summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--CHANGELOG3
-rw-r--r--include/configs/PPChameleonEVB.h50
2 files changed, 12 insertions, 41 deletions
diff --git a/CHANGELOG b/CHANGELOG
index c058cc4..20c6cf2 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,9 @@
Changes for U-Boot 1.0.0:
======================================================================
+* Patch by llandre, 11 Sep 2003:
+ update configuration for PPChameleonEVB board
+
* Patch by David Müller, 13 Sep 2003:
various changes to VCMA9 board specific files
diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h
index be36ff4..7c7b98c 100644
--- a/include/configs/PPChameleonEVB.h
+++ b/include/configs/PPChameleonEVB.h
@@ -55,47 +55,17 @@
#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#if 0
-#define CONFIG_PREBOOT \
- "crc32 f0207004 ffc 0;" \
- "if cmp 0 f0207000 1;" \
- "then;echo Old CRC is correct;crc32 f0207004 ff4 f0207000;" \
- "else;echo Old CRC is bad;fi"
-#endif
-
#undef CONFIG_BOOTARGS
-#define CONFIG_RAMBOOTCOMMAND \
- "setenv bootargs root=/dev/ram rw " \
- "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname):$(netdev):off;" \
- "bootm ffc00000 ffca0000"
-#define CONFIG_NFSBOOTCOMMAND \
- "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
- "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname):$(netdev):off;" \
- "bootm ffc00000"
-
-#define CONFIG_PELK_NOR_KERNEL_NOR_RAMDISK_BOOTCOMMAND \
- "setenv ipaddr 192.168.10.203;" \
- "setenv serverip 192.168.10.6;" \
- "setenv netmask 255.255.255.0;" \
- "setenv bootargs root=/dev/ram rw console=ttyS0,9600;" \
- "setenv autostart yes;" \
- "bootm ffc00000 ffd00000"
-/*
- "setenv ethaddr 00:50:c2:1e:af:fe;" \
- "setenv eth1addr 00:50:c2:1e:af:fd;" \
-*/
-#define CONFIG_BOOTCOMMAND CONFIG_PELK_NOR_KERNEL_NOR_RAMDISK_BOOTCOMMAND
+/* Ethernet stuff */
+#define CONFIG_ENV_OVERWRITE /* Let the user to change the Ethernet MAC addresses */
+#define CONFIG_ETHADDR 00:50:c2:1e:af:fe
+#define CONFIG_ETH1ADDR 00:50:c2:1e:af:fd
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-/* EThernet stuff */
-#define CONFIG_ENV_OVERWRITE /* Let the user to change the Ethernet MAC addresses */
-#define CONFIG_ETHADDR 00:50:c2:1e:af:fe
-#define CONFIG_ETH1ADDR 00:50:c2:1e:af:fd
-
#undef CONFIG_EXT_PHY
#define CONFIG_MII 1 /* MII PHY management */
@@ -548,18 +518,16 @@
#if 1 /* test-only */
#define CONFIG_NO_SERIAL_EEPROM
/*#undef CONFIG_NO_SERIAL_EEPROM*/
-/*----------------------------------------------------------------------------*/
-/*----------------------------------------------------------------------------*/
-/*----------------------------------------------------------------------------*/
+/*--------------------------------------------------------------------*/
#ifdef CONFIG_NO_SERIAL_EEPROM
/*
-!-------------------------------------------------------------------------------
+!-----------------------------------------------------------------------
! Defines for entry options.
! Note: Because the 405EP SDRAM controller does not support ECC, ECC DIMMs that
! are plugged in the board will be utilized as non-ECC DIMMs.
-!-------------------------------------------------------------------------------
+!-----------------------------------------------------------------------
*/
#undef AUTO_MEMORY_CONFIG
#define DIMM_READ_ADDR 0xAB
@@ -678,10 +646,10 @@
#define PLL_PCIDIV_4 0x00000003
/*
-!-------------------------------------------------------------------------------
+!-----------------------------------------------------------------------
! PLL settings for 266MHz CPU, 133MHz PLB/SDRAM, 66MHz EBC, 33MHz PCI,
! assuming a 33.3MHz input clock to the 405EP.
-!-------------------------------------------------------------------------------
+!-----------------------------------------------------------------------
*/
#define PLLMR0_133_66_66_33 (PLL_CPUDIV_1 | PLL_PLBDIV_1 | \
PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 | \