summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--README.imx3113
-rw-r--r--board/freescale/common/sys_eeprom.c2
-rw-r--r--board/freescale/mpc8313erdb/sdram.c2
-rw-r--r--board/freescale/mpc8315erdb/sdram.c2
-rw-r--r--board/freescale/mpc8349emds/mpc8349emds.c2
-rw-r--r--board/freescale/mpc8349itx/mpc8349itx.c2
-rw-r--r--board/freescale/mpc837xemds/mpc837xemds.c2
-rw-r--r--board/freescale/mpc837xerdb/mpc837xerdb.c2
-rw-r--r--board/matrix_vision/mvblm7/mvblm7.c2
-rw-r--r--board/sbc8349/sbc8349.c2
-rw-r--r--cpu/arm1136/mx31/interrupts.c79
-rw-r--r--cpu/mpc83xx/spd_sdram.c2
-rw-r--r--cpu/mpc85xx/cpu.c3
-rw-r--r--cpu/mpc85xx/fdt.c3
-rw-r--r--cpu/mpc85xx/speed.c7
-rw-r--r--doc/README.imx3129
-rw-r--r--doc/README.mx3117
-rw-r--r--doc/uImage.FIT/multi.its2
-rw-r--r--drivers/mtd/cfi_flash.c3
-rw-r--r--include/asm-ppc/immap_85xx.h7
-rw-r--r--include/configs/MPC8313ERDB.h3
-rw-r--r--include/configs/MPC8315ERDB.h1
-rw-r--r--include/configs/MPC8323ERDB.h3
-rw-r--r--include/configs/MPC832XEMDS.h1
-rw-r--r--include/configs/MPC8349EMDS.h1
-rw-r--r--include/configs/MPC8349ITX.h1
-rw-r--r--include/configs/MPC8360EMDS.h1
-rw-r--r--include/configs/MPC837XEMDS.h1
-rw-r--r--include/configs/MPC837XERDB.h3
-rw-r--r--include/configs/MPC8536DS.h3
-rw-r--r--include/configs/MPC8572DS.h19
-rw-r--r--include/configs/TQM5200.h3
-rw-r--r--include/configs/imx31_litekit.h4
-rw-r--r--include/configs/imx31_phycore.h2
-rw-r--r--include/configs/mx31ads.h4
-rw-r--r--include/libfdt.h28
-rw-r--r--include/mpc83xx.h2
-rw-r--r--lib_arm/board.c19
-rw-r--r--lib_ppc/bootm.c2
-rw-r--r--libfdt/fdt.c2
-rw-r--r--libfdt/fdt_ro.c49
41 files changed, 204 insertions, 131 deletions
diff --git a/README.imx31 b/README.imx31
deleted file mode 100644
index f545f01..0000000
--- a/README.imx31
+++ /dev/null
@@ -1,13 +0,0 @@
-i.MX31 specific Configuration Options:
---------------------------------------
-
-- Timer precision:
- CONFIG_MX31_TIMER_HIGH_PRECISION
-
- Enable higher precision timer. The low-precision timer
- (default) provides approximately 4% error, whereas the
- high-precision timer is about 0.4% accurate. The extra
- accuracy is achieved at the cost of higher computational
- overhead, which, in places where time is measured, should
- not be critical, so, it should be safe to enable this
- option.
diff --git a/board/freescale/common/sys_eeprom.c b/board/freescale/common/sys_eeprom.c
index e53ead0..9bef92e 100644
--- a/board/freescale/common/sys_eeprom.c
+++ b/board/freescale/common/sys_eeprom.c
@@ -463,6 +463,6 @@ unsigned int get_cpu_board_revision(void)
if ((be.major == 0xff) && (be.minor == 0xff))
return MPC85XX_CPU_BOARD_REV(0, 0);
- return MPC85XX_CPU_BOARD_REV(e.major, e.minor);
+ return MPC85XX_CPU_BOARD_REV(be.major, be.minor);
}
#endif
diff --git a/board/freescale/mpc8313erdb/sdram.c b/board/freescale/mpc8313erdb/sdram.c
index 3a6347f..128cd40 100644
--- a/board/freescale/mpc8313erdb/sdram.c
+++ b/board/freescale/mpc8313erdb/sdram.c
@@ -64,7 +64,7 @@ static long fixed_sdram(void)
volatile immap_t *im = (volatile immap_t *)CFG_IMMR;
u32 msize_log2 = __ilog2(msize);
- im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE >> 12;
+ im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE & 0xfffff000;
im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1);
im->sysconf.ddrcdr = CFG_DDRCDR_VALUE;
diff --git a/board/freescale/mpc8315erdb/sdram.c b/board/freescale/mpc8315erdb/sdram.c
index 07e6486..3714c2c 100644
--- a/board/freescale/mpc8315erdb/sdram.c
+++ b/board/freescale/mpc8315erdb/sdram.c
@@ -60,7 +60,7 @@ static long fixed_sdram(void)
u32 msize = CFG_DDR_SIZE * 1024 * 1024;
u32 msize_log2 = __ilog2(msize);
- im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE >> 12;
+ im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE & 0xfffff000;
im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1);
im->sysconf.ddrcdr = CFG_DDRCDR_VALUE;
diff --git a/board/freescale/mpc8349emds/mpc8349emds.c b/board/freescale/mpc8349emds/mpc8349emds.c
index 4c04f2c..ef947fe 100644
--- a/board/freescale/mpc8349emds/mpc8349emds.c
+++ b/board/freescale/mpc8349emds/mpc8349emds.c
@@ -109,7 +109,7 @@ int fixed_sdram(void)
return -1;
}
}
- im->sysconf.ddrlaw[0].bar = ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff);
+ im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE & 0xfffff000;
im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
#if (CFG_DDR_SIZE != 256)
diff --git a/board/freescale/mpc8349itx/mpc8349itx.c b/board/freescale/mpc8349itx/mpc8349itx.c
index d3fc560..0a20e2b 100644
--- a/board/freescale/mpc8349itx/mpc8349itx.c
+++ b/board/freescale/mpc8349itx/mpc8349itx.c
@@ -55,7 +55,7 @@ int fixed_sdram(void)
im->sysconf.ddrlaw[0].ar =
LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
- im->sysconf.ddrlaw[0].bar = (CFG_DDR_SDRAM_BASE >> 12) & 0xfffff;
+ im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE & 0xfffff000;
/* Only one CS0 for DDR */
im->ddr.csbnds[0].csbnds = 0x0000000f;
diff --git a/board/freescale/mpc837xemds/mpc837xemds.c b/board/freescale/mpc837xemds/mpc837xemds.c
index 40f1e63..8003ec1 100644
--- a/board/freescale/mpc837xemds/mpc837xemds.c
+++ b/board/freescale/mpc837xemds/mpc837xemds.c
@@ -108,7 +108,7 @@ int fixed_sdram(void)
u32 msize = CFG_DDR_SIZE * 1024 * 1024;
u32 msize_log2 = __ilog2(msize);
- im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE >> 12;
+ im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE & 0xfffff000;
im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1);
#if (CFG_DDR_SIZE != 512)
diff --git a/board/freescale/mpc837xerdb/mpc837xerdb.c b/board/freescale/mpc837xerdb/mpc837xerdb.c
index aaefc18..e547b51 100644
--- a/board/freescale/mpc837xerdb/mpc837xerdb.c
+++ b/board/freescale/mpc837xerdb/mpc837xerdb.c
@@ -96,7 +96,7 @@ int fixed_sdram(void)
u32 msize = CFG_DDR_SIZE * 1024 * 1024;
u32 msize_log2 = __ilog2(msize);
- im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE >> 12;
+ im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE & 0xfffff000;
im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1);
im->sysconf.ddrcdr = CFG_DDRCDR_VALUE;
diff --git a/board/matrix_vision/mvblm7/mvblm7.c b/board/matrix_vision/mvblm7/mvblm7.c
index b07f913..3dcff67 100644
--- a/board/matrix_vision/mvblm7/mvblm7.c
+++ b/board/matrix_vision/mvblm7/mvblm7.c
@@ -50,7 +50,7 @@ int fixed_sdram(void)
if (ddr_size & 1)
return -1;
}
- im->sysconf.ddrlaw[0].bar = ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff);
+ im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE & 0xfffff000;
im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) &
LAWAR_SIZE);
diff --git a/board/sbc8349/sbc8349.c b/board/sbc8349/sbc8349.c
index 4a44fda..93ada0b 100644
--- a/board/sbc8349/sbc8349.c
+++ b/board/sbc8349/sbc8349.c
@@ -101,7 +101,7 @@ int fixed_sdram(void)
return -1;
}
}
- im->sysconf.ddrlaw[0].bar = ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff);
+ im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE & 0xfffff000;
im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
#if (CFG_DDR_SIZE != 256)
diff --git a/cpu/arm1136/mx31/interrupts.c b/cpu/arm1136/mx31/interrupts.c
index 6e08c71..cd57071 100644
--- a/cpu/arm1136/mx31/interrupts.c
+++ b/cpu/arm1136/mx31/interrupts.c
@@ -27,30 +27,49 @@
#define TIMER_BASE 0x53f90000 /* General purpose timer 1 */
/* General purpose timers registers */
-#define GPTCR __REG(TIMER_BASE) /* Control register */
-#define GPTPR __REG(TIMER_BASE + 0x4) /* Prescaler register */
-#define GPTSR __REG(TIMER_BASE + 0x8) /* Status register */
-#define GPTCNT __REG(TIMER_BASE + 0x24) /* Counter register */
+#define GPTCR __REG(TIMER_BASE) /* Control register */
+#define GPTPR __REG(TIMER_BASE + 0x4) /* Prescaler register */
+#define GPTSR __REG(TIMER_BASE + 0x8) /* Status register */
+#define GPTCNT __REG(TIMER_BASE + 0x24) /* Counter register */
/* General purpose timers bitfields */
-#define GPTCR_SWR (1<<15) /* Software reset */
-#define GPTCR_FRR (1<<9) /* Freerun / restart */
-#define GPTCR_CLKSOURCE_32 (4<<6) /* Clock source */
-#define GPTCR_TEN (1) /* Timer enable */
+#define GPTCR_SWR (1 << 15) /* Software reset */
+#define GPTCR_FRR (1 << 9) /* Freerun / restart */
+#define GPTCR_CLKSOURCE_32 (4 << 6) /* Clock source */
+#define GPTCR_TEN 1 /* Timer enable */
+
+/* "time" is measured in 1 / CFG_HZ seconds, "tick" is internal timer period */
+#ifdef CONFIG_MX31_TIMER_HIGH_PRECISION
+/* ~0.4% error - measured with stop-watch on 100s boot-delay */
+#define TICK_TO_TIME(t) ((t) * CFG_HZ / CONFIG_MX31_CLK32)
+#define TIME_TO_TICK(t) ((unsigned long long)(t) * CONFIG_MX31_CLK32 / CFG_HZ)
+#define US_TO_TICK(t) (((unsigned long long)(t) * CONFIG_MX31_CLK32 + \
+ 999999) / 1000000)
+#else
+/* ~2% error */
+#define TICK_PER_TIME ((CONFIG_MX31_CLK32 + CFG_HZ / 2) / CFG_HZ)
+#define US_PER_TICK (1000000 / CONFIG_MX31_CLK32)
+#define TICK_TO_TIME(t) ((t) / TICK_PER_TIME)
+#define TIME_TO_TICK(t) ((unsigned long long)(t) * TICK_PER_TIME)
+#define US_TO_TICK(t) (((t) + US_PER_TICK - 1) / US_PER_TICK)
+#endif
static ulong timestamp;
static ulong lastinc;
/* nothing really to do with interrupts, just starts up a counter. */
+/* The 32768Hz 32-bit timer overruns in 131072 seconds */
int interrupt_init (void)
{
int i;
/* setup GP Timer 1 */
GPTCR = GPTCR_SWR;
- for ( i=0; i<100; i++) GPTCR = 0; /* We have no udelay by now */
+ for (i = 0; i < 100; i++)
+ GPTCR = 0; /* We have no udelay by now */
GPTPR = 0; /* 32Khz */
- GPTCR |= GPTCR_CLKSOURCE_32 | GPTCR_TEN; /* Freerun Mode, PERCLK1 input */
+ /* Freerun Mode, PERCLK1 input */
+ GPTCR |= GPTCR_CLKSOURCE_32 | GPTCR_TEN;
return 0;
}
@@ -67,7 +86,7 @@ void reset_timer(void)
reset_timer_masked();
}
-ulong get_timer_masked (void)
+unsigned long long get_ticks (void)
{
ulong now = GPTCNT; /* current tick value */
@@ -80,6 +99,17 @@ ulong get_timer_masked (void)
return timestamp;
}
+ulong get_timer_masked (void)
+{
+ /*
+ * get_ticks() returns a long long (64 bit), it wraps in
+ * 2^64 / CONFIG_MX31_CLK32 = 2^64 / 2^15 = 2^49 ~ 5 * 10^14 (s) ~
+ * 5 * 10^9 days... and get_ticks() * CFG_HZ wraps in
+ * 5 * 10^6 days - long enough.
+ */
+ return TICK_TO_TIME(get_ticks());
+}
+
ulong get_timer (ulong base)
{
return get_timer_masked () - base;
@@ -87,29 +117,20 @@ ulong get_timer (ulong base)
void set_timer (ulong t)
{
+ timestamp = TIME_TO_TICK(t);
}
/* delay x useconds AND perserve advance timstamp value */
void udelay (unsigned long usec)
{
- ulong tmo, tmp;
-
- if (usec >= 1000) { /* if "big" number, spread normalization to seconds */
- tmo = usec / 1000; /* start to normalize for usec to ticks per sec */
- tmo *= CFG_HZ; /* find number of "ticks" to wait to achieve target */
- tmo /= 1000; /* finish normalize. */
- } else { /* else small number, don't kill it prior to HZ multiply */
- tmo = usec * CFG_HZ;
- tmo /= (1000*1000);
- }
-
- tmp = get_timer (0); /* get current timestamp */
- if ( (tmo + tmp + 1) < tmp )/* if setting this forward will roll time stamp */
- reset_timer_masked (); /* reset "advancing" timestamp to 0, set lastinc value */
- else
- tmo += tmp; /* else, set advancing stamp wake up time */
- while (get_timer_masked () < tmo)/* loop till event */
- /*NOP*/;
+ unsigned long long tmp;
+ ulong tmo;
+
+ tmo = US_TO_TICK(usec);
+ tmp = get_ticks() + tmo; /* get current timestamp */
+
+ while (get_ticks() < tmp) /* loop till event */
+ /*NOP*/;
}
void reset_cpu (ulong addr)
diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c
index 76f2474..f4a0e90 100644
--- a/cpu/mpc83xx/spd_sdram.c
+++ b/cpu/mpc83xx/spd_sdram.c
@@ -274,7 +274,7 @@ long int spd_sdram()
/*
* Set up LAWBAR for all of DDR.
*/
- ecm->bar = ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff);
+ ecm->bar = CFG_DDR_SDRAM_BASE & 0xfffff000;
ecm->ar = (LAWAR_EN | LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & law_size));
debug("DDR:bar=0x%08x\n", ecm->bar);
debug("DDR:ar=0x%08x\n", ecm->ar);
diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c
index 67e81c0..f15b0a8 100644
--- a/cpu/mpc85xx/cpu.c
+++ b/cpu/mpc85xx/cpu.c
@@ -85,7 +85,8 @@ int checkcpu (void)
struct cpu_type *cpu;
#ifdef CONFIG_DDR_CLK_FREQ
volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
- u32 ddr_ratio = ((gur->porpllsr) & 0x00003e00) >> 9;
+ u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
+ >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
#else
u32 ddr_ratio = 0;
#endif
diff --git a/cpu/mpc85xx/fdt.c b/cpu/mpc85xx/fdt.c
index bc1550d..037a60f 100644
--- a/cpu/mpc85xx/fdt.c
+++ b/cpu/mpc85xx/fdt.c
@@ -152,7 +152,6 @@ static inline void ft_fixup_l2cache(void *blob)
}
fdt_setprop(blob, off, "cache-unified", NULL, 0);
fdt_setprop_cell(blob, off, "cache-block-size", line_size);
- fdt_setprop_cell(blob, off, "cache-line-size", line_size);
fdt_setprop_cell(blob, off, "cache-size", size);
fdt_setprop_cell(blob, off, "cache-sets", num_sets);
fdt_setprop_cell(blob, off, "cache-level", 2);
@@ -181,7 +180,6 @@ static inline void ft_fixup_cache(void *blob)
dnum_sets = dsize / (dline_size * dnum_ways);
fdt_setprop_cell(blob, off, "d-cache-block-size", dline_size);
- fdt_setprop_cell(blob, off, "d-cache-line-size", dline_size);
fdt_setprop_cell(blob, off, "d-cache-size", dsize);
fdt_setprop_cell(blob, off, "d-cache-sets", dnum_sets);
@@ -192,7 +190,6 @@ static inline void ft_fixup_cache(void *blob)
inum_sets = isize / (iline_size * inum_ways);
fdt_setprop_cell(blob, off, "i-cache-block-size", iline_size);
- fdt_setprop_cell(blob, off, "i-cache-line-size", iline_size);
fdt_setprop_cell(blob, off, "i-cache-size", isize);
fdt_setprop_cell(blob, off, "i-cache-sets", inum_sets);
diff --git a/cpu/mpc85xx/speed.c b/cpu/mpc85xx/speed.c
index 1cda1e3..70dfad0 100644
--- a/cpu/mpc85xx/speed.c
+++ b/cpu/mpc85xx/speed.c
@@ -54,7 +54,8 @@ void get_sys_info (sys_info_t * sysInfo)
#ifdef CONFIG_DDR_CLK_FREQ
{
- u32 ddr_ratio = ((gur->porpllsr) & 0x00003e00) >> 9;
+ u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
+ >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
if (ddr_ratio != 0x7)
sysInfo->freqDDRBus = ddr_ratio * CONFIG_DDR_CLK_FREQ;
}
@@ -101,9 +102,9 @@ int get_clocks (void)
* PORDEVSR2_SEC_CFG bit is 0 on all 85xx boards that are not an 8544.
*/
if (gur->pordevsr2 & MPC85xx_PORDEVSR2_SEC_CFG)
- gd->i2c1_clk = sys_info.freqSystemBus / 3;
- else
gd->i2c1_clk = sys_info.freqSystemBus / 2;
+ else
+ gd->i2c1_clk = sys_info.freqSystemBus / 3;
#else
/* Most 85xx SOCs use CCB/2, so this is the default behavior. */
gd->i2c1_clk = sys_info.freqSystemBus / 2;
diff --git a/doc/README.imx31 b/doc/README.imx31
new file mode 100644
index 0000000..91ef766
--- /dev/null
+++ b/doc/README.imx31
@@ -0,0 +1,29 @@
+U-Boot for Freescale i.MX31
+
+This file contains information for the port of U-Boot to the Freescale
+i.MX31 SoC.
+
+1. CONFIGURATION OPTIONS/SETTINGS
+---------------------------------
+
+1.1 Configuration of MC13783 SPI bus
+------------------------------------
+ The power management companion chip MC13783 is connected to the
+ i.MX31 via an SPI bus. Use the following configuration options
+ to setup the bus and chip select used for a particular board.
+
+ CONFIG_MC13783_SPI_BUS -- defines the SPI bus the MC13783 is connected to.
+ Note that 0 is CSPI1, 1 is CSPI2 and 2 is CSPI3.
+ CONFIG_MC13783_SPI_CS -- define the chip select the MC13783 s connected to.
+
+1.2 Timer precision
+-------------------
+ CONFIG_MX31_TIMER_HIGH_PRECISION
+
+ Enable higher precision timer. The low-precision timer
+ (default) provides approximately 4% error, whereas the
+ high-precision timer is about 0.4% accurate. The extra
+ accuracy is achieved at the cost of higher computational
+ overhead, which, in places where time is measured, should
+ not be critical, so, it should be safe to enable this
+ option.
diff --git a/doc/README.mx31 b/doc/README.mx31
deleted file mode 100644
index 291c2f3..0000000
--- a/doc/README.mx31
+++ /dev/null
@@ -1,17 +0,0 @@
-U-Boot for Freescale i.MX31
-
-This file contains information for the port of U-Boot to the Freescale
-i.MX31 SoC.
-
-1. CONFIGURATION OPTIONS/SETTINGS
----------------------------------
-
-1.1 Configuration of MC13783 SPI bus
-------------------------------------
-The power management companion chip MC13783 is connected to the
-i.MX31 via an SPI bus. Use the following configuration options
-to setup the bus and chip select used for a particular board.
-
-CONFIG_MC13783_SPI_BUS -- defines the SPI bus the MC13783 is connected to.
- Note that 0 is CSPI1, 1 is CSPI2 and 2 is CSPI3.
-CONFIG_MC13783_SPI_CS -- define the chip select the MC13783 s connected to.
diff --git a/doc/uImage.FIT/multi.its b/doc/uImage.FIT/multi.its
index b992962..1d8c2db 100644
--- a/doc/uImage.FIT/multi.its
+++ b/doc/uImage.FIT/multi.its
@@ -56,6 +56,7 @@
data = /incbin/("./eldk-4.2-ramdisk");
type = "ramdisk";
arch = "ppc";
+ os = "linux";
compression = "gzip";
hash@1 {
algo = "sha1";
@@ -67,6 +68,7 @@
data = /incbin/("./eldk-3.1-ramdisk");
type = "ramdisk";
arch = "ppc";
+ os = "linux";
compression = "gzip";
hash@1 {
algo = "crc32";
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
index 0d1ee8a..72d063a 100644
--- a/drivers/mtd/cfi_flash.c
+++ b/drivers/mtd/cfi_flash.c
@@ -1932,9 +1932,10 @@ ulong flash_get_size (ulong base, int banknum)
/* XXX - Need to test on x8/x16 in parallel. */
info->portwidth >>= 1;
}
+
+ flash_write_cmd (info, 0, 0, info->cmd_reset);
}
- flash_write_cmd (info, 0, 0, info->cmd_reset);
return (info->size);
}
diff --git a/include/asm-ppc/immap_85xx.h b/include/asm-ppc/immap_85xx.h
index 559d6ea..50c9dde 100644
--- a/include/asm-ppc/immap_85xx.h
+++ b/include/asm-ppc/immap_85xx.h
@@ -1552,6 +1552,13 @@ typedef struct par_io {
*/
typedef struct ccsr_gur {
uint porpllsr; /* 0xe0000 - POR PLL ratio status register */
+#ifdef CONFIG_MPC8536
+#define MPC85xx_PORPLLSR_DDR_RATIO 0x3e000000
+#define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT 25
+#else
+#define MPC85xx_PORPLLSR_DDR_RATIO 0x00003e00
+#define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT 9
+#endif
uint porbmsr; /* 0xe0004 - POR boot mode status register */
#define MPC85xx_PORBMSR_HA 0x00070000
uint porimpscr; /* 0xe0008 - POR I/O impedance status and control register */
diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index 55d7852..09bb87e 100644
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -174,6 +174,7 @@
#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */
#define CFG_FLASH_BASE 0xFE000000 /* start of FLASH */
#define CFG_FLASH_SIZE 8 /* flash size in MB */
+#define CFG_FLASH_PROTECTION 1 /* Use h/w Flash protection. */
#define CFG_FLASH_EMPTY_INFO /* display empty sectors */
#define CFG_FLASH_USE_BUFFER_WRITE /* buffer up multiple bytes */
@@ -596,7 +597,7 @@
#define CONFIG_FDTFILE mpc8313erdb.dtb
#define CONFIG_LOADADDR 500000 /* default location for tftp and bootm */
-#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */
+#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */
#define CONFIG_BAUDRATE 115200
#define XMK_STR(x) #x
diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h
index 5879a82..83f64c6 100644
--- a/include/configs/MPC8315ERDB.h
+++ b/include/configs/MPC8315ERDB.h
@@ -193,6 +193,7 @@
#define CFG_FLASH_BASE 0xFE000000 /* FLASH base address */
#define CFG_FLASH_SIZE 8 /* FLASH size is 8M */
+#define CFG_FLASH_PROTECTION 1 /* Use h/w Flash protection. */
#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* Window base at flash base */
#define CFG_LBLAWAR0_PRELIM 0x80000016 /* 8MB window size */
diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h
index 977142b..1ae5bae 100644
--- a/include/configs/MPC8323ERDB.h
+++ b/include/configs/MPC8323ERDB.h
@@ -181,6 +181,7 @@
#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */
#define CFG_FLASH_BASE 0xFE000000 /* FLASH base address */
#define CFG_FLASH_SIZE 16 /* FLASH size is 16M */
+#define CFG_FLASH_PROTECTION 1 /* Use h/w Flash protection. */
#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* Window base at flash base */
#define CFG_LBLAWAR0_PRELIM 0x80000018 /* 32MB window size */
@@ -570,7 +571,7 @@
#define CONFIG_FDTFILE mpc832x_rdb.dtb
#define CONFIG_LOADADDR 500000 /* default location for tftp and bootm */
-#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */
+#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */
#define CONFIG_BAUDRATE 115200
#define XMK_STR(x) #x
diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h
index 01cf557..9a9b500 100644
--- a/include/configs/MPC832XEMDS.h
+++ b/include/configs/MPC832XEMDS.h
@@ -169,6 +169,7 @@
#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */
#define CFG_FLASH_BASE 0xFE000000 /* FLASH base address */
#define CFG_FLASH_SIZE 16 /* FLASH size is 16M */
+#define CFG_FLASH_PROTECTION 1 /* Use h/w Flash protection. */
#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* Window base at flash base */
#define CFG_LBLAWAR0_PRELIM 0x80000018 /* 32MB window size */
diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index 87f1672..8135254 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -156,6 +156,7 @@
#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */
#define CFG_FLASH_BASE 0xFE000000 /* start of FLASH */
#define CFG_FLASH_SIZE 32 /* max flash size in MB */
+#define CFG_FLASH_PROTECTION 1 /* Use h/w Flash protection. */
/* #define CFG_FLASH_USE_BUFFER_WRITE */
#define CFG_BR0_PRELIM (CFG_FLASH_BASE | /* flash Base address */ \
diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
index fa0c0a7..81ea9f8 100644
--- a/include/configs/MPC8349ITX.h
+++ b/include/configs/MPC8349ITX.h
@@ -190,6 +190,7 @@ boards, we say we have two, but don't display a message if we find only one. */
#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE + 0x800000}
#define CFG_FLASH_SIZE 16 /* FLASH size in MB */
#define CFG_FLASH_SIZE_SHIFT 4 /* log2 of the above value */
+#define CFG_FLASH_PROTECTION 1 /* Use h/w Flash protection. */
/* Vitesse 7385 */
diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
index f60d7a7..baff03e 100644
--- a/include/configs/MPC8360EMDS.h
+++ b/include/configs/MPC8360EMDS.h
@@ -194,6 +194,7 @@
#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */
#define CFG_FLASH_BASE 0xFE000000 /* FLASH base address */
#define CFG_FLASH_SIZE 32 /* max FLASH size is 32M */
+#define CFG_FLASH_PROTECTION 1 /* Use h/w Flash protection. */
#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* Window base at flash base */
diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h
index 7c87388..256f156 100644
--- a/include/configs/MPC837XEMDS.h
+++ b/include/configs/MPC837XEMDS.h
@@ -229,6 +229,7 @@
#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */
#define CFG_FLASH_BASE 0xFE000000 /* FLASH base address */
#define CFG_FLASH_SIZE 32 /* max FLASH size is 32M */
+#define CFG_FLASH_PROTECTION 1 /* Use h/w Flash protection. */
#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* Window base at flash base */
#define CFG_LBLAWAR0_PRELIM 0x80000018 /* 32MB window size */
diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h
index 2ac4ad0..f818b0f 100644
--- a/include/configs/MPC837XERDB.h
+++ b/include/configs/MPC837XERDB.h
@@ -253,6 +253,7 @@
#define CFG_FLASH_BASE 0xFE000000 /* FLASH base address */
#define CFG_FLASH_SIZE 8 /* max FLASH size is 32M */
+#define CFG_FLASH_PROTECTION 1 /* Use h/w Flash protection. */
#define CFG_FLASH_EMPTY_INFO /* display empty sectors */
#define CFG_FLASH_USE_BUFFER_WRITE /* buffer up multiple bytes */
@@ -632,7 +633,7 @@
#define CONFIG_FDTFILE mpc8379_rdb.dtb
#define CONFIG_LOADADDR 500000 /* default location for tftp and bootm */
-#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */
+#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */
#define CONFIG_BAUDRATE 115200
#define XMK_STR(x) #x
diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index 2578bef..b504add 100644
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -59,7 +59,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
extern unsigned long get_board_ddr_clk(unsigned long dummy);
#endif
#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) /* sysclk for MPC85xx */
-/* #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk(0) /\* ddrclk for MPC85xx *\/ FIXME-8536*/
+#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk(0)
#define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 clock chip ref freq */
#define CONFIG_GET_CLK_FROM_ICS307 /* decode sysclk and ddrclk freq
from ICS307 instead of switches */
@@ -303,7 +303,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
*/
#define CONFIG_ID_EEPROM
#ifdef CONFIG_ID_EEPROM
-#define CONFIG_ID_EEPROM
#define CFG_I2C_EEPROM_NXID
#endif
#define CFG_I2C_EEPROM_ADDR 0x57
diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index d7e3a88..4114a42 100644
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -108,6 +108,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
#define CONFIG_CHIP_SELECTS_PER_CTRL 2
/* I2C addresses of SPD EEPROMs */
+#define CFG_SPD_BUS_NUM 1 /* SPD EEPROMS locate on I2C bus 1 */
#define SPD_EEPROM_ADDRESS1 0x51 /* CTLR 0 DIMM 0 */
#define SPD_EEPROM_ADDRESS2 0x52 /* CTLR 1 DIMM 0 */
@@ -293,11 +294,25 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
#define CONFIG_HARD_I2C /* I2C with hardware support */
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_I2C_CMD_TREE
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_EEPROM_ADDR 0x57
#define CFG_I2C_SLAVE 0x7F
-#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
-#define CFG_I2C_OFFSET 0x3100
+#define CFG_I2C_NOPROBES {{0,0x29}}/* Don't probe these addrs */
+#define CFG_I2C_OFFSET 0x3000
+#define CFG_I2C2_OFFSET 0x3100
+
+/*
+ * I2C2 EEPROM
+ */
+#define CONFIG_ID_EEPROM
+#ifdef CONFIG_ID_EEPROM
+#define CFG_I2C_EEPROM_NXID
+#endif
+#define CFG_I2C_EEPROM_ADDR 0x57
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_BUS_NUM 1
/*
* General PCI
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index efc8da4..2cc215a 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -720,6 +720,9 @@
/* Interval between registers */
#define CFG_ATA_STRIDE 4
+/* Support ATAPI devices */
+#define CONFIG_ATAPI 1
+
/*-----------------------------------------------------------------------
* Open firmware flat tree support
*-----------------------------------------------------------------------
diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h
index 60916b9..9a655aa 100644
--- a/include/configs/imx31_litekit.h
+++ b/include/configs/imx31_litekit.h
@@ -122,11 +122,9 @@
#define CFG_MEMTEST_START 0 /* memtest works on */
#define CFG_MEMTEST_END 0x10000
-#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CFG_LOAD_ADDR 0 /* default load address */
-#define CFG_HZ 32000
+#define CFG_HZ 1000
#define CONFIG_CMDLINE_EDITING 1
diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h
index bf2a8dd..1540203 100644
--- a/include/configs/imx31_phycore.h
+++ b/include/configs/imx31_phycore.h
@@ -126,7 +126,7 @@
#define CFG_LOAD_ADDR 0 /* default load address */
-#define CFG_HZ 32000
+#define CFG_HZ 1000
#define CONFIG_CMDLINE_EDITING 1
diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h
index b904d81..04790fd 100644
--- a/include/configs/mx31ads.h
+++ b/include/configs/mx31ads.h
@@ -139,11 +139,9 @@
#define CFG_MEMTEST_START 0 /* memtest works on */
#define CFG_MEMTEST_END 0x10000
-#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CFG_LOAD_ADDR CONFIG_LOADADDR
-#define CFG_HZ CONFIG_MX31_CLK32 /* use 32kHz clock as source */
+#define CFG_HZ 1000
#define CONFIG_CMDLINE_EDITING 1
diff --git a/include/libfdt.h b/include/libfdt.h
index 94c35e3..ce374fd 100644
--- a/include/libfdt.h
+++ b/include/libfdt.h
@@ -122,7 +122,7 @@
/* Low-level functions (you probably don't need these) */
/**********************************************************************/
-const void *fdt_offset_ptr(const void *fdt, int offset, int checklen);
+const void *fdt_offset_ptr(const void *fdt, int offset, unsigned int checklen);
static inline void *fdt_offset_ptr_w(void *fdt, int offset, int checklen)
{
return (void *)(uintptr_t)fdt_offset_ptr(fdt, offset, checklen);
@@ -459,6 +459,32 @@ static inline void *fdt_getprop_w(void *fdt, int nodeoffset,
uint32_t fdt_get_phandle(const void *fdt, int nodeoffset);
/**
+ * fdt_get_alias_namelen - get alias based on substring
+ * @fdt: pointer to the device tree blob
+ * @name: name of the alias th look up
+ * @namelen: number of characters of name to consider
+ *
+ * Identical to fdt_get_alias(), but only examine the first namelen
+ * characters of name for matching the alias name.
+ */
+const char *fdt_get_alias_namelen(const void *fdt,
+ const char *name, int namelen);
+
+/**
+ * fdt_get_alias - retreive the path referenced by a given alias
+ * @fdt: pointer to the device tree blob
+ * @name: name of the alias th look up
+ *
+ * fdt_get_alias() retrieves the value of a given alias. That is, the
+ * value of the property named 'name' in the node /aliases.
+ *
+ * returns:
+ * a pointer to the expansion of the alias named 'name', of it exists
+ * NULL, if the given alias or the /aliases node does not exist
+ */
+const char *fdt_get_alias(const void *fdt, const char *name);
+
+/**
* fdt_get_path - determine the full path of a node
* @fdt: pointer to the device tree blob
* @nodeoffset: offset of the node whose path to find
diff --git a/include/mpc83xx.h b/include/mpc83xx.h
index 5d82bb4..7f30d683 100644
--- a/include/mpc83xx.h
+++ b/include/mpc83xx.h
@@ -528,7 +528,7 @@
#if defined(CONFIG_MPC834X)
#define HRCWH_ROM_LOC_PCI2 0x00200000
#endif
-#if defined(CONIFG_MPC837X)
+#if defined(CONFIG_MPC837X)
#define HRCWH_ROM_LOC_ON_CHIP_ROM 0x00300000
#endif
#define HRCWH_ROM_LOC_LOCAL_8BIT 0x00500000
diff --git a/lib_arm/board.c b/lib_arm/board.c
index 5ade882..f02fdc8 100644
--- a/lib_arm/board.c
+++ b/lib_arm/board.c
@@ -220,18 +220,6 @@ static int init_func_i2c (void)
}
#endif
-#ifdef CONFIG_SKIP_RELOCATE_UBOOT
-/*
- * This routine sets the relocation done flag, because even if
- * relocation is skipped, the flag is used by other generic code.
- */
-static int reloc_init(void)
-{
- gd->flags |= GD_FLG_RELOC;
- return 0;
-}
-#endif
-
/*
* Breathe some life into the board...
*
@@ -261,11 +249,6 @@ int print_cpuinfo (void); /* test-only */
init_fnc_t *init_sequence[] = {
cpu_init, /* basic cpu dependent setup */
-#if defined(CONFIG_SKIP_RELOCATE_UBOOT)
- reloc_init, /* Set the relocation done flag, must
- do this AFTER cpu_init(), but as soon
- as possible */
-#endif
board_init, /* basic board dependent setup */
interrupt_init, /* set up exceptions */
env_init, /* initialize environment */
@@ -307,6 +290,8 @@ void start_armboot (void)
gd->bd = (bd_t*)((char*)gd - sizeof(bd_t));
memset (gd->bd, 0, sizeof (bd_t));
+ gd->flags |= GD_FLG_RELOC;
+
monitor_flash_len = _bss_start - _armboot_start;
for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
diff --git a/lib_ppc/bootm.c b/lib_ppc/bootm.c
index 38266e1..5af25dd 100644
--- a/lib_ppc/bootm.c
+++ b/lib_ppc/bootm.c
@@ -145,7 +145,7 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
* if the user wants it (the logic is in the subroutines).
*/
if (of_size) {
- if (fdt_chosen(of_flat_tree, 0) < 0) {
+ if (fdt_chosen(of_flat_tree, 1) < 0) {
puts ("ERROR: ");
puts ("/chosen node create failed");
puts (" - must RESET the board to recover.\n");
diff --git a/libfdt/fdt.c b/libfdt/fdt.c
index 732103b..a59a518 100644
--- a/libfdt/fdt.c
+++ b/libfdt/fdt.c
@@ -78,7 +78,7 @@ int fdt_check_header(const void *fdt)
return 0;
}
-const void *fdt_offset_ptr(const void *fdt, int offset, int len)
+const void *fdt_offset_ptr(const void *fdt, int offset, unsigned int len)
{
const char *p;
diff --git a/libfdt/fdt_ro.c b/libfdt/fdt_ro.c
index b09a6e9..b705f91 100644
--- a/libfdt/fdt_ro.c
+++ b/libfdt/fdt_ro.c
@@ -145,17 +145,12 @@ int fdt_path_offset(const void *fdt, const char *path)
/* see if we have an alias */
if (*path != '/') {
- const char *q;
- int aliasoffset = fdt_path_offset(fdt, "/aliases");
-
- if (aliasoffset < 0)
- return -FDT_ERR_BADPATH;
+ const char *q = strchr(path, '/');
- q = strchr(path, '/');
if (!q)
q = end;
- p = fdt_getprop_namelen(fdt, aliasoffset, path, q - p, NULL);
+ p = fdt_get_alias_namelen(fdt, p, q - p);
if (!p)
return -FDT_ERR_BADPATH;
offset = fdt_path_offset(fdt, p);
@@ -306,6 +301,23 @@ uint32_t fdt_get_phandle(const void *fdt, int nodeoffset)
return fdt32_to_cpu(*php);
}
+const char *fdt_get_alias_namelen(const void *fdt,
+ const char *name, int namelen)
+{
+ int aliasoffset;
+
+ aliasoffset = fdt_path_offset(fdt, "/aliases");
+ if (aliasoffset < 0)
+ return NULL;
+
+ return fdt_getprop_namelen(fdt, aliasoffset, name, namelen, NULL);
+}
+
+const char *fdt_get_alias(const void *fdt, const char *name)
+{
+ return fdt_get_alias_namelen(fdt, name, strlen(name));
+}
+
int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen)
{
int pdepth = 0, p = 0;
@@ -320,9 +332,6 @@ int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen)
for (offset = 0, depth = 0;
(offset >= 0) && (offset <= nodeoffset);
offset = fdt_next_node(fdt, offset, &depth)) {
- if (pdepth < depth)
- continue; /* overflowed buffer */
-
while (pdepth > depth) {
do {
p--;
@@ -330,14 +339,16 @@ int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen)
pdepth--;
}
- name = fdt_get_name(fdt, offset, &namelen);
- if (!name)
- return namelen;
- if ((p + namelen + 1) <= buflen) {
- memcpy(buf + p, name, namelen);
- p += namelen;
- buf[p++] = '/';
- pdepth++;
+ if (pdepth >= depth) {
+ name = fdt_get_name(fdt, offset, &namelen);
+ if (!name)
+ return namelen;
+ if ((p + namelen + 1) <= buflen) {
+ memcpy(buf + p, name, namelen);
+ p += namelen;
+ buf[p++] = '/';
+ pdepth++;
+ }
}
if (offset == nodeoffset) {
@@ -347,7 +358,7 @@ int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen)
if (p > 1) /* special case so that root path is "/", not "" */
p--;
buf[p] = '\0';
- return p;
+ return 0;
}
}