905,15 @@
/* Some parts define SVR[0:23] as the SOC version */
#define SVR_SOC_VER(svr) (((svr) >> 8) & 0xFFFFFF) /* SOC Version fields */
+/* whether MPC8xxxE (i.e. has SEC) */
+#if defined(CONFIG_MPC85xx)
+#define IS_E_PROCESSOR(svr) (svr & 0x80000)
+#else
+#if defined(CONFIG_MPC83XX)
+#define IS_E_PROCESSOR(spridr) (!(spridr & 0x00010000))
+#endif
+#endif
+
/*
* SVR_SOC_VER() Version Values
*/
diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
index 669f4d7c..091fd2e 100644
--- a/include/configs/MPC8544DS.h
+++ b/include/configs/MPC8544DS.h
@@ -148,8 +148,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
*/
#define CFG_BOOT_BLOCK 0xfc000000 /* boot TLB */
-#define CFG_LBC_CACHE_BASE 0xf0000000 /* Localbus cacheable */
-
#define CFG_FLASH_BASE 0xff800000 /* start of FLASH 8M */
#define CFG_BR0_PRELIM 0xff801001
@@ -158,10 +156,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CFG_OR0_PRELIM 0xff806e65
#define CFG_OR1_PRELIM 0xff806e65
-#define CFG_FLASH_BANKS_LIST {0xfe800000,CFG_FLASH_BASE}
+#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE}
#define CFG_FLASH_QUIET_TEST
-#define CFG_MAX_FLASH_BANKS 2 /* number of banks */
+#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
#define CFG_MAX_FLASH_SECT 128 /* sectors per device */
#undef CFG_FLASH_CHECKSUM
#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
@@ -203,30 +201,18 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
/* define to use L1 as initial stack */
-#define CONFIG_L1_INIT_RAM 1
-#define CFG_INIT_L1_LOCK 1
-#define CFG_INIT_L1_ADDR 0xf4010000 /* Initial L1 address */
-#define CFG_INIT_L1_END 0x00004000 /* End of used area in RAM */
-
-/* define to use L2SRAM as initial stack */
-#undef CONFIG_L2_INIT_RAM
-#define CFG_INIT_L2_ADDR 0xf8fc0000
-#define CFG_INIT_L2_END 0x00040000 /* End of used area in RAM */
-
-#ifdef CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_ADDR CFG_INIT_L1_ADDR
-#define CFG_INIT_RAM_END CFG_INIT_L1_END
-#else
-#define CFG_INIT_RAM_ADDR CFG_INIT_L2_ADDR
-#define CFG_INIT_RAM_END CFG_INIT_L2_END
-#endif
+#define CONFIG_L1_INIT_RAM
+#define CFG_INIT_RAM_LOCK 1
+#define CFG_INIT_RAM_ADDR 0xf4010000 /* Initial L1 address */
+#define CFG_INIT_RAM_END 0x00004000 /* End of used area in RAM */
+
#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
+#define CFG_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */
/* Serial Port - controlled on board with jumper J8
* open - index 2
@@ -314,6 +300,26 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#if defined(CONFIG_PCI)
+/*PCIE video card used*/
+#define VIDEO_IO_OFFSET CFG_PCIE2_IO_PHYS
+
+/*PCI video card used*/
+/*#define VIDEO_IO_OFFSET CFG_PCI1_IO_PHYS*/
+
+/* video */
+#define CONFIG_VIDEO
+
+#if defined(CONFIG_VIDEO)
+#define CONFIG_BIOSEMU
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_SW_CURSOR
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_ATI_RADEON_FB
+#define CONFIG_VIDEO_LOGO
+/*#define CONFIG_CONSOLE_CURSOR*/
+#define CFG_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET
+#endif
+
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
@@ -382,7 +388,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#if CFG_MONITOR_BASE > 0xfff80000
#define CFG_ENV_ADDR 0xfff80000
#else
-#define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x70000)
#endif
#define CFG_ENV_SIZE 0x2000
#define CFG_ENV_SECT_SIZE 0x10000 /* 64K (one sector) */
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index edf8525..27212162 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -538,29 +538,29 @@
#define CONFIG_BAUDRATE 115200
#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=eth0\0" \
- "consoledev=ttyCPM\0" \
- "ramdiskaddr=1000000\0" \
- "ramdiskfile=your.ramdisk.u-boot\0" \
- "fdtaddr=400000\0" \
- "fdtfile=mpc8560ads.dtb\0"
+ "netdev=eth0\0" \
+ "consoledev=ttyCPM\0" \
+ "ramdiskaddr=1000000\0" \
+ "ramdiskfile=your.ramdisk.u-boot\0" \
+ "fdtaddr=400000\0" \
+ "fdtfile=mpc8560ads.dtb\0"
#define CONFIG_NFSBOOTCOMMAND \
- "setenv bootargs root=/dev/nfs rw " \
- "nfsroot=$serverip:$rootpath " \
- "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
- "console=$consoledev,$baudrate $othbootargs;" \
- "tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr - $fdtaddr"
+ "setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$serverip:$rootpath " \
+ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr - $fdtaddr"
#define CONFIG_RAMBOOTCOMMAND \
- "setenv bootargs root=/dev/ram rw " \
- "console=$consoledev,$baudrate $othbootargs;" \
- "tftp $ramdiskaddr $ramdiskfile;" \
- "tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr $ramdiskaddr $fdtaddr"
+ "setenv bootargs root=/dev/ram rw " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $ramdiskaddr $ramdiskfile;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr $ramdiskaddr $fdtaddr"
#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h
index 146eafe..6345cce 100644
--- a/include/configs/sbc8560.h
+++ b/include/configs/sbc8560.h
@@ -24,8 +24,8 @@
* MA 02111-1307 USA
*/
-/* mpc8560ads board configuration file */
-/* please refer to doc/README.mpc85xx for more info */
+/* sbc8560 board configuration file */
+/* please refer to doc/README.sbc8560 for more info */
/* make sure you change the MAC address and other network params first,
* search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file
*/
@@ -102,11 +102,11 @@
#define CFG_SDRAM_SIZE 512 /* DDR is 512MB */
#define SPD_EEPROM_ADDRESS 0x55 /* DDR DIMM */
-#undef CONFIG_DDR_ECC /* only for ECC DDR module */
-#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */
+#undef CONFIG_DDR_ECC /* only for ECC DDR module */
+#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */
#if defined(CONFIG_MPC85xx_REV1)
- #define CONFIG_DDR_DLL /* possible DLL fix needed */
+ #define CONFIG_DDR_DLL /* possible DLL fix needed */
#endif
#undef CONFIG_CLOCKS_IN_MHZ
@@ -177,8 +177,8 @@
#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
/* Serial Port */
-#undef CONFIG_CONS_ON_SCC /* define if console on SCC */
-#undef CONFIG_CONS_NONE /* define if console on something else */
+#undef CONFIG_CONS_ON_SCC /* define if console on SCC */
+#undef CONFIG_CONS_NONE /* define if console on something else */
#define CONFIG_CONS_INDEX 1
#undef CONFIG_SERIAL_SOFTWARE_FIFO
@@ -200,6 +200,11 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+#define CONFIG_OF_STDOUT_VIA_ALIAS 1
+
/*
* I2C
*/
@@ -215,16 +220,28 @@
#define CFG_PCI_MEM_PHYS 0xC0000000
#define CFG_PCI_MEM_SIZE 0x10000000
-#if defined(CONFIG_TSEC_ENET) /* TSEC Ethernet port */
+#ifdef CONFIG_TSEC_ENET
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI 1
+#endif
-# define CONFIG_NET_MULTI 1
-# define CONFIG_MII 1 /* MII PHY management */
-# define CONFIG_MPC85xx_TSEC1
-# define CONFIG_MPC85xx_TSEC1_NAME "TSEC0"
-# define TSEC1_PHY_ADDR 25
-# define TSEC1_PHYIDX 0
-/* Options are: TSEC0 */
-# define CONFIG_ETHPRIME "TSEC0"
+#ifndef CONFIG_MII
+#define CONFIG_MII 1 /* MII PHY management */
+#endif
+#define CONFIG_TSEC1 1
+#define CONFIG_TSEC1_NAME "TSEC0"
+#define CONFIG_TSEC2 1
+#define CONFIG_TSEC2_NAME "TSEC1"
+#define TSEC1_PHY_ADDR 0x19
+#define TSEC2_PHY_ADDR 0x1a
+#define TSEC1_PHYIDX 0
+#define TSEC2_PHYIDX 0
+#define TSEC1_FLAGS TSEC_GIGABIT
+#define TSEC2_FLAGS TSEC_GIGABIT
+
+/* Options are: TSEC[0-1] */
+#define CONFIG_ETHPRIME "TSEC0"
#elif defined(CONFIG_ETHER_ON_FCC) /* CPM FCC Ethernet */
@@ -272,20 +289,20 @@
* FLASH and environment organization
*/
-#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
-#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
+#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
#if 0
-#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
-#define CFG_FLASH_PROTECTION /* use hardware protection */
+#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
+#define CFG_FLASH_PROTECTION /* use hardware protection */
#endif
-#define CFG_MAX_FLASH_SECT 64 /* max number of sectors on one chip */
-#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 64 /* max number of sectors on one chip */
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
#undef CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT 200000 /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT 50000 /* Timeout for Flash Write (in ms) */
+#define CFG_FLASH_ERASE_TOUT 200000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 50000 /* Timeout for Flash Write (in ms) */
-#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
#if 0
/* XXX This doesn't work and I don't want to fix it */
@@ -315,9 +332,8 @@
#define CFG_ENV_SIZE 0x2000
#endif
-#define CONFIG_BOOTARGS "root=/dev/nfs rw nfsroot=192.168.0.251:/tftpboot ip=192.168.0.105:192.168.0.251::255.255.255.0:sbc8560:eth0:off console=ttyS0,9600"
+#define CONFIG_BOOTARGS "root=/dev/nfs rw ip=dhcp console=ttyS0,9600"
/*#define CONFIG_BOOTARGS "root=/dev/ram rw console=ttyS0,115200"*/
-#define CONFIG_BOOTCOMMAND "bootm 0xff800000 0xffa00000"
#define CONFIG_BOOTDELAY 5 /* -1 disable autoboot */
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
@@ -389,25 +405,57 @@
#define BOOTFLAG_WARM 0x02 /* Software reboot */
#if defined(CONFIG_CMD_KGDB)
- #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
- #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
-/*Note: change below for your network setting!!! */
#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
-# define CONFIG_ETHADDR 00:01:af:07:9b:8a
-# define CONFIG_HAS_ETH1
-# define CONFIG_ETH1ADDR 00:01:af:07:9b:8b
-# define CONFIG_HAS_ETH2
-# define CONFIG_ETH2ADDR 00:01:af:07:9b:8c
+#define CONFIG_HAS_ETH0
+#define CONFIG_HAS_ETH1
#endif
-#define CONFIG_SERVERIP 192.168.0.131
-#define CONFIG_IPADDR 192.168.0.105
-#define CONFIG_GATEWAYIP 0.0.0.0
-#define CONFIG_NETMASK 255.255.255.0
+/* You can compile in a MAC address and your custom net settings by using
+ * the following syntax. Your board should be marked with the assigned
+ * MAC addresses directly on it.
+ *
+ * #define CONFIG_ETHADDR de:ad:be:ef:00:00
+ * #define CONFIG_ETH1ADDR fa:ke:ad:dr:es:s!
+ * #define CONFIG_SERVERIP <server ip>
+ * #define CONFIG_IPADDR <board ip>
+ * #define CONFIG_GATEWAYIP <gateway ip>
+ * #define CONFIG_NETMASK <your netmask>
+ */
+
#define CONFIG_HOSTNAME SBC8560
#define CONFIG_ROOTPATH /home/ppc
-#define CONFIG_BOOTFILE pImage
+#define CONFIG_BOOTFILE uImage
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "consoledev=ttyS0\0" \
+ "ramdiskaddr=2000000\0" \
+ "ramdiskfile=ramdisk.uboot\0" \
+ "fdtaddr=c00000\0" \
+ "fdtfile=sbc8560.dtb\0"
+
+#define CONFIG_NFSBOOTCOMMAND \
+ "setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$serverip:$rootpath " \
+ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr - $fdtaddr"
+
+
+#define CONFIG_RAMBOOTCOMMAND \
+ "setenv bootargs root=/dev/ram rw " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $ramdiskaddr $ramdiskfile;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr $ramdiskaddr $fdtaddr"
+
+#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
#endif /* __CONFIG_H */
diff --git a/include/fdt_support.h b/include/fdt_support.h
index 890993f..a7c6326 100644
--- a/include/fdt_support.h
+++ b/include/fdt_support.h
@@ -56,6 +56,12 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd);
static inline void fdt_fixup_dr_usb(void *blob, bd_t *bd) {}
#endif /* CONFIG_HAS_FSL_DR_USB */
+#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC83XX)
+void fdt_fixup_crypto_node(void *blob, int sec_rev);
+#else
+static inline void fdt_fixup_crypto_node(void *blob, int sec_rev) {}
+#endif
+
#ifdef CONFIG_OF_BOARD_SETUP
void ft_board_setup(void *blob, bd_t *bd);
void ft_cpu_setup(void *blob, bd_t *bd);
diff --git a/include/mpc83xx.h b/include/mpc83xx.h
index 939b825..897ecd6 100644
--- a/include/mpc83xx.h
+++ b/include/mpc83xx.h
@@ -61,21 +61,26 @@
#endif
#define PARTID_NO_E(spridr) ((spridr & 0xFFFE0000) >> 16)
-#define IS_E_PROCESSOR(spridr) (!(spridr & 0x00010000)) /* has SEC */
+#define SPR_FAMILY(spridr) ((spridr & 0xFFF00000) >> 20)
+#define SPR_831X_FAMILY 0x80B
#define SPR_8311 0x80B2
#define SPR_8313 0x80B0
#define SPR_8314 0x80B6
#define SPR_8315 0x80B4
+#define SPR_832X_FAMILY 0x806
#define SPR_8321 0x8066
#define SPR_8323 0x8062
+#define SPR_834X_FAMILY 0x803
#define SPR_8343 0x8036
#define SPR_8347_TBGA_ 0x8032
#define SPR_8347_PBGA_ 0x8034
#define SPR_8349 0x8030
+#define SPR_836X_FAMILY 0x804
#define SPR_8358_TBGA_ 0x804A
#define SPR_8358_PBGA_ 0x804E
#define SPR_8360 0x8048
+#define SPR_837X_FAMILY 0x80C
#define SPR_8377 0x80C6
#define SPR_8378 0x80C4
#define SPR_8379 0x80C2